Renesas Electronics

R5F10PMEKFB#V5 - 16-Bit RL78/F14 MCU | Renesas

Teilenummer: R5F10PMEKFB#V5 ✓ Aktiv
LFQFP Package 48 KB to 256 KB Memory
MOQ: 1 |

R5F10PMEKFB#V5 Übersicht

Renesas Electronics R5F10PMEKFB#V5 is a 16-bit RL78/F14 embedded microcontroller in an LFQFP package. The RL78/F14 family is positioned as the upper-level member of the RL78 series, with a family lineup spanning 30 to 100 pins and 48 to 256 KB of flash memory. The target integrates CAN and LIN communication modules, supports BLDC motor control, and includes functional-safety-oriented features alongside timer RD and comparator resources.

An embedded microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, peripherals, and input/output ports on one integrated circuit. Within the system hierarchy, R5F10PMEKFB#V5 belongs to the microcontroller class, then to the 16-bit MCU category, and finally to Renesas’s RL78/F14 family. Such devices are commonly used where compact control, low power consumption, automotive communication, and real-time peripheral handling are required in the same design.

The family’s defining benefits include built-in CAN and LIN interfaces, reducing the need for separate communication controllers in automotive and industrial equipment. Its BLDC motor-control support makes it relevant to electric motor systems, while timer RD and comparator resources support timing, waveform, and feedback functions. The RL78 architecture is aimed at low-consumption embedded control, helping equipment maintain useful operation where system energy budgets are constrained.

The exact target order code is identified as an LFQFP microcontroller with a 16-bit core. Its precise flash capacity, RAM capacity, operating frequency, I/O count, supply range, temperature grade, and peripheral allocation depend on the individual RL78/F14 device number and must be confirmed in the manufacturer’s ordering information and datasheet before schematic or firmware decisions are finalized. Its communication and motor-control feature set remains aligned with the broader RL78/F14 positioning.

Typical uses include automotive body and interface controllers, industrial automation modules, motor-control nodes, CAN or LIN communication gateways, and compact embedded control boards. In these applications, the integrated interfaces can simplify board wiring, while the 16-bit architecture supports control tasks requiring more data width than an 8-bit MCU. Equipment designers should still budget peripheral channels, timers, and I/O against the specific device variant.

PCB design should use the manufacturer’s LFQFP land pattern and pin-description table. Confirm pin multiplexing, debug signals, reset behavior, clock requirements, and available communication pins before assigning board functions. Firmware should also account for low-power modes, wake-up sources, and peripheral initialization order if the design depends on low standby consumption.

This page organizes the R5F10PMEKFB#V5 family capabilities, verified ordering references, pinout constraints, application fit, and replacement questions into an engineering-focused guide. It helps designers distinguish communication-rich RL78/F14 options from MCU alternatives and identify which configuration details must still be confirmed before production release.

Drop-in-Alternativen für R5F10PMEKFB#V5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

R5F10PMEKFB#X5

✅ Drop-In
📦 LFQFP
Same R5F10PMEK device and LFQFP package designation; order-code conditions may differ by up to 30% in temperature, quality, or delivery qualification.

📋 Referenzalternative (nicht im Katalog)

R5F10PMEKFB#H5

✅ Drop-In
📦 LFQFP
Same R5F10PMEK device and LFQFP package designation; the H5 ordering suffix may change qualification or delivery conditions, with key device ratings remaining within 30%.

📋 Referenzalternative (nicht im Katalog)

R5F10PMEKFB#V5 Grenzwerte & elektrische Eigenschaften

Product Type 16-bit embedded microcontroller
Series RL78/F14
Core Architecture 16-bit
Package Type LFQFP
Program Flash Range for RL78/F14 Family 48 KB to 256 KB
CAN Interface Built-in CAN module
LIN Interface Built-in LIN module
Motor Control Support BLDC motor control support
Functional Safety Features Supported by the RL78/F14 family
Timer Resource Timer RD
Comparator Resource Comparator
RL78/F14 Family Pin Range 30 pins to 100 pins
Power Consumption Positioning Low-consumption RL78 family architecture
Montageart Surface mount

R5F10PMEKFB#V5 lfqfp Pinbelegungsleitfaden

Pinbelegung für R5F10PMEKFB#V5 (lfqfp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für R5F10PMEKFB#V5 im lfqfp-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für R5F10PMEKFB#V5.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

R5F10PMEKFB#V5 ist geeignet für 6 Anwendungs: Automotive CAN Interface Controller, LIN Network Body Module, BLDC Motor Control Node, Industrial Automation Controller, Battery-Powered Embedded Equipment, Condition Monitoring and Sensor Hub.

🚗

Automotive CAN Interface Controller

The R5F10PMEKFB#V5 fits automotive interface-control nodes because the RL78/F14 family includes a built-in CAN module and operates as a compact 16-bit microcontroller. That combination allows a controller to manage diagnostic messaging, state handling, and connected peripheral logic without relying on a separate CAN transceiver or communications processor. The LFQFP package also supports conventional surface-mount PCB assembly. Engineering checks should include the exact CAN channel count, selected I/O pins, transceiver requirements, bus timing, fault handling, and the temperature grade required by the vehicle platform.

🚗

LIN Network Body Module

The R5F10PMEKFB#V5 is appropriate for LIN-connected body and comfort modules because its RL78/F14 feature set includes a built-in LIN module. A 16-bit core can coordinate local inputs, actuator commands, diagnostics, and network timing while retaining low-consumption characteristics suited to embedded vehicle equipment. The implementation should use a qualified LIN transceiver, validate wake-up and sleep behavior, and confirm that the exact suffix provides the required temperature and quality conditions.

⚡

BLDC Motor Control Node

The R5F10PMEKFB#V5 can serve as the controller in a compact BLDC motor-control node because the RL78/F14 family supports BLDC motor control and includes timer RD and comparator resources useful for timing and feedback functions. Designers can use these peripherals for commutation, protection, and closed-loop control tasks while the 16-bit processor handles higher-level sequencing. A production design still needs a suitable gate driver, power stage, current sensing, fault shutdown path, and motor-specific firmware validated across speed and load conditions.

🏭

Industrial Automation Controller

The R5F10PMEKFB#V5 is suitable for industrial automation modules that need local control, communication, and low-consumption operation in a compact surface-mount package. Its 16-bit RL78/F14 architecture and integrated CAN or LIN connectivity can support sensor aggregation, actuator sequencing, equipment state monitoring, and network diagnostics. For industrial deployment, verify the exact I/O budget, timer allocation, operating-temperature range, supply limits, isolation strategy, and any functional-safety requirements imposed by the machinery being controlled.

🔋

Battery-Powered Embedded Equipment

The R5F10PMEKFB#V5 can support battery-powered embedded equipment where a 16-bit controller and low-consumption RL78 architecture are preferred over a more capable 32-bit processor. Its integrated communication modules reduce the component count for connected devices, while the LFQFP package permits compact board layouts. To obtain the intended battery benefit, firmware should make extensive use of the device’s low-power modes, and the electrical-characteristics table should be evaluated with the real standby, wake-up, and active-load duty cycle.

🧩

Condition Monitoring and Sensor Hub

The R5F10PMEKFB#V5 can serve as a local sensor-hub controller in equipment that monitors temperature, vibration, position, or actuator feedback. The 16-bit processing core provides a practical balance for digital filtering and control, while comparator and timer resources assist with threshold detection and periodic sampling. Integrated CAN or LIN connectivity allows the hub to forward processed information to a larger controller. Signal-chain design must still account for sensor excitation, analog conditioning, grounding, filtering, calibration, and the specific peripheral assignments of the target suffix.

Zusammenfassung der empfohlenen Produkte

R5F10PMEKFB#X5 Same-device alternative for ordering and qualification review Verwendet in: Automotive CAN Interface Controller, LIN Network Body Module, BLDC Motor Control Node, Industrial Automation Controller, Battery-Powered Embedded Equipment, Condition Monitoring and Sensor Hub R5F10PMEKFB#H5 Same-family LFQFP candidate for configuration review Verwendet in: Automotive CAN Interface Controller, LIN Network Body Module, BLDC Motor Control Node, Industrial Automation Controller, Battery-Powered Embedded Equipment, Condition Monitoring and Sensor Hub
What is the Renesas R5F10PMEKFB#V5?
The Renesas R5F10PMEKFB#V5 is a 16-bit RL78/F14 embedded microcontroller packaged in an LFQFP. According to the Renesas product information, the RL78/F14 family includes built-in CAN and LIN modules, BLDC motor-control support, functional-safety features, timer RD, and comparator resources. It is positioned for low-consumption automotive and industrial embedded-control designs.
What communications interfaces does R5F10PMEKFB#V5 support?
The R5F10PMEKFB#V5 supports built-in CAN and LIN communication interfaces through its RL78/F14 feature set. These interfaces are important for automotive and industrial systems that connect node controllers to vehicle networks, body modules, actuators, and diagnostic equipment. Use the Renesas pin-description table to determine the available channel count and assigned port pins for this exact order code.
Is R5F10PMEKFB#V5 suitable for BLDC motor control?
Yes, the R5F10PMEKFB#V5 is suitable for BLDC motor-control designs because the RL78/F14 family supports BLDC motor control. The application still requires an appropriate gate-driver interface, position sensing or sensorless-control strategy, current protection, and firmware tuned to the motor and power stage. Confirm the exact timer and comparator assignments in the manufacturer datasheet.
Where can I download the R5F10PMEKFB#V5 datasheet PDF?
The R5F10PMEKFB#V5 datasheet PDF can be located through the Renesas RL78/F14 part-details page and the linked device documentation. The listing also identifies a PDF copy for the exact V5 order code. Before releasing the design, compare the ordering code, package drawing, pin table, electrical limits, and peripheral assignments against the PCB and firmware requirements.
Where can I find the R5F10PMEKFB#V5 pinout?
The R5F10PMEKFB#V5 pinout is found in the pin-description table and package drawing in the Renesas device documentation. The exact signal names, multiplexing options, and exposed thermal or ground connections must be taken from that table because generic LFQFP drawings do not define MCU functions. A complete pin map is not presented here because the device-level pin table was not available.
How does R5F10PMEKFB#V5 compare with R5F10PMEKFB#X5?
R5F10PMEKFB#V5 and R5F10PMEKFB#X5 are closely related RL78/F14 order codes with the same MEK device and LFQFP package designation. Their configuration differences must be checked against the manufacturer ordering table before substitution, particularly operating-temperature, quality, terminal, and delivery conditions. The X5-listed manufacturer page provides the most direct starting point for the shared device family.
Can R5F10PMEKFB#X5 replace R5F10PMEKFB#V5?
R5F10PMEKFB#X5 is the closest same-package candidate located for R5F10PMEKFB#V5, but replacement approval depends on the ordering-code differences and operating requirements. Verify temperature grade, quality grade, terminal finish, delivery configuration, and lifecycle status in the Renesas ordering information. If any of those attributes differ, treat the substitution as a new qualification rather than an automatic drop-in change.
What can replace R5F10PMEKFB#V5 in an automotive control design?
The closest located replacement is R5F10PMEKFB#X5 because it retains the same R5F10PMEK device family and LFQFP package designation. A true drop-in decision still requires confirmation of pin functions, electrical ratings, peripheral configuration, temperature grade, and software-device identifiers. No cross-brand replacement was established because an automotive MCU must also match communication, safety, and qualification requirements.
When should I choose the RL78/F14 over an 8-bit or 32-bit MCU?
Choose an RL78/F14-based device when the design needs a 16-bit controller, low-consumption operation, integrated CAN and LIN modules, and support for BLDC motor control. An 8-bit MCU may be simpler for basic sequencing, while a 32-bit MCU may be preferable for intensive computation or larger software workloads. The decisive factors here are peripheral integration, control bandwidth, memory, and qualification rather than core width alone.
Is R5F10PMEKFB#V5 suitable for industrial automation and motor-drive modules?
The R5F10PMEKFB#V5 is suitable for compact industrial automation or motor-drive modules that benefit from 16-bit control, CAN or LIN connectivity, and low-consumption operation. Integration can reduce external communications hardware, but designers must verify the available I/O, timer channels, analog functions, supply limits, and package pin assignments for the exact device before finalizing the module architecture.
How much power does the R5F10PMEKFB#V5 consume?
The R5F10PMEKFB#V5 belongs to the low-consumption RL78/F14 family, but its operating current depends on clock speed, active peripherals, I/O loading, voltage, and sleep mode. Use the manufacturer’s electrical-characteristics table for active, halt, and standby currents. Compare those figures with the complete system duty cycle rather than selecting on a single nominal current value.
What programming and debug resources should I check before using R5F10PMEKFB#V5?
Before using the R5F10PMEKFB#V5, confirm the exact programming interface, debug pins, reset behavior, clock source, and flash-programming procedure in the Renesas device documentation. The supplied listing does not define a programming protocol or development-tool compatibility list, so those details should not be inferred from the 16-bit core designation. Use the device handbook and programming documentation for the selected suffix.
Is R5F10PMEKFB#V5 compliant with RoHS and REACH?
The RoHS and REACH status of R5F10PMEKFB#V5 must be confirmed for the exact order code in Renesas environmental or material-compliance documentation. The current product information establishes the RL78/F14 family and its communication features but does not state a compliance declaration for this target. Record the applicable declaration before production release rather than assuming family-level status.
Where can I request a quote and current lead time for R5F10PMEKFB#V5?
Current commercial availability, lead time, minimum order quantity, and delivery conditions for R5F10PMEKFB#V5 should be requested through the Request a Quote form on this page. The form allows the exact MPN, target quantity, package, and delivery requirements to be included. The manufacturer’s ordering information should also be checked before committing a production schedule.
What are the key specifications of R5F10PMEKFB#V5 that engineers should know?
The key engineering facts are the 16-bit RL78/F14 architecture, LFQFP package, built-in CAN and LIN modules, BLDC motor-control support, functional-safety features, timer RD, and comparator resources. The broader family spans 30 to 100 pins and 48 to 256 KB of flash. Target-specific memory, frequency, I/O, voltage, and temperature limits remain order-code-specific and should be taken from the manufacturer datasheet.

Technische Referenzdaten für R5F10PMEKFB#V5 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose R5F10PMEKFB#V5 when a compact 16-bit controller must combine low-consumption operation, built-in CAN or LIN connectivity, and support for BLDC motor control. It is particularly suitable for automotive interface nodes, industrial automation modules, and connected sensor or motor-control equipment. Select R5F10PMEKFB#X5 when its ordering conditions better match the required temperature, quality, or delivery configuration while retaining the same base device and LFQFP footprint. Consider R5F10PMEKFB#H5 only after confirming its qualification and delivery differences. A generic 8-bit MCU may be sufficient for simple sequencing, but it will not offer the same 16-bit control bandwidth or integrated vehicle-network interfaces. A 32-bit MCU may be preferable for unusually compute-intensive software. Before final selection, verify the target’s flash, RAM, I/O count, frequency, timers, analog resources, voltage limits, temperature grade, and programming configuration against the complete system requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt R5F10PMEKFB#X5 R5F10PMEKFB#H5
Package LFQFP LFQFP LFQFP
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Series RL78/F14 RL78/F14 RL78/F14
Core Architecture 16-bit 16-bit 16-bit
CAN Interface Built-in Built-in Built-in
LIN Interface Built-in Built-in Built-in
BLDC Motor Control Support Supported Supported Supported
Timer and Comparator Resources Timer RD and comparator Timer RD and comparator Timer RD and comparator

Wichtigste Unterscheidungsmerkmale

  • Integrated vehicle-network connectivity (vs. R5F10PMEKFB#X5)
  • 16-bit control with BLDC support (vs. R5F10PMEKFB#H5)
  • Low-consumption communication platform (vs. Generic 8-bit MCU without integrated CAN and LIN)

Designhinweise

Use the Renesas LFQFP land pattern and pin table for the exact R5F10PMEK device rather than relying on a generic package drawing. Confirm exposed-pad or thermal-pad requirements, exposed-lead geometry, solder-mask clearance, and paste coverage. A single generic LFQFP footprint can have different lead spans and exposed-pad dimensions, so PCB library geometry must be checked against the official package drawing before release.

Plan CAN and LIN routing to keep communication traces short, controlled, and away from noisy motor-switching paths. Match the selected transceiver layout, provide the required protection and common-mode network components, and route return paths to minimize loop area. For BLDC systems, separate gate-drive and power-stage routing from sensitive sensing and MCU ground paths, while following the manufacturer’s recommended decoupling arrangement.

Decide whether the RL78/F14 low-power modes are central to the power budget before fixing the external power architecture. Review active, halt, standby, and wake-up currents in the electrical-characteristics table for the exact suffix, then include peripheral load and regulator quiescent current in the calculation. Use the device’s power and ground pins as specified in the pin-description table rather than assuming every LFQFP lead has the same function.

Do not treat the X5 and H5 suffix variants as interchangeable without reviewing the ordering-code definitions. Temperature range, quality grade, terminal condition, delivery form, and product status may differ even though the base R5F10PMEK device and LFQFP designation remain the same. After any substitution, recheck the electrical limits, pin functions, clock configuration, peripheral options, programming identifiers, and firmware target before production use.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance and qualification attributes for the exact R5F10PMEKFB#V5 order code were not stated. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with Renesas for the selected suffix before production release.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

R5F10PMEKFB#V5 datasheet R5F10PMEKFB#V5 pinout R5F10PMEKFB#V5 datasheet pdf R5F10PMEKFB#V5 equivalent R5F10PMEKFB#V5 replacement R5F10PMEKFB#V5 price R5F10PMEKFB#V5 stock Renesas R5F10PMEKFB#V5 R5F10PMEKFB#V5 LFQFP R5F10PMEKFB#V5 CAN LIN microcontroller R5F10PMEKFB#V5 BLDC motor control R5F10PMEKFB#V5 vs R5F10PMEKFB#X5 R5F10PMEKFB#V5 application circuit R5F10PMEKFB#V5 lead time

Verwandte Bauteile & Begriffe

Renesas Electronics R5F10PMEKFB#V5 R5F10PMEKFB#X5 R5F10PMEKFB#H5 RL78/F14 RL78 embedded microcontroller 16-bit microcontroller microcontroller IC semiconductor CAN module LIN module BLDC motor control timer RD comparator functional safety LFQFP surface mount automotive electronics industrial automation low power consumption embedded control Renesas cross reference
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen