Renesas Electronics

R5F10ALELFB#V5 - 16-bit RL78/F13 MCU | Renesas

Teilenummer: R5F10ALELFB#V5 ✓ Aktiv
LFQFP Package 16 KB to 128 KB Memory
MOQ: 1 |

R5F10ALELFB#V5 Übersicht

The Renesas Electronics R5F10ALELFB#V5 is a 16-bit RL78/F13 microcontroller designed for compact, low-power embedded systems and packaged in an LFQFP configuration. The RL78/F13 family combines flash-programmable embedded control with low standby and operating consumption, automotive-oriented communication interfaces, and safety-focused peripherals. The R5F10ALELFB#V5 is identified in the product listing as a microcontroller IC, making it suitable for control-intensive products requiring an efficient 16-bit architecture rather than a higher-complexity application processor.

An MCU is a semiconductor that integrates a CPU core, program memory, data memory, peripheral interfaces, and I/O ports on one device. It belongs to the embedded-controller hierarchy, where firmware executes real-time control tasks without requiring a separate external processor. RL78 microcontrollers occupy the low-power embedded segment and are used where compact code execution, fast interrupt handling, deterministic peripheral access, and low standby consumption are more important than workstation-class computing.

The Renesas RL78/F13 family supports devices from 20 to 80 pins with flash-memory configurations spanning 16 KB to 128 KB across the family. Family-level features include CAN and LIN interfaces for vehicle networking, RAM ECC for memory-data protection, PLL lock detection, and port-output-state monitoring. These capabilities allow the MCU to manage mixed analog and digital control tasks while supporting robust communication and diagnostic behavior in industrial, appliance, meter, and automotive-adjacent equipment.

Communication peripherals are particularly important in motor-control and appliance designs. CAN provides deterministic multi-node messaging, while LIN supports lower-cost communication with sensors and actuators over a single-wire network. The RL78/F13 platform also integrates safety mechanisms that can assist designers in reducing system faults and verifying critical I/O behavior. The exact flash size, RAM capacity, clock configuration, and peripheral mix for the V5 suffix must be confirmed from the ordering-information table before final firmware and board design.

Typical uses include motor controllers, air-conditioner and appliance control boards, industrial sensors, automotive interface modules, and compact instrumentation. Designers can use the 16-bit CPU and low-power architecture for real-time control loops while retaining dedicated communication channels for external nodes. The LFQFP package also supports conventional PCB assembly methods and provides clearly separated leads for inspection and rework.

For a new layout, place decoupling capacitors at each supply pin, keep clock and reset traces short, and route communication interfaces away from switching power stages. Confirm the exact pin assignments, peripheral availability, electrical limits, and programming configuration from the manufacturer datasheet before releasing the PCB or production firmware. This page consolidates product identification, application guidance, design cautions, and replacement criteria for faster engineering review.

Drop-in-Alternativen für R5F10ALELFB#V5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

R5F10ALELFB#V5 Grenzwerte & elektrische Eigenschaften

Product Type 16-bit Microcontroller IC
Product Family RL78/F13
CPU Bit Width 16 bit
Package Type LFQFP
Family Flash-Memory Range 16 KB to 128 KB
Family Pin-Count Range 20 to 80 pins
CAN Interface Built into the RL78/F13 family
LIN Interface Built into the RL78/F13 family
RAM ECC Supported by the RL78/F13 family
PLL Lock Function Supported by the RL78/F13 family
Port Output State Monitoring Supported by the RL78/F13 family

R5F10ALELFB#V5 lfqfp Pinbelegungsleitfaden

Pinbelegung für R5F10ALELFB#V5 (lfqfp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für R5F10ALELFB#V5 im lfqfp-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für R5F10ALELFB#V5.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

R5F10ALELFB#V5 ist geeignet für 6 Anwendungs: Automotive Network Interface Controller, Air-Conditioner Control Board, Industrial Sensor Hub, Motor Control Module, Smart Metering Device, Low-Power Household Appliance.

🚗

Automotive Network Interface Controller

The R5F10ALELFB#V5 fits compact automotive interface modules that need efficient 16-bit control and communication with distributed vehicle nodes. Its RL78/F13 family includes CAN and LIN interfaces, enabling one microcontroller to handle supervisory logic and low-cost sensor or actuator communication. Family-level RAM ECC, PLL lock detection, and port-output-state monitoring support more robust diagnostic behavior. The external CAN and LIN transceivers remain separate from the MCU. Before schematic release, confirm the V5 suffix electrical limits, qualification status, clock configuration, and exact communication-channel count in the manufacturer datasheet.

🏭

Air-Conditioner Control Board

The R5F10ALELFB#V5 is suitable for an air-conditioner controller where a low-power 16-bit MCU must coordinate sensors, relays, fan outputs, and user interfaces. The RL78/F13 architecture is intended for compact embedded control rather than high-level computing, while its family communication features can support connected equipment. Low standby consumption is valuable when the controller spends substantial time idle. Engineering validation should confirm the exact timer channels, PWM outputs, analog inputs, supply range, and memory capacity associated with the V5 suffix before assigning motor, display, or communications functions.

🧩

Industrial Sensor Hub

The R5F10ALELFB#V5 can serve as the local controller in a compact industrial sensor hub that gathers inputs, filters measurements, manages status information, and communicates with a wider network. Its 16-bit RL78/F13 core provides an efficient embedded-control platform, while the family's CAN and LIN options support connection to wired nodes. RAM ECC and port-output-state monitoring can improve diagnostic confidence when the design requires dependable internal behavior. Confirm the precise flash and RAM sizes, ADC resources, timers, and communication-channel allocation for the exact ordering code before finalizing firmware.

⚡

Motor Control Module

The R5F10ALELFB#V5 can support a low-power motor-control module when the application prioritizes deterministic embedded control and compact communications. The 16-bit RL78/F13 platform is suited to sequencing motor states, interpreting feedback, handling operator commands, and reporting faults. Its family-level CAN or LIN capability can reduce the number of separate interface components in a distributed machine. The MCU does not replace the power stage, gate driver, current sensing network, or protection hardware. Engineers must verify timer resolution, PWM resources, analog channels, clock accuracy, and thermal conditions in the exact V5 datasheet.

🌐

Smart Metering Device

The R5F10ALELFB#V5 is appropriate for a compact smart-metering peripheral that must measure inputs, maintain operating state, and exchange information through a wired network. The low-power RL78/F13 family is designed around embedded-control efficiency, and integrated CAN or LIN capability can support connectivity to sensors or neighboring nodes. Family features such as RAM ECC, PLL lock detection, and output-state monitoring provide useful diagnostic mechanisms. Metering accuracy still depends on the selected analog front end, reference design, calibration method, and firmware. Confirm exact ADC, timer, memory, and interface resources for the V5 suffix before production release.

🔧

Low-Power Household Appliance

The R5F10ALELFB#V5 fits low-power household appliance controllers that combine timing, input handling, output control, and optional communications in one embedded device. The 16-bit RL78/F13 core suits responsive control tasks without an application processor, and the family's low-consumption design emphasis supports efficient standby operation. A connected appliance can use CAN or LIN where appropriate, while RAM ECC and port monitoring add diagnostic value. Before schematic approval, verify the V5 suffix supply limits, analog resources, display or communications interfaces, memory capacity, and operating-temperature range against the manufacturer documentation.

Zusammenfassung der empfohlenen Produkte

R5F10ALELFB#V5 Renesas Electronics Verwendet in: Automotive Network Interface Controller, Air-Conditioner Control Board, Industrial Sensor Hub, Motor Control Module, Smart Metering Device, Low-Power Household Appliance R5F10ALELFB#X5 Closely identified RL78/F13 ordering variant Verwendet in: Automotive Network Interface Controller, Air-Conditioner Control Board, Industrial Sensor Hub, Motor Control Module, Smart Metering Device, Low-Power Household Appliance
What is the R5F10ALELFB#V5?
The R5F10ALELFB#V5 is a Renesas Electronics 16-bit RL78/F13 microcontroller in an LFQFP package. It is designed for compact embedded-control products requiring efficient firmware execution, low-power operation, and integrated communications. The RL78/F13 family includes devices from 20 to 80 pins and provides flash-memory configurations from 16 KB to 128 KB across the family. According to the Renesas RL78/F13 product information, family devices include CAN, LIN, RAM ECC, PLL lock detection, and port-output-state monitoring.
Where can I download the R5F10ALELFB#V5 datasheet PDF?
Use the linked Renesas Electronics product page for the official RL78/F13 documentation and ordering information. The manufacturer page for the closely identified R5F10ALELFB#X5 variant is the official source available for the R5F10ALELFB naming family. Engineers should verify the V5 suffix against the ordering-information table before using a document for production release. The datasheet remains the controlling reference for pin names, electrical limits, clock settings, peripheral availability, flash size, and programming requirements.
Where can I find the R5F10ALELFB#V5 pinout?
The R5F10ALELFB#V5 pin assignment must be read from the pin-description table in the applicable Renesas Electronics datasheet. The part is listed in an LFQFP package, but the exact pin count and suffix-specific terminal arrangement are not established by the available product snippets. Do not derive PCB connections from a generic RL78/F13 drawing without checking the ordering table. Confirm pin 1 orientation, supply terminals, reset behavior, debug signals, port functions, and all package-pin identifiers against the manufacturer document.
What are the key specifications of R5F10ALELFB#V5 that engineers should know?
The R5F10ALELFB#V5 is a 16-bit Renesas RL78/F13 microcontroller in an LFQFP package. The broader RL78/F13 family covers 20- to 80-pin devices with 16 KB to 128 KB flash configurations and includes CAN and LIN communication peripherals. It also provides RAM ECC, PLL lock detection, and port-output-state monitoring for control and diagnostic systems. Exact memory size, clock rate, voltage range, temperature range, and peripheral availability must be confirmed for the specific V5 ordering code in the manufacturer datasheet.
Is R5F10ALELFB#V5 suitable for automotive and industrial control systems?
The R5F10ALELFB#V5 is suitable when the design needs a low-power 16-bit controller and the required RL78/F13 communication or safety features. The family includes CAN and LIN interfaces, RAM ECC, PLL lock detection, and port-output-state monitoring. However, automotive deployment requires confirmation of the exact V5 suffix qualification, operating-temperature limits, and AEC-Q100 status from Renesas Electronics. Those conditions must be met before using the device in a safety-relevant or vehicle-network application.
What can replace the R5F10ALELFB#V5?
A replacement for the R5F10ALELFB#V5 must match its LFQFP footprint, pin arrangement, electrical limits, memory configuration, clock behavior, peripheral set, and firmware assumptions. No separate manufacturer has a confirmed pin-to-pin equivalent for this exact ordering code, and a generic 16-bit MCU is not a drop-in replacement. Before changing devices, compare the manufacturer pin tables, memory map, interrupt vectors, peripheral registers, startup behavior, and programming interface. An unverified equivalent can require PCB changes and substantial firmware rework.
Is there a drop-in replacement for R5F10ALELFB#V5?
No confirmed drop-in replacement for the R5F10ALELFB#V5 has been established. A valid replacement requires the same package footprint and pin numbering, comparable flash and RAM resources, compatible peripherals and interrupts, and an electrically equivalent power and clock configuration. The identified R5F10ALELFB#X5 family member requires suffix-specific review and is not treated as a drop-in alternative without confirmation from the Renesas ordering information. Use the Request a Quote form on this page to request availability and documented replacement options.
What is the best cross-brand equivalent for R5F10ALELFB#V5?
No cross-brand pin-compatible equivalent for the R5F10ALELFB#V5 can be recommended without verified package, pin, memory, and peripheral data. The RL78/F13 family combines a 16-bit core with communication and safety-oriented functions, so a superficially similar low-power MCU may still differ in pin mapping, interrupt architecture, memory organization, and tooling. A genuine replacement needs an engineering comparison of the package, power rails, clock tree, peripheral mapping, bootloader behavior, and development-tool compatibility before it can be called drop-in compatible.
When should I choose the R5F10ALELFB#V5 instead of another low-power MCU?
Choose the R5F10ALELFB#V5 when the product benefits from the established Renesas RL78/F13 ecosystem, low-power 16-bit control, and the family's CAN, LIN, RAM ECC, PLL lock detection, and port-state monitoring features. It is particularly attractive for compact controllers that need deterministic embedded behavior rather than application-processor performance. Select another MCU only when its package, memory, peripheral set, development tools, lifecycle plan, and qualification requirements align more closely with the product specification.
Is R5F10ALELFB#V5 suitable for motor control and appliance control?
The R5F10ALELFB#V5 is suitable for low-power motor or appliance control when its exact timers, analog interfaces, and I/O resources match the design. The RL78/F13 family supports a 16-bit embedded-control architecture and integrated CAN or LIN communications for connected equipment. Real-time control also requires validation of timer resolution, PWM channels, comparator resources, interrupt latency, and clock settings in the exact V5 datasheet. Prototype the power stage and thermal design separately from the MCU firmware.
R5F10ALELFB#V5 vs R5F10ALELFB#X5 - which variant should be selected?
The R5F10ALELFB#V5 and R5F10ALELFB#X5 belong to the same Renesas RL78/F13 naming family, but their suffix codes must be resolved from the ordering-information table before either is declared interchangeable. The shared family description does not prove identical temperature grade, package configuration, shipment form, or lifecycle treatment. Compare the complete ordering code and every suffix field on the manufacturer page. If the listed electrical and physical fields match exactly, the selected variant can preserve the existing design intent.
How do I choose between R5F10ALELFB#V5 and a site-listed automotive MCU?
Choose the R5F10ALELFB#V5 when the design specifically requires the RL78/F13 feature set, including its 16-bit control architecture and family-level CAN, LIN, RAM ECC, PLL lock detection, and port monitoring. Select an automotive MCU instead when its exact qualification, temperature grade, communications coverage, safety mechanisms, lifecycle commitment, and tooling provide a better fit for a vehicle program. Package similarity alone is not enough: memory size, peripheral assignment, pin mapping, and software ecosystem must also satisfy the system requirements.
Where can I buy R5F10ALELFB#V5 online?
Use the Request a Quote form on this page to request R5F10ALELFB#V5 availability, current commercial terms, lot traceability, and lead time. The manufacturer identity, exact MPN, and LFQFP package should be included in the request so the quotation corresponds to the intended ordering code. Buyers should also request the applicable Renesas Electronics datasheet and any lifecycle or change-notification documentation needed for production qualification. Stock and delivery schedules can change, so obtain written confirmation before committing the design.
What is the price of R5F10ALELFB#V5?
The current commercial price for the R5F10ALELFB#V5 should be requested through the Request a Quote form on this page. The request should specify the required quantity, package configuration, acceptable ship date, and whether unopened factory packing or traceability is needed. Because embedded-microcontroller pricing can vary with quantity, inventory, date code, and contractual terms, a fixed figure without current quotation support can become inaccurate. The same form can provide lead-time and minimum-order information for production planning.
What is the lead time and stock status for R5F10ALELFB#V5?
Request the current lead time and stock position for the R5F10ALELFB#V5 using the Request a Quote form on this page. Include your required quantity, target delivery date, approved sourcing status, and traceability requirements in the request. A manufacturer or authorized-channel response should identify the exact suffix and package being allocated. Engineers should allow time for lifecycle review, incoming inspection, and any required automotive or industrial qualification before treating the component as production-ready.
Does the R5F10ALELFB#V5 support automotive communication interfaces?
The RL78/F13 family includes built-in CAN and LIN modules for automotive-style communication tasks. Those interfaces support CAN-based multi-node networking and lower-cost LIN links to sensors and actuators in compact vehicle and appliance systems. The exact CAN channel count, LIN channel count, electrical standard, operating range, and qualification status for the R5F10ALELFB#V5 must be confirmed in the ordering information and datasheet. Transceiver selection and external protection remain separate board-level requirements.

Technische Referenzdaten für R5F10ALELFB#V5 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the R5F10ALELFB#V5 when a compact product benefits from the Renesas RL78/F13 16-bit embedded-control platform, low-power operation, and integrated CAN or LIN communication. It is especially relevant to appliance controllers, industrial sensing modules, motor-control peripherals, and connected equipment that need diagnostic functions such as RAM ECC, PLL lock detection, and port-output-state monitoring. Review the R5F10ALELFB#X5 ordering variant when its suffix offers a more appropriate grade or configuration, but do not interchange suffix codes without checking the ordering table. No cross-brand drop-in alternative is confirmed. A different low-power MCU is reasonable only when it provides the required package, memory, timers, analog channels, communications, qualification, and software-tool support, even if its CPU performance appears similar.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package LFQFP
Brand Renesas Electronics
CPU Architecture 16-bit RL78/F13
Product Family RL78/F13
Family Flash-Memory Range 16 KB to 128 KB
Family Pin-Count Range 20 to 80 pins
CAN Interface Built into the RL78/F13 family
LIN Interface Built into the RL78/F13 family
Memory Protection RAM ECC supported by the RL78/F13 family
Clock Monitoring PLL lock function supported by the RL78/F13 family
Port Diagnostics Port output state monitoring supported by the RL78/F13 family

Wichtigste Unterscheidungsmerkmale

  • Purpose-built 16-bit embedded-control architecture (vs. R5F10ALELFB#X5)
  • Integrated vehicle-oriented communication options (vs. R5F10ALELFB#X5)
  • Diagnostics-oriented family features (vs. R5F10ALELFB#X5)

Designhinweise

Assign the layout from the exact R5F10ALELFB#V5 pin-description table rather than a generic RL78/F13 drawing. Place every supply decoupling capacitor directly beside its associated package pin, keep the ground-return path short, and reserve adequate copper for the LFQFP footprint. Confirm pin 1 orientation against the manufacturer land pattern. Since the exact pin count and terminal map have not been established for this ordering suffix, do not release Gerber artwork, a PCB drill file, or a connector assignment until those details are verified.

Validate the complete power tree at the MCU pins rather than only at the supply source. Check startup current, operating current, injected current, and internal voltage limits for the exact V5 suffix, then account for transients caused by switching loads, communication transceivers, and external pull networks. Use local bulk and high-frequency decoupling to isolate the digital supply. The RL78/F13 family's low-consumption characteristics do not remove the need to analyze dynamic supply excursions and grounding in a complete embedded-control board.

Separate sensitive measurement paths from high-current switching stages and keep clock, reset, and programming lines away from noisy power-converter nodes. CAN and LIN traces must follow the applicable interface-impedance and routing rules, with protection devices placed close to the connector or external transceiver where applicable. Provide a clean ground reference for analog and communication sections. Any safety or diagnostic claim based on RAM ECC, PLL lock detection, or port-output-state monitoring also depends on correct firmware initialization and fault-response logic.

Do not treat the R5F10ALELFB#X5 and R5F10ALELFB#V5 ordering codes as interchangeable without checking every suffix field. Also avoid choosing a generic low-power MCU solely by package size: memory size, peripheral mapping, interrupt behavior, clock architecture, and development-tool support can differ even when the lead count appears similar. Before schematic or firmware release, create a requirements table covering electrical limits, timers, analog channels, communications, memory, temperature, qualification, and programming functions, then map each requirement to the exact manufacturer ordering code.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact V5 suffix qualification and compliance declarations must be confirmed in the Renesas ordering information and product documentation before production use.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

R5F10ALELFB#V5 datasheet R5F10ALELFB#V5 pinout R5F10ALELFB#V5 datasheet pdf R5F10ALELFB#V5 equivalent R5F10ALELFB#V5 replacement R5F10ALELFB#V5 price R5F10ALELFB#V5 stock Renesas R5F10ALELFB#V5 R5F10ALELFB#V5 schematic R5F10ALELFB#V5 footprint R5F10ALELFB#V5 vs R5F10ALELFB#X5 R5F10ALELFB#V5 application circuit

Verwandte Bauteile & Begriffe

Renesas Electronics R5F10ALELFB#V5 R5F10ALELFB#X5 R5F10DLELFB RL78/F13 microcontroller MCU 16-bit microcontroller embedded controller semiconductor LFQFP CAN interface LIN interface RAM ECC PLL lock detection port output state monitoring flash memory low-power control automotive electronics industrial control Renesas Electronics Corporation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen