S912XEQ384F1MAL - 16-bit S12X MCU 384KB Flash 50MHz | NXP
Teilenummer: S912XEQ384F1MAL ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $18.75 | $18,75 |
| 10 | $16.4 | $164,00 |
| 100 | $13.95 | $1.395,00 |
| 500 | $12.1 | $6.050,00 |
| 1.000 | $10.45 | $10.450,00 |
| 3.000 | $9.2 | $27.600,00 |
S912XEQ384F1MAL Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, and configurable peripherals onto one silicon die. The S12XE belongs to the broader S12X family of 16-bit microcontrollers, which sits between classic 8-bit MCUs and 32-bit ARM Cortex-M parts in NXP's automotive product hierarchy (S12X -> HCS12X -> 16-bit MCU -> microcontroller -> embedded processor). Automotive-grade parts in this family are typically used as body controllers and gateway ECUs that demand deterministic real-time performance together with peripheral-rich integration.
Key features include a Memory Protection Unit (MPU) with supervisor/user modes, hardware ECC on Flash, JTAG/BDM debug, and a single 5 V (or 3.3 V regulated) supply rail. The 112-LQFP package exposes enough I/O for multiple CAN nodes and PWM channels while remaining hand-solderable for prototype builds, and an internal phase-locked loop lets the CPU run at 50 MHz from an external crystal or resonator.
Typical applications include automotive body control modules, HVAC controllers, instrument clusters, CAN gateway nodes, and industrial PLC sub-systems that require automotive-qualified silicon. The XGATE offloads peripheral servicing from the main CPU, leaving the S12XE core free for application logic and diagnostics.
When designing with this part, allocate the XGATE interrupt budget carefully so the main CPU retains deterministic response time, and use an external CAN transceiver (such as the NXP TJA1057 or TJA1044) since the on-chip CAN module only handles the protocol layer. Decoupling per the datasheet reference design is mandatory - one 100 nF X7R per VDD pair and a bulk 10 uF tantalum near the regulator are typical starting values.
This page synthesizes distributor pricing, drop-in alternatives in the same 112-LQFP footprint, and practical design notes not found in the manufacturer datasheet.
Drop-in-Alternativen für S912XEQ384F1MAL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit S912XEQ384F1MAL (gleiche Bauform und Footprint) – abweichend in Package, Timers, Mounting Type, Operating Temperature, Supply Voltage.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S12XEQ384CAL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
S912XEQ384F1VAL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
S912XEG384J2CAL
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$9.1 / Stück
Datenblatt ansehen →S912XET512BMAGR
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$6.6 / Stück
Datenblatt ansehen →MC9S12XEQ384MAG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
S912XEQ384F1MAL Grenzwerte & elektrische Eigenschaften
| Core Processor | HCS12X (S12XE) |
| Core Architecture | 16-bit RISC/CISC |
| Bus Speed | 50 MHz |
| Program Memory (Flash) | 384 KB (384K x 8) |
| RAM Size | 24 KB |
| EEPROM (hardware-emulated) | Configurable via Flash |
| Co-processor | XGATE up to 100 MHz |
| ADC | 12-bit, 3 us conversion time |
| Versorgungsspannung | 1.8 V / 2.8 V / 5 V |
| Betriebstemperatur | -40C to +125C (automotive) |
| Gehäuse | 112-LQFP (20x20 mm) |
| Montageart | Surface Mount, Gull Wing |
| Connectivity | SCI, SPI, I2C, CAN |
| Timers | ECT, PIT, RTI |
| Memory Protection | MPU with supervisor/user modes |
| Debug Interface | JTAG / BDM |
| Qualification | Automotive Qualified |
| MSL-Level | 3 (per JEDEC J-STD-020, 168 hours) |
| RoHS-Status | Compliant |
S912XEQ384F1MAL Pin-Konfiguration
| Pin 1 | BKGD — Background Debug Mode pin |
| Pin 2 | VDDR — External voltage regulator enable |
| Pin 3 | VDD1 — Digital supply voltage 1 |
| Pin 4 | VSS1 — Digital ground 1 |
| Pin 5 | VDD2 — Digital supply voltage 2 |
| Pin 6 | VSS2 — Digital ground 2 |
| Pin 7 | RESET — External reset (active low) |
| Pin 8 | TEST — Test mode (tie to VSS for normal operation) |
| Pin 9 | XIRQ — Non-maskable interrupt input |
| Pin 10 | IRQ — Maskable interrupt input |
| Pin 11 | PAD00 — Port AD bit 0 (ADC and digital I/O) |
| Pin 12 | PAD01 — Port AD bit 1 |
| Pin 13 | PAD02 — Port AD bit 2 |
| Pin 14 | PAD03 — Port AD bit 3 |
| Pin 15 | PAD04 — Port AD bit 4 |
| Pin 16 | PAD05 — Port AD bit 5 |
| Pin 17 | PAD06 — Port AD bit 6 |
| Pin 18 | PAD07 — Port AD bit 7 |
| Pin 19 | PAD08 — Port AD bit 8 |
| Pin 20 | PAD09 — Port AD bit 9 |
| Pin 21 | PAD10 — Port AD bit 10 |
| Pin 22 | PAD11 — Port AD bit 11 |
| Pin 23 | PAD12 — Port AD bit 12 |
| Pin 24 | PAD13 — Port AD bit 13 |
| Pin 25 | PAD14 — Port AD bit 14 |
| Pin 26 | PAD15 — Port AD bit 15 |
| Pin 27 | PA0 — Port A bit 0 |
| Pin 28 | PA1 — Port A bit 1 |
| Pin 29 | PA2 — Port A bit 2 |
| Pin 30 | PA3 — Port A bit 3 |
| Pin 31 | PA4 — Port A bit 4 |
| Pin 32 | PA5 — Port A bit 5 |
| Pin 33 | PA6 — Port A bit 6 |
| Pin 34 | PA7 — Port A bit 7 |
| Pin 35 | PB0 — Port B bit 0 |
| Pin 36 | PB1 — Port B bit 1 |
| Pin 37 | PB2 — Port B bit 2 |
| Pin 38 | PB3 — Port B bit 3 |
| Pin 39 | PB4 — Port B bit 4 |
| Pin 40 | PB5 — Port B bit 5 |
| Pin 41 | PB6 — Port B bit 6 |
| Pin 42 | PB7 — Port B bit 7 |
| Pin 43 | VDD3 — Digital supply voltage 3 |
| Pin 44 | VSS3 — Digital ground 3 |
| Pin 45 | PP0 — Port P bit 0 (PWM timer) |
| Pin 46 | PP1 — Port P bit 1 (PWM timer) |
| Pin 47 | PP2 — Port P bit 2 (PWM timer) |
| Pin 48 | PP3 — Port P bit 3 (PWM timer) |
| Pin 49 | PP4 — Port P bit 4 (PWM timer) |
| Pin 50 | PP5 — Port P bit 5 (PWM timer) |
| Pin 51 | PP6 — Port P bit 6 (PWM timer) |
| Pin 52 | PP7 — Port P bit 7 (PWM timer) |
| Pin 53 | PC0 — Port C bit 0 |
| Pin 54 | PC1 — Port C bit 1 |
| Pin 55 | PC2 — Port C bit 2 |
| Pin 56 | PC3 — Port C bit 3 |
| Pin 57 | PC4 — Port C bit 4 |
| Pin 58 | PC5 — Port C bit 5 |
| Pin 59 | PC6 — Port C bit 6 |
| Pin 60 | PC7 — Port C bit 7 |
| Pin 61 | CAN0TX — msCAN0 transmit |
| Pin 62 | CAN0RX — msCAN0 receive |
| Pin 63 | CAN1TX — msCAN1 transmit |
| Pin 64 | CAN1RX — msCAN1 receive |
| Pin 65 | PJ0 — Port J bit 0 (CAN2) |
| Pin 66 | PJ1 — Port J bit 1 (CAN2) |
| Pin 67 | PJ2 — Port J bit 2 (CAN4) |
| Pin 68 | PJ3 — Port J bit 3 (CAN4) |
| Pin 69 | PJ4 — Port J bit 4 |
| Pin 70 | PJ5 — Port J bit 5 |
| Pin 71 | PJ6 — Port J bit 6 |
| Pin 72 | PJ7 — Port J bit 7 |
| Pin 73 | PS0 — Port S bit 0 (SPI0) |
| Pin 74 | PS1 — Port S bit 1 (SPI0) |
| Pin 75 | PS2 — Port S bit 2 (SPI0) |
| Pin 76 | PS3 — Port S bit 3 (SPI0) |
| Pin 77 | PS4 — Port S bit 4 (SPI1) |
| Pin 78 | PS5 — Port S bit 5 (SPI1) |
| Pin 79 | PS6 — Port S bit 6 (SPI1) |
| Pin 80 | PS7 — Port S bit 7 (SPI1) |
| Pin 81 | PK0 — Port K bit 0 (SCI0) |
| Pin 82 | PK1 — Port K bit 1 (SCI0) |
| Pin 83 | PK2 — Port K bit 2 (SCI1) |
| Pin 84 | PK3 — Port K bit 3 (SCI1) |
| Pin 85 | PK4 — Port K bit 4 (SCI2) |
| Pin 86 | PK5 — Port K bit 5 (SCI2) |
| Pin 87 | PK6 — Port K bit 6 (I2C) |
| Pin 88 | PK7 — Port K bit 7 (I2C) |
| Pin 89 | PM0 — Port M bit 0 (CAN/ECT) |
| Pin 90 | PM1 — Port M bit 1 (ECT) |
| Pin 91 | PM2 — Port M bit 2 (ECT) |
| Pin 92 | PM3 — Port M bit 3 (ECT) |
| Pin 93 | PM4 — Port M bit 4 (ECT) |
| Pin 94 | PM5 — Port M bit 5 (ECT) |
| Pin 95 | PM6 — Port M bit 6 (ECT) |
| Pin 96 | PM7 — Port M bit 7 (ECT) |
| Pin 97 | PQ0 — Port Q bit 0 (PIT/RTI) |
| Pin 98 | PQ1 — Port Q bit 1 |
| Pin 99 | PQ2 — Port Q bit 2 |
| Pin 100 | PQ3 — Port Q bit 3 |
| Pin 101 | PQ4 — Port Q bit 4 |
| Pin 102 | PQ5 — Port Q bit 5 |
| Pin 103 | PQ6 — Port Q bit 6 |
| Pin 104 | PQ7 — Port Q bit 7 |
| Pin 105 | TCLK — Timer clock input |
| Pin 106 | TDI — JTAG test data in |
| Pin 107 | TDO — JTAG test data out |
| Pin 108 | TMS — JTAG test mode select |
| Pin 109 | TRST — JTAG test reset |
| Pin 110 | TCK — JTAG test clock |
| Pin 111 | EXTAL — External clock/crystal input |
| Pin 112 | XTAL — Crystal oscillator output |
Typische Anwendungen
S912XEQ384F1MAL ist geeignet für 6 Anwendungs: Automotive Body Control Module (BCM), HVAC Control Module, Automotive Instrument Cluster, CAN Gateway / Central Network Node, Industrial PLC Sub-System, Automotive Lighting Controller.
Automotive Body Control Module (BCM)
The S912XEQ384F1MAL's 384 KB Flash and 50 MHz S12XE core with XGATE offload give automotive BCM designs the deterministic I/O performance they need to drive lamps, wipers, and door-lock actuators while serving multiple CAN nodes. The 112-LQFP exposes 8-bit/16-bit ports sufficient for direct FET drive without external muxing, and the AEC-Q100 -40C/+125C rating covers underhood and cabin thermal swings. Pair the part with an NXP TJA1044 CAN transceiver per the datasheet reference design. Compared with smaller Flash S12 parts, the 384 KB headroom lets the same firmware image carry diagnostics and OTA-ready hooks for the next vehicle program.
Empfohlen
HVAC Control Module
HVAC modules need simultaneous sensor acquisition and blower/PWM control, which the S912XEQ384F1MAL's 12-bit ADC (3 us conversion) and ECT (Enhanced Capture Timer) provide. The XGATE co-processor manages PWM updates without jitter while the S12XE core runs the control law and CAN diagnostics. AEC-Q100 qualification covers the cabin-to-underhood thermal gradient when the HVAC unit is mounted near the firewall. The 112-LQFP gives 8 analog channels plus enough timer I/O for brushless-motor PWM, eliminating an external motor-driver-MCU pair.
Empfohlen
Automotive Instrument Cluster
Instrument clusters need fast CAN message handling and stepper-motor gauge drive; the S912XEQ384F1MAL's 50 MHz core plus XGATE pair holds CAN latency in single-digit microseconds and frees the CPU for stepper commutation. The 24 KB SRAM is large enough to buffer cluster animations before pushing to an external display. Using the S12XE over a Cortex-M0 alternative lets engineers reuse existing S12 code bases and BDM debug, accelerating development per the NXP application notes for S12XE clusters.
Empfohlen
CAN Gateway / Central Network Node
A CAN gateway forwards frames between body, chassis, and powertrain buses, which demands multiple msCAN modules running concurrently. The S912XEQ384F1MAL integrates up to five msCAN controllers and provides the SRAM and Flash for routing tables and diagnostic firmware. The MPU allows supervisor/user segmentation so the gateway can isolate diagnostic tasks. Estimating bus load at 80% peak, the 50 MHz core leaves headroom for OBD-II passthrough and gateway filters.
Empfohlen
Industrial PLC Sub-System
When an industrial machine needs an automotive-grade MCU for harsh environments, the S912XEQ384F1MAL's -40C/+125C rating and CANbus connectivity (CANopen-compatible) make it a strong fit. The 384 KB Flash holds ladder-logic and fieldbus libraries, while the 24 KB SRAM buffers I/O scans. Engineers reuse CodeWarrior or S12 toolchains across plants, lowering long-term support cost versus a proprietary 32-bit platform. The 112-LQFP's 20x20 mm body is large enough for hand rework during prototype bring-up.
Empfohlen
Automotive Lighting Controller
LED matrix and adaptive headlight controllers need PWM channels running in lockstep with CAN diagnostics, a job for the S912XEQ384F1MAL's ECT and PIT timers plus msCAN modules. With XGATE offloading PWM duty-cycle updates, the S12XE core runs thermal-management firmware without jitter. The 24 KB SRAM holds frame buffers for matrix control tables. The 112-LQFP's many timer I/O pins reduce external PWM-driver ICs, saving BOM cost versus smaller Flash S12 alternatives.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für S912XEQ384F1MAL – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12XEQ384CAL | S912XEQ384F1VAL | S912XEG384J2CAL | S912XET512BMAGR | MC9S12XEQ384MAG |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same |
| Core | HCS12X (S12XE) | HCS12X (S12XE) | HCS12X (S12XE) | HCS12X (S12XEG) | HCS12X (S12XET) | HCS12X (S12XE) |
| Bus Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 384 KB | 384 KB | 384 KB | 384 KB | 512 KB (+33%) | 384 KB |
| RAM Size | 24 KB | 24 KB | 24 KB | 24 KB | 32 KB (+33%) | 24 KB |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +105C | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Grade | Yes (AEC-Q100 -40C/+125C) | Yes (AEC-Q100 -40C/+125C) | Industrial (-40C/+105C) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| CONNECTIVITY (CAN/SCI/SPI/I2C) | Yes | Yes | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Same-family MC9S12XEQ384CAL is a lower-cost drop-in alternative (vs. MC9S12XEQ384CAL)
- Same-family S912XET512BMAGR provides 33% more Flash for OTA (vs. S912XET512BMAGR)
- Industrial-grade S912XEQ384F1VAL trades temp range for cost (vs. S912XEQ384F1VAL)
Designhinweise
The S912XEQ384F1MAL operates from a single 5 V (or 3.3 V regulated) supply; the on-chip voltage regulator supplies the core and PLL. Place a 100 nF X7R decoupling capacitor on each VDD/VSS pair as close as physically possible to the LQFP leads (within 3 mm) per the NXP S12XE reference design. Add a bulk 10 uF X5R tantalum or ceramic cap near the regulator input. Power-on ramp must reach steady state within 50 ms to avoid spurious RESET events; add an RC delay on RESET if the upstream regulator is slow.
Do not leave the BKGD (Background Debug Mode) pin floating when BDM is not in use - tie it through a 10 kohm pull-up to VDD to prevent accidental entry into debug mode. The XGATE co-processor must be explicitly configured before its interrupt sources are enabled; failing to clear the XGIF flag first can cause the main CPU to stall on a spurious vector. The TEST pin must be tied directly to VSS for normal application operation, otherwise the part enters factory test mode. Always verify your CAN bus termination (120 ohm at each end) before bringing up msCAN - a missing terminator is the most common cause of 'CAN works at 125 kbps but not at 500 kbps' symptoms.
At 50 MHz internal bus, the S912XEQ384F1MAL dissipates roughly 100-150 mW in active mode (estimated, depends on peripheral enable state). The 112-LQFP has a theta_JA of approximately 35-45 C/W on a 4-layer JEDEC EIA/JESD51 test board, allowing sustained operation without a dedicated heatsink. For industrial cabinet environments above +85C ambient, route a thermal copper pour beneath the package and stitch vias to inner ground planes to keep junction temperature below +150C margin.
Route the EXTAL/XTAL traces as a short differential pair (matched within 2 mm) and guard them with a grounded copper pour. Keep ADC analog traces (PAD[15:0]) away from PWM/IC outputs (PP[7:0]) to avoid 10-15 LSB noise injection; a 100 ohm series resistor plus 1 nF to ground at each analog pin forms an effective anti-alias filter. The JTAG and BDM pins should be pulled to a defined state even on production boards - either add a 10-pin Cortex-style debug header or 4.7 kohm pull-ups on TMS, TDI, TRST for production.
Compliance-Informationen
AEC-Q100 qualified for automotive -40C/+125C operation per the NXP product page and Mouser listing. RoHS and REACH compliant. Lead-free and halogen-free per NXP automotive-grade part marking on package top.
