STM32L071C8T6 - 32MHz Cortex-M0+ 64KB Ultra-Low-Power MCU | STMicroelectronics
Teilenummer: STM32L071C8T6 ✓ AktivSTM32L071C8T6 Übersicht
An ultra-low-power microcontroller (MCU) is a semiconductor that minimizes its own energy use so that a battery-operated product can run for months or years on a single cell. The STM32L0 access line from STMicroelectronics pairs a 32-bit Arm Cortex-M0+ core - the smallest and most energy-efficient member of the Arm Cortex-M family - with power-saving features such as low-power run and stop modes. In the wider hierarchy, this device sits as an embedded microcontroller inside the broader category of semiconductor components, used where deterministic real-time control and low standby current matter more than raw processing throughput.
Key features of the STM32L071C8T6 include a 32 MHz maximum clock, 64 KB of embedded Flash for firmware storage, 20 KB of SRAM for working memory, and operation from a 2.5 V / 3.3 V supply. It belongs to STMicroelectronics' access line of STM32L0 devices, which targets cost-sensitive, low-power designs, and it is offered in a 48-LQFP package that is widely supported by standard PCB assembly and hand-soldering processes.
Architecturally, the Cortex-M0+ core uses a Thumb-2 instruction set with an integrated Nested Vector Interrupt Controller for fast, low-latency interrupt handling, while the surrounding peripherals are engineered for low-power operation. Because the core and peripheral set are shared across the STM32L0 family, application code written for one STM32L0 member can often be migrated to another family member with minimal driver changes, which greatly reduces firmware maintenance effort across product variants.
Typical applications include battery-operated sensor nodes and IoT endpoint devices, smart meters, industrial monitoring and control modules, low-power wireless sensor nodes, compact consumer accessories, and always-on battery-powered wearables where sleep-mode current dominates the total energy budget.
When designing with this device, plan the decoupling network and clock source carefully: place the bulk and high-frequency bypass capacitors directly at the supply pins, keep the 32 MHz oscillator loop short on the PCB, and confirm that the regulator can support the required peak current when the core wakes from stop mode. The 48-LQFP footprint also makes the part easy to hand-probe and to route with 0.5 mm pitch fanout patterns.
This page combines distributor channel listings, verified package and memory specifications, drop-in replacement analysis for the same 48-LQFP footprint, and practical design notes - information that is not consolidated in a single manufacturer datasheet.
Drop-in-Alternativen für STM32L071C8T6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32L071C8T6 (gleiche Bauform und Footprint) – abweichend in SRAM, Communication Interfaces, Flash Memory, Package, Core.
STM32L051C8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✗ Nicht auf Lager
$0.9773 / Stück
Datenblatt ansehen →STM32L151C8T6
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →STM32F072C8T6
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →STM32F030C6T6
✅ Drop-In✗ Nicht auf Lager
$1.15 / Stück
Datenblatt ansehen →STM32G071C8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →GD32F103C8T6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
STM32L071C8T6 Grenzwerte & elektrische Eigenschaften
| Core Processor | Arm Cortex-M0+ (32-bit RISC) |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 20 KB |
| Gehäuse | 48-LQFP (7 x 7 mm) |
| Versorgungsspannung | 2.5 V / 3.3 V |
| Product Line | STM32L0 access line (ultra-low-power) |
| Bit Width | 32-bit |
| Montageart | Surface Mount |
| Delivery Format | Tray |
| Manufacturer | STMicroelectronics |
| Lebenszyklusstatus | Active |
STM32L071C8T6 48-lqfp (7 x 7 mm) Pinbelegungsleitfaden
Pinbelegung für STM32L071C8T6 (48-lqfp (7 x 7 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32L071C8T6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32L071C8T6 ist geeignet für 6 Anwendungs: Battery-Powered IoT Sensor Nodes, Smart Metering and Utility Sensing, Industrial Monitoring and Control Modules, Low-Power Wireless Sensor Nodes, Consumer Accessories and Wearable Devices, HMI Panel Backplane and Display Control.
Battery-Powered IoT Sensor Nodes
The STM32L071C8T6 fits battery-powered IoT sensor nodes because it belongs to STMicroelectronics' ultra-low-power access line and runs an Arm Cortex-M0+ core at up to 32 MHz, which is ample duty-cycled processing for conditioning sensor readings and driving a short radio transmission. With 64 KB of Flash for the protocol stack and 20 KB of SRAM for buffering, the node can hold its firmware, calibration tables and a time-series buffer entirely on-chip, avoiding an external memory component and the associated standby current. In a 3.3 V rail design, the 48-LQFP footprint keeps the board small enough for a coin-cell or thin lithium cell enclosure, and the LQFP-48 land pattern is straightforward to route on a two-layer board.
Empfohlen
Smart Metering and Utility Sensing
Utility metering designs need long standby life, accurate low-speed measurement handling and a cost-sensitive controller that survives years in the field. The STM32L071C8T6 answers this with 64 KB (64K x 8) Flash for the metering algorithm, 20 KB of SRAM for accumulation buffers, and a 32 MHz Arm Cortex-M0+ core that handles protocol formatting and tamper-detection logic in real time. Operating from a 2.5 V / 3.3 V class supply lets the designer power it from the same regulated node that feeds the metering front end, and the 48-LQFP package provides enough pins for pulse-count inputs, LCD or LED drivers, and an RS-485 or wireless transceiver interface without adding a second controller.
Empfohlen
Industrial Monitoring and Control Modules
Industrial monitors and remote control modules must run continuously in noisy environments while keeping the standby power budget low. The STM32L071C8T6 provides a 32 MHz Arm Cortex-M0+ core with 64 KB of Flash for the control application, plus 20 KB of SRAM for logging sensor data between polls. Its low-power STM32L0 access-line architecture lets the module sleep between measurement cycles and wake to service the bus, which directly extends maintenance interval on remote installations. The 48-LQFP (7 x 7 mm) package is a practical choice for industrial PCBs because the 0.5 mm pitch tolerates standard pick-and-place, and it exposes enough pins for digital inputs, sensor interfaces and a communication transceiver.
Empfohlen
Low-Power Wireless Sensor Nodes
A wireless sensor node spends nearly all its life in a low-power state, so the controller's standby behaviour dominates the battery life. The STM32L071C8T6, drawn from the ultra-low-power STM32L0 access line, is engineered for exactly this duty cycle: the Arm Cortex-M0+ core runs at up to 32 MHz when a radio packet must be assembled, and the device drops into low-power modes between transmissions. With 64 KB of Flash, a compact BLE or proprietary-radio stack plus sensor driver can fit in a single device, and 20 KB of SRAM is enough for packet staging and timestamp management. The 48-LQFP outline leaves the board compact and keeps the radio module physically separate from the antenna keep-out area.
Empfohlen
Consumer Accessories and Wearable Devices
Compact consumer accessories and wearables demand a controller that is small, inexpensive and friendly to a coin-cell or rechargeable cell. The STM32L071C8T6 offers 64 KB of Flash for a user-interface state machine and 20 KB of SRAM for gesture or motion buffers, while its ultra-low-power STM32L0 access-line design keeps sleep current low enough to avoid draining small cells between interactions. The 48-LQFP (7 x 7 mm) package is small enough for a slim enclosure yet still hand-solderable for rework, and the 2.5 V / 3.3 V operating class lets the design share a regulator with the rest of the accessory. The same part also fits low-volume maker products that need a mainstream-supported part number rather than a niche device.
Empfohlen
HMI Panel Backplane and Display Control
Small display modules and HMI backplanes need a controller that can refresh indicators and relay keypad events without pulling a high-performance processor into the design. The STM32L071C8T6's 32 MHz Arm Cortex-M0+ core is fast enough for segment or small matrix driving and serial display protocols, and its 64 KB of Flash holds the display driver, keypad scan loop and menu logic, while 20 KB of SRAM covers screen buffering for modest interfaces. Because the STM32L0 access line runs at low power, the display can be refreshed on demand and blanked between user actions to reduce panel power. The 48-LQFP outline exposes enough pins for parallel or serial display lines, backlight control and touch input in a single package.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32L071C8T6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32L051C8T6 | STM32L151C8T6 | STM32F072C8T6 | STM32F030C6T6 | GD32F103C8T6 |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) - same | 48-LQFP (7 x 7 mm) - same | 48-LQFP (7 x 7 mm) - same | 48-LQFP (7 x 7 mm) - same | 48-LQFP (7 x 7 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Core | Arm Cortex-M0+ (32-bit) | Arm Cortex-M0+ (32-bit) | Arm Cortex-M0+ (32-bit) | Arm Cortex-M0+ (32-bit) | Arm Cortex-M0+ (32-bit) | Arm Cortex-M3 (32-bit) |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 108 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB | 64 KB | 32 KB (-50%) | 64 KB |
| Product Line | STM32L0 access line (ultra-low-power) | STM32L0 access line | STM32L1 (with larger memory and peripheral set) | STM32F0 (mainstream Cortex-M0+ with broader peripherals) | STM32F0 value line | GD32F1 (Cortex-M3 general purpose) |
| Peripheral Set / Feature Emphasis | Ultra-low-power access line, 20 KB SRAM | Larger GPIO and peripheral set, same power class | Additional timers, connectivity and larger RAM | Wider analog and connectivity peripherals | Reduced feature set, smallest memory | Cortex-M3 general-purpose peripherals, different register map |
Wichtigste Unterscheidungsmerkmale
- Larger Flash than the same-footprint value-line option (vs. STM32F030C6T6)
- Ultra-low-power access-line positioning with 20 KB SRAM (vs. STM32F072C8T6)
- Same package, more peripherals for feature growth (vs. STM32L151C8T6)
- Mature STM32L0 firmware base versus a Cortex-M3 substitute (vs. GD32F103C8T6)
Designhinweise
Estimated: at a 3.3 V supply with a 2 mA average load and 90 percent duty-cycled sleep, the average current drawn from the rail is roughly 0.2 mA plus the active-phase contribution, so a 220 mAh coin cell gives on the order of a year of service. These are engineering estimates using the stated 3.3 V rail and assumed duty cycle, not datasheet figures. Because the STM32L0 access line is defined by low-power behaviour, budget the sleep-mode current of your firmware configuration from the manufacturer electrical characteristics, and keep the wake source limited to the timers and pins you actually need.
Place the bulk supply capacitor and a 100 nF high-frequency bypass capacitor directly between the VDDA and VSSA pins of the STM32L071C8T6, with the shortest possible traces, and add a 100 nF capacitor at each additional supply pin group. Keep the 32 MHz oscillator loop on the STM32L071C8T6 board as short and compact as possible and away from switching nodes and the LCD or radio transceiver. For the 48-LQFP outline, follow the manufacturer land pattern dimensions rather than a generic library footprint, and confirm pin 1 orientation against the package drawing on the assembly drawing and silkscreen.
Do not assume that any 48-LQFP STM32L0 member is interchangeable: although the STM32L071C8T6, STM32L051C8 and STM32L151C8 share the 48-LQFP footprint, the peripheral mix, clock tree and pin multiplexing differ, so firmware must be re-verified after any substitution. Also remember that the 3.3 V class supply has a defined brown-out window - confirm the rail always stays above the minimum operating voltage during wake-up transients, and separate analog and digital supply pins rather than tying them with a long trace. Finally, enable the low-power mode only after the peripheral clocks and DMA requests are parked, otherwise a mis-configured peripheral can prevent the core from reaching its deepest sleep state.
Compliance-Informationen
The manufacturer product page and distributor listings for the STM32L071C8 access line do not state RoHS, REACH or AEC-Q100 status on the pages captured, so each field is left unknown rather than assumed. The STM32L0 access line is an industrial and commercial temperature grade rather than an automotive-qualified part, so AEC-Q100 does not apply. Confirm RoHS and REACH declarations against the current manufacturer product page or the Declaration of Conformity for the exact ordering code before production release.