Microchip Technology

SY89533LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip

Teilenummer: SY89533LHC ✓ Aktiv
3.3 V Vdss 64-pin TQFP Package 33 MHz to 500 MHz Speed
MOQ: 1 |

SY89533LHC Übersicht

The Microchip SY89533LHC is a 3.3 V precision programmable bus clock synthesizer covering an output-frequency range of 33 MHz to 500 MHz. It integrates a frequency synthesizer with clock fanout buffers and supports LVPECL and LVDS clock outputs. The device is packaged in a 64-pin TQFP package, providing a high-density option for communications, networking, and test systems that require multiple low-jitter clock outputs.

A programmable clock synthesizer belongs to the clock and timing IC hierarchy, where it combines frequency generation, distribution, and logic-level translation in one device. Unlike a crystal oscillator that produces a fixed frequency, the SY89533LHC allows a system clock to be selected through programming. Its LVPECL and LVDS outputs support high-speed differential clocking environments where edge quality, skew control, and deterministic fanout are important.

The principal operating characteristics are the 3.3 V supply, programmable 33 MHz-to-500 MHz frequency capability, and support for both LVPECL and LVDS differential outputs. Integrating the synthesizer and fanout buffers in one package reduces the number of discrete timing components required for multi-output clock trees. The integrated approach also minimizes additive jitter and part-to-part skew compared with a discrete implementation, improving system-level timing consistency while reducing board space and power-management complexity.

SY89533LHC belongs to the Micrel SY89532L and SY89533L precision-edge bus clock family. The related SY89532L device covers the same 33 MHz-to-500 MHz class of programmable operation but has a different output configuration. Device selection therefore requires review of the number and type of outputs, supported logic levels, programming interface, and application-specific timing requirements before substitution.

Typical uses include processor and interface clock trees, high-speed serial links, optical-network equipment, communications infrastructure, instrumentation, and FPGA or ASIC clock distribution. In these systems, the device can generate a common programmable clock and distribute it to multiple differential receivers while maintaining one controlled frequency plan.

The primary design consideration is maintaining a clean, low-noise supply and a controlled impedance environment for every differential output. Keep input and output return paths short, provide solid ground-plane continuity, and follow the manufacturer's recommended termination and decoupling arrangements. Confirm output amplitude, common-mode voltage, fanout limits, and pin-level programming requirements against the applicable device documentation before layout release.

This product summary connects the SY89533LHC's programmable frequency range and differential-output capabilities with package, application, and substitution guidance. It also provides practical implementation notes for engineers designing precision clock trees, while clearly separating documented characteristics from parameters that require confirmation from the manufacturer datasheet.

Drop-in-Alternativen für SY89533LHC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SY89533LHC (gleiche Bauform und Footprint) – abweichend in Mounting Type, Package.

Microchip Technology
Mounting Type: SMD (SMT)
Package: 64-EP-TQFP
Vergleichen mit SY89533LHC →

SY89532LHC

✅ Drop-In
Microchip Technology
📦 64-pin TQFP
Programmable bus-clock synthesizer · 3.3 V · 33 MHz to 500 MHz · LVPECL and LVDS · Crystal input · 1 · SMD (SMT) · 64-EP-TQFP

Preis auf Anfrage

Datenblatt ansehen →

SY89533LHC Technische Daten

Product Type Programmable bus clock synthesizer
Versorgungsspannung 3.3 V
Programmable Output Frequency Range 33 MHz to 500 MHz
Output Logic Levels LVPECL and LVDS
Architecture Integrated synthesizer and fanout buffers
Gehäuse 64-pin TQFP
Montageart Surface mount

SY89533LHC 64-pin tqfp Pinbelegungsleitfaden

Pinbelegung für SY89533LHC (64-pin tqfp-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SY89533LHC im 64-pin tqfp-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY89533LHC.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY89533LHC ist geeignet für 6 Anwendungs: High-Speed Communications Clocking, FPGA and ASIC Clock Distribution, Optical Network Equipment, Industrial Test and Measurement, High-Speed Serial Interface Clock Trees, Servers and Data-Center Networking.

🌐

High-Speed Communications Clocking

The SY89533LHC fits communications equipment requiring a programmable clock from 33 MHz to 500 MHz with differential LVPECL or LVDS signaling. It can generate a common clock and distribute it across a backplane or processor interface clock tree while reducing the component count associated with separate synthesis and fanout stages. The integration of synthesizer and fanout buffers helps limit additive jitter and part-to-part skew. Engineers should confirm output count, reference-clock ratio, termination, and channel assignments in the manufacturer datasheet before finalizing the PCB.

🖥️

FPGA and ASIC Clock Distribution

The SY89533LHC is suitable for FPGA or ASIC designs that need a programmable differential clock source over the 33 MHz-to-500 MHz range. Multiple LVPECL or LVDS outputs can support internal logic, serializers, transceivers, or parallel interfaces, depending on the configured output arrangement. Using one integrated clock synthesizer reduces routing between separate oscillator and fanout devices. Power integrity, reference jitter, output skew, and receiver voltage compatibility should be evaluated for the specific logic family and package.

📡

Optical Network Equipment

Optical networking equipment can use the SY89533LHC to establish a controlled differential clock for high-speed line cards and interface controllers. Its programmable 33 MHz-to-500 MHz range accommodates multiple clock plans, while LVPECL and LVDS outputs support common high-speed backplane conventions. Integrating synthesis and fanout reduces board area and the number of independent clock sources that must be calibrated. Layout must provide continuous ground returns and controlled impedance on every high-speed clock trace.

🏭

Industrial Test and Measurement

The SY89533LHC can serve as a programmable clock source in industrial test equipment, analyzers, and automated measurement systems where accurate signal timing is essential. Its 33 MHz-to-500 MHz range permits clock selection for multiple DUT interface rates, and differential outputs help preserve signal integrity over controlled PCB interconnects. Designers should account for output configuration, reference-clock stability, permissible loading, and jitter requirements when defining the test-platform clock tree.

🔧

High-Speed Serial Interface Clock Trees

The SY89533LHC can provide programmable differential clocking for high-speed serial interfaces operating within the 33 MHz-to-500 MHz range. LVPECL and LVDS outputs suit short, impedance-controlled links commonly used between clock-source, transceiver, and digital-controller devices. Consolidating synthesis and fanout into one package minimizes interstage skew and saves board area. Confirm which outputs are available in each mode and whether the downstream receiver requires LVPECL or LVDS voltage levels.

🖥️

Servers and Data-Center Networking

The SY89533LHC is applicable to server and data-center network interfaces that need a locally generated, programmable clock rather than a fixed-frequency oscillator. Its range from 33 MHz to 500 MHz and differential output support align with high-speed fabric and transceiver clocking requirements. The integrated architecture reduces discrete clock-component count and supports consistent distribution across multiple loads. Designers must validate clock topology, jitter tolerance, power sequencing, and channel-to-channel skew for the target platform.

What is the operating frequency range of the SY89533LHC?
The Microchip SY89533LHC operates from 33 MHz to 500 MHz. This programmable range is identified in the manufacturer documentation for the 3.3 V precision bus clock synthesizer. Use the frequency-multiplier and output-divider calculations in the datasheet when programming a requested output frequency, and confirm that the selected reference clock, divider, and multiplier combination remains within the device's operating limits.
What clock outputs does the SY89533LHC support?
The SY89533LHC supports differential LVPECL and LVDS clock outputs. These high-speed logic standards suit clock trees that require controlled edge rates, common-mode levels, and source-terminated interconnects. The exact number of independently usable outputs and the permitted output-versus-output configurations should be taken from the device pin-description and output tables before assigning channels in a system design.
What is the supply voltage of the SY89533LHC?
The Microchip SY89533LHC operates from a 3.3 V supply. The manufacturer describes the device as a 3.3 V precision programmable bus clock synthesizer. The supply rail must support the device's internal and output current requirements, while decoupling and return paths must be implemented according to the datasheet's recommended layout to preserve clock quality.
Where can I download the SY89533LHC datasheet PDF?
The official SY89532-33L datasheet is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89532-33l.pdf. It covers the related SY89532L and SY89533L precision bus clock family. Use the pin-description table, recommended application circuit, programming sequence, and electrical-characteristics tables when planning the PCB and configuring the device.
Where can I find the SY89533LHC pinout?
The SY89533LHC pinout is shown in the official SY89532-33L manufacturer datasheet and corresponds to the 64-pin TQFP package. Begin with the pin-description table, then cross-check signal directions, power pins, ground pins, and no-connect positions against the package drawing. Do not infer a pin function solely from its position, because programming and output assignments must follow the device-specific table.
What is the best drop-in replacement for the SY89533LHC?
The closest documented drop-in candidate is the Microchip SY89532LHC from the same SY89532-33L family. Both are 3.3 V, 33 MHz-to-500 MHz precision programmable LVPECL and LVDS bus clock synthesizers in the HC package, but their output arrangements differ. Confirm pin functions, programming registers, output counts, and timing limits in the manufacturer datasheet before approving a replacement.
Can the SY89532LHC replace the SY89533LHC?
The SY89532LHC can be a candidate for replacement because it shares the 3.3 V supply, 33 MHz-to-500 MHz operating class, LVPECL and LVDS support, and HC package with the SY89533LHC. It is not automatically interchangeable: the family provides different output configurations, so the engineer must compare pin assignments, output channels, programming requirements, and application timing constraints before substitution.
When should I choose the SY89533LHC instead of the SY89532LHC?
Choose the SY89533LHC when the clock tree requires the output configuration defined for the SY89533L variant. Both devices support programmable operation from 33 MHz to 500 MHz with LVPECL and LVDS outputs, so frequency range alone does not distinguish them. Select by comparing the required number of outputs, available clock sources, output topology, and register-level programming described in the manufacturer datasheet.
Is the SY89533LHC suitable for a 500 MHz communications clock tree?
Yes, the SY89533LHC is designed to cover programmable operation through 500 MHz, making it suitable for high-speed communications clock distribution when its output configuration matches the system. The device provides LVPECL and LVDS outputs and integrates synthesis with fanout. Validate jitter, output amplitude, channel-to-channel skew, reference-clock quality, and termination against the datasheet limits for the final topology.
How does the integrated synthesizer improve clock-tree performance?
The integrated synthesizer reduces the additive jitter and part-to-part skew that can arise when frequency generation and fanout are built from discrete devices. Combining these functions in one 3.3 V device also reduces board area and the number of clock components that require control. The improvement applies when the device is configured and laid out according to the manufacturer's recommended power, grounding, and output practices.
Where can I buy SY89533LHC components online?
Use the Request a Quote form on this page to request current SY89533LHC availability, quantity, and commercial terms. The form connects the request directly to XAIPART without embedding a static price that may become outdated. For production planning, provide the required quantity, target date, and any date-code or inspection requirements when submitting the request.
What is the current price of the SY89533LHC?
The current commercial terms for the SY89533LHC are handled through the Request a Quote form on this page. A static unit price is intentionally not embedded in the technical description because market pricing, quantity, and lead time can change. Submit the required order quantity and delivery schedule to receive current quotation information.
What is the lead time and stock status for the SY89533LHC?
Request current stock and lead-time confirmation through the Request a Quote form on this page. Inventory status depends on package suffix, order quantity, and procurement date, so a generic availability statement would not be reliable. Include your production schedule and required quantity so the sourcing team can confirm the appropriate schedule.
What are the key specifications of the SY89533LHC that engineers should know?
The key SY89533LHC specifications are a 3.3 V supply, programmable operation from 33 MHz to 500 MHz, LVPECL and LVDS differential outputs, an integrated synthesizer with fanout buffers, and a 64-pin TQFP package. According to the manufacturer datasheet, the integration is intended to minimize additive jitter and part-to-part skew. Exact channel count, jitter, power, and timing limits require the electrical-characteristics tables.
Is there a Microchip equivalent for the SY89533LHC?
The Microchip SY89532LHC is the closest same-family equivalent identified for the SY89533LHC because both use the HC package and support 3.3 V operation, programmable 33 MHz-to-500 MHz frequencies, and LVPECL and LVDS outputs. Their output arrangements differ, so equivalence is limited to a candidate drop-in relationship rather than an unconditional substitution. Verify every pin, register, and output assignment before release.

Technische Referenzdaten für SY89533LHC – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY89533LHC when a 3.3 V clock tree requires programmable operation across 33 MHz to 500 MHz and its LVPECL and LVDS output arrangement satisfies the system. The integrated synthesizer and fanout buffers are useful when board area, jitter, and part-to-part skew are priorities. Consider the SY89532LHC as a same-family drop-in candidate when its different output configuration provides the required channels and logic functions in the same 64-pin TQFP footprint. Before substitution, compare the pin table, programming register map, reference requirements, output modes, timing limits, and termination networks. For either variant, verify jitter against the receiver requirement, preserve controlled differential routing, and implement the manufacturer's power-decoupling recommendations. If multiple potential families are being evaluated, perform an interface-level review rather than relying only on frequency range and package dimensions.

Vergleich mit Alternativen

Parameter Dieses Produkt SY89532LHC
Package 64-pin TQFP 64-pin TQFP
Brand Microchip Microchip
Supply Voltage 3.3 V 3.3 V
Programmable Frequency Range 33 MHz to 500 MHz 33 MHz to 500 MHz
Supported Output Logic LVPECL and LVDS LVPECL and LVDS
Architecture Integrated synthesizer and fanout buffers Integrated synthesizer and fanout buffers
Output Arrangement SY89533L family output configuration SY89532L family output configuration

Wichtigste Unterscheidungsmerkmale

  • Family-specific output configuration (vs. SY89532LHC)
  • Single-package synthesis and fanout (vs. SY89532LHC)
  • Programmable differential clock support (vs. SY89532LHC)

Designhinweise

Route all LVPECL and LVDS clock outputs as short, impedance-controlled differential pairs with continuous reference planes and minimal stubs. Keep the clock outputs away from noisy switching nodes and provide an uninterrupted ground return beneath the pairs. Terminate each receiver according to the interface standard and the manufacturer application circuit rather than assuming that every clock channel has identical loading.

Design the 3.3 V rail with low impedance between the supply source and the device. Follow the manufacturer bypass recommendations and place the required capacitors close to the associated power and ground pins, with very short ground connections. Evaluate supply ripple and reference-clock noise in the jitter budget because these sources can degrade an otherwise clean 33 MHz-to-500 MHz output.

Do not treat shared family membership as proof that every device in the SY89532-33L family has identical output assignments. Compare the complete pin-description table, programming registers, supported output modes, reference requirements, and maximum operating frequency before substituting SY89532LHC for SY89533LHC. Verify unused pins and termination requirements as part of the schematic review.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product and datasheet results do not explicitly state the required environmental or material-compliance status. Confirm these attributes with Microchip before qualification.

Ähnliche Suchanfragen

SY89533LHC datasheet SY89533LHC datasheet pdf SY89533LHC pinout SY89533LHC equivalent SY89533LHC replacement SY89533LHC cross reference Microchip SY89533LHC SY89533LHC 500MHz clock synthesizer SY89533LHC LVPECL LVDS SY89533LHC 64 TQFP SY89533LHC vs SY89532LHC SY89533LHC price SY89533LHC stock SY89533LHC application circuit SY89533LHC footprint

Verwandte Bauteile & Begriffe

Microchip Micrel Semiconductor SY89533LHC SY89532LHC programmable clock synthesizer bus clock synthesizer clock and timing IC frequency synthesizer clock fanout buffer LVPECL LVDS differential clock 3.3 V supply 33 MHz to 500 MHz 64-pin TQFP TQFP package family surface mount additive jitter part-to-part skew FPGA clock tree ASIC clock distribution optical networking high-speed communications backplane clocking reference clock
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen