SY89533LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip
MPN: SY89533LHC ✓ सक्रियSY89533LHC अवलोकन
A programmable clock synthesizer belongs to the clock and timing IC hierarchy, where it combines frequency generation, distribution, and logic-level translation in one device. Unlike a crystal oscillator that produces a fixed frequency, the SY89533LHC allows a system clock to be selected through programming. Its LVPECL and LVDS outputs support high-speed differential clocking environments where edge quality, skew control, and deterministic fanout are important.
The principal operating characteristics are the 3.3 V supply, programmable 33 MHz-to-500 MHz frequency capability, and support for both LVPECL and LVDS differential outputs. Integrating the synthesizer and fanout buffers in one package reduces the number of discrete timing components required for multi-output clock trees. The integrated approach also minimizes additive jitter and part-to-part skew compared with a discrete implementation, improving system-level timing consistency while reducing board space and power-management complexity.
SY89533LHC belongs to the Micrel SY89532L and SY89533L precision-edge bus clock family. The related SY89532L device covers the same 33 MHz-to-500 MHz class of programmable operation but has a different output configuration. Device selection therefore requires review of the number and type of outputs, supported logic levels, programming interface, and application-specific timing requirements before substitution.
Typical uses include processor and interface clock trees, high-speed serial links, optical-network equipment, communications infrastructure, instrumentation, and FPGA or ASIC clock distribution. In these systems, the device can generate a common programmable clock and distribute it to multiple differential receivers while maintaining one controlled frequency plan.
The primary design consideration is maintaining a clean, low-noise supply and a controlled impedance environment for every differential output. Keep input and output return paths short, provide solid ground-plane continuity, and follow the manufacturer's recommended termination and decoupling arrangements. Confirm output amplitude, common-mode voltage, fanout limits, and pin-level programming requirements against the applicable device documentation before layout release.
This product summary connects the SY89533LHC's programmable frequency range and differential-output capabilities with package, application, and substitution guidance. It also provides practical implementation notes for engineers designing precision clock trees, while clearly separating documented characteristics from parameters that require confirmation from the manufacturer datasheet.
के लिए ड्रॉप-इन विकल्प SY89533LHC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SY89533LHC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mounting Type, Package.
SY89532LHC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →SY89533LHC विशेषताएं
| Product Type | Programmable bus clock synthesizer |
| सप्लाई वोल्टेज | 3.3 V |
| Programmable Output Frequency Range | 33 MHz to 500 MHz |
| Output Logic Levels | LVPECL and LVDS |
| Architecture | Integrated synthesizer and fanout buffers |
| पैकेज | 64-pin TQFP |
| माउंटिंग प्रकार | Surface mount |
SY89533LHC 64-pin tqfp पिन कॉन्फ़िगरेशन गाइड
SY89533LHC (64-pin tqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY89533LHC.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
SY89533LHC के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Communications Clocking, FPGA and ASIC Clock Distribution, Optical Network Equipment, Industrial Test and Measurement, High-Speed Serial Interface Clock Trees, Servers and Data-Center Networking.
High-Speed Communications Clocking
The SY89533LHC fits communications equipment requiring a programmable clock from 33 MHz to 500 MHz with differential LVPECL or LVDS signaling. It can generate a common clock and distribute it across a backplane or processor interface clock tree while reducing the component count associated with separate synthesis and fanout stages. The integration of synthesizer and fanout buffers helps limit additive jitter and part-to-part skew. Engineers should confirm output count, reference-clock ratio, termination, and channel assignments in the manufacturer datasheet before finalizing the PCB.
FPGA and ASIC Clock Distribution
The SY89533LHC is suitable for FPGA or ASIC designs that need a programmable differential clock source over the 33 MHz-to-500 MHz range. Multiple LVPECL or LVDS outputs can support internal logic, serializers, transceivers, or parallel interfaces, depending on the configured output arrangement. Using one integrated clock synthesizer reduces routing between separate oscillator and fanout devices. Power integrity, reference jitter, output skew, and receiver voltage compatibility should be evaluated for the specific logic family and package.
Optical Network Equipment
Optical networking equipment can use the SY89533LHC to establish a controlled differential clock for high-speed line cards and interface controllers. Its programmable 33 MHz-to-500 MHz range accommodates multiple clock plans, while LVPECL and LVDS outputs support common high-speed backplane conventions. Integrating synthesis and fanout reduces board area and the number of independent clock sources that must be calibrated. Layout must provide continuous ground returns and controlled impedance on every high-speed clock trace.
Industrial Test and Measurement
The SY89533LHC can serve as a programmable clock source in industrial test equipment, analyzers, and automated measurement systems where accurate signal timing is essential. Its 33 MHz-to-500 MHz range permits clock selection for multiple DUT interface rates, and differential outputs help preserve signal integrity over controlled PCB interconnects. Designers should account for output configuration, reference-clock stability, permissible loading, and jitter requirements when defining the test-platform clock tree.
High-Speed Serial Interface Clock Trees
The SY89533LHC can provide programmable differential clocking for high-speed serial interfaces operating within the 33 MHz-to-500 MHz range. LVPECL and LVDS outputs suit short, impedance-controlled links commonly used between clock-source, transceiver, and digital-controller devices. Consolidating synthesis and fanout into one package minimizes interstage skew and saves board area. Confirm which outputs are available in each mode and whether the downstream receiver requires LVPECL or LVDS voltage levels.
Servers and Data-Center Networking
The SY89533LHC is applicable to server and data-center network interfaces that need a locally generated, programmable clock rather than a fixed-frequency oscillator. Its range from 33 MHz to 500 MHz and differential output support align with high-speed fabric and transceiver clocking requirements. The integrated architecture reduces discrete clock-component count and supports consistent distribution across multiple loads. Designers must validate clock topology, jitter tolerance, power sequencing, and channel-to-channel skew for the target platform.
के लिए इंजीनियरिंग संदर्भ डेटा SY89533LHC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | SY89532LHC |
|---|---|---|
| Package | 64-pin TQFP | 64-pin TQFP |
| Brand | Microchip | Microchip |
| Supply Voltage | 3.3 V | 3.3 V |
| Programmable Frequency Range | 33 MHz to 500 MHz | 33 MHz to 500 MHz |
| Supported Output Logic | LVPECL and LVDS | LVPECL and LVDS |
| Architecture | Integrated synthesizer and fanout buffers | Integrated synthesizer and fanout buffers |
| Output Arrangement | SY89533L family output configuration | SY89532L family output configuration |
मुख्य विशेषताएँ
- Family-specific output configuration (बनामSY89532LHC)
- Single-package synthesis and fanout (बनामSY89532LHC)
- Programmable differential clock support (बनामSY89532LHC)
डिज़ाइन नोट्स
Route all LVPECL and LVDS clock outputs as short, impedance-controlled differential pairs with continuous reference planes and minimal stubs. Keep the clock outputs away from noisy switching nodes and provide an uninterrupted ground return beneath the pairs. Terminate each receiver according to the interface standard and the manufacturer application circuit rather than assuming that every clock channel has identical loading.
Design the 3.3 V rail with low impedance between the supply source and the device. Follow the manufacturer bypass recommendations and place the required capacitors close to the associated power and ground pins, with very short ground connections. Evaluate supply ripple and reference-clock noise in the jitter budget because these sources can degrade an otherwise clean 33 MHz-to-500 MHz output.
Do not treat shared family membership as proof that every device in the SY89532-33L family has identical output assignments. Compare the complete pin-description table, programming registers, supported output modes, reference requirements, and maximum operating frequency before substituting SY89532LHC for SY89533LHC. Verify unused pins and termination requirements as part of the schematic review.
अनुपालन जानकारी
The available product and datasheet results do not explicitly state the required environmental or material-compliance status. Confirm these attributes with Microchip before qualification.