TAS5261DKDR - 315W Mono Class D Power Stage | Texas Instruments
Teilenummer: TAS5261DKDR ✗ AbgekündigtTAS5261DKDR Übersicht
A class D power stage is a switching amplifier topology that controls current through the speaker output at high frequency. Compared with a linear audio amplifier, the switching approach reduces the power dissipated in the output devices and enables high output power with smaller magnetic components. In the wider power-management hierarchy, the TAS5261 belongs to the class D amplifier family, which falls under audio amplifier ICs and, more broadly, power management semiconductors.
Key characteristics include 315 W rated mono output power, a single-channel class D architecture, a 36-HSSOP package, and a bridged-load-tie speaker configuration. The HSSOP package uses a gull-wing surface-mount form factor and exposes a thermal pad for heat removal when the device is mounted according to the manufacturer's recommended land pattern. Its operating voltage, output-stage limits, thermal characteristics, and signal-interface timing should be confirmed against the specific version of the manufacturer datasheet before layout release.
Typical implementations include powered speakers, compact home-theater enclosures, soundbars, multimedia speaker systems, subwoofer amplifier modules, and industrial audio products driven by an external audio processor. Because the device is a power stage rather than a complete codec-equipped amplifier, upstream circuitry must supply the required digital audio stream and control signals. A properly designed LC output filter is required to remove high-frequency switching energy before the loudspeaker.
Layout is the dominant design consideration. Place the input, control, power, and output-network connections according to the datasheet reference layout, minimize loop area in high-current switching paths, and provide substantial copper area for thermal dissipation. Verify junction temperature at worst-case supply voltage, output power, and ambient temperature rather than relying on nominal board temperature alone.
This page adds application-focused implementation guidance, pin-compatible sourcing information, and a structured comparison of the documented operating characteristics. Use the manufacturer datasheet and reference layout as the controlling documents for production design, EMC tuning, and thermal validation.
Drop-in-Alternativen für TAS5261DKDR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
TAS5261DKDRG4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TAS5261DKDR Grenzwerte & elektrische Eigenschaften
| Device Type | Mono class D digital amplifier power stage |
| Number of Channels | 1 channel |
| Rated Output Power | 315 W mono |
| Ausgangskonfiguration | Mono bridged-load-tie (BTL) |
| Power Stage Topology | Class D switching amplifier |
| Gehäuse | 36-HSSOP, gull-wing surface mount |
| Number of Terminals | 36 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Montageart | Surface mount |
| Recommended Minimum Load Resistance | 8 ohm |
| Input Signal Type | Single input signal with differential output |
TAS5261DKDR rectangular Pinbelegungsleitfaden
Pinbelegung für TAS5261DKDR (rectangular-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für TAS5261DKDR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TAS5261DKDR ist geeignet für 6 Anwendungs: Powered Subwoofer Module, Compact Home-Theater Speaker, Multimedia Speaker System, Soundbar Subwoofer Amplifier, Professional Active Monitor, Industrial Audio Announcement System.
Powered Subwoofer Module
The TAS5261DKDR fits a high-output subwoofer module because it combines a 315 W mono BTL power stage with a digital audio input architecture. An upstream audio processor can provide the required data and control signals while the power stage drives a low-impedance driver. The main design constraint is thermal: the HSSOP exposed-pad region must be tied to a generous copper area with thermal vias, and continuous output must be checked at the minimum intended supply voltage.
Empfohlen
Compact Home-Theater Speaker
A compact home-theater speaker can use the TAS5261DKDR as a high-efficiency mono power stage for a woofer or full-range driver. The 315 W rating provides substantial headroom for transient audio peaks, while class D switching reduces the heat that must be removed compared with a comparable linear output stage. Use the recommended differential output network and isolate the amplifier from speaker wiring noise with correctly sized and rated inductors.
Empfohlen
Multimedia Speaker System
The TAS5261DKDR is appropriate for multimedia speaker systems that require high power in a small enclosure and accept a digital audio input. Its single-channel BTL architecture suits one driver per module and avoids a conventional series output capacitor in the recommended circuit. The design must include a low-noise digital audio source, correct I2C-style control signaling, an LC filter, and thermal validation under sustained music output.
Empfohlen
Soundbar Subwoofer Amplifier
In a soundbar subwoofer amplifier, the TAS5261DKDR provides a compact way to drive a low-impedance driver from a digital audio bus. The 315 W mono rating supports high short-term audio peaks, but enclosure temperature and acoustic loading strongly affect sustainable output. Place the switching output network and loudspeaker connector in accordance with the reference layout to suppress EMI and maintain predictable acoustic output.
Empfohlen
Professional Active Monitor
An active monitor or studio near-field speaker can use the TAS5261DKDR for a high-output woofer channel. The class D architecture improves conversion efficiency and reduces thermal burden, allowing substantial amplifier output from a relatively compact board. Because large monitor cabinets can retain heat, validate the amplifier at sustained full-power operation with the passive crossover and enclosure loaded rather than at no-load bench conditions.
Empfohlen
Industrial Audio Announcement System
The TAS5261DKDR can drive a high-power announcement or public-address driver in a mono bridged configuration. The 315 W class D power stage suits ruggedized audio equipment where efficiency, output power, and thermal performance are priorities. The system integrator must verify the control interface, configure the manufacturer output filter, and confirm that the loudspeaker and wiring load match the device's documented operating conditions.
Empfohlen
Technische Referenzdaten für TAS5261DKDR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TAS5261DKDRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 36-HSSOP | 36-HSSOP |
| Lifecycle Status | End-of-life | Active |
| Output Power | 315 W mono | 315 W mono |
| Channel Count | 1 channel | 1 channel |
| Amplifier Class | Class D | Class D |
| Output Configuration | Mono BTL differential output | Mono BTL differential output |
| Terminal Count | 36 | 36 |
Wichtigste Unterscheidungsmerkmale
- Retains the high-power mono class D identity (vs. TAS5261DKDRG4)
- Better lifecycle position for new production (vs. TAS5261DKDRG4)
- Mechanical reuse for existing HSSOP layouts (vs. TAS5261DKDRG4)
Designhinweise
The 36-HSSOP exposed-pad region is the primary thermal path for this 315 W class D power stage. Implement the manufacturer-recommended copper area and via array, keep the output current paths compact, and avoid thermal cross-talk from surrounding regulators. Validate the highest expected ambient temperature while the speaker load is continuously driven, because dissipation depends on supply voltage, output power, and switching loss.
Follow the manufacturer reference layout for the digital input, control signals, supply connections, exposed pad, and output filter. Place input and control traces away from the high-current switching nodes, and minimize the loop area of decoupling connections. The gull-wing package provides accessible pins, but correct land geometry and pad assignment remain necessary for both electrical performance and repeatable assembly.
Class D output edges contain high-frequency energy, so use the recommended LC filter and keep the switching node copper as small as practical. Route the filtered loudspeaker output away from sensitive input and control nets, and use a solid ground reference. Validate radiated and conducted emissions with the speaker cable and enclosure installed because the external wiring can materially change the EMI result.
Do not treat the green-tape suffix as proof of functional interchangeability. TI notes that some TAS5261DKDRG4 datasheet entries required confirmation, and the original TAS5261DKDR is end-of-life. Before substituting, compare pin functions, digital-interface timing, supply limits, protection behavior, output-filter requirements, and thermal data for the exact ordering code.
Compliance-Informationen
The commercial-grade audio power stage is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this ordering code and remain unknown.