AVISO DE ÚLTIMA COMPRA: TAS5261DKDR está próximo al fin de vida. Fecha límite de pedido: Contáctenos. Ver piezas alternativas disponibles →
Texas Instruments

TAS5261DKDR - 315W Mono Class D Power Stage | Texas Instruments

N.º de pieza: TAS5261DKDR ✗ Fin de vida
8 ohm Rds(on) 36-HSSOP, gull-wing surface mount Package
MOQ: 1 |

TAS5261DKDR Descripción general

The Texas Instruments TAS5261DKDR is a 315 W mono bridged-load-tie class D digital power stage packaged in a 36-terminal HSSOP. It is designed for high-efficiency audio amplification where a compact solution must deliver substantial continuous output power to a low-impedance loudspeaker. The device accepts digital audio data and operates as a mono class D output stage, supporting compact consumer and professional audio systems.

A class D power stage is a switching amplifier topology that controls current through the speaker output at high frequency. Compared with a linear audio amplifier, the switching approach reduces the power dissipated in the output devices and enables high output power with smaller magnetic components. In the wider power-management hierarchy, the TAS5261 belongs to the class D amplifier family, which falls under audio amplifier ICs and, more broadly, power management semiconductors.

Key characteristics include 315 W rated mono output power, a single-channel class D architecture, a 36-HSSOP package, and a bridged-load-tie speaker configuration. The HSSOP package uses a gull-wing surface-mount form factor and exposes a thermal pad for heat removal when the device is mounted according to the manufacturer's recommended land pattern. Its operating voltage, output-stage limits, thermal characteristics, and signal-interface timing should be confirmed against the specific version of the manufacturer datasheet before layout release.

Typical implementations include powered speakers, compact home-theater enclosures, soundbars, multimedia speaker systems, subwoofer amplifier modules, and industrial audio products driven by an external audio processor. Because the device is a power stage rather than a complete codec-equipped amplifier, upstream circuitry must supply the required digital audio stream and control signals. A properly designed LC output filter is required to remove high-frequency switching energy before the loudspeaker.

Layout is the dominant design consideration. Place the input, control, power, and output-network connections according to the datasheet reference layout, minimize loop area in high-current switching paths, and provide substantial copper area for thermal dissipation. Verify junction temperature at worst-case supply voltage, output power, and ambient temperature rather than relying on nominal board temperature alone.

This page adds application-focused implementation guidance, pin-compatible sourcing information, and a structured comparison of the documented operating characteristics. Use the manufacturer datasheet and reference layout as the controlling documents for production design, EMC tuning, and thermal validation.

Alternativas directas para TAS5261DKDR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

TAS5261DKDRG4

✅ Sustitución directa
📦 36-HSSOP
Active lifecycle status versus end-of-life TAS5261DKDR; both are listed as 315 W mono BTL power stages in the same 36-HSSOP package

📋 Alternativa de referencia (no en el catálogo)

TAS5261DKDR Valores máximos y características eléctricas

Device Type Mono class D digital amplifier power stage
Number of Channels 1 channel
Rated Output Power 315 W mono
Configuración de salida Mono bridged-load-tie (BTL)
Power Stage Topology Class D switching amplifier
Encapsulado 36-HSSOP, gull-wing surface mount
Number of Terminals 36
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
Tipo de montaje Surface mount
Recommended Minimum Load Resistance 8 ohm
Input Signal Type Single input signal with differential output

Guía de configuración de pines de TAS5261DKDR rectangular

Configuración de pines para TAS5261DKDR (encapsulado rectangular). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado rectangular para TAS5261DKDR

No hay datos detallados de patillaje disponibles para TAS5261DKDR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TAS5261DKDR es adecuado para 6 aplicacións: Powered Subwoofer Module, Compact Home-Theater Speaker, Multimedia Speaker System, Soundbar Subwoofer Amplifier, Professional Active Monitor, Industrial Audio Announcement System.

🎧

Powered Subwoofer Module

The TAS5261DKDR fits a high-output subwoofer module because it combines a 315 W mono BTL power stage with a digital audio input architecture. An upstream audio processor can provide the required data and control signals while the power stage drives a low-impedance driver. The main design constraint is thermal: the HSSOP exposed-pad region must be tied to a generous copper area with thermal vias, and continuous output must be checked at the minimum intended supply voltage.

📺

Compact Home-Theater Speaker

A compact home-theater speaker can use the TAS5261DKDR as a high-efficiency mono power stage for a woofer or full-range driver. The 315 W rating provides substantial headroom for transient audio peaks, while class D switching reduces the heat that must be removed compared with a comparable linear output stage. Use the recommended differential output network and isolate the amplifier from speaker wiring noise with correctly sized and rated inductors.

🔊

Multimedia Speaker System

The TAS5261DKDR is appropriate for multimedia speaker systems that require high power in a small enclosure and accept a digital audio input. Its single-channel BTL architecture suits one driver per module and avoids a conventional series output capacitor in the recommended circuit. The design must include a low-noise digital audio source, correct I2C-style control signaling, an LC filter, and thermal validation under sustained music output.

🎬

Soundbar Subwoofer Amplifier

In a soundbar subwoofer amplifier, the TAS5261DKDR provides a compact way to drive a low-impedance driver from a digital audio bus. The 315 W mono rating supports high short-term audio peaks, but enclosure temperature and acoustic loading strongly affect sustainable output. Place the switching output network and loudspeaker connector in accordance with the reference layout to suppress EMI and maintain predictable acoustic output.

🎚️

Professional Active Monitor

An active monitor or studio near-field speaker can use the TAS5261DKDR for a high-output woofer channel. The class D architecture improves conversion efficiency and reduces thermal burden, allowing substantial amplifier output from a relatively compact board. Because large monitor cabinets can retain heat, validate the amplifier at sustained full-power operation with the passive crossover and enclosure loaded rather than at no-load bench conditions.

🏭

Industrial Audio Announcement System

The TAS5261DKDR can drive a high-power announcement or public-address driver in a mono bridged configuration. The 315 W class D power stage suits ruggedized audio equipment where efficiency, output power, and thermal performance are priorities. The system integrator must verify the control interface, configure the manufacturer output filter, and confirm that the loudspeaker and wiring load match the device's documented operating conditions.

What is the TAS5261DKDR?
The TAS5261DKDR is a Texas Instruments 315 W mono class D digital amplifier power stage in a 36-HSSOP package. It uses a bridged-load-tie speaker output and is intended for high-power, high-efficiency audio amplification. According to the manufacturer datasheet, the device is a 315 W mono BTL digital amplifier power stage rather than a complete audio codec or signal-processing amplifier.
What is the output power of TAS5261DKDR?
The TAS5261DKDR is rated for 315 W of mono output power. The datasheet title identifies the part as a 315 W mono BTL digital amplifier power stage, and distributor catalog data describes it as a 315 W mono bridged-load-tie device. Actual continuous output depends on supply voltage, load impedance, thermal conditions, and the system power-loss budget.
How many channels and outputs does TAS5261DKDR have?
The TAS5261DKDR has one mono output channel and uses a differential bridged-load-tie output configuration. Its single input signal drives two power-output paths that are combined differentially at the loudspeaker. This arrangement removes the need for a conventional output coupling capacitor when it is used in the manufacturer-recommended circuit.
What package does TAS5261DKDR use?
The TAS5261DKDR uses a 36-HSSOP package with gull-wing leads and a rectangular surface-mount body. Catalog data lists 36 terminals and a commercial temperature grade. The package includes a power-dissipation structure intended for board-level copper thermal spreading, so land-pattern accuracy and thermal via placement are essential.
Is TAS5261DKDR still active?
The TAS5261DKDR is designated end-of-life, while Texas Instruments identifies TAS5261DKDRG4 as the active version of the same device family. According to the TI audio support forum, the manufacturer notified customers that TAS5261DKDR was going EOL and that TAS5261DKDRG4 remained active. New production designs should evaluate the active variant.
What is the difference between TAS5261DKDR and TAS5261DKDRG4?
TAS5261DKDR is the end-of-life version, while TAS5261DKDRG4 is the active TI version in the same 36-HSSOP family. Both are listed as 315 W mono BTL digital amplifier power stages. The TI support discussion notes that some datasheet entries for the G4 version were incomplete and should be confirmed with the manufacturer before a formal substitution.
What can replace TAS5261DKDR?
TAS5261DKDRG4 is the closest documented drop-in candidate because it retains the same 36-HSSOP package, 315 W mono class D power-stage description, and bridged-load-tie output arrangement. Confirm the supply-voltage range, digital-interface timing, thermal limits, and every pin function in the manufacturer documentation before approving the substitution. No verified cross-brand drop-in replacement was identified.
When should I choose TAS5261DKDRG4 instead of TAS5261DKDR?
Choose TAS5261DKDRG4 for new production designs because it is the active version, while TAS5261DKDR is end-of-life. Both share the same 315 W mono BTL class D identity and 36-HSSOP package, which can simplify mechanical reuse. Nevertheless, verify pinout, interface timing, and operating limits rather than assuming that the green-tape suffix alone guarantees interchangeability.
Is TAS5261DKDR suitable for a subwoofer amplifier?
Yes, TAS5261DKDR is suitable for a subwoofer power-amplifier module when the load, supply voltage, thermal design, and input interface meet its operating requirements. Its 315 W mono BTL topology is well matched to a single low-impedance driver. Use the manufacturer-recommended output filter and thermal layout, and verify continuous power at the lowest intended supply-voltage condition.
Where can I download the TAS5261DKDR datasheet PDF?
The TAS5261DKDR datasheet PDF is available through the Texas Instruments document link listed on this page and through the mirrored PDF identified in the technical document results. The document describes a 21-page 315 W mono BTL digital amplifier power stage. Always compare the document revision with the ordering information before releasing a production design.
Where can I find the TAS5261DKDR pinout?
The TAS5261DKDR pinout is identified in the manufacturer datasheet under the terminal description and pin configuration sections for the 36-HSSOP package. The catalog description confirms 36 gull-wing terminals in a rectangular surface-mount package. Use the datasheet pin table and recommended land pattern when assigning nets because several terminals support power-stage and thermal functions.
What are the key specifications of TAS5261DKDR that engineers should know?
The principal specifications are 315 W mono output power, a class D switching power-stage topology, bridged-load-tie differential output, and a 36-HSSOP surface-mount package. The device is categorized as a commercial-grade single-channel audio amplifier power stage. Supply voltage, signal timing, efficiency, thermal resistance, and protection limits must be taken from the exact manufacturer datasheet.
Does TAS5261DKDR need an output filter?
The TAS5261DKDR requires the recommended output filtering network in a practical loudspeaker amplifier design. Its class D switching outputs contain high-frequency energy, so a properly designed LC network isolates the speaker and controls EMI. Component values, inductor ratings, and capacitor types should follow the manufacturer reference circuit and be validated with measured switching-waveform and radiated-emissions testing.
Where can I buy TAS5261DKDR?
Use the Request a Quote form on this page to request current availability, minimum order quantity, and delivery scheduling for TAS5261DKDR. Because the original part is designated end-of-life, the active TAS5261DKDRG4 variant may be the more practical procurement choice for new builds. Provide the target quantity, reel or tray packaging requirement, and intended annual usage.
What is the lead time for TAS5261DKDR?
Current lead time for TAS5261DKDR should be requested through the Request a Quote form on this page. Because TAS5261DKDR is end-of-life while TAS5261DKDRG4 remains active, supply continuity and scheduling may differ between the two versions. Include your required quantity, build schedule, and approved alternate list with the quote request.
How should TAS5261DKDR be thermally managed?
Manage TAS5261DKDR thermals with the manufacturer-recommended PCB land pattern, maximum exposed-pad copper area, and a dense pattern of thermal vias. Heat flow in a class D power stage depends on supply voltage, output power, switching loss, and ambient temperature. Validate the hottest corner of the enclosure at continuous rated output rather than estimating junction temperature from room-temperature measurements.

Datos de referencia de ingeniería para TAS5261DKDR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Use TAS5261DKDR for existing designs that already use the original part and can obtain controlled end-of-life supply, provided the exact datasheet revision supports the required supply voltage, interface timing, and thermal conditions. For new production, TAS5261DKDRG4 is the preferred choice because TI identifies it as active and it retains the same 315 W mono BTL class D description and 36-HSSOP package. Treat the substitution as pin-compatible only after checking every pin function, control timing, output-filter network, protection behavior, and PCB thermal path. Neither device removes the need for a correctly designed LC speaker filter, high-current decoupling, and substantial exposed-pad copper. A cross-brand alternative should not be selected solely from output-power and package similarity because the digital interface and control protocol may differ.

Comparación con alternativas

Parámetro Este producto TAS5261DKDRG4
Brand Texas Instruments Texas Instruments
Package 36-HSSOP 36-HSSOP
Lifecycle Status End-of-life Active
Output Power 315 W mono 315 W mono
Channel Count 1 channel 1 channel
Amplifier Class Class D Class D
Output Configuration Mono BTL differential output Mono BTL differential output
Terminal Count 36 36

Diferenciadores clave

  • Retains the high-power mono class D identity (frente a TAS5261DKDRG4)
  • Better lifecycle position for new production (frente a TAS5261DKDRG4)
  • Mechanical reuse for existing HSSOP layouts (frente a TAS5261DKDRG4)

Notas de diseño

The 36-HSSOP exposed-pad region is the primary thermal path for this 315 W class D power stage. Implement the manufacturer-recommended copper area and via array, keep the output current paths compact, and avoid thermal cross-talk from surrounding regulators. Validate the highest expected ambient temperature while the speaker load is continuously driven, because dissipation depends on supply voltage, output power, and switching loss.

Follow the manufacturer reference layout for the digital input, control signals, supply connections, exposed pad, and output filter. Place input and control traces away from the high-current switching nodes, and minimize the loop area of decoupling connections. The gull-wing package provides accessible pins, but correct land geometry and pad assignment remain necessary for both electrical performance and repeatable assembly.

Class D output edges contain high-frequency energy, so use the recommended LC filter and keep the switching node copper as small as practical. Route the filtered loudspeaker output away from sensitive input and control nets, and use a solid ground reference. Validate radiated and conducted emissions with the speaker cable and enclosure installed because the external wiring can materially change the EMI result.

Do not treat the green-tape suffix as proof of functional interchangeability. TI notes that some TAS5261DKDRG4 datasheet entries required confirmation, and the original TAS5261DKDR is end-of-life. Before substituting, compare pin functions, digital-interface timing, supply limits, protection behavior, output-filter requirements, and thermal data for the exact ordering code.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The commercial-grade audio power stage is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this ordering code and remain unknown.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TAS5261DKDR datasheet TAS5261DKDR pinout TAS5261DKDR datasheet pdf TAS5261DKDR 36-HSSOP TAS5261DKDR vs TAS5261DKDRG4 TAS5261DKDR replacement TAS5261DKDR drop-in substitute TAS5261DKDR 315W class D Texas Instruments TAS5261DKDR TAS5261DKDR mono BTL amplifier TAS5261DKDR subwoofer amplifier TAS5261DKDR price TAS5261DKDR stock

Componentes & términos relacionados

Texas Instruments TAS5261DKDR TAS5261DKDRG4 class D amplifier digital amplifier power stage mono audio amplifier bridged-load-tie BTL output 315 W power stage 36-HSSOP HSSOP package family surface-mount package gull-wing lead digital audio input loudspeaker LC output filter switching amplifier power management IC audio amplifier IC exposed-pad thermal dissipation thermal via array electromagnetic interference commercial temperature grade end-of-life
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ