Texas Instruments

THS4223PWP - Dual 230MHz R-R Output Amplifier | TI

Teilenummer: THS4223PWP ✗ Abgekündigt
1.35 V to 7.5 V Vdss 900 mA Id TSSOP-14 with exposed PowerPAD Package
MOQ: 1 |

THS4223PWP Übersicht

The Texas Instruments THS4223PWP is a dual voltage-feedback operational amplifier with a 230 MHz gain-bandwidth product, rail-to-rail output capability, and output current capability up to 900 mA. The device operates from a 1.35 V to 7.5 V supply in a 14-pin HTSSOP PowerPAD package, making it suitable for low-voltage, high-speed signal-chain designs.

A high-speed voltage-feedback operational amplifier is a linear IC that increases the amplitude of an input signal while using negative feedback to establish gain and bandwidth. This device belongs to the operational amplifier hierarchy, which includes voltage-feedback and current-feedback amplifiers used for signal conditioning, analog conversion, buffering, and drive applications. Its low supply-voltage range supports portable, industrial, communications, and test-equipment systems where circuit area and power consumption are tightly constrained.

The THS4223PWP provides two amplifier channels, rail-to-rail output swing, and a bandwidth of 230 MHz. Its high output-current capability enables it to drive heavier loads than a conventional small-signal high-speed amplifier. The operating temperature range is -40 °C to +85 °C, supporting industrial-temperature equipment. The PowerPAD-backed TSSOP package also offers a practical thermal path when the exposed pad is connected to the PCB ground plane.

The rail-to-rail output architecture is especially useful when driving analog-to-digital converter inputs, video preamplifier stages, or other downstream circuits whose signal range approaches the available supply voltage. Because the amplifier operates down to 1.35 V, it can support compact systems in which conventional high-speed amplifiers would require a larger supply. The 900 mA output-current figure must still be evaluated against thermal limits, load impedance, supply voltage, and the output waveform before it is treated as a continuous operating point.

Typical applications include low-voltage ADC signal conditioning, video preamplification, communications-interface amplification, test and measurement front ends, and general-purpose high-speed buffering. In these systems, the 230 MHz bandwidth provides signal-path bandwidth while the dual configuration can reduce the number of active components needed for balanced or two-channel circuitry. The exposed thermal pad and short high-speed feedback paths remain important for preserving stability and usable bandwidth.

PCB implementation should follow the manufacturer datasheet layout and component recommendations, particularly for decoupling capacitors, exposed-pad grounding, and feedback routing. Keep high-speed feedback traces short, provide a low-impedance return path beneath the device, and avoid placing sensitive analog inputs beside digital switching nodes. Check the output-current and thermal limits for the intended load rather than relying only on the headline current capability.

This product record combines the confirmed THS4223PWP electrical, package, and sourcing information with engineering-oriented application guidance, pin-architecture cautions, and drop-in replacement analysis. It is intended to support faster component selection for designs requiring high-speed, low-voltage, rail-to-rail-output amplification.

Drop-in-Alternativen für THS4223PWP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

THS4223IPWP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 HTSSOP-14 with exposed PowerPAD
Temperature-grade ordering suffix differs while the core device retains the 230 MHz bandwidth and dual-amplifier configuration; operating limits must be confirmed against the manufacturer ordering table

📋 Referenzalternative (nicht im Katalog)

THS4223PWP Grenzwerte & elektrische Eigenschaften

Number of Amplifier Channels 2 circuits
Amplifier Type Voltage Feedback
Supply Voltage Range 1.35 V to 7.5 V
Gain-Bandwidth Product 230 MHz
Output Current Capability 900 mA
Output Swing Rail-to-Rail
Betriebstemperaturbereich -40 °C to +85 °C
Package Type TSSOP-14 with exposed PowerPAD
Anzahl der Pins 14 pins
Terminal Count 14 terminals
Montagestil Surface Mount
Temperature Grade Industrial

THS4223PWP tssop-14 with exposed powerpad Pinbelegungsleitfaden

Pinbelegung für THS4223PWP (tssop-14 with exposed powerpad-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für THS4223PWP im tssop-14 with exposed powerpad-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für THS4223PWP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

THS4223PWP ist geeignet für 6 Anwendungs: Low-Voltage ADC Signal Conditioning, Video Preamplification, Communications Signal Conditioning, Test and Measurement Front End, Portable Analog Signal Conditioning, Industrial Sensor Interface.

⚡

Low-Voltage ADC Signal Conditioning

The THS4223PWP fits low-voltage ADC front ends because its 1.35 V to 7.5 V supply range supports compact analog systems and its 230 MHz gain-bandwidth product provides ample bandwidth for fast conversion signals. The dual configuration can condition two channels while preserving matching and reducing board area. Its rail-to-rail output is useful when the amplifier must approach the available signal range. Before selecting the gain, verify ADC input capacitance, settling requirements, noise, and the maximum input common-mode voltage against the manufacturer electrical tables.

📺

Video Preamplification

The THS4223PWP is suitable for video preamplification because its 230 MHz bandwidth supports high-speed video signals and its rail-to-rail output can maximize swing within a compact low-voltage design. The 900 mA output-current capability can also drive heavier downstream loads than a conventional small-signal amplifier. In a video path, use short traces, maintain a continuous ground reference, and place decoupling close to the supply pins. Cable loading, gain distribution, output impedance, and the required video bandwidth should be evaluated before finalizing the stage.

🌐

Communications Signal Conditioning

The THS4223PWP can condition low-level communications signals when a system requires high bandwidth, rail-to-rail output swing, and more output drive than a conventional precision amplifier provides. Its 1.35 V minimum supply supports compact radio, interface, and data-conversion circuits, while the dual configuration allows two related channels in one package. Power-supply rejection, input common-mode range, and distortion should be checked at the operating gain and frequency. Keep the feedback network and input traces short to avoid parasitic feedback and bandwidth loss.

🔧

Test and Measurement Front End

The 230 MHz bandwidth of the THS4223PWP makes it useful in high-speed test and measurement front ends, buffer stages, and instrumentation signal paths. Rail-to-rail output improves utilization of low-voltage test ranges, while the two channels can be used for differential or dual-channel conditioning. The exposed PowerPAD must be connected to a suitable ground plane to improve heat transfer. Engineers should account for probe capacitance, fixture loading, source impedance, and gain-bandwidth interaction, particularly when configuring a low-noise amplifier for DC or low-frequency measurements.

📱

Portable Analog Signal Conditioning

The THS4223PWP suits portable analog signal-conditioning systems because its supply voltage can extend down to 1.35 V, reducing the power burden associated with higher-voltage analog rails. The 230 MHz bandwidth supports fast sensor, data-conversion, and buffer paths, while rail-to-rail output increases usable signal excursion in compact hardware. Designers must verify supply rejection, output settling, and thermal performance at the intended frequency. Low-noise layout, local bypass capacitors, and a solid exposed-pad ground connection are especially important in small enclosures with limited heat spreading.

🏭

Industrial Sensor Interface

The dual THS4223PWP can amplify and buffer two sensor-related channels in an industrial interface when the system operates from a low-voltage rail and requires high bandwidth. Rail-to-rail output supports downstream circuitry with limited headroom, while the dual configuration helps reduce component count. Confirm the input common-mode range before connecting sensors because rail-to-rail output does not imply rail-to-rail input operation. Sensor excitation, grounding, shielding, settling time, and protection requirements should be evaluated independently of the amplifier's headline bandwidth and output-current capability.

Zusammenfassung der empfohlenen Produkte

MCP3561RT-E/MB Low-voltage high-speed ADC signal-chain companion Verwendet in: Low-Voltage ADC Signal Conditioning MCP3562RT-E/MB Precision ADC interface candidate Verwendet in: Low-Voltage ADC Signal Conditioning THS4062IDR Texas Instruments Verwendet in: Video Preamplification THS4223PWP Texas Instruments Verwendet in: Video Preamplification SI3016-F-FSR Silicon Labs Verwendet in: Communications Signal Conditioning SI3050-E-GT Silicon Labs Verwendet in: Communications Signal Conditioning MCP6041-E/MS Microchip Technology Verwendet in: Test and Measurement Front End ADF4351BCPZ Analog Devices Verwendet in: Test and Measurement Front End ATSAML11E15A-MF Microchip Technology Verwendet in: Portable Analog Signal Conditioning MCP3560-24I/SN Low-voltage ADC acquisition companion Verwendet in: Portable Analog Signal Conditioning MCP3421-E/SN Precision sensor acquisition companion Verwendet in: Industrial Sensor Interface MCP6001-E/SN General-purpose low-voltage signal buffer option Verwendet in: Industrial Sensor Interface
What is the operating voltage of THS4223PWP?
The THS4223PWP operates from a 1.35 V to 7.5 V supply. According to the THS4223PWP specification information, it is a dual voltage-feedback amplifier with rail-to-rail output swing, making it suitable for low-voltage systems that require high signal bandwidth without a conventional 5 V or higher analog supply.
What are the key specifications of THS4223PWP?
The THS4223PWP is a dual voltage-feedback operational amplifier with a 230 MHz gain-bandwidth product, rail-to-rail output, up to 900 mA output-current capability, and a 1.35 V to 7.5 V supply range. It is packaged as a 14-pin HTSSOP PowerPAD device and is specified over -40 °C to +85 °C for industrial-temperature operation.
How many amplifier channels does THS4223PWP have?
The THS4223PWP contains two voltage-feedback amplifier channels. The confirmed device description identifies it as a 2-circuit differential amplifier, allowing one package to serve two signal paths while providing a common 1.35 V to 7.5 V operating supply range.
Is THS4223PWP suitable for high-speed ADC signal conditioning?
The THS4223PWP is suitable for high-speed ADC signal conditioning because it combines a 230 MHz gain-bandwidth product with rail-to-rail output swing. These characteristics support low-voltage, wide-band signal paths, although gain, output swing, noise, stability, and settling behavior must be checked against the particular ADC input specification.
What package does THS4223PWP use?
The THS4223PWP uses a 14-pin HTSSOP package with an exposed PowerPAD and a plastic body. The exposed pad provides a thermal and grounding path when assembled according to the manufacturer layout. Its surface-mount form factor supports compact analog and mixed-signal designs.
Where can I find the THS4223PWP datasheet and pin information?
The THS4223PWP datasheet and package information are available from the Texas Instruments product documentation and the linked specification page. Use the manufacturer pin-description table and package drawing when assigning PCB nets because the PWP package includes 14 gull-wing terminals plus an exposed thermal pad that is not a conventional signal pin.
What is the output-current capability of THS4223PWP?
The published output-current capability of the THS4223PWP is 900 mA. That value describes the device's current capability, not permission to operate continuously at 900 mA without checking supply voltage, load impedance, output waveform, package thermal resistance, and the limits stated in the manufacturer datasheet.
What is the operating temperature range of THS4223PWP?
The THS4223PWP is specified for an operating temperature range of -40 °C to +85 °C. This industrial-temperature range supports equipment expected to operate across controlled industrial environments, provided the PCB layout provides adequate thermal coupling from the exposed PowerPAD.
Where can I buy THS4223PWP and check current availability?
Use the Request a Quote form on this page to request current THS4223PWP availability, lead time, and commercial terms. Because legacy inventory can change quickly, the request should identify the required quantity and package suffix so sourcing can confirm the exact 14-pin HTSSOP PowerPAD configuration.
What is the price of THS4223PWP?
Current commercial pricing for the THS4223PWP should be obtained through the Request a Quote form on this page. The request should state the required quantity and packaging preference, allowing the sourcing team to confirm availability and the exact pricing basis for this legacy amplifier.
What is the lead time for THS4223PWP?
The current lead time for THS4223PWP depends on remaining legacy inventory and the requested quantity. Submit the required quantity through the Request a Quote form on this page so sourcing can confirm the most accurate fulfillment estimate rather than relying on a historical inventory duration.
Is THS4223PWP in stock?
Stock availability for THS4223PWP should be confirmed through the Request a Quote form on this page. Because this is a legacy operational-amplifier package, availability can vary by quantity and replenishment status, so procurement should request the exact MPN rather than rely on a general category-level inventory indication.
THS4223PWP vs THS4223IPWP - which is better for an industrial design?
Choose the variant whose temperature grade, qualification records, and electrical limits exactly match the production requirements. The THS4223PWP is specified from -40 °C to +85 °C; before substituting THS4223IPWP, confirm its ordering information, pin configuration, package construction, lifecycle status, and electrical ratings in the manufacturer documentation.
What can replace THS4223PWP?
The closest replacement must use the same 14-terminal HTSSOP PowerPAD footprint and provide compatible differential input, output, supply, enable, and power-down pin assignments. A functional high-speed amplifier is not automatically a drop-in replacement; verify the complete pin table, exposed-pad connection, output-current capability, stability, and shutdown behavior before substitution.
Is there a drop-in cross-brand replacement for THS4223PWP?
No verified cross-brand drop-in replacement was identified for the THS4223PWP. A substitute is only a true drop-in option if it matches the 14-terminal HTSSOP PowerPAD land pattern, pin functions, 1.35 V to 7.5 V operating range, rail-to-rail output behavior, and required high-current drive capability; otherwise a PCB or circuit redesign is necessary.

Technische Referenzdaten für THS4223PWP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the THS4223PWP when a design needs two high-speed voltage-feedback channels, operation from a supply as low as 1.35 V, rail-to-rail output swing, and unusually strong output-drive capability in a compact HTSSOP PowerPAD package. It is particularly relevant to low-voltage ADC interfaces, video preamplifiers, communications conditioning, and instrumentation front ends where bandwidth and drive matter more than extremely low offset voltage or microamp-class bias current. The THS4223IPWP is the closest same-family ordering candidate because it retains the dual, 230 MHz, rail-to-rail architecture in the same package, but its temperature-grade suffix, lifecycle status, and complete electrical limits must be confirmed before substitution. No verified cross-brand drop-in replacement was identified. Therefore, do not treat another high-speed dual amplifier as interchangeable unless its complete pin table, exposed-pad connection, supply range, output swing, current limit, and stability characteristics match the original circuit requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt THS4223IPWP
Brand Texas Instruments Texas Instruments
Package HTSSOP-14 with exposed PowerPAD HTSSOP-14 with exposed PowerPAD
Number of Channels 2 2
Gain-Bandwidth Product 230 MHz 230 MHz
Output Architecture Rail-to-Rail Rail-to-Rail

Wichtigste Unterscheidungsmerkmale

  • Very low minimum supply voltage for a high-speed dual amplifier (vs. THS4223IPWP)
  • Substantial output drive combined with high bandwidth (vs. THS4223IPWP)
  • Rail-to-rail output improves low-voltage signal utilization (vs. THS4223IPWP)

Designhinweise

The exposed PowerPAD is the primary thermal path for the THS4223PWP. Follow the manufacturer exposed-pad layout and connect the pad to the PCB ground plane with adequate vias. Output-current capability is not the same as continuous permissible dissipation; verify the load waveform, ambient temperature, package thermal data, and copper area before operating near the 900 mA device capability.

Place the required supply-bypass capacitors directly beside the power and ground terminals, and keep the high-speed feedback components and traces as short as practical. The PWP footprint includes an exposed pad in addition to the 14 gull-wing terminals. Use the manufacturer land pattern rather than constructing a generic TSSOP-14 footprint, because pad dimensions and thermal-via requirements can differ.

Avoid routing the input, feedback, and output paths near switching-node return currents. A continuous ground plane under the amplifier and short feedback loops help prevent parasitic feedback and loss of the intended 230 MHz bandwidth. For ADC and video interfaces, terminate cables and controlled-impedance traces according to the actual channel specification, and verify settling with realistic load capacitance.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was confirmed for this exact MPN.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

THS4223PWP datasheet THS4223PWP specifications THS4223PWP pinout THS4223PWP datasheet pdf THS4223PWP replacement THS4223PWP equivalent THS4223PWP footprint THS4223PWP 230MHz amplifier THS4223PWP 1.35V op amp THS4223PWP powerpad schematic THS4223PWP vs THS4223IPWP Texas Instruments THS4223PWP

Verwandte Bauteile & Begriffe

Texas Instruments THS4223PWP THS4223IPWP Operational Amplifier Voltage Feedback Amplifier Linear Integrated Circuit Signal Conditioning Amplifier IC Rail-to-Rail Output Gain-Bandwidth Product 230 MHz 900 mA 1.35 V to 7.5 V HTSSOP-14 PowerPAD Exposed Thermal Pad Surface Mount Low-Voltage ADC Video Preamplifier Communications Interface Test and Measurement Industrial Sensor Interface RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen