THS4223PWP - Dual 230MHz R-R Output Amplifier | TI
부품 번호: THS4223PWP ✗ 단종THS4223PWP 개요
A high-speed voltage-feedback operational amplifier is a linear IC that increases the amplitude of an input signal while using negative feedback to establish gain and bandwidth. This device belongs to the operational amplifier hierarchy, which includes voltage-feedback and current-feedback amplifiers used for signal conditioning, analog conversion, buffering, and drive applications. Its low supply-voltage range supports portable, industrial, communications, and test-equipment systems where circuit area and power consumption are tightly constrained.
The THS4223PWP provides two amplifier channels, rail-to-rail output swing, and a bandwidth of 230 MHz. Its high output-current capability enables it to drive heavier loads than a conventional small-signal high-speed amplifier. The operating temperature range is -40 °C to +85 °C, supporting industrial-temperature equipment. The PowerPAD-backed TSSOP package also offers a practical thermal path when the exposed pad is connected to the PCB ground plane.
The rail-to-rail output architecture is especially useful when driving analog-to-digital converter inputs, video preamplifier stages, or other downstream circuits whose signal range approaches the available supply voltage. Because the amplifier operates down to 1.35 V, it can support compact systems in which conventional high-speed amplifiers would require a larger supply. The 900 mA output-current figure must still be evaluated against thermal limits, load impedance, supply voltage, and the output waveform before it is treated as a continuous operating point.
Typical applications include low-voltage ADC signal conditioning, video preamplification, communications-interface amplification, test and measurement front ends, and general-purpose high-speed buffering. In these systems, the 230 MHz bandwidth provides signal-path bandwidth while the dual configuration can reduce the number of active components needed for balanced or two-channel circuitry. The exposed thermal pad and short high-speed feedback paths remain important for preserving stability and usable bandwidth.
PCB implementation should follow the manufacturer datasheet layout and component recommendations, particularly for decoupling capacitors, exposed-pad grounding, and feedback routing. Keep high-speed feedback traces short, provide a low-impedance return path beneath the device, and avoid placing sensitive analog inputs beside digital switching nodes. Check the output-current and thermal limits for the intended load rather than relying only on the headline current capability.
This product record combines the confirmed THS4223PWP electrical, package, and sourcing information with engineering-oriented application guidance, pin-architecture cautions, and drop-in replacement analysis. It is intended to support faster component selection for designs requiring high-speed, low-voltage, rail-to-rail-output amplification.
드롭인 대체품: THS4223PWP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
THS4223IPWP
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
THS4223PWP 최대 정격 & 전기적 특성
| Number of Amplifier Channels | 2 circuits |
| Amplifier Type | Voltage Feedback |
| Supply Voltage Range | 1.35 V to 7.5 V |
| Gain-Bandwidth Product | 230 MHz |
| Output Current Capability | 900 mA |
| Output Swing | Rail-to-Rail |
| 동작 온도 범위 | -40 °C to +85 °C |
| Package Type | TSSOP-14 with exposed PowerPAD |
| 핀 수 | 14 pins |
| Terminal Count | 14 terminals |
| 장착 스타일 | Surface Mount |
| Temperature Grade | Industrial |
THS4223PWP tssop-14 with exposed powerpad 핀 구성 가이드
THS4223PWP(tssop-14 with exposed powerpad 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: THS4223PWP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
THS4223PWP 적합 용도: 6 애플리케이션s: Low-Voltage ADC Signal Conditioning, Video Preamplification, Communications Signal Conditioning, Test and Measurement Front End, Portable Analog Signal Conditioning, Industrial Sensor Interface.
Low-Voltage ADC Signal Conditioning
The THS4223PWP fits low-voltage ADC front ends because its 1.35 V to 7.5 V supply range supports compact analog systems and its 230 MHz gain-bandwidth product provides ample bandwidth for fast conversion signals. The dual configuration can condition two channels while preserving matching and reducing board area. Its rail-to-rail output is useful when the amplifier must approach the available signal range. Before selecting the gain, verify ADC input capacitance, settling requirements, noise, and the maximum input common-mode voltage against the manufacturer electrical tables.
추천
Video Preamplification
The THS4223PWP is suitable for video preamplification because its 230 MHz bandwidth supports high-speed video signals and its rail-to-rail output can maximize swing within a compact low-voltage design. The 900 mA output-current capability can also drive heavier downstream loads than a conventional small-signal amplifier. In a video path, use short traces, maintain a continuous ground reference, and place decoupling close to the supply pins. Cable loading, gain distribution, output impedance, and the required video bandwidth should be evaluated before finalizing the stage.
추천
Communications Signal Conditioning
The THS4223PWP can condition low-level communications signals when a system requires high bandwidth, rail-to-rail output swing, and more output drive than a conventional precision amplifier provides. Its 1.35 V minimum supply supports compact radio, interface, and data-conversion circuits, while the dual configuration allows two related channels in one package. Power-supply rejection, input common-mode range, and distortion should be checked at the operating gain and frequency. Keep the feedback network and input traces short to avoid parasitic feedback and bandwidth loss.
추천
Test and Measurement Front End
The 230 MHz bandwidth of the THS4223PWP makes it useful in high-speed test and measurement front ends, buffer stages, and instrumentation signal paths. Rail-to-rail output improves utilization of low-voltage test ranges, while the two channels can be used for differential or dual-channel conditioning. The exposed PowerPAD must be connected to a suitable ground plane to improve heat transfer. Engineers should account for probe capacitance, fixture loading, source impedance, and gain-bandwidth interaction, particularly when configuring a low-noise amplifier for DC or low-frequency measurements.
추천
Portable Analog Signal Conditioning
The THS4223PWP suits portable analog signal-conditioning systems because its supply voltage can extend down to 1.35 V, reducing the power burden associated with higher-voltage analog rails. The 230 MHz bandwidth supports fast sensor, data-conversion, and buffer paths, while rail-to-rail output increases usable signal excursion in compact hardware. Designers must verify supply rejection, output settling, and thermal performance at the intended frequency. Low-noise layout, local bypass capacitors, and a solid exposed-pad ground connection are especially important in small enclosures with limited heat spreading.
추천
Industrial Sensor Interface
The dual THS4223PWP can amplify and buffer two sensor-related channels in an industrial interface when the system operates from a low-voltage rail and requires high bandwidth. Rail-to-rail output supports downstream circuitry with limited headroom, while the dual configuration helps reduce component count. Confirm the input common-mode range before connecting sensors because rail-to-rail output does not imply rail-to-rail input operation. Sensor excitation, grounding, shielding, settling time, and protection requirements should be evaluated independently of the amplifier's headline bandwidth and output-current capability.
추천
추천 제품 요약
엔지니어링 참조 데이터: THS4223PWP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | THS4223IPWP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | HTSSOP-14 with exposed PowerPAD | HTSSOP-14 with exposed PowerPAD |
| Number of Channels | 2 | 2 |
| Gain-Bandwidth Product | 230 MHz | 230 MHz |
| Output Architecture | Rail-to-Rail | Rail-to-Rail |
주요 차별점
- Very low minimum supply voltage for a high-speed dual amplifier (vs THS4223IPWP)
- Substantial output drive combined with high bandwidth (vs THS4223IPWP)
- Rail-to-rail output improves low-voltage signal utilization (vs THS4223IPWP)
설계 노트
The exposed PowerPAD is the primary thermal path for the THS4223PWP. Follow the manufacturer exposed-pad layout and connect the pad to the PCB ground plane with adequate vias. Output-current capability is not the same as continuous permissible dissipation; verify the load waveform, ambient temperature, package thermal data, and copper area before operating near the 900 mA device capability.
Place the required supply-bypass capacitors directly beside the power and ground terminals, and keep the high-speed feedback components and traces as short as practical. The PWP footprint includes an exposed pad in addition to the 14 gull-wing terminals. Use the manufacturer land pattern rather than constructing a generic TSSOP-14 footprint, because pad dimensions and thermal-via requirements can differ.
Avoid routing the input, feedback, and output paths near switching-node return currents. A continuous ground plane under the amplifier and short feedback loops help prevent parasitic feedback and loss of the intended 230 MHz bandwidth. For ADC and video interfaces, terminate cables and controlled-impedance traces according to the actual channel specification, and verify settling with realistic load capacitance.
규정 준수 정보
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was confirmed for this exact MPN.