HINWEIS ZUR LETZTEN BESTELLMÖGLICHKEIT: TJA1041T/VM nähert sich dem End-of-Life. Letztes Bestelldatum: Kontaktieren Sie uns. Verfügbare Alternativbauteile ansehen →
NXP Semiconductors

TJA1041T/VM - 1 Mbit/s CAN Transceiver | NXP Semiconductors

Teilenummer: TJA1041T/VM ✗ Abgekündigt
14-pin SOIC Package
MOQ: 1 |

TJA1041T/VM Übersicht

The NXP Semiconductors TJA1041T/VM is a high-speed Controller Area Network transceiver designed for automotive CAN nodes operating at speeds up to 1 Mbit/s. It provides differential transmit and receive functions between a CAN protocol controller and the physical CAN bus, and is offered in a 14-pin SOIC package. The TJA1041 family is listed as End of Life by NXP.

A CAN transceiver is the physical-layer interface between a digital CAN controller and the differential bus wiring. It converts controller logic signals into a dominant or recessive differential bus state and converts bus levels into logic signals for the controller. This type of interface belongs to the hierarchy of CAN transceiver, communication interface IC, interface IC, and semiconductor.

The TJA1041 supports CAN communication rates up to 1 Mbit/s and is primarily intended for high-speed automotive applications. Its differential receiver provides the interface from the bus to the controller, while its differential transmitter connects the node to the CAN network. The TJA1041T/VM package designation identifies the SOIC-14 variant with NXP's VM ordering suffix.

Automotive electronics use CAN networks to connect engine-control, body, chassis, comfort, and diagnostic modules while reducing wiring complexity. A CAN node generally combines a protocol controller with a transceiver such as the TJA1041. The physical transceiver handles bus-level signaling, allowing the controller to exchange frames through a standardized communication interface.

Typical uses include electronic control units, body-control modules, powertrain controllers, gateway electronics, automotive diagnostic interfaces, and industrial CAN equipment connected to 1 Mbit/s networks. Selection should consider bus speed, transceiver logic compatibility, termination strategy, package footprint, operating temperature, and the manufacturer's lifecycle status.

PCB design must preserve the recommended CAN bus routing and termination arrangement, provide a stable transceiver supply, and maintain suitable common-mode behavior for the automotive network. Because the TJA1041T/VM is marked End of Life, new production designs should verify migration options and avoid depending on an unannounced second source.

This product page combines the NXP functional description, package and lifecycle information, ordering references, and practical guidance for selecting, comparing, and implementing a replacement before an End of Life migration.

Drop-in-Alternativen für TJA1041T/VM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

TJA1041T

✅ Drop-In
📦 SOIC-14 (14-SO)
Same TJA1041 family and 14-pin SOIC package; ordering suffix and qualification configuration must be checked

📋 Referenzalternative (nicht im Katalog)

TJA1041T/VM Technische Daten

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 1 Mbit/s
CAN Transmit Function Differential
CAN Receive Function Differential
Primary Application Automotive high-speed CAN
Gehäuse 14-pin SOIC
Montageart Surface mount
Lebenszyklusstatus End of Life
RoHS-Status unknown
REACH Status unknown

TJA1041T/VM 14-pin soic Pinbelegungsleitfaden

Pinbelegung für TJA1041T/VM (14-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für TJA1041T/VM im 14-pin soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TJA1041T/VM.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TJA1041T/VM ist geeignet für 6 Anwendungs: Automotive Electronic Control Unit, Body Control Module, Powertrain Controller, Vehicle Gateway Electronics, Automotive Diagnostic Interface, Industrial CAN Equipment.

🚗

Automotive Electronic Control Unit

The TJA1041T/VM suits an automotive electronic control unit that connects a CAN protocol controller to a physical high-speed CAN network. Its differential transmitter and receiver establish the physical interface, while the documented 1 Mbit/s capability aligns with conventional high-speed vehicle networks. The device is placed close to the controller and bus connection, with the PCB arranged to minimize disruption of the differential signal path. Because the family is marked End of Life, the automotive program must confirm the exact orderable suffix, production schedule, qualification requirements, and approved migration before new vehicle launches.

🚗

Body Control Module

A body control module can use the TJA1041T/VM to interface its CAN controller with switches, door modules, lighting electronics, and other body systems sharing the network. The differential signaling reduces sensitivity to common disturbances found in vehicle wiring, while the 1 Mbit/s rating supports high-speed CAN communication. Component placement should follow the manufacturer's application guidance and keep the CAN bus route compact. For current production programs, designers should review NXP's discontinuance information because a lifecycle change can require schematic confirmation, timing review, and updated supplier qualification records.

⚙️

Powertrain Controller

The TJA1041T/VM can provide the physical CAN interface in a powertrain controller that exchanges diagnostic and control information with vehicle modules. Its documented support for CAN rates up to 1 Mbit/s is appropriate for the high-speed CAN portion of an automotive network, and its differential transmitter and receiver provide the required bus-side functions. A robust layout must account for automotive electrical conditions, including transient immunity and common-mode behavior. The exact ordering suffix should be checked for temperature grade and qualification, and a lifecycle migration should be planned before the device is specified for a new platform.

🌐

Vehicle Gateway Electronics

A vehicle gateway can use the TJA1041T/VM as the CAN-side interface between a communication processor and a high-speed CAN network segment. The transceiver translates between controller-domain signals and the differential physical bus, supporting communication rates as high as 1 Mbit/s. Gateway boards often combine several communication functions, so the designer should preserve separation between sensitive digital routing and the CAN network wiring while following the manufacturer's recommended termination and layout practices. The End of Life designation makes early replacement planning important for platforms expected to remain in production for many years.

🖥️

Automotive Diagnostic Interface

An automotive diagnostic interface can use the TJA1041T/VM to connect diagnostic circuitry or a CAN controller to a high-speed vehicle network. The interface supports differential transmission and reception at CAN rates up to 1 Mbit/s, allowing diagnostic frames to use the same physical network infrastructure as other vehicle modules. The board design must provide the bus interface required by the NXP application guidance and account for vehicle-level common-mode and transient conditions. For new diagnostic equipment, verify the lifecycle and qualification status of the exact suffix rather than treating every member of the TJA1041 family as production-equivalent.

🏭

Industrial CAN Equipment

The TJA1041T/VM can be evaluated for industrial automation equipment that uses a 1 Mbit/s CAN network, provided its electrical limits, temperature range, and automotive qualification status satisfy the application. The differential transmitter and receiver allow a controller to communicate reliably over a multi-node bus while reducing sensitivity to shared ground and cable disturbances. Layout should follow the NXP recommended application circuit and preserve a controlled termination arrangement. Because the product family is marked End of Life, industrial projects should compare an active replacement and verify protocol, timing, and environmental requirements before committing the design.

Zusammenfassung der empfohlenen Produkte

TJA1041T Same-family NXP CAN transceiver ordering option Verwendet in: Automotive Electronic Control Unit, Body Control Module, Powertrain Controller, Vehicle Gateway Electronics, Automotive Diagnostic Interface, Industrial CAN Equipment TJA1057GTK/3Z NXP Semiconductors Verwendet in: Automotive Electronic Control Unit, Body Control Module, Vehicle Gateway Electronics, Industrial CAN Equipment
What is the TJA1041T/VM used for?
The TJA1041T/VM is an NXP high-speed CAN transceiver that connects a CAN protocol controller to a physical differential CAN bus. According to the NXP manufacturer datasheet, it supports automotive high-speed CAN communication up to 1 Mbit/s and provides separate differential transmit and receive paths between the controller and the bus.
What is the maximum data rate of the TJA1041T/VM?
The TJA1041T/VM supports CAN data rates up to 1 Mbit/s. The NXP manufacturer datasheet identifies the device as a high-speed CAN transceiver intended for automotive applications, with a differential transmitter for driving the physical bus and a differential receiver for returning bus state information to the CAN controller.
Where can I download the TJA1041T datasheet PDF?
The official TJA1041 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1041.pdf. It is the appropriate document for checking the complete pin description, electrical limits, application circuit, bus termination requirements, and recommended PCB layout before designing with the TJA1041T/VM.
What package does the TJA1041T/VM use?
The TJA1041T/VM is supplied in a 14-pin SOIC package for surface-mounted PCB assembly. The manufacturer part page and the TJA1041 ordering references identify this package family, while the official datasheet should be used to confirm every terminal name, position, and electrical connection before layout release.
Where can I find the TJA1041T pinout?
The TJA1041T pinout is documented in the official NXP TJA1041 datasheet at https://www.nxp.com/docs/en/data-sheet/TJA1041.pdf. Use the pin-description and package-outline sections to map the transceiver terminals, including supply, ground, controller-interface, and CAN-bus connections, onto the 14-pin footprint.
Is the TJA1041T/VM still active?
The TJA1041T/VM is listed as End of Life by NXP Semiconductors. Engineers should use the product page's shipping-discontinuance and replacement information to define an approved migration plan, especially for automotive programs requiring long production support and controlled change notification.
What can replace the TJA1041T/VM?
The TJA1041T is the closest identified same-brand ordering option for the TJA1041T/VM because it belongs to the same TJA1041 device family and SOIC-14 package, but it must still be checked against the complete ordering information and electrical limits. For new production, an NXP End of Life replacement should be selected rather than assuming that any same-package CAN transceiver is functionally interchangeable.
Is the TJA1041T the same as the TJA1041T/VM?
The TJA1041T and TJA1041T/VM are orderable names within the same NXP TJA1041 family, but the suffix can identify a specific orderable configuration and should not be ignored. According to the NXP manufacturer documentation, confirm the package, temperature grade, tape-and-reel status, and production status for the exact suffix before treating the devices as interchangeable.
Can a competitor replace the TJA1041T/VM drop-in?
A cross-brand drop-in replacement cannot be confirmed from the available manufacturer and comparison records. A candidate must use the same 14-pin SOIC footprint, preserve controller-side logic compatibility, support the required CAN rate and common-mode range, and satisfy the application's automotive qualification requirements; request NXP's formal cross-reference guidance for a controlled migration.
When should I choose the TJA1041T/VM over the TJA1041T?
Choose the TJA1041T/VM when the BOM specifies that exact NXP orderable part and its documented packaging and qualification configuration match the design. Choose the base TJA1041T only after checking the NXP ordering table, because similar family naming alone does not establish identical packing, temperature grade, or lifecycle status.
Is the TJA1041T/VM suitable for automotive CAN networks?
Yes, the TJA1041T/VM is intended for automotive high-speed CAN applications up to 1 Mbit/s according to the NXP manufacturer datasheet. Vehicle suitability must still be confirmed against the exact suffix's operating temperature, qualification, production status, and any manufacturer change notices.
TJA1041T/VM vs TJA1041T: which is better for a new design?
The TJA1041T/VM is preferable only when an existing approved BOM requires that exact orderable configuration. For a new design, the TJA1041T may be preferable if its ordering suffix, qualification, and lifecycle status satisfy the program because the TJA1041T/VM family is identified as End of Life.
What is the best NXP equivalent for the TJA1041T/VM?
The best NXP equivalent must be selected from the manufacturer's shipping-discontinuance and replacement information, with electrical and package compatibility confirmed in the datasheet. The TJA1041T is a same-family candidate, but a formal NXP replacement is preferred for production continuity because the TJA1041T/VM has an End of Life designation.
Where can I buy the TJA1041T/VM?
Use the Request a Quote form on this page to ask for TJA1041T/VM availability, minimum order quantity, and current lead time. Because the manufacturer identifies the family as End of Life, the quote request should also state the required packaging configuration and the date by which the material is needed.
What is the price of the TJA1041T/VM?
Use the Request a Quote form on this page for the current TJA1041T/VM unit price and volume pricing. This part is marked End of Life, so its commercial status, available lot sizes, and delivery schedule can change independently of catalog pricing and should be confirmed for the exact orderable suffix.
Is the TJA1041T/VM in stock and what is its lead time?
Current stock and lead time for the TJA1041T/VM should be requested through the Request a Quote form on this page. Because the product family is listed as End of Life, include your required quantity, package configuration, shipment destination, and production schedule so the response reflects actual legacy-material availability.
What are the key specifications engineers should know about TJA1041T/VM?
The principal documented specifications are a maximum CAN rate of 1 Mbit/s, differential transmit and receive functions, a 14-pin SOIC package, and an automotive high-speed CAN focus. Supply voltage, logic thresholds, common-mode range, temperature limits, and ESD ratings should be taken directly from the NXP manufacturer datasheet for the selected orderable configuration.

Technische Referenzdaten für TJA1041T/VM – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TJA1041T/VM when an approved BOM requires that exact NXP orderable configuration and the application can accept an End of Life component with an active legacy-material plan. Choose the TJA1041T when its complete ordering code, qualification, and lifecycle status satisfy the design and a same-family 14-pin SOIC footprint allows reuse of the PCB. For a cross-brand replacement, do not rely only on package similarity: verify pin behavior, controller logic levels, CAN data rate, common-mode range, ESD performance, temperature rating, and automotive qualification. New high-volume automotive programs generally require a current manufacturer replacement or a formally approved cross-reference. The TJA1057GTK/3Z may be useful for functional comparison, but the available information does not establish it as a drop-in SOIC-14 substitute for the TJA1041T/VM.

Vergleich mit Alternativen

Parameter Dieses Produkt TJA1041T
Package SOIC-14 (14-SO) SOIC-14 (14-SO)
Brand NXP Semiconductors NXP Semiconductors
Product Type High-speed CAN transceiver High-speed CAN transceiver
Maximum CAN Data Rate 1 Mbit/s 1 Mbit/s
Transmit Interface Differential Differential
Receive Interface Differential Differential
Primary Application Automotive high-speed CAN Automotive high-speed CAN

Wichtigste Unterscheidungsmerkmale

  • Documented high-speed CAN capability (vs. TJA1041T)
  • Identical family architecture and footprint (vs. TJA1041T)
  • Direct automotive CAN positioning (vs. TJA1041T)

Designhinweise

Follow the NXP TJA1041 recommended application circuit and PCB layout for the CANH and CANN connections. Keep the differential bus route compact and continuous, minimize stubs and branch points, and place the termination component at the physical end of the bus rather than beside the transceiver when the network topology requires distributed termination. These routing practices reduce reflections and help preserve signal integrity on the differential bus.

Design the transceiver supply path with the voltage range, current behavior, and decoupling requirements stated in the manufacturer datasheet. Place the required input capacitance close to the supply and ground pins and keep the return path short. Verify startup, bus dominance, recessive-state behavior, and supply tolerance across the complete operating range rather than checking only nominal operation.

Do not treat similar TJA1041 orderable names as automatically interchangeable. Check the full suffix, package, temperature grade, automotive qualification, tape-and-reel configuration, and lifecycle status in the NXP ordering information. Since the family is marked End of Life, obtain a documented manufacturer replacement or engineering change approval before updating a released vehicle or industrial design.

Separate CAN-bus routing from sensitive analog and high-speed digital paths, and use a continuous ground reference beneath the interface where the package and board construction allow it. Keep the transceiver's bus-side components close to their associated pins and avoid adding long test pads or unused branches to the differential network. Validate the final routing with the manufacturer's guidelines and, where applicable, signal-integrity simulation.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available manufacturer information identifies the TJA1041T as End of Life and describes automotive high-speed CAN use, but it does not state the required compliance conclusions for this exact ordering suffix.

Ähnliche Suchanfragen

tja1041t datasheet tja1041t datasheet pdf TJA1041T/VM datasheet TJA1041T/VM pinout TJA1041T SOIC-14 pinout TJA1041T/VM replacement TJA1041T/VM equivalent TJA1041T vs TJA1041T/VM NXP TJA1041T/VM TJA1041T/VM price TJA1041T/VM stock 1 Mbit/s CAN transceiver SOIC-14

Verwandte Bauteile & Begriffe

NXP Semiconductors TJA1041T/VM TJA1041T TJA1057GTK/3Z Controller Area Network CAN transceiver high-speed CAN physical-layer interface CAN protocol controller differential transmitter differential receiver automotive electronics body control module powertrain controller vehicle gateway diagnostic interface industrial CAN 1 Mbit/s SOIC-14 surface mount semiconductor CAN bus automotive high-speed CAN End of Life NXP TJA1041 datasheet
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen