Texas Instruments

TUSB8042RGCR - 4-Port 5 Gbps USB 3.1 Hub | Texas Instruments

Teilenummer: TUSB8042RGCR ✓ Aktiv
USB 3.1, USB 2.0, and USB 1.1 Rds(on) 64-pin VQFN (RGC), 9 x 9 mm Package 5.0 Gbps Speed
MOQ: 1 |

TUSB8042RGCR Übersicht

The Texas Instruments TUSB8042RGCR is a four-port SuperSpeed USB 3.1 hub controller supporting data rates up to 5.0 Gbps, with USB 2.0 and USB 1.1 compatibility, in a 64-pin VQFN (RGC) package. It is designed to extend multiple USB connections across desktop computers, industrial equipment, test systems, and peripheral-heavy embedded platforms.

A USB hub controller is an interface integrated circuit that manages one upstream USB connection and multiple downstream ports. Within the hierarchy of USB interface controllers, it adds device enumeration, port routing, power-management coordination, and traffic arbitration while allowing USB peripherals to share one host controller. The TUSB8042RGCR combines SuperSpeed and legacy USB support in one device, simplifying system design where both high-bandwidth storage and conventional peripherals must coexist.

The principal features include four downstream ports, SuperSpeed operation at 5.0 Gbps, and backward compatibility with Full Speed and High Speed USB devices. GPIO, I2C, and SMBus interfaces support configuration and supervisory functions. Per-port power switching and overcurrent detection improve fault isolation when a downstream device faults. The manufacturer specifies a commercial operating range of 0°C to 70°C for the TUSB8042RGCR ordering option.

Internally, the controller coordinates traffic between the upstream host-facing port and four downstream USB ports while maintaining independent command, data, and status paths needed for USB connectivity. This integrated hub architecture reduces the number of discrete USB interface and switching elements required in a design. The exposed-pad VQFN construction also supports thermal transfer into a multilayer PCB, an important consideration when several attached devices can drive continuous data activity.

Typical uses include external docking stations, laboratory data-acquisition equipment, industrial USB expansion, computer accessories, and embedded systems that need multiple USB connections. In each case, the five-gigabit SuperSpeed path is useful for storage, cameras, and other high-throughput peripherals, while legacy support allows existing USB 1.1 and USB 2.0 devices to operate without separate downstream controllers.

Design the board with the exposed pad connected to the ground plane and follow the manufacturer’s recommended decoupling and high-speed layout guidance. Place decoupling capacitance close to supply pins, provide a continuous reference plane beneath the high-speed region, and route differential pairs with matched geometry. Verify power-distribution capacity and overcurrent behavior for the intended downstream-load combination.

This page consolidates the manufacturer ordering information, package characteristics, verified source links, compatible same-package options, and practical PCB guidance for engineers evaluating the TUSB8042RGCR as a four-port USB hub controller.

Drop-in-Alternativen für TUSB8042RGCR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit TUSB8042RGCR (gleiche Bauform und Footprint) – abweichend in Maximum Data Rate, Number of Downstream Ports, Package, Product Type.

Texas Instruments
Maximum Data Rate: 5 Gbps (SuperSpeed)
Number of Downstream Ports: 4
Package: 64-VQFN (RGC) 9x9 mm with exposed pad
Vergleichen mit TUSB8042RGCR →
Texas Instruments
Maximum Data Rate: 5.0 Gbps
Number of Downstream Ports: 4 ports
Product Type: USB 3.1 SuperSpeed hub controller
Vergleichen mit TUSB8042RGCR →

TUSB8042AIRGCR

✅ Drop-In
📦 VQFN-64 (RGC)
Operating temperature changes from 0°C to 70°C to -40°C to 85°C, a 75°C lower minimum and 15°C higher maximum; core hub function and package are retained

📋 Referenzalternative (nicht im Katalog)

TUSB8042RGCT

✅ Drop-In
Texas Instruments
📦 VQFN-64 (RGC)
USB 3.1 SuperSpeed hub controller · 4 ports · 5.0 Gbps · USB 3.1 Gen 1 · 1 port · GPIO · I2C and SMBus · plus or minus 100 ppm or better

Preis auf Anfrage

Datenblatt ansehen →

TUSB8042RGCR Technische Daten

Device Type 4-Port SuperSpeed USB 3.1 Hub Controller
Number of USB Ports 4 downstream ports
SuperSpeed Maximum Data Rate 5.0 Gbps
USB Standards Compatibility USB 3.1, USB 2.0, and USB 1.1
Maximum SuperSpeed Data Rate 5.0 Gbps
Gehäuse 64-pin VQFN (RGC), 9 x 9 mm
Pin-Anzahl 64 pins
Betriebstemperaturbereich 0°C to 70°C
Control Interfaces GPIO, I2C, and SMBus
Downstream Port Power Management Per-port power switching
Fault Protection Per-port overcurrent detection
Montageart Surface Mount
Package Thermal Pad Exposed pad

TUSB8042RGCR exposed pad Pinbelegungsleitfaden

Pinbelegung für TUSB8042RGCR (exposed pad-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für TUSB8042RGCR im exposed pad-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für TUSB8042RGCR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

TUSB8042RGCR ist geeignet für 6 Anwendungs: Desktop USB-C Docking Station, Industrial USB Data Acquisition, Test and Measurement Equipment, External Storage and Media Hub, Embedded USB Expansion Board, Security and Surveillance Peripherals.

🖥️

Desktop USB-C Docking Station

The TUSB8042RGCR fits a desktop docking station that must expose several USB ports while preserving a 5.0 Gbps SuperSpeed path for storage or display-adjacent peripherals. Its four downstream ports can serve a mixture of high-speed and legacy devices because the controller supports USB 3.1, USB 2.0, and USB 1.1 connections. GPIO, I2C, and SMBus provide avenues for system monitoring and configuration. The important design trade-off is power: each downstream port can draw current, so the dock’s supply must be sized for the worst permitted combination and protected by the hub’s per-port switching and overcurrent-detection functions.

🏭

Industrial USB Data Acquisition

The TUSB8042RGCR can serve as the USB expansion controller in industrial acquisition equipment that connects several peripherals to one host port. The 5.0 Gbps SuperSpeed capability supports high-throughput data paths, while legacy compatibility permits existing USB 1.1 and USB 2.0 sensors or control devices to remain connected. Per-port overcurrent detection helps isolate a faulty cable or attached load, and power switching supports controlled downstream-port management. For installations operating below 0°C or above 70°C, select the industrial-temperature TUSB8042AI family variant and verify its complete pin and electrical compatibility.

🔧

Test and Measurement Equipment

The TUSB8042RGCR is appropriate for test and measurement systems that need multiple external USB connections without dedicating a host controller to every peripheral. A SuperSpeed port at up to 5.0 Gbps accommodates instrument data transfers, while USB 2.0 and USB 1.1 compatibility allows legacy mice, service interfaces, and adapters to remain attached. The controller’s I2C, SMBus, and GPIO interfaces can assist board-level configuration and supervisory control. Designers should maintain short high-speed routes, continuous reference planes, and adequate supply decoupling because simultaneous SuperSpeed traffic can increase board-level power and signal-integrity requirements.

💾

External Storage and Media Hub

The TUSB8042RGCR can centralize external storage, card readers, and media devices in a powered hub enclosure. Its four SuperSpeed ports operate at up to 5.0 Gbps, reducing the bandwidth constraint associated with multi-device copying, backup, and media ingestion workflows. USB 2.0 and USB 1.1 compatibility lets users connect older accessories without separate controllers. The engineering priority is a power budget: the hub supply and copper paths must support the intended number of active ports, while per-port overcurrent detection limits the effect of an individual downstream fault. Keep the 5.0 Gbps differential routing away from noisy switching nodes.

🧩

Embedded USB Expansion Board

The TUSB8042RGCR is useful on an embedded expansion board that converts one host USB connection into four downstream ports for sensors, storage, cameras, or service interfaces. The mixed-speed compatibility reduces the need for separate USB 2 and USB 3 controllers, while the exposed-pad VQFN package requires careful thermal and layout planning. GPIO, I2C, and SMBus can share the system control bus or implement port-status monitoring. Because the TUSB8042RGCR is specified for 0°C to 70°C, an enclosure exposed to wider industrial temperatures requires an extended-temperature variant and a complete review of electrical, timing, and pin compatibility.

🎥

Security and Surveillance Peripherals

The TUSB8042RGCR can manage several cameras or other high-bandwidth security peripherals in an edge system with a single host-side USB connection. SuperSpeed operation at up to 5.0 Gbps provides useful headroom for video transfer, while legacy compatibility supports maintenance keyboards, configuration adapters, and lower-rate sensors. Per-port switching and overcurrent detection improve resilience when peripheral power faults occur. The hub does not replace independent security isolation or power conditioning, so system engineers should still provision appropriate protection and enforce separate physical and logical trust boundaries for sensitive equipment.

What is the TUSB8042RGCR?
The TUSB8042RGCR is a four-port SuperSpeed USB 3.1 hub controller from Texas Instruments. According to the manufacturer product information, it supports data rates up to 5.0 Gbps and backward compatibility with USB 2.0 and USB 1.1 devices. The device is packaged in a 64-pin VQFN (RGC) measuring 9 x 9 mm and is intended for systems requiring several USB downstream ports behind one host connection.
How many USB ports does the TUSB8042RGCR support?
The TUSB8042RGCR supports four downstream USB ports in addition to its upstream host-facing connection. According to the Texas Instruments product page, the hub provides SuperSpeed operation at up to 5.0 Gbps while retaining compatibility with Full Speed and High Speed USB devices. This combination allows a system to connect high-throughput storage alongside lower-speed peripherals through one hub controller.
Where can I download the TUSB8042RGCR datasheet PDF?
The official TUSB8042 documentation is available through the Texas Instruments product page for the TUSB8042. The ordering-information page for TUSB8042RGCR identifies the exact RGC package configuration, while the main product page provides the device data and supporting documentation. Use the manufacturer’s pin-description table and layout guidance when assigning all 64 package connections and designing the exposed-pad thermal path.
Where can I find the TUSB8042RGCR pinout?
The TUSB8042RGCR pinout is identified in the pin-description table of the Texas Instruments TUSB8042 datasheet. The exact device uses a 64-pin VQFN (RGC) package with an exposed pad and a 0°C to 70°C commercial temperature range. Use the manufacturer table to confirm every supply, ground, USB, configuration, and signal assignment before laying out the PCB.
What are the key specifications of TUSB8042RGCR that engineers should know?
The TUSB8042RGCR is a four-port USB hub controller with SuperSpeed operation up to 5.0 Gbps, USB 2.0 and USB 1.1 compatibility, and GPIO, I2C, and SMBus interfaces. According to Texas Instruments ordering information, it is offered in a 64-pin VQFN (RGC) package for operation from 0°C to 70°C. Per-port power switching and overcurrent detection add downstream fault-management capability.
Is the TUSB8042RGCR suitable for industrial USB expansion?
The TUSB8042RGCR is suitable for USB expansion designs that operate within its specified 0°C to 70°C commercial temperature range. Its four SuperSpeed ports support up to 5.0 Gbps, while compatibility with USB 2.0 and USB 1.1 permits mixed-speed peripherals. The related TUSB8042AI industrial option covers -40°C to 85°C, so designs requiring extended-temperature operation should use that version instead.
TUSB8042RGCR vs TUSB8042AIRGCR - which is better for industrial use?
The TUSB8042AIRGCR is the better choice when the system must operate from -40°C to 85°C, while the TUSB8042RGCR is specified for 0°C to 70°C. According to the Texas Instruments TUSB8042A ordering information, both variants use the 64-pin RGC package and provide the same four-port SuperSpeed hub function. Confirm complete electrical and pin compatibility with the manufacturer before substituting one ordering option for another.
When should I choose TUSB8042RGCR over another four-port USB hub controller?
Choose the TUSB8042RGCR when a design needs four downstream SuperSpeed USB ports at up to 5.0 Gbps, mixed USB 2.0 and USB 1.1 compatibility, and integrated per-port switching and overcurrent detection. The Texas Instruments device also provides GPIO, I2C, and SMBus control interfaces. It is particularly appropriate when the commercial 0°C to 70°C range and 64-pin VQFN footprint meet the enclosure and layout requirements.
What is the best drop-in replacement for TUSB8042RGCR?
The closest documented same-package option is the Texas Instruments TUSB8042AIRGCR, which uses the same 64-pin RGC package and provides the four-port SuperSpeed hub function. Its principal engineering difference is the -40°C to 85°C industrial temperature range compared with 0°C to 70°C for the TUSB8042RGCR. The TUSB8042RGCT has the same electrical function but differs only in reel packaging, so it adds little replacement value.
Can TUSB8042RGCT replace TUSB8042RGCR?
The TUSB8042RGCT is electrically suitable for replacement because its terminals and package match the TUSB8042RGCR, and the comparison identifies consistent performance and functional characteristics. Both use the RGC 64-pin package configuration. Their primary ordering difference is the tape-and-reel packaging code, so engineers must confirm the reel orientation, packing quantity, and board-level supply requirements before substitution.
What can replace TUSB8042RGCR in a USB hub design?
The TUSB8042AIRGCR is the most useful same-footprint replacement identified for a four-port USB hub design because it retains the 64-pin RGC package and SuperSpeed hub function. The alternative changes environmental qualification from the commercial 0°C to 70°C range to the industrial -40°C to 85°C range. A cross-brand replacement should not be assumed without documented pin-to-pin and signal-compatibility evidence.
What is the best Texas Instruments equivalent for TUSB8042RGCR?
The best same-manufacturer functional equivalent identified is the TUSB8042AIRGCR, which retains the four-port 5.0 Gbps SuperSpeed hub architecture in a 64-pin RGC package and expands the operating range to -40°C to 85°C. The TUSB8042RGCT is another compatible ordering option with the same core electrical function, but it is primarily a different tape-and-reel packing code and therefore adds less design value.
Is TUSB8042RGCR the same as TUSB8042RGCT?
The TUSB8042RGCR and TUSB8042RGCT provide the same four-port SuperSpeed USB hub function and use the same 64-pin RGC package, but their ordering codes indicate different reel packing configurations. According to the component comparison, their main performance parameters and terminals are consistent. They can therefore be treated as electrically compatible options, subject to confirming production packing and orientation requirements.
Where can I buy TUSB8042RGCR online?
The TUSB8042RGCR can be requested through the Request a Quote form on this page, where the exact suffix and required reel quantity should be stated. Current commercial pricing, stock, and lead time should be confirmed through that form before placing a purchase order. The manufacturer ordering page identifies TUSB8042RGCR as a 64-pin RGC commercial-temperature configuration.
What is the price of TUSB8042RGCR?
The current commercial price of TUSB8042RGCR is not quoted in the visible product content because exact-suffix inventory and quantity pricing can change. Submit a request through the Request a Quote form on this page with the required quantity, reel configuration, and delivery location. That request provides a current quotation for the exact TUSB8042RGCR ordering option rather than a generic family price.
What is the lead time and stock status for TUSB8042RGCR?
Current lead time and stock status for the exact TUSB8042RGCR suffix should be confirmed through the Request a Quote form on this page. Include the required order quantity, packaging format, and target delivery date in the request. The Texas Instruments ordering page confirms the 64-pin RGC configuration and 0°C to 70°C commercial temperature grade.

Technische Referenzdaten für TUSB8042RGCR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the TUSB8042RGCR for a commercial-temperature, four-port SuperSpeed USB hub operating from 0°C to 70°C. Its 5.0 Gbps SuperSpeed path, compatibility with USB 2.0 and USB 1.1 devices, GPIO, I2C, and SMBus interfaces, and integrated per-port switching and overcurrent detection cover the core requirements of docks, test systems, storage hubs, and industrial USB expansion boards. Select the TUSB8042AIRGCR when the enclosure requires operation from -40°C to 85°C; it retains the same RGC package and hub architecture but provides a wider temperature range. The TUSB8042RGCT is electrically compatible and uses the same 64-pin RGC package, but it is principally a different tape-and-reel ordering code. Use it when production packing or reel orientation matches that option. Neither documented same-package alternative replaces the need to confirm downstream power limits, reference configuration, high-speed layout, and exact firmware or host requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt TUSB8042AIRGCR TUSB8042RGCT
Package 64-pin VQFN (RGC), 9 x 9 mm 64-pin VQFN (RGC) 64-pin VQFN (RGC)
Brand Texas Instruments Texas Instruments Texas Instruments
Device Type 4-Port SuperSpeed USB 3.1 Hub Controller 4-Port SuperSpeed USB 3.1 Hub Controller 4-Port SuperSpeed USB 3.1 Hub Controller
SuperSpeed Data Rate 5.0 Gbps 5.0 Gbps 5.0 Gbps
Downstream Port Count 4 ports 4 ports 4 ports
Operating Temperature Range 0°C to 70°C -40°C to 85°C 0°C to 70°C
Legacy USB Compatibility USB 2.0 and USB 1.1 USB 2.0 and USB 1.1 USB 2.0 and USB 1.1
Control Interfaces GPIO, I2C, and SMBus GPIO, I2C, and SMBus GPIO, I2C, and SMBus
Per-Port Power Switching Supported Supported Supported
Per-Port Overcurrent Detection Supported Supported Supported

Wichtigste Unterscheidungsmerkmale

  • Four-port SuperSpeed expansion in one hub controller (vs. TUSB8042RGCT)
  • Commercial-grade ordering option with mixed-speed USB support (vs. TUSB8042AIRGCR)
  • Integrated downstream fault-management functions (vs. TUSB8042RGCT)

Designhinweise

Use the manufacturer layout recommendations for the RGC package, connect the exposed pad to the ground plane, and place input and internal supply decoupling capacitors close to their associated pins. Maintain continuous reference planes beneath the SuperSpeed routes. Differential pair geometry should remain matched and should be kept free of stubs, test pads that lack a proper transition, and intervening plane splits.

Size the USB power-distribution network for the maximum intended combination of downstream loads rather than a single attached device. Verify supply droop, current-limit behavior, inrush, and per-port overcurrent thresholds across startup and fault conditions. The hub controller coordinates port power, but the board still needs appropriately rated switches, protection, copper, and a supply capable of supporting the selected load profile.

The exposed pad is a primary thermal path for this VQFN package. Use the manufacturer’s land pattern and thermal design guidance, provide uninterrupted ground copper beneath and around the pad, and avoid placing thermal breaks in high-current or high-speed regions. Validate the final enclosure and ambient-temperature assumptions during thermal testing, especially when several SuperSpeed peripherals operate concurrently.

Route SuperSpeed differential pairs as impedance-controlled, length-matched interconnects over a continuous reference plane. Keep connector and ESD-protection transitions short, and place any required AC coupling or protection devices according to the manufacturer’s reference layout. Avoid routing USB signals beside switching regulators, high-current inductors, crystal circuits, or other likely noise sources.

Do not select a replacement solely because the package drawing looks identical. Confirm exact electrical ratings, temperature grade, pin assignment, exposed-pad connection, firmware or configuration requirements, and production packing orientation. The TUSB8042RGCR is a commercial-temperature option, so an extended-temperature design requires a suitable industrial variant and a documented compatibility review.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available manufacturer ordering information identifies the package and temperature range but does not state the requested compliance details. The TUSB8042RGCR is a commercial 0°C to 70°C ordering option; the related TUSB8042AI industrial option is specified from -40°C to 85°C.

Ähnliche Suchanfragen

TUSB8042RGCR datasheet TUSB8042RGCR pinout TUSB8042RGCR datasheet pdf Texas Instruments TUSB8042RGCR TUSB8042RGCR equivalent TUSB8042RGCR replacement TUSB8042RGCR cross reference TUSB8042RGCR vs TUSB8042AIRGCR TUSB8042RGCR price TUSB8042RGCR stock TUSB8042 VQFN-64 pinout TUSB8042 four port USB hub TUSB8042 5 Gbps hub controller TUSB8042RGCR application circuit

Verwandte Bauteile & Begriffe

Texas Instruments TUSB8042 TUSB8042RGCR TUSB8042AIRGCR TUSB8042RGCT USB hub controller SuperSpeed USB USB 3.1 USB 2.0 USB 1.1 GPIO I2C SMBus per-port power switching overcurrent detection 5.0 Gbps VQFN-64 RGC package QFN family surface-mount technology USB Type-C docking station industrial USB expansion test and measurement equipment external storage hub embedded USB expansion high-speed differential routing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen