Microchip Technology

VSC8494YJE-12 - Dual/Quad 10GE PHY | Microchip Technology

Teilenummer: VSC8494YJE-12 ✗ Abgekündigt
780-FCBGA Package
MOQ: 1 |

VSC8494YJE-12 Übersicht

The Microchip Technology VSC8494YJE-12 is a high-performance Ethernet interface IC described as a dual/quad 10GE PHY with OTN-FEC, intended for advanced telecom and networking equipment. The device is housed in a 780-FCBGA package measuring 29 x 29 mm and supports serial networking interfaces including SFI and XFI. Its position in the networking hierarchy is Ethernet physical-layer and transport interface, where it links high-speed line-side equipment to optical or copper transport paths.

A 10GE PHY is an Ethernet physical-layer transceiver that converts parallel digital data into high-speed serial signaling for network transmission and converts incoming serial signals back into digital data. The VSC8494YJE-12 combines dual/quad 10GbE capability with OTN-FEC functionality, making it suitable for equipment that requires Ethernet throughput and forward-error-correction capability in the same high-density package. The 780-FCBGA construction supports complex, high-pin-count telecom designs while requiring careful PCB layout and thermal management.

The verified product information identifies the VSC8494YJE-12 as an Ethernet switch device and as a dual/quad 10GE PHY with OTN-FEC. These descriptions establish its principal use in carrier-grade Ethernet, optical transport, and other high-speed network-interface applications. It is also identified as a telecom interface IC with SFI and XFI serial interfaces, which are important to systems using serializer/deserializer links between line cards, optical modules, and network processors.

Because this product is supplied in a 780-FCBGA package, its implementation is not limited by pin count in the same way as a small-outline package. The package can expose extensive high-speed differential I/O, supply rails, reference interfaces, control signals, and configuration pins. Board design should therefore treat power delivery, return paths, connector and transceiver placement, and thermal spreading as a single system-level problem. The exact pin assignments, voltage requirements, and recommended power architecture should be taken directly from the Microchip product documentation.

Typical applications include 10GbE line cards, optical transport modules, Ethernet aggregation equipment, access and metro network systems, and telecom racks requiring dense high-speed connectivity. In these systems, the device can serve as the line-side Ethernet interface when optical transport requires OTN-FEC and serializer framing alongside 10GbE traffic. Design selection should account for the required number of channels, supported line rate, host interface, optical-module architecture, thermal budget, and board-level test access.

Engineers should use the manufacturer datasheet for the complete 780-ball pin map, recommended power supplies, reference-clock requirements, high-speed differential pair assignments, and PCB stack-up guidance. The package is large and pin-dense, so connector launch geometry, return vias, impedance control, and thermal vias directly affect signal integrity. Avoid making substitute decisions from function descriptions alone; a valid replacement must match the 780-FCBGA footprint, ball assignments, electrical limits, interface configuration, and system-specific requirements.

This product page combines distributor availability references, the manufacturer-direct product result, cross-reference information, and engineering guidance focused on package reuse, signal integrity, thermal design, and qualification. It is intended to help hardware engineers evaluate whether the VSC8494YJE-12 fits a dense 10GbE telecom design and where to obtain the definitive datasheet and current commercial response.

Drop-in-Alternativen für VSC8494YJE-12 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

VSC8494YJE-12 Technische Daten

Product Type Dual/quad 10GE PHY with OTN-FEC
Device Classification Telecom interface IC / Ethernet switch
Ethernet Data Rate 10 GbE
Channel Configuration Dual/quad
Forward Error Correction OTN-FEC
Supported Serial Interfaces SFI and XFI
Package Type 780-FCBGA
Package Dimensions 29 x 29 mm
Package Pin Count 780 balls
Montageart Surface mount
Primary Application Advanced telecom and networking equipment
Ethernet Application 10GbE line-side networking
Optical Transport Application OTN equipment with forward-error correction

VSC8494YJE-12 780 balls Pinbelegungsleitfaden

Pinbelegung für VSC8494YJE-12 (780 balls-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für VSC8494YJE-12 im 780 balls-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für VSC8494YJE-12.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

VSC8494YJE-12 ist geeignet für 6 Anwendungs: 10GbE Telecom Line Cards, Optical Transport Modules, Carrier Ethernet Aggregation, Metro Network Equipment, Data-Center Network Interface Cards, Network Processor Line Cards.

🌐

10GbE Telecom Line Cards

The VSC8494YJE-12 fits a 10GbE line card where the board must terminate multiple high-speed Ethernet lanes and connect them to network-processing or switching electronics. Its dual/quad 10GE PHY description provides a direct architectural match for line-rate Ethernet interfaces, while OTN-FEC can support transport-oriented designs. The 780-FCBGA exposes the numerous I/O, supply, clock, and control connections expected in this application. Layout should use the manufacturer reference design and preserve continuous return paths beneath every high-speed differential pair.

🌐

Optical Transport Modules

The VSC8494YJE-12 is appropriate for optical transport equipment that combines 10GbE traffic with OTN framing and forward-error-correction functions. Its SFI and XFI interfaces support serial connectivity between the PHY, optical modules, and line-card processing electronics. A designer should allocate separate high-speed routing zones, control impedance through the manufacturer-recommended stack-up, and validate channel loss and jitter with the selected optical and electrical components.

🖥️

Carrier Ethernet Aggregation

Carrier Ethernet aggregation equipment can use the VSC8494YJE-12 at the line-side Ethernet boundary, where multiple 10GbE paths must be converted into serial links for transport circuitry. The dual/quad topology supports denser implementations than a single-lane PHY, while OTN-FEC is useful when the equipment participates in optical transport. Because the device uses a 780-FCBGA, the PCB should provide dense power delivery, many ground connections, and thermal spreading beneath the package.

🏭

Metro Network Equipment

Metro access and transport systems often combine Ethernet service interfaces with optical line-side processing. The VSC8494YJE-12's dual/quad 10GE PHY capability, OTN-FEC support, and SFI/XFI interfaces align with that architecture. The device should be placed to minimize high-speed trace loss and maintain a short path to clock, optical-module, or network-processor connections. Its large FCBGA requires assembly validation and a thermal design that addresses both steady-state and burst traffic conditions.

🖥️

Data-Center Network Interface Cards

The VSC8494YJE-12 can serve in a specialized 10GbE network interface card when OTN-FEC and SFI/XFI connectivity justify the high-density implementation. It is most relevant to carrier-grade, edge, or aggregation hardware rather than ordinary server adapters, where simpler PHYs are often sufficient. The board must satisfy the manufacturer's high-speed layout rules, isolate noisy digital return currents, and provide robust clock distribution to achieve repeatable line-rate operation.

🌐

Network Processor Line Cards

A network-processor line card can use the VSC8494YJE-12 as its high-speed Ethernet-facing interface when the system needs 10GbE lanes combined with transport-oriented FEC. SFI and XFI provide serial links suitable for connecting the PHY section to processors, optical components, or fabric devices. Placement should account for package escape routing and the associated connector or optical-module geometry. Power sequencing and channel-by-channel testing should follow the manufacturer reference design.

What is the VSC8494YJE-12?
The VSC8494YJE-12 is a Microchip Technology Ethernet interface IC described as a dual/quad 10GE PHY with OTN-FEC. It combines 10GbE physical-layer functionality, optical-transport forward-error-correction capability, and SFI/XFI serial interfaces in a 780-FCBGA package. The 29 x 29 mm surface-mount package is intended for advanced telecom, optical transport, and high-speed networking equipment.
Where can I download the VSC8494YJE-12 datasheet PDF?
The official VSC8494YJE-12 product and datasheet entry is available through the Microchip product link on this page. The package contains 780 balls in a 29 x 29 mm FCBGA outline. Before releasing layout or schematic work, obtain the current Microchip datasheet and use its pin-description, recommended operating conditions, reference-design, and PCB-layout sections as the controlling technical documents.
Where can I find the VSC8494YJE-12 pinout?
The complete VSC8494YJE-12 pinout must be taken from the manufacturer datasheet because the device is packaged in a 780-FCBGA and exposes a large, application-specific ball map. Use the ball-assignment table for differential pairs, supply rails, grounds, clocks, resets, and control functions. Do not derive interconnects from a generic FCBGA drawing, because signal assignment and power distribution are device-specific.
What are the key specifications of VSC8494YJE-12 that engineers should know?
The principal VSC8494YJE-12 specifications are its dual/quad 10GbE PHY configuration, OTN-FEC support, SFI and XFI serial interfaces, and 780-FCBGA package with 29 x 29 mm dimensions. Manufacturer and distributor listings consistently identify the part as a telecom Ethernet interface or Ethernet switch device. Exact supply voltages, timing limits, channel rates, and temperature grades should be confirmed from the manufacturer datasheet.
Where to buy the VSC8494YJE-12 online?
Use the Request a Quote form on this page to request the VSC8494YJE-12, current lead time, stock status, and order quantity. The manufacturer-direct listing states that the product is not available for direct online ordering and directs buyers to contact the company for more information. Commercial terms should therefore be confirmed through the quote process rather than inferred from a stale catalog entry.
What is the price of the VSC8494YJE-12?
Current price and volume pricing for the VSC8494YJE-12 should be obtained through the Request a Quote form on this page. The component is a specialized 780-FCBGA telecom interface IC whose commercial terms can depend on configuration, quantity, support requirements, and market availability. The quote workflow provides a current unit response without publishing a figure that may quickly become stale.
What is the lead time for the VSC8494YJE-12?
The current lead time for the VSC8494YJE-12 should be requested through the Request a Quote form on this page. The Microchip direct product result states that the device is not available online and recommends contacting the company for information. Include your production quantity, target date, and forecast horizon so the supplier can provide a meaningful delivery commitment.
Is the VSC8494YJE-12 in stock?
Current VSC8494YJE-12 inventory should be confirmed through the Request a Quote form on this page. Distributor search results identify the component and its 780-FCBGA package, but a product-page presence does not by itself guarantee immediately available stock. Provide the required quantity and scheduled build dates so the quote response can reflect current allocation and lead time.
What is the best drop-in replacement for the VSC8494YJE-12?
No verified drop-in replacement for the VSC8494YJE-12 is established by the available cross-reference information. A valid replacement would need the same 780-FCBGA footprint, matching 780-ball assignments, compatible power and clock interfaces, equivalent SFI/XFI and OTN-FEC behavior, and acceptable 10GbE performance. Use the Request a Quote form if Microchip can identify a current alternate for the exact configuration.
Can another dual/quad 10GE PHY replace the VSC8494YJE-12?
A dual/quad 10GE PHY cannot be assumed to replace the VSC8494YJE-12 merely because its data-rate description matches. Replacement requires exact package, ball-map, power, reference-clock, host-interface, SFI/XFI, OTN-FEC, and signal-integrity compatibility. No candidate satisfying those conditions is confirmed here, so validate any proposed substitute against the Microchip datasheet and the target PCB before using it.
VSC8494YJE-12 vs VSC8564XKS-14 - which is better for telecom?
The VSC8494YJE-12 is identified as a dual/quad 10GE PHY with OTN-FEC in a 780-FCBGA package, whereas the verified listing for VSC8564XKS-14 describes a different Microchip Ethernet PHY in an 80-QFN package. Because the package outlines and stated feature sets differ, VSC8564XKS-14 is not a pin-to-pin substitute for VSC8494YJE-12. The VSC8494YJE-12 is the relevant choice when its 780-ball OTN-FEC architecture is required.
When should I choose the VSC8494YJE-12 over another Ethernet interface IC?
Choose the VSC8494YJE-12 when a dense telecom design specifically requires a dual/quad 10GE PHY, OTN-FEC, SFI or XFI connectivity, and the 780-FCBGA implementation. It is less suitable when a smaller package, a simpler PHY, or a generic Ethernet interface is sufficient. Its high pin count also requires a mature high-layer-count PCB process and disciplined power, return-path, and thermal design.
Is the VSC8494YJE-12 suitable for optical transport equipment?
Yes, the VSC8494YJE-12 is suitable for optical transport equipment that needs its documented OTN-FEC capability alongside dual/quad 10GbE interfaces. Its SFI and XFI serial interfaces can support connections among line cards, optical modules, and network-processing electronics. Final suitability depends on the required line rate, optical module architecture, synchronization scheme, and successful signal-integrity validation.
How should the 780-FCBGA VSC8494YJE-12 be handled for PCB assembly?
The VSC8494YJE-12 requires a controlled assembly process because its 780-FCBGA package contains a dense, fine-pitch ball array. Follow the manufacturer reflow profile, pad-geometry guidance, moisture-handling requirements, and land-pattern instructions exactly. Confirm stencil design, package orientation, X-ray inspection criteria, and board coplanarity with the approved assembly process before production.
What design challenges matter most for the VSC8494YJE-12?
The primary challenges for the VSC8494YJE-12 are high-speed signal integrity, power integrity, thermal management, and dense-package assembly. Maintain the manufacturer's recommended stack-up and differential-pair geometry, provide low-impedance return paths, and keep high-speed nets away from noisy switching stages. Use the documented power and thermal layouts rather than improvising connections on a 780-ball device.
What can replace the VSC8494YJE-12 in an existing PCB?
Only a part with a confirmed identical 780-FCBGA land pattern, compatible 780-ball assignment, equal or acceptable power and I/O requirements, and matching 10GbE, OTN-FEC, SFI, and XFI behavior should replace the VSC8494YJE-12. No such alternate is confirmed by the available cross-reference results. Avoid a board-level substitution based only on a distributor's functional label.

Technische Referenzdaten für VSC8494YJE-12 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

The VSC8494YJE-12 is the appropriate choice for a dense telecom or optical-transport design that specifically needs a dual/quad 10GE PHY with OTN-FEC and SFI/XFI connectivity. Its 780-FCBGA package provides the pin density required for a complex interface IC, but it also raises PCB, assembly, and thermal-engineering requirements. Select a smaller Ethernet PHY when OTN-FEC is unnecessary, fewer 10GbE channels are required, or board-routing simplicity is more important than advanced transport functionality. A different Microchip Ethernet device may be preferable for conventional line cards, but it should not be treated as a direct replacement unless its package, ball map, electrical interface, and FEC behavior are verified as equivalent. Before committing the design, obtain the current Microchip datasheet and reference-design information, confirm operating conditions and supported configurations, then complete signal-integrity, power-integrity, thermal, and assembly validation on the final PCB.

Designhinweise

Use the manufacturer's recommended PCB stack-up, differential impedance, via geometry, and high-speed escape-routing rules for the 780-FCBGA. Maintain a continuous reference plane beneath every high-speed pair, avoid plane splits in the SFI and XFI routing region, and apply the specified length and loss-management techniques. Validate the final design with the intended board material and the assembled module or line card, including connector and package parasitics.

Treat the 780-FCBGA power grid as a complete distribution network rather than a generic set of package balls. Follow the manufacturer plane, via, decoupling, and isolation guidance exactly, and provide local bulk and high-frequency decoupling at each specified rail. Keep switching-converter and digital return currents out of the sensitive analog or high-speed reference paths. Verify rail sequencing, startup behavior, voltage tolerance, and ripple against the datasheet limits.

Plan copper spreading, thermal vias, airflow, and enclosure heat removal for the full 29 x 29 mm FCBGA rather than for its connector area. The dense package can concentrate heat beneath the die, and telecom line cards may operate in constrained racks. Use the manufacturer's power-loss and junction-temperature guidance, model worst-case traffic and ambient conditions, and verify the assembled board with thermocouples or an infrared measurement campaign.

Do not substitute a generic Ethernet PHY based only on the 10GbE label. A valid board replacement must match the 780-FCBGA footprint, ball assignments, voltage domains, clocking, SFI/XFI behavior, OTN-FEC requirements, and configuration method. Also avoid treating a distributor's functional category as a complete datasheet specification; verify electrical limits, pin states, reset behavior, reference clock requirements, and supported test procedures directly with Microchip documentation.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified in the available product information.

Ähnliche Suchanfragen

VSC8494YJE-12 datasheet VSC8494YJE-12 datasheet pdf VSC8494YJE-12 pinout VSC8494YJE-12 780 FCBGA VSC8494YJE-12 equivalent VSC8494YJE-12 replacement VSC8494YJE-12 cross reference VSC8494YJE-12 vs VSC8564XKS-14 VSC8494YJE-12 price VSC8494YJE-12 stock Microchip VSC8494YJE-12 VSC8494YJE-12 10GbE PHY VSC8494YJE-12 OTN-FEC VSC8494YJE-12 SFI XFI VSC8494YJE-12 telecom application

Verwandte Bauteile & Begriffe

Microchip Technology VSC8494YJE-12 VSC8564XKS-14 VSC8541XMV-01 VSC8514XMK-14 Ethernet PHY Ethernet physical-layer transceiver Ethernet interface IC Telecom interface IC Ethernet switch 10GbE 10GE OTN-FEC forward error correction SFI XFI 780-FCBGA FCBGA package surface-mount package optical transport carrier Ethernet metro network power management signal integrity
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen