XC6SLX25-2FTG256C - 24,051-Cell Spartan-6 FPGA | AMD
Teilenummer: XC6SLX25-2FTG256C ✓ AktivXC6SLX25-2FTG256C Übersicht
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA combines configurable logic blocks, block RAM, programmable I/O, clocking, and dedicated fabric into a single device. Within the product hierarchy, the XC6SLX25 is a Spartan-6 LX FPGA, which belongs to the broader FPGA and programmable-logic device family. Compared with fixed-function logic, an FPGA allows design revisions, parallel interfaces, hardware acceleration, and application-specific sequencing to be implemented in one board revision.
The device provides 1,879 logic cells and 3,758 adaptive logic modules according to the published technical listing, together with 936 kbit of embedded memory and 186 I/O. These figures distinguish it from the smaller XC6SLX9 and XC6SLX16 devices in the same family. The 500 MHz internal frequency provides a clear performance reference for clocked digital designs, although actual system performance also depends on the selected architecture, routing, memory interface, and external components.
The FTG256 package is identified as a lead-free 256-ball BGA for this device, and the commercial-grade operating range is 0°C to 85°C. A BGA package supports dense PCB routing and is appropriate for compact industrial, communications, control, test, and embedded-processing systems. Because no large exposed thermal pad is indicated for this package, board construction should be reviewed for heat spreading and soldering-process requirements before volume production.
Typical uses include industrial control logic, data-acquisition front ends, communications protocol conversion, embedded video and networking interfaces, instrumentation, and hardware accelerators. The 186 available I/O sites are particularly useful for parallel buses, counters, status signals, memory interfaces, and multi-channel data paths. The 936 kbit of embedded RAM allows buffering, packet storage, frame data, lookup tables, and general-purpose on-chip memory.
Designers should verify the exact FTG256 ball map, differential-I/O rules, power rails, decoupling, configuration interface, and unused-pin treatment against AMD's Spartan-6 package documentation. PCB layout should preserve short return paths and adequate BGA escape routing, while the clocking and memory interfaces should be constrained according to the device timing specifications.
This product page combines the key device specifications, practical integration guidance, commercial sourcing information, and same-package alternatives. It also distinguishes genuine pin-compatible choices from devices in different packages, helping engineers evaluate an FPGA replacement without assuming that similar logic capacity guarantees PCB compatibility.
Drop-in-Alternativen für XC6SLX25-2FTG256C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC6SLX25-2FTG256C (gleiche Bauform und Footprint) – abweichend in Package, Speed Grade, Device Type, RoHS Status, Adaptive Logic Modules.
XC6SLX25-2FTG256I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC6SLX25-3FTG256I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC6SLX25-1FTG256C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC6SLX25-2FTG256C Grenzwerte & elektrische Eigenschaften
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Cells | 24,051 cells |
| Logic Cells | 1,879 cells |
| Adaptive Logic Modules | 3,758 ALMs |
| Embedded Memory | 936 kbit |
| Internal Frequency | 500 MHz |
| I/O Count | 186 I/O |
| Speed Grade | -2 |
| Temperature Grade | Commercial |
| Betriebstemperatur | 0°C to 85°C |
| Gehäuse | 256-ball lead-free BGA (FTG256) |
| Package Technology | CMOS |
| Montageart | Surface Mount |
| RoHS-Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
XC6SLX25-2FTG256C cmos Pinbelegungsleitfaden
Pinbelegung für XC6SLX25-2FTG256C (cmos-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC6SLX25-2FTG256C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC6SLX25-2FTG256C ist geeignet für 6 Anwendungs: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communications Protocol Conversion, Embedded Video and Image Processing, Test and Measurement Instrumentation, Hardware Accelerator and Embedded Processing.
Industrial Control and Automation
The XC6SLX25-2FTG256C fits compact industrial controllers that combine deterministic control logic with several external interfaces. Its 24,051 logic cells and 3,758 adaptive logic modules can implement state machines, motion sequencing, interlocks, counters, and protocol handling, while 186 I/O sites provide ample connections to sensors, actuators, encoders, and digital equipment. The 500 MHz internal frequency supports clocked control and datapath operations without committing the design to a fixed-function controller. For installations remaining within 0°C to 85°C, the commercial grade reduces qualification burden; systems exposed to wider temperatures should use the industrial suffix. Implement power sequencing, configuration control, and I/O standards with margin verified against the Spartan-6 device documentation.
Empfohlen
Data Acquisition and Signal Conditioning
The XC6SLX25-2FTG256C is useful in acquisition systems that must collect parallel samples, perform digital filtering, and transfer results with predictable timing. Its 186 I/O sites can accommodate multichannel parallel data interfaces, clock and trigger signals, status lines, and external memory or converter interfaces. The 936 kbit of embedded block RAM provides local buffering for samples, descriptors, or control words, reducing pressure on external memory during burst transfers. The 24,051-cell device can divide across data acquisition, decimation, thresholding, and communication functions. Place acquisition and digital processing sections in defined clock domains, constrain interface timing, and account for input threshold, noise, and package-level signal integrity when selecting connector and grounding schemes.
Empfohlen
Communications Protocol Conversion
The XC6SLX25-2FTG256C supports communications equipment that must bridge dissimilar serial, parallel, or packet-oriented interfaces. Its programmable fabric can implement multiple protocol engines, FIFO structures, CRC calculations, and state machines, while 936 kbit of block RAM can buffer packets or maintain channel contexts. The 186 available I/O sites are valuable for parallel buses, control signals, clock recovery support, and multi-chip communication. The commercial temperature range is appropriate for indoor network appliances, test systems, and access equipment with controlled airflow. Validate each interface against its voltage, timing, and I/O-standard requirements, and review the official package file for dedicated configuration, clock, power, and no-connect balls before schematic capture.
Empfohlen
Embedded Video and Image Processing
The XC6SLX25-2FTG256C can implement compact image pipelines, pixel transport, overlays, and control functions when the required interface rates match the device's available resources. Its 24,051 logic cells support parallel pixel manipulation, while 936 kbit of embedded RAM can serve as line buffers, small frame stores, or lookup storage in multi-stage pipelines. The 186 I/O sites provide parallel connections to sensors, displays, memory devices, and serializers. Because video designs are sensitive to timing skew and data-path architecture, register pipeline stages, constrain the video clock, and preserve matched trace lengths where source-synchronous interfaces require them. Validate bandwidth, attainable clock rate, and memory capacity during architecture selection rather than after board layout is complete.
Empfohlen
Test and Measurement Instrumentation
The XC6SLX25-2FTG256C suits programmable test and measurement equipment that combines sequencing, pattern generation, timing control, and result processing. Its programmable logic can implement counters, timing generators, digital pattern engines, and measurement algorithms, while 186 I/O sites allow flexible connection to DUTs and instruments. The 936 kbit of embedded RAM can retain samples, calibration tables, or trace records, and the 500 MHz internal frequency supports clocked digital operations. Commercial-grade operation from 0°C to 85°C fits many laboratory and service instruments, but calibration behavior and thermal drift must be evaluated across the required ambient range. Separate sensitive analog and high-speed digital areas on the PCB and verify timing closure with realistic constraints.
Empfohlen
Hardware Accelerator and Embedded Processing
The XC6SLX25-2FTG256C can implement a hardware accelerator when an algorithm benefits from parallel logic, predictable latency, or dedicated control. The 24,051 logic cells and 3,758 adaptive logic modules provide parallel arithmetic and pipeline resources, while 936 kbit of block RAM can hold lookup data, coefficients, queues, or scratch buffers. Its 186 I/O sites permit coexistence with external processors, memory, and high-speed interfaces, allowing the FPGA to act as a coprocessor rather than a standalone controller. Partition the design into fixed-latency pipelines and slow control paths, document where maximum clocking is safe, and avoid relying on nominal internal frequency as a guaranteed interface rate. Confirm DSP resources and memory architecture in the device documentation before committing to a multiply-heavy workload.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC6SLX25-2FTG256C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC6SLX25-2FTG256I | XC6SLX25-3FTG256I | XC6SLX25-1FTG256C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | FTG256 | FTG256 - same | FTG256 - same | FTG256 - same |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells |
| Adaptive Logic Modules | 3,758 ALMs | 3,758 ALMs | 3,758 ALMs | 3,758 ALMs |
| Embedded Memory | 936 kbit | 936 kbit | 936 kbit | 936 kbit |
| I/O Count | 186 I/O | 186 I/O | 186 I/O | 186 I/O |
| Speed Grade | -2 | -2 - same | -3 - higher performance | -1 - lower performance |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial -100°C to 100°C | Industrial -100°C to 100°C | Commercial, 0°C to 85°C |
| Internal Frequency Reference | 500 MHz | 500 MHz | 500 MHz | 500 MHz |
Wichtigste Unterscheidungsmerkmale
- Commercial-temperature option for controlled environments (vs. XC6SLX25-2FTG256I)
- Balanced -2 speed grade for timing headroom (vs. XC6SLX25-1FTG256C)
- Additional speed margin without changing the PCB footprint (vs. XC6SLX25-3FTG256I)
Designhinweise
Use the official FTG256 land pattern and AMD package files as the controlling PCB references. The 256-ball BGA requires adequate escape routing for configuration, clocks, memory interfaces, and user I/O, but not every ball is a user I/O because power, ground, configuration, and dedicated function balls occupy additional positions. Keep high-speed routes short, provide continuous return paths, and account for BGA solder-mask and paste requirements in the fabrication drawings. Review differential-pair geometry and any length matching against the selected I/O standard.
Implement the core and I/O supplies as separate, properly decoupled networks according to the AMD device requirements. Place the required bulk and high-frequency capacitors close to their associated power balls, with short and low-inductance connections to the ground plane. Separate noisy or externally switched loads from sensitive FPGA rails, and check voltage sequencing during power-up and power-down. Validate current at the actual clock, utilization, I/O activity, and temperature rather than relying on a nominal device current.
Calculate junction temperature from the selected core voltage, current, activity factor, package thermal characteristics, board construction, and ambient temperature. The 500 MHz internal-frequency figure does not by itself define dissipated power because utilization and switching activity vary substantially. Spread heat through the PCB copper and maintain airflow appropriate to the enclosure. If the commercial temperature limit is reached frequently, move to the industrial -I alternative rather than relying on software calibration to compensate for excessive silicon temperature.
Separate configuration paths, clock distribution, high-speed I/O, and sensitive inputs into predictable layout regions. Use a low-noise clock source and route clocks on controlled-impedance layers, avoiding sources of jitter such as switching-power inductors and high-current return paths. Apply source-synchronous and bus timing constraints according to the selected interface, and keep the FPGA configuration interface away from noisy analog or switching sections where practical. Preserve the documented keep-out and layer-transition requirements around BGA escape routes.
Do not treat another Spartan-6 package as a drop-in replacement merely because it has the same XC6SLX25 family name. FTG256, CSG324, and FGG484 have different land patterns and ball assignments. Likewise, the -1, -2, and -3 suffixes alter performance characteristics, while C and I alter the temperature grade. Before releasing an alternate ordering code, compare the device resource mix, FTG256 ball map, supported I/O standards, power rails, configuration requirements, and timing constraints.
Compliance-Informationen
The FTG256 package is identified as lead-free in the device listing. No explicit RoHS, REACH, halogen-free, or conflict-minerals status was established for the exact ordering code.