XC6SLX9-2FT256C - 9K-LUT Spartan-6 FPGA | AMD
Teilenummer: XC6SLX9-2FT256C ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $9.5017 | $9,50 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
XC6SLX9-2FT256C Übersicht
A Spartan-6 LX FPGA is a reprogrammable integrated circuit used when fixed-function logic is insufficient or when one programmable device can consolidate multiple functions onto a compact board. The XC6SLX9 combines 9,152 logic cells and 186 I/O in the FTBGA-256 package, making it relevant to industrial control, communications, embedded instrumentation, and compact digital subsystems. Designers select pin constraints, I/O standards, clocking, memory interfaces, and timing constraints in the associated FPGA development environment before programming the device.
Verified feature data establishes the device type as an FPGA, the logic-cell count as 9,152, the I/O count as 186, and the maximum listed internal frequency as 667 MHz. The -2 suffix denotes the device speed grade, while the trailing C denotes the commercial temperature option. The package is specified as 17 mm × 17 mm, 1 mm pitch, MS-034, FTBGA-256. These facts make exact device identification essential: package outline, speed grade, temperature grade, bitstream, voltage configuration, and pin constraints must all be checked before substitution.
The target is suitable for parallel digital logic, embedded control logic, bus bridging, and application-specific signal processing where 9,152 LUT-based logic cells are sufficient. It can consolidate control and datapath logic while reducing discrete-component count, although final utility depends on memory, clock, and I/O requirements. The supplied sources do not verify RAM capacity, block-RAM count, DSP resources, supported I/O standards, power rails, or complete electrical timing tables; those specifications must be obtained from the manufacturer documentation before schematic or timing sign-off.
A critical procurement consideration is traceability. Distributor and aggregation listings identify the XC6SLX9-2FT256C, while LCSC reports an in-stock listing and a starting price of $9.5017. The Mouser and Octopart pages provide purchasing and aggregation paths, but no complete quantity-price table is present in the supplied data. Engineers should compare authorized sourcing, lot traceability, date codes, and documented lifecycle status before committing an industrial or long-lived design.
This page consolidates verified distributor specifications, package details, pricing references, and replacement screening into a design-focused record. It also distinguishes exact package-compatible family variants from unsupported assumptions, reducing the risk of treating a different Spartan-6 grade as an unconditional drop-in replacement.
Drop-in-Alternativen für XC6SLX9-2FT256C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC6SLX9-2FT256C (gleiche Bauform und Footprint) – abweichend in Package, Speed Grade, Operating Temperature, RoHS Status, Mounting Type.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
XC6SLX9-2FTG256C
✅ Drop-In✓ Auf Lager
$27.85 / Stück
Datenblatt ansehen →XC6SLX9-2FT256I
✅ Drop-In✓ Auf Lager
$23.1 / Stück
Datenblatt ansehen →XC6SLX9-2FTG256I
✅ Drop-In✓ Auf Lager
$21.75 / Stück
Datenblatt ansehen →XC6SLX9-3FTG256I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC6SLX9-2FTG256C
✅ Drop-In✓ Auf Lager
$27.85 / Stück
Datenblatt ansehen →XC6SLX9-2FT256C Grenzwerte & elektrische Eigenschaften
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Cells | 9,152 cells |
| I/O Count | 186 I/O |
| Internal Frequency | 667 MHz |
| Speed Grade | -2 |
| Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Package Type | FTBGA-256 |
| Package Dimensions | 17 mm × 17 mm |
| Package Pitch | 1 mm |
| Package Outline | MS-034 |
| Ball Count | 256 balls |
| Montageart | Surface Mount |
| Betriebstemperaturbereich | 0°C to 85°C |
| Temperature Grade | Commercial |
| Configuration | Programmable FPGA |
XC6SLX9-2FT256C ms-034 Pinbelegungsleitfaden
Pinbelegung für XC6SLX9-2FT256C (ms-034-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC6SLX9-2FT256C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC6SLX9-2FT256C ist geeignet für 7 Anwendungs: Industrial Control Logic, Communication Interface Consolidation, Embedded Data Acquisition, Programmable Signal Processing, Instrumentation and Test Systems, Secure Network Interface Bridge, Human-Machine Control Panel.
Industrial Control Logic
XC6SLX9-2FT256C fits compact industrial control logic where 9,152 programmable logic cells and 186 I/O are sufficient and the required ambient range stays within 0°C to 85°C. Designers can implement state machines, interlocks, counter logic, and peripheral coordination in one FPGA rather than a large network of fixed-function devices. The -2 speed grade and listed 667 MHz internal frequency provide useful performance headroom, but clock-domain constraints must be timed for the actual design. Because the C grade is commercial, installations with wider temperature requirements should verify environmental margins or migrate to a documented industrial option before production release.
Empfohlen
Communication Interface Consolidation
The XC6SLX9-2FT256C can consolidate protocol conversion, buffering, and test logic around external communication devices. Its 186 I/O provide a substantial interface surface for parallel buses or multiple low-speed channels, while 9,152 logic cells support framing, arbitration, checksum, and state-management functions. The listed 667 MHz internal frequency should be treated as a device-level reference, not guaranteed logic throughput; external transceiver timing and I/O timing determine the usable data rate. Engineers must constrain every clock domain and validate signal integrity at the selected board-level baud rate before release.
Empfohlen
Embedded Data Acquisition
XC6SLX9-2FT256C is suitable for acquisition-control logic that must coordinate converters, timing, digital filtering, and a host interface. The 9,152-cell device can support parallel control paths, sample counters, trigger sequencing, and data packing, subject to resource closure in the actual bitstream. The FTBGA-256 package supports dense board routing but demands careful escape routing, via-in-pad considerations, and assembly inspection. Because converter bandwidth and package pin behavior are not provided here, the design must use verified ADC or DAC timing constraints and preserve analog grounding and return paths.
Empfohlen
Programmable Signal Processing
The Spartan-6 LX XC6SLX9-2FT256C can implement digital filters, counters, waveform generation, and decision logic when a design fits within 9,152 logic cells. Its programmable architecture allows control sequences and test modes to be updated without changing the PCB, while the listed 667 MHz reference supports precisely timed synchronous logic when constraints permit. Do not assume dedicated DSP capability from the family name alone: the supplied data does not verify DSP-block count, block RAM, multiplier support, or achievable sample rate. Those resources must be confirmed in the AMD device documentation and reported by the implementation tool.
Empfohlen
Instrumentation and Test Systems
XC6SLX9-2FT256C can act as the sequencing and pattern-control core in programmable instrumentation. The 186 I/O are useful for parallel fixture control, status collection, and communication, while the programmable logic can implement measurement sequencing and self-test paths. A single programmable device also lets designers revise timing, limits, and test sequences without respinning the entire instrument. Commercial temperature suitability still limits deployments above 85°C, and fanout or high-speed fixture behavior must be analyzed with explicit input timing, drive-strength, and I/O-standard constraints.
Empfohlen
Secure Network Interface Bridge
XC6SLX9-2FT256C can bridge or supervise an embedded Ethernet interface when the required protocol logic fits its 9,152-cell budget. The Spartan-6 LX architecture can support packet buffering, status monitoring, and custom control around a companion PHY, while the -2 grade targets a consistent middle performance class. The supplied evidence does not verify Ethernet MAC, security, or packet-buffer resources inside this exact device, so integrated-MAC assumptions are not permitted. Confirm resource requirements, timing, PHY management interface behavior, and board-level isolation before using the FPGA as a drop-in network controller.
Empfohlen
Human-Machine Control Panel
XC6SLX9-2FT256C can implement display sequencing, keypad scanning, indicator control, and communication glue for a programmable human-machine interface. Its 186 I/O allow parallel display and input-device connections, while 9,152 logic cells support refresh timing, menu state, debouncing, and diagnostics. The commercial 0°C to 85°C range suits ordinary indoor equipment when the complete enclosure temperature remains within that span. Timing must be defined against the selected display interface, and any low-voltage or high-voltage display drive should use external level translation because the supplied data does not verify FPGA I/O thresholds.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC6SLX9-2FT256C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC6SLX9-2FTG256C | XC6SLX9-2FT256I | XC6SLX9-2FTG256I | XC6SLX9-3FTG256I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FTBGA-256 | 256-LBGA | FT256 family | 256-LBGA | FTBGA-256 |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Speed Grade | -2 | -2 | -2 | -2 | -3 |
| Temperature Grade | Commercial, 0°C to 85°C | Commercial, 0°C to 85°C | Industrial grade | Industrial grade | Industrial grade |
Wichtigste Unterscheidungsmerkmale
- Commercial-temperature identification (vs. XC6SLX9-2FTG256I)
- Exact FT256C ordering identity (vs. XC6SLX9-2FTG256C)
- Targeted -2 performance class (vs. XC6SLX9-3FTG256I)
Designhinweise
Do not treat a matching 256-ball count as proof of a drop-in replacement. The supplied search data includes FT and FTG package designations that require direct comparison of the AMD package files, power balls, configuration pins, I/O standards, and exposed connections. For each proposed replacement, verify the exact ordered part number, schematic, pin constraints, bitstream target, electrical limits, temperature range, and PCB footprint before releasing the substitution.
Route the FTBGA-256 device using the official MS-034 footprint and package data rather than a generic 256-ball land pattern. Preserve short, symmetric escape paths, continuous ground references, and clean power-plane partitioning. The supplied data does not verify whether exposed pads are present, so pad treatment, via-in-pad construction, solder mask, and assembly process must be checked against the exact AMD package drawing.
Verify all required supply rails, sequencing, decoupling, and I/O voltage tolerances from the manufacturer datasheet before schematic release. The verified core voltage is 1.2 V, but that value does not define auxiliary I/O supplies or bank requirements. Use manufacturer-recommended capacitance and current limits; do not infer power architecture from the distributor snippets, particularly when considering a speed-grade or package-designation change.
Constrain every input, output, and clock path against the actual board and device timing. The listed 667 MHz internal frequency is not a universal usable I/O or pipeline rate. Apply series termination only where signal-integrity analysis supports it, keep clock routing controlled, and validate configuration pins, multiplexing, and unused balls in the engineering design. Re-run timing and power analysis for every selected alternative.
Compliance-Informationen
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim is inferred from distributor availability or package type.
