AMD

XC7Z010-1CLG225C - Dual-Core Zynq-7000 SoC | AMD

Teilenummer: XC7Z010-1CLG225C ✓ Aktiv
225-CSPBGA Package 667 MHz Speed
MOQ: 1 |

XC7Z010-1CLG225C Übersicht

AMD XC7Z010-1CLG225C is a Zynq-7000 Artix-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with 28K FPGA logic cells in a 225-CSPBGA package measuring 13 x 13 mm. The processor operates at 667 MHz, while the programmable logic provides flexible hardware acceleration alongside the embedded processing system.

A Zynq-7000 system-on-chip belongs to the broader FPGA and SoC hierarchy: programmable logic operates alongside a hard processor subsystem rather than relying exclusively on soft processor cores. This integration enables software-controlled programmable hardware in a single package, reducing the need for separate processor and FPGA devices when the design requires both deterministic digital logic and an embedded operating system.

The XC7Z010-1CLG225C combines two Cortex-A9 processor cores, 28K logic cells, and CoreSight debug support. Its key characteristics are the 667 MHz maximum listed processor frequency, 28K programmable logic-cell capacity, and 225-CSPBGA package. The commercial-temperature ordering suffix, CLG225 package designation, and 13 x 13 mm package geometry make it suitable for embedded systems that require compact integration and a manageable BGA footprint.

The Zynq architecture separates the hard processing subsystem from the programmable logic array, allowing designers to allocate external interfaces, protocol handling, signal conditioning, or data acquisition functions to dedicated FPGA logic while software controls the system. This combination can reduce external interface overhead compared with a discrete processor-plus-FPGA architecture. Exact I/O counts, memory interfaces, power characteristics, and configuration details should be selected from the package-specific AMD documentation for the final design.

Typical uses include industrial control gateways, embedded vision systems, communications equipment, data-acquisition platforms, and compact edge-processing products. The dual-core Cortex-A9 subsystem is suitable for concurrent software workloads, while the Artix-7 programmable logic can implement parallel datapaths or hardware protocol handling close to external sensors and converters.

PCB implementation requires careful BGA layout, layer-stack planning, high-speed routing discipline, decoupling, and power-delivery verification. Use the AMD package pinout and board-design resources for ball assignments and escape routing, and validate the complete design for power integrity, signal integrity, thermal performance, and manufacturing yield before production.

This page organizes the exact orderable-device identity, package information, technical search queries, same-footprint ordering alternatives, application guidance, and engineering design notes into one engineering reference. It complements the manufacturer documentation with practical implementation considerations for evaluating the XC7Z010-1CLG225C in embedded Zynq-7000 designs.

Drop-in-Alternativen für XC7Z010-1CLG225C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z010-1CLG225C (gleiche Bauform und Footprint) – abweichend in FPGA Logic Cells, Package, External ADC Signal Pairs, Mounting Type, Device Type.

AMD
FPGA Logic Cells: 28,000 cells
Package: 225-CSPBGA, 13 mm x 13 mm
Mounting Type: Surface Mount
Vergleichen mit XC7Z010-1CLG225C →
AMD
FPGA Logic Cells: 28K
Package: 225-CSPBGA (13x13 mm)
External ADC Signal Pairs: 4 (differential inputs)
Vergleichen mit XC7Z010-1CLG225C →

XC7Z010-1CLG225I

✅ Drop-In ⚠️ Spezifikationen ungeprüft
AMD
📦 225-CSPBGA
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 28K · 225-CSPBGA (13x13 mm) · -40°C to +100°C (Industrial) · 1.0V · 0.95V · 1.05V

Preis auf Anfrage

Datenblatt ansehen →

XC7Z010-2CLG225C

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 225-CSPBGA
Same 225-CSPBGA footprint and commercial temperature range; -2 speed grade replaces -1, providing higher timing performance at changed power and timing margins.

📋 Referenzalternative (nicht im Katalog)

XC7Z010-2CLG225I

✅ Drop-In
📦 225-CSPBGA
Kompatible Spezifikationen

Preis auf Anfrage

XC7Z010-1CLG225E

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 225-CSPBGA
Same 225-CSPBGA footprint and -1 speed grade; extended temperature grade replaces the C version's 0 °C to 85 °C range.

📋 Referenzalternative (nicht im Katalog)

XC7Z010-2CLG225E

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 225-CSPBGA
Same 225-CSPBGA footprint; -2 speed grade and extended temperature range replace -1 performance and the commercial temperature grade.

📋 Referenzalternative (nicht im Katalog)

XC7Z010-1CLG225C Grenzwerte & elektrische Eigenschaften

Device Type Zynq-7000 Artix-7 FPGA SoC
Processor Cores 2 Arm Cortex-A9 cores
Maximum Processor Frequency 667 MHz
FPGA Logic Cells 28K cells
Debug Architecture CoreSight
Gehäuse 225-CSPBGA
Package Dimensions 13 x 13 mm
Package Pin Count 225 balls
Montageart Surface-mount BGA
Betriebstemperatur 0 °C to 85 °C
Speed Grade -1
Product Series Zynq-7000
FPGA Family Artix-7
External ADC Signal Pairs 4 differential pairs

XC7Z010-1CLG225C 225 balls Pinbelegungsleitfaden

Pinbelegung für XC7Z010-1CLG225C (225 balls-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für XC7Z010-1CLG225C im 225 balls-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z010-1CLG225C.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

XC7Z010-1CLG225C ist geeignet für 6 Anwendungs: Industrial Control Gateway, Embedded Vision and Image Processing, Communications Protocol Adapter, Data Acquisition Controller, Compact Edge Processing Node, Programmable Sensor Interface Hub.

🏭

Industrial Control Gateway

XC7Z010-1CLG225C fits industrial gateways that must coordinate networking software with deterministic local I/O. Its two Arm Cortex-A9 cores run at 667 MHz, allowing an embedded operating system and communication services to execute while the 28K Artix-7 logic cells handle protocol timing, state machines, or data filtering. The 225-CSPBGA package integrates the processor and programmable logic in a 13 x 13 mm footprint. The commercial 0 °C to 85 °C range suits controlled enclosures, but timing closure must include worst-case FPGA utilization, DDR traffic, and I/O activity.

📺

Embedded Vision and Image Processing

The XC7Z010-1CLG225C is suitable for embedded vision controllers that divide pixel handling between programmable logic and the dual-core processor. The 28K logic-cell fabric can implement parallel capture, filtering, thresholding, or interface functions, while the Cortex-A9 cores at 667 MHz manage control flow, image configuration, and higher-level decisions. Its 225-CSPBGA construction supports a compact module without separating the processor and FPGA. Designers should budget logic, memory, and bandwidth carefully because image pipelines can saturate external memory or fabric routing before the processor cores become the limiting element.

🌐

Communications Protocol Adapter

XC7Z010-1CLG225C can serve as a communications adapter where a Linux-capable processor and hardware-level protocol engine are both required. The dual 667 MHz Cortex-A9 cores can supervise configuration, diagnostics, and data exchange, while the 28K programmable logic array can accelerate framing, checksums, filtering, or low-latency packet handling. The integrated 225-CSPBGA package reduces board partitioning compared with a separate processor and FPGA. The design must verify fabric timing against every supported data rate and include isolation, reset, and recovery behavior for external links.

🧩

Data Acquisition Controller

The XC7Z010-1CLG225C is appropriate for compact data-acquisition systems that need deterministic sampling control alongside embedded processing. According to AMD technical guidance, the CLG225 XC7Z010 offers four external ADC signal pairs, which makes package selection important when comparing it with Zynq-7000 devices that expose more pairs. The programmable logic can coordinate capture, buffering, and trigger sequencing, while the Cortex-A9 cores process acquired data. The final design should verify ADC acquisition timing, memory bandwidth, channel requirements, and thermal performance together.

🖥️

Compact Edge Processing Node

XC7Z010-1CLG225C supports compact edge-processing nodes that need software flexibility and programmable hardware in one device. Two Cortex-A9 cores at 667 MHz can run network services, configuration logic, or application tasks, while the 28K Artix-7 logic fabric accelerates selected sensor, network, or signal-processing functions. The 225-CSPBGA package provides a relatively compact integration point for a small motherboard. Product designers should profile total power, provide continuous operation across the 0 °C to 85 °C commercial range, and avoid using logic-cell count alone as a substitute for complete resource and timing analysis.

🔧

Programmable Sensor Interface Hub

XC7Z010-1CLG225C can act as a programmable sensor-interface hub by combining firmware-driven configuration with hardware-level sensor handling. The dual Cortex-A9 subsystem can manage calibration, diagnostics, and device control, while the 28K logic cells can implement counters, capture logic, timing generators, or parallel sensor aggregation. Its 225-CSPBGA package combines the processor and fabric in a 13 x 13 mm device. The system designer must verify voltage compatibility, grounding, clock jitter, signal conditioning, and shutdown sequencing for every attached sensor rather than relying on device-level compatibility alone.

Zusammenfassung der empfohlenen Produkte

XC7Z010-1CLG225I AMD Verwendet in: Industrial Control Gateway, Embedded Vision and Image Processing, Data Acquisition Controller, Compact Edge Processing Node XC7Z010-2CLG225C Same-footprint higher-speed ordering variant Verwendet in: Industrial Control Gateway, Embedded Vision and Image Processing, Data Acquisition Controller XC7Z010-2CLG225I Verwendet in: Communications Protocol Adapter, Programmable Sensor Interface Hub XC7Z010-1CLG225E Same-footprint extended-temperature ordering variant Verwendet in: Communications Protocol Adapter, Programmable Sensor Interface Hub XC7Z010-2CLG225E Same-footprint faster extended-temperature option Verwendet in: Compact Edge Processing Node
What is XC7Z010-1CLG225C?
XC7Z010-1CLG225C is an AMD Zynq-7000 Artix-7 FPGA system-on-chip with two Arm Cortex-A9 processor cores, 28K logic cells, and a 225-CSPBGA package. The processor is rated at 667 MHz, and the package measures 13 x 13 mm. According to the AMD Zynq-7000 data sheet and product listing, the device integrates a hard processor subsystem and programmable Artix-7 logic in one package for embedded control and hardware-accelerated designs.
What are the key specifications of XC7Z010-1CLG225C?
The principal specifications are two Cortex-A9 processor cores, 667 MHz processor operation, 28K FPGA logic cells, CoreSight debug support, and a 225-CSPBGA package measuring 13 x 13 mm. According to the AMD product listing and Zynq-7000 documentation, the XC7Z010 is part of the Artix-7 FPGA family and combines the processor subsystem with programmable logic. Exact I/O, memory, and power parameters should be checked against the package-specific device documentation.
Where can I download the XC7Z010-1CLG225C datasheet PDF?
The official XC7Z010 and XC7Z020 Zynq-7000 data sheet is available from AMD through the AMD documentation URL listed on this page. It contains DC and AC switching specifications for the applicable Zynq-7000 devices. For the physical CLG225 pin assignments, use AMD's Zynq-7000 package pinout files and the referenced package product specification rather than relying on a generic BGA outline.
Where can I find the XC7Z010-1CLG225C pinout and package information?
Use the AMD Zynq-7000 package device pinout files for the CLG225 package, and consult UG865 for the package and pinout specification. The device uses a 225-CSPBGA package measuring 13 x 13 mm. According to AMD's technical guidance, the CLG225 XC7Z010 provides four external ADC signal pairs, which differ from the 12-pair arrangement found on other Zynq-7000 packages.
Is XC7Z010-1CLG225C suitable for embedded industrial control systems?
Yes, XC7Z010-1CLG225C is suitable for embedded industrial control systems that benefit from both a processor and programmable hardware in one device. Its dual Cortex-A9 cores support 667 MHz operation, while 28K logic cells allow time-critical control, interface, or acquisition functions to be implemented in hardware. The commercial 0 °C to 85 °C temperature range is appropriate when the enclosure does not exceed the specified ambient conditions.
How does XC7Z010-1CLG225C compare with XC7Z010-1CLG225I?
XC7Z010-1CLG225C and XC7Z010-1CLG225I use the same 225-CSPBGA footprint and -1 speed grade, but their temperature grades differ. The C suffix denotes the commercial 0 °C to 85 °C range, while the I suffix denotes the industrial temperature option. According to AMD ordering information, the I version is the appropriate choice when operation beyond the commercial temperature range is required.
When should I choose XC7Z010-1CLG225C over XC7Z010-2CLG225I?
Choose XC7Z010-1CLG225C when its 667 MHz processor rating and 0 °C to 85 °C commercial temperature range satisfy the design. Choose XC7Z010-2CLG225I when a faster speed grade and industrial temperature range are required. Both use the 225-CSPBGA package, so the PCB land pattern can remain compatible, but power, timing, thermal, and firmware validation must cover the selected ordering code.
Is XC7Z010-1CLG225I a drop-in replacement for XC7Z010-1CLG225C?
XC7Z010-1CLG225I is a same-package, pin-compatible alternative for XC7Z010-1CLG225C because both use the 225-CSPBGA footprint and -1 speed grade. Its primary difference is the industrial temperature rating, which is broader than the C version's 0 °C to 85 °C range. The higher-grade device may also change operating power and temperature-dependent margins, so those conditions should be revalidated for automotive, industrial, or extended-temperature systems.
What is the best drop-in replacement for XC7Z010-1CLG225C?
XC7Z010-1CLG225I is the closest temperature-grade drop-in option because it retains the -1 speed grade and 225-CSPBGA package. XC7Z010-2CLG225I is another same-footprint alternative with a faster -2 speed grade and industrial temperature range. No cross-manufacturer device has been established as a pin-compatible replacement, so an FPGA SoC from another supplier should not be treated as a drop-in substitute without a complete package, pin, tool, and firmware review.
Is there a cross-brand equivalent for XC7Z010-1CLG225C?
No verified cross-brand pin-compatible equivalent has been identified for the XC7Z010-1CLG225C. The AMD XC7Z010 CLG225 ordering variants are the appropriate same-footprint choices because they preserve the Zynq device architecture, package assignment, and software ecosystem. A device from another manufacturer may provide similar embedded processing, but it is not a drop-in replacement unless the package balls, power rails, configuration method, and toolchain are demonstrably compatible.
Can XC7Z010-1CLG225C replace XC7Z010-2CLG225I?
The XC7Z010-1CLG225C shares the 225-CSPBGA package with XC7Z010-2CLG225I, but it is not the preferred choice for designs that rely on -2 timing performance or industrial temperature operation. The -1 grade is rated at 667 MHz, versus the higher timing capability associated with the -2 grade. According to AMD's ordering scheme, selecting the -1 commercial device can reduce timing margin and exclude temperatures outside 0 °C to 85 °C.
What is the price of XC7Z010-1CLG225C?
The current unit price is not published statically on this page because XC7Z010-1CLG225C pricing and inventory can change by quantity and order status. Use the Request a Quote form on this page for the current price, available quantity, and order confirmation. This route provides a transaction-specific response for the exact XC7Z010-1CLG225C order code and its 225-CSPBGA package.
Where can I buy XC7Z010-1CLG225C with current stock and lead time?
Request current XC7Z010-1CLG225C stock, minimum order quantity, and lead time through the Request a Quote form on this page. The exact order code is important because Zynq-7000 devices are differentiated by speed grade, temperature grade, and package suffix. The form should be completed with the required 225-CSPBGA package, quantity, delivery location, and target schedule so the quotation reflects the intended configuration.
Is XC7Z010-1CLG225C in stock?
Stock status should be confirmed through the Request a Quote form on this page because availability can change between quote requests. The XC7Z010-1CLG225C is an orderable 225-CSPBGA configuration with a -1 speed grade and commercial temperature range. Include the required quantity and production schedule in the request so the manufacturing and fulfillment response is tied to the exact device configuration.
What design work is required for a 225-CSPBGA XC7Z010-1CLG225C PCB?
A 225-CSPBGA PCB requires controlled escape routing, a suitable layer stack, via-in-pad or via-transition design, high-speed impedance management, and a power-distribution network that meets the device's simultaneous switching requirements. According to AMD's Zynq-7000 package resources, engineers should use UG865 and the package pinout files to assign every ball. Signal-integrity, power-integrity, thermal, and assembly simulations should be completed before fabrication.

Technische Referenzdaten für XC7Z010-1CLG225C – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose XC7Z010-1CLG225C when the design requires the smallest Zynq-7000 XC7Z010 CLG225 option with two 667 MHz Cortex-A9 cores, 28K logic cells, and operation from 0 °C to 85 °C. Choose XC7Z010-1CLG225I when the same -1 speed and 225-CSPBGA footprint must operate in an industrial temperature environment. Choose XC7Z010-1CLG225E when the system needs the extended-temperature ordering grade. Select XC7Z010-2CLG225C or XC7Z010-2CLG225I when -2 timing performance is needed, then revalidate power, signal timing, and thermal margins. All listed alternatives use the same CLG225 package, but their temperature and speed characteristics are not interchangeable. No cross-manufacturer drop-in equivalent is established, so migration outside the AMD family requires a full mechanical, electrical, toolchain, and software review.

Vergleich mit Alternativen

Parameter Dieses Produkt XC7Z010-1CLG225I XC7Z010-2CLG225C XC7Z010-2CLG225I XC7Z010-1CLG225E XC7Z010-2CLG225E
Package 225-CSPBGA (13 x 13 mm) 225-CSPBGA 225-CSPBGA 225-CSPBGA 225-CSPBGA 225-CSPBGA
Brand AMD AMD AMD AMD AMD AMD
Processor Cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores
FPGA Logic Cells 28K cells 28K cells 28K cells 28K cells 28K cells 28K cells
Speed Grade -1 -1 -2 -2 -1 -2
Temperature Grade Commercial, 0 °C to 85 °C Industrial Commercial, 0 °C to 85 °C Industrial Extended Extended
Package Dimensions 13 x 13 mm 13 x 13 mm 13 x 13 mm 13 x 13 mm 13 x 13 mm 13 x 13 mm
External ADC Signal Pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

Wichtigste Unterscheidungsmerkmale

  • Integrated processor and programmable logic (vs. XC7Z010-1CLG225I)
  • Commercial temperature coverage matches controlled indoor deployments (vs. XC7Z010-1CLG225E)
  • Identical CLG225 land pattern enables ordering-code migration (vs. XC7Z010-2CLG225I)

Designhinweise

Use the AMD CLG225 package pinout files and UG865 to establish the exact ball assignments before routing. The 225-CSPBGA package measures 13 x 13 mm and needs deliberate escape-routing, via-transition, and layer-stack planning. Do not infer the target package from the Zynq-7000 family alone because CLG225, CLG400, and other packages have different ball counts and device-specific assignments. Validate every power, ground, configuration, clock, and high-speed signal against the ordering-code-specific package data.

Design the power tree for worst-case processor and FPGA activity rather than nominal control-state current. Include separate filtering and local decoupling paths for each supply rail, verify sequencing against the device requirements, and model voltage droop during simultaneous fabric switching and memory traffic. The 667 MHz processor rating does not by itself define total power. Actual dissipation depends on voltage, utilization, clock activity, memory access, I/O loading, temperature, and the selected -1 or -2 speed grade.

Model junction temperature from the final board, enclosure, airflow, and populated-component configuration. The XC7Z010-1CLG225C is specified for a 0 °C to 85 °C commercial range, leaving no temperature margin outside that interval. Use the package thermal model and power-consumption estimates from the AMD tools for the actual design. Check both steady-state operation and transient processor or logic activity, especially in sealed industrial enclosures with limited convection.

Treat configuration, memory, clock, serial, and parallel fabric interfaces as a complete constraint set. Route clocks as controlled-length structures, use suitable termination and topology, account for package and board loss, and simulate the stack-up before fabrication. For external data acquisition, the CLG225 XC7Z010 provides four ADC signal pairs, so channel-count assumptions from other Zynq-7000 packages must not be carried over without checking the package-specific pinout.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The XC7Z010-1CLG225C is an industrial and commercial FPGA SoC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from AMD for the exact order code.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

xc7z010 1clg225c xc7z010 1clg225c datasheet xc7z010 datasheet xc7z010 1clg400c xc7z010 1clg400i xc7z010 2clg400i xc7z010 1clg225i xc7z010 1clg400c datasheet xc7z010 2clg225i xc7z010 1clg400i datasheet XC7Z010-1CLG225C pinout XC7Z010-1CLG225C equivalent XC7Z010-1CLG225C replacement XC7Z010-1CLG225C price

Verwandte Bauteile & Begriffe

AMD XC7Z010-1CLG225C XC7Z010 Zynq-7000 Artix-7 FPGA system-on-chip FPGA SoC programmable logic Arm Cortex-A9 dual-core processor MPCore CoreSight 28K logic cells 667 MHz 225-CSPBGA BGA surface mount four external ADC signal pairs industrial control embedded vision communications data acquisition edge processing UG865
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen