XC7Z010-1CLG225C - Dual-Core Zynq-7000 SoC | AMD
MPN: XC7Z010-1CLG225C ✓ فعالXC7Z010-1CLG225C نمای کلی
A Zynq-7000 system-on-chip belongs to the broader FPGA and SoC hierarchy: programmable logic operates alongside a hard processor subsystem rather than relying exclusively on soft processor cores. This integration enables software-controlled programmable hardware in a single package, reducing the need for separate processor and FPGA devices when the design requires both deterministic digital logic and an embedded operating system.
The XC7Z010-1CLG225C combines two Cortex-A9 processor cores, 28K logic cells, and CoreSight debug support. Its key characteristics are the 667 MHz maximum listed processor frequency, 28K programmable logic-cell capacity, and 225-CSPBGA package. The commercial-temperature ordering suffix, CLG225 package designation, and 13 x 13 mm package geometry make it suitable for embedded systems that require compact integration and a manageable BGA footprint.
The Zynq architecture separates the hard processing subsystem from the programmable logic array, allowing designers to allocate external interfaces, protocol handling, signal conditioning, or data acquisition functions to dedicated FPGA logic while software controls the system. This combination can reduce external interface overhead compared with a discrete processor-plus-FPGA architecture. Exact I/O counts, memory interfaces, power characteristics, and configuration details should be selected from the package-specific AMD documentation for the final design.
Typical uses include industrial control gateways, embedded vision systems, communications equipment, data-acquisition platforms, and compact edge-processing products. The dual-core Cortex-A9 subsystem is suitable for concurrent software workloads, while the Artix-7 programmable logic can implement parallel datapaths or hardware protocol handling close to external sensors and converters.
PCB implementation requires careful BGA layout, layer-stack planning, high-speed routing discipline, decoupling, and power-delivery verification. Use the AMD package pinout and board-design resources for ball assignments and escape routing, and validate the complete design for power integrity, signal integrity, thermal performance, and manufacturing yield before production.
This page organizes the exact orderable-device identity, package information, technical search queries, same-footprint ordering alternatives, application guidance, and engineering design notes into one engineering reference. It complements the manufacturer documentation with practical implementation considerations for evaluating the XC7Z010-1CLG225C in embedded Zynq-7000 designs.
جایگزینهای drop-in برای XC7Z010-1CLG225C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC7Z010-1CLG225C (همان فرمفاکتور و فوتپرینت) — متفاوت در FPGA Logic Cells, Package, External ADC Signal Pairs, Mounting Type, Device Type.
XC7Z010-1CLG225I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7Z010-2CLG225C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC7Z010-1CLG225E
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC7Z010-2CLG225E
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC7Z010-1CLG225C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Zynq-7000 Artix-7 FPGA SoC |
| Processor Cores | 2 Arm Cortex-A9 cores |
| Maximum Processor Frequency | 667 MHz |
| FPGA Logic Cells | 28K cells |
| Debug Architecture | CoreSight |
| بستهبندی | 225-CSPBGA |
| Package Dimensions | 13 x 13 mm |
| Package Pin Count | 225 balls |
| نوع نصب | Surface-mount BGA |
| دمای کاری | 0 °C to 85 °C |
| Speed Grade | -1 |
| Product Series | Zynq-7000 |
| FPGA Family | Artix-7 |
| External ADC Signal Pairs | 4 differential pairs |
راهنمای پیکربندی پین XC7Z010-1CLG225C 225 balls
پیکربندی پین برای XC7Z010-1CLG225C (پکیج 225 balls). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC7Z010-1CLG225C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC7Z010-1CLG225C مناسب است برای 6 کاربردs: Industrial Control Gateway, Embedded Vision and Image Processing, Communications Protocol Adapter, Data Acquisition Controller, Compact Edge Processing Node, Programmable Sensor Interface Hub.
Industrial Control Gateway
XC7Z010-1CLG225C fits industrial gateways that must coordinate networking software with deterministic local I/O. Its two Arm Cortex-A9 cores run at 667 MHz, allowing an embedded operating system and communication services to execute while the 28K Artix-7 logic cells handle protocol timing, state machines, or data filtering. The 225-CSPBGA package integrates the processor and programmable logic in a 13 x 13 mm footprint. The commercial 0 °C to 85 °C range suits controlled enclosures, but timing closure must include worst-case FPGA utilization, DDR traffic, and I/O activity.
پیشنهادی
Embedded Vision and Image Processing
The XC7Z010-1CLG225C is suitable for embedded vision controllers that divide pixel handling between programmable logic and the dual-core processor. The 28K logic-cell fabric can implement parallel capture, filtering, thresholding, or interface functions, while the Cortex-A9 cores at 667 MHz manage control flow, image configuration, and higher-level decisions. Its 225-CSPBGA construction supports a compact module without separating the processor and FPGA. Designers should budget logic, memory, and bandwidth carefully because image pipelines can saturate external memory or fabric routing before the processor cores become the limiting element.
پیشنهادی
Communications Protocol Adapter
XC7Z010-1CLG225C can serve as a communications adapter where a Linux-capable processor and hardware-level protocol engine are both required. The dual 667 MHz Cortex-A9 cores can supervise configuration, diagnostics, and data exchange, while the 28K programmable logic array can accelerate framing, checksums, filtering, or low-latency packet handling. The integrated 225-CSPBGA package reduces board partitioning compared with a separate processor and FPGA. The design must verify fabric timing against every supported data rate and include isolation, reset, and recovery behavior for external links.
پیشنهادی
Data Acquisition Controller
The XC7Z010-1CLG225C is appropriate for compact data-acquisition systems that need deterministic sampling control alongside embedded processing. According to AMD technical guidance, the CLG225 XC7Z010 offers four external ADC signal pairs, which makes package selection important when comparing it with Zynq-7000 devices that expose more pairs. The programmable logic can coordinate capture, buffering, and trigger sequencing, while the Cortex-A9 cores process acquired data. The final design should verify ADC acquisition timing, memory bandwidth, channel requirements, and thermal performance together.
پیشنهادی
Compact Edge Processing Node
XC7Z010-1CLG225C supports compact edge-processing nodes that need software flexibility and programmable hardware in one device. Two Cortex-A9 cores at 667 MHz can run network services, configuration logic, or application tasks, while the 28K Artix-7 logic fabric accelerates selected sensor, network, or signal-processing functions. The 225-CSPBGA package provides a relatively compact integration point for a small motherboard. Product designers should profile total power, provide continuous operation across the 0 °C to 85 °C commercial range, and avoid using logic-cell count alone as a substitute for complete resource and timing analysis.
پیشنهادی
Programmable Sensor Interface Hub
XC7Z010-1CLG225C can act as a programmable sensor-interface hub by combining firmware-driven configuration with hardware-level sensor handling. The dual Cortex-A9 subsystem can manage calibration, diagnostics, and device control, while the 28K logic cells can implement counters, capture logic, timing generators, or parallel sensor aggregation. Its 225-CSPBGA package combines the processor and fabric in a 13 x 13 mm device. The system designer must verify voltage compatibility, grounding, clock jitter, signal conditioning, and shutdown sequencing for every attached sensor rather than relying on device-level compatibility alone.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC7Z010-1CLG225C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC7Z010-1CLG225I | XC7Z010-2CLG225C | XC7Z010-2CLG225I | XC7Z010-1CLG225E | XC7Z010-2CLG225E |
|---|---|---|---|---|---|---|
| Package | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA | 225-CSPBGA | 225-CSPBGA | 225-CSPBGA | 225-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores |
| FPGA Logic Cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells |
| Speed Grade | -1 | -1 | -2 | -2 | -1 | -2 |
| Temperature Grade | Commercial, 0 °C to 85 °C | Industrial | Commercial, 0 °C to 85 °C | Industrial | Extended | Extended |
| Package Dimensions | 13 x 13 mm | 13 x 13 mm | 13 x 13 mm | 13 x 13 mm | 13 x 13 mm | 13 x 13 mm |
| External ADC Signal Pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
تفاوتهای کلیدی
- Integrated processor and programmable logic (در مقابلXC7Z010-1CLG225I)
- Commercial temperature coverage matches controlled indoor deployments (در مقابلXC7Z010-1CLG225E)
- Identical CLG225 land pattern enables ordering-code migration (در مقابلXC7Z010-2CLG225I)
یادداشتهای طراحی
Use the AMD CLG225 package pinout files and UG865 to establish the exact ball assignments before routing. The 225-CSPBGA package measures 13 x 13 mm and needs deliberate escape-routing, via-transition, and layer-stack planning. Do not infer the target package from the Zynq-7000 family alone because CLG225, CLG400, and other packages have different ball counts and device-specific assignments. Validate every power, ground, configuration, clock, and high-speed signal against the ordering-code-specific package data.
Design the power tree for worst-case processor and FPGA activity rather than nominal control-state current. Include separate filtering and local decoupling paths for each supply rail, verify sequencing against the device requirements, and model voltage droop during simultaneous fabric switching and memory traffic. The 667 MHz processor rating does not by itself define total power. Actual dissipation depends on voltage, utilization, clock activity, memory access, I/O loading, temperature, and the selected -1 or -2 speed grade.
Model junction temperature from the final board, enclosure, airflow, and populated-component configuration. The XC7Z010-1CLG225C is specified for a 0 °C to 85 °C commercial range, leaving no temperature margin outside that interval. Use the package thermal model and power-consumption estimates from the AMD tools for the actual design. Check both steady-state operation and transient processor or logic activity, especially in sealed industrial enclosures with limited convection.
Treat configuration, memory, clock, serial, and parallel fabric interfaces as a complete constraint set. Route clocks as controlled-length structures, use suitable termination and topology, account for package and board loss, and simulate the stack-up before fabrication. For external data acquisition, the CLG225 XC7Z010 provides four ADC signal pairs, so channel-count assumptions from other Zynq-7000 packages must not be carried over without checking the package-specific pinout.
اطلاعات انطباق
The XC7Z010-1CLG225C is an industrial and commercial FPGA SoC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from AMD for the exact order code.