XC7Z020-3CLG400E - Dual Cortex-A9 Zynq-7000 SoC | AMD
Teilenummer: XC7Z020-3CLG400E ✓ AktivXC7Z020-3CLG400E Übersicht
A Zynq-7000 SoC is an adaptive SoC in which an ARM-compatible processor system and programmable logic share a common silicon device. This integration places application processing, programmable hardware acceleration, high-speed I/O, and development instrumentation within one package. Compared with a discrete processor and FPGA arrangement, the integrated architecture can reduce board-level interconnects and provide a unified hardware/software design flow for embedded processing applications.
The XC7Z020-3CLG400E includes two ARM Cortex-A9 processor cores with CoreSight debug support, an 85K-logic-cell Artix-7 FPGA fabric, and a 400-pin CSPBGA package. Its listed maximum processor frequency is 866 MHz. The device supports 32-bit Thumb-2 processing and is associated with 1.2 V and 3.3 V supply domains. These characteristics position it for control, communications, image-processing, and embedded systems requiring both software algorithms and programmable logic.
The processor subsystem executes operating-system and application software, while the FPGA fabric implements parallel datapaths, custom interfaces, protocol handling, or hardware accelerators. CoreSight adds hardware-assisted debug visibility to the processor system. For board designers, the principal integration challenge is the dense 400-ball BGA escape routing and separation of sensitive power, clock, and interface nets. A pin-compatible speed-grade alternative can simplify component qualification when its operating conditions and ordering information meet the system requirements.
Typical applications include industrial automation, embedded vision, communications gateways, instrumentation, and mixed software-and-hardware control systems. The dual Cortex-A9 configuration supports concurrent software tasks, while the FPGA fabric can implement time-critical operations or custom peripherals. In a camera-based system, for example, programmable logic could acquire and pre-process image data while the processor performs higher-level control and communication.
When replacing this device, verify the complete package drawing, power architecture, exposed-pad requirements, configuration memory interface, clocking, and supported processor speed grade. Package pin compatibility alone does not establish identical operating limits. The AMD Zynq-7000 package and pinout files should be used to confirm every ball assignment before releasing a substitute to manufacturing.
This page combines exact device identity, package details, speed-grade comparisons, replacement guidance, and design considerations in a compact engineering format. It helps engineers distinguish a true board-compatible option from a merely similar Zynq device while emphasizing the checks required for reliable BGA layout, power delivery, programming, and production assembly.
Drop-in-Alternativen für XC7Z020-3CLG400E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z020-3CLG400E (gleiche Bauform und Footprint) – abweichend in Device Type, FPGA Family, Maximum Processor Frequency, Package Dimensions, Package Type.
XC7Z020-2CLG400E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z020-2CLG400I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z020-1CLG400I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z020-1CLG400C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z020-2CLG484I
✅ Drop-In✗ Nicht auf Lager
$49 / Stück
Datenblatt ansehen →XC7Z020-3CLG400E Grenzwerte & elektrische Eigenschaften
| Device Type | Zynq-7000 adaptive system-on-chip with Arm Cortex-A9 processor and Artix-7 FPGA |
| Processor Cores | 2 Arm Cortex-A9 MPCore cores |
| Maximum Processor Frequency | 866 MHz |
| Processor Instruction Set | 32-bit Thumb-2 |
| FPGA Logic Cells | 85K logic cells |
| FPGA Family | Artix-7 |
| Debug Capability | CoreSight |
| SoC Architecture | Zynq-7000 adaptive SoC |
| Performance Grade | -3 speed grade |
| Package Type | 400-pin CS-BGA |
| Package Dimensions | 17 x 17 mm |
| Number of Package Balls | 400 balls |
| Versorgungsspannung | 1.2 V and 3.3 V |
| Montageart | Surface mount |
XC7Z020-3CLG400E 400 balls Pinbelegungsleitfaden
Pinbelegung für XC7Z020-3CLG400E (400 balls-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z020-3CLG400E.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z020-3CLG400E ist geeignet für 6 Anwendungs: Industrial Automation Controller, Embedded Vision Processing, Communications Gateway, Programmable Logic Test System, Medical Instrument Controller, Aerospace Ground Equipment.
Industrial Automation Controller
The XC7Z020-3CLG400E fits industrial automation controllers that combine a real-time operating system with programmable hardware. Its two Arm Cortex-A9 cores operate up to 866 MHz and can execute control logic, communications, diagnostics, and supervisory software, while the 85K-logic-cell Artix-7 fabric can accelerate timing-sensitive I/O or implement custom interfaces. The integrated architecture reduces inter-device communication between the processor and programmable logic. The main design constraint is the dense 400-ball, 17 x 17 mm CS-BGA package, which requires careful escape routing, layer planning, and power-plane segmentation.
Empfohlen
Embedded Vision Processing
The XC7Z020-3CLG400E is suitable for embedded vision nodes where image acquisition, preprocessing, and higher-level processing must share a compact hardware platform. Programmable logic can perform deterministic pixel transport, thresholding, or data-format conversion close to the camera interface, while the dual 866 MHz Cortex-A9 cores run recognition, control, and networking tasks. The 85K logic-cell fabric allows hardware-specific functions to coexist with software rather than forcing all processing onto the CPU. Its 400-ball BGA package demands strict high-speed layout discipline and compact power delivery, making signal-integrity simulation and assembly-process capability important.
Empfohlen
Communications Gateway
The XC7Z020-3CLG400E can serve in a communications gateway that must combine protocol software, packet processing, and custom hardware interfaces. The dual Cortex-A9 configuration supports operating-system workloads, management functions, encryption stacks, and network applications, while the Artix-7 fabric can implement time-critical framing, serialization, or data-rate adaptation. Operating up to 866 MHz provides additional headroom for concurrent software tasks. A design tradeoff is that the processor, programmable logic, memory interface, and high-speed I/O share the same 17 x 17 mm package, so every layer transition and power rail must be planned carefully.
Empfohlen
Programmable Logic Test System
The XC7Z020-3CLG400E is appropriate for programmable-logic test and instrumentation systems that need flexible hardware timing plus a Linux or real-time software environment. The FPGA fabric can implement custom stimulus generation, capture logic, protocol analyzers, or trigger systems, while the dual Cortex-A9 cores handle instrument control, analysis, and remote management. Its 85K logic cells provide moderate parallel-processing capacity, and the 866 MHz processor supports application-level workloads without a separate processor. The 400-ball package is less forgiving than a leaded package, so board simulation, fine-pitch assembly inspection, and thermal analysis should be included before volume production.
Empfohlen
Medical Instrument Controller
The XC7Z020-3CLG400E can support a medical instrument controller when the design needs deterministic acquisition hardware alongside higher-level application processing. Programmable logic can manage sensor timing, sampling, filtering, and data capture, while the two 866 MHz Cortex-A9 cores execute control, user-interface, data-processing, and communications software. This division of labor can isolate time-critical behavior from the operating system. Because medical designs often require extended lifecycle planning and formal risk controls, engineers should validate the selected ordering suffix, operating-temperature grade, documentation package, and production-change process rather than relying only on footprint similarity.
Empfohlen
Aerospace Ground Equipment
The XC7Z020-3CLG400E is suitable for aerospace ground-support equipment requiring adaptable logic and embedded processing without a separate processor package. The FPGA fabric can implement telemetry capture, interface conversion, timing generation, or fault monitoring, while the dual Cortex-A9 cores run configuration management, logging, and communications. The 866 MHz maximum frequency supports responsive control and analysis workloads, and the 85K-cell fabric accommodates moderate parallel logic. For flight-adjacent or safety-sensitive ground equipment, the exact grade suffix, temperature range, radiation assumptions, and qualification requirements must be reviewed separately from ordinary commercial qualification.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z020-3CLG400E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z020-2CLG400E | XC7Z020-2CLG400I | XC7Z020-1CLG400I | XC7Z020-1CLG400C | XC7Z020-2CLG484I |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17x17 mm) | 400-CSPBGA (17x17 mm) | 400-CSPBGA (17x17 mm) | 400-CSPBGA (17x17 mm) | 400-CSPBGA (17x17 mm) | 484-ball package code; compatibility requires confirmation |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC |
| Performance Grade | -3 | -2, one grade below target | -2, one grade below target | -1, two grades below target | -1, two grades below target | -2, one grade below target |
| Temperature Grade | E | E | I | I | C | I |
Wichtigste Unterscheidungsmerkmale
- Higher processor speed grade (vs. XC7Z020-2CLG400E)
- Higher grade with the same CLG400 organization (vs. XC7Z020-1CLG400I)
- Commercial E-grade temperature suffix (vs. XC7Z020-2CLG400I)
- Highest processor grade among the listed XC7Z020 candidates (vs. XC7Z020-1CLG400C)
Designhinweise
Treat the 400-ball, 17 x 17 mm CS-BGA as a fine-pitch routing problem from the first schematic stage. Use AMD's CLG400 package data to assign every ball, preserve the prescribed footprint geometry, and plan layer transitions before placement. Provide adequate fanout from the fine-pitch array, maintain continuous return paths below high-speed nets, and reserve assembly and inspection features in accordance with the approved package drawing.
Implement the 1.2 V and 3.3 V domains with the decoupling, sequencing, and current-capacity requirements specified by AMD. Keep the processor and programmable-logic supply paths within their required noise and transient limits. Review the assembled board at the intended processor frequency and logic activity because static current estimates alone do not represent worst-case switching and I/O loading. Validate the final power network for voltage droop and coupling across all layers.
Separate high-speed memory, configuration, clock, and serial interfaces from sensitive control and reference paths. Match clock distribution through symmetric routing, minimize stub lengths, and use the reference-design connection and decoupling practices for memory interfaces. Avoid crossing split power or ground planes under signal paths, particularly in the dense area beneath the BGA. Run signal-integrity and power-integrity simulations with actual stackup, material properties, connector and via data, and realistic traffic patterns.
Do not treat a shared CLG400 family designation as proof that every ordering suffix is interchangeable. Confirm the performance grade, temperature grade, device density, package drawing, ball assignments, power limits, configuration method, and software-device identifier. The XC7Z020-2CLG484I candidate is especially important to review because its package code differs from CLG400; use the manufacturer package files to verify mechanical and electrical compatibility before calling it a drop-in replacement.
Compliance-Informationen
The available product information includes a RoHS reference for this catalog item but does not provide complete compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals reporting.