XC7Z030-1FBG676C - 667MHz Dual Cortex-A9 Zynq SoC | AMD
Teilenummer: XC7Z030-1FBG676C ✓ AktivXC7Z030-1FBG676C Übersicht
A Zynq system-on-chip is an adaptive SoC architecture that joins a hardwired ARM processing system with programmable FPGA fabric. It belongs to the FPGA and CPLD category, extending beyond a conventional FPGA by allowing operating-system-level software and hardware pipelines to coexist on one device. This combination supports high compute density, deterministic hardware-assisted processing, and flexible peripheral integration without using two separate large packages.
The XC7Z030 provides 2.5 DMIPS/MHz per CPU, coherent multiprocessor operation, ARMv7-A support, and TrustZone security. Its programmable side contains 125K logic cells, 130 user I/Os, and the general-purpose resources associated with the Kintex-7 FPGA architecture. The -1 speed grade is identified for commercial-temperature operation from 0°C to 85°C. Device configuration includes secure boot support, memory interfaces, programmable I/O, and dedicated processing resources for signal-processing workloads.
The integrated ARM Cortex-A9 subsystem executes control software, networking functions, or an operating system, while the Kintex-7 fabric accelerates data movement and computation. Up to 1 GHz is listed for related device documentation, but the exact XC7Z030-1FBG676C ordering information identifies its maximum CPU frequency as 667 MHz. Designers should use the device-specific operating limits rather than apply a family-wide frequency figure to this speed grade. The CoreSight architecture also provides visibility into processor activity and supports hardware-assisted debugging.
Typical uses include industrial control systems, telecom equipment, embedded vision, network appliances, test and measurement platforms, and software-defined radio. The ARM processor is appropriate for protocol handling and supervisory control, while FPGA fabric can implement parallel pipelines, custom interfaces, DSP functions, or hardware accelerators. This partition reduces external component count and allows data to pass between software and programmable logic through dedicated AXI interfaces.
The primary PCB constraint is the 676-ball FCBGA footprint. Its fine pitch requires careful escape routing, multilayer construction, controlled impedance, via-in-pad or buried-via strategies where necessary, and assembly processes designed for the package pitch. Designers should use the AMD package placement diagram and pinout files to assign every power, ground, configuration, processor, and I/O ball before layout.
This product page combines the exact ordering characteristics, package identity, searchable replacement information, and application-oriented guidance in one engineering reference. It also distinguishes verified same-package Zynq options from broader functional alternatives that require hardware and software validation before reuse on an existing board.
Drop-in-Alternativen für XC7Z030-1FBG676C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7Z030-1FBG676C (gleiche Bauform und Footprint) – abweichend in Device Type, Package Type, Mounting Type, Speed Grade, Process Technology.
XC7Z030-1FBG676I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-2FBG676C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z030-3FBG676C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC7Z035-1FBG676C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z045-1FBG676C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7Z030-1FBG676C Grenzwerte & elektrische Eigenschaften
| Device Type | Zynq-7000 FPGA SoC with ARM Cortex-A9 processor |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Processor Architecture | ARMv7-A |
| Maximum CPU Frequency | 667 MHz |
| Processor Performance | 2.5 DMIPS/MHz per CPU |
| Programmable Logic | 125K Kintex-7 logic cells |
| User I/O Count | 130 I/Os |
| Multiprocessor Support | Coherent multiprocessor support |
| Security Feature | ARM TrustZone security |
| Debug Architecture | CoreSight |
| Gehäuse | 676-ball FCBGA, 27 mm x 27 mm |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| Betriebstemperatur | 0°C to 85°C |
| Montageart | Surface mount |
| Process Technology | 28 nm |
| Media Processing Engine | ARM NEON single and double precision vector floating-point support |
| Trusted Execution Environment | ARM Jazelle RCT |
| Instruction Set | ARMv7-A with Thumb-2 |
XC7Z030-1FBG676C 676-ball fcbga, 27 mm x 27 mm Pinbelegungsleitfaden
Pinbelegung für XC7Z030-1FBG676C (676-ball fcbga, 27 mm x 27 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7Z030-1FBG676C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7Z030-1FBG676C ist geeignet für 6 Anwendungs: Industrial Control and Automation, Telecom and Network Equipment, Software-Defined Radio, Embedded Vision and Image Processing, Test and Measurement Equipment, Aerospace and Defense Control Systems.
Industrial Control and Automation
The AMD XC7Z030-1FBG676C fits industrial controllers that divide supervisory work from deterministic hardware tasks. The dual ARM Cortex-A9 cores can run operating-system software, communications protocols, and machine-control logic at up to 667 MHz, while the 125K-cell FPGA fabric can accelerate signal acquisition, timing functions, and custom I/O. With 130 user I/Os, the device can consolidate interfaces that would otherwise require separate programmable logic. Its commercial 0°C to 85°C range suits enclosure designs whose worst-case ambient remains inside that limit. The principal design consideration is validating the complete industrial I/O, isolation, power, and functional-safety strategy rather than treating the processor and fabric as independent blocks.
Empfohlen
Telecom and Network Equipment
The XC7Z030-1FBG676C is suitable for packet-processing, control-plane, and line-card functions where software flexibility must coexist with high-throughput hardware. The ARM Cortex-A9 subsystem handles protocol state, configuration, and management, while the Kintex-7 fabric can implement parallel datapaths or hardware-assisted packet processing. The 125K logic-cell and 130-I/O resources allow a compact module to combine compute and custom interfaces. The 667 MHz processor rating provides a defined baseline for software partitioning, while CoreSight assists with complex system debugging. For telecommunications equipment, designers must still budget separate clocking, transceiver, power, and channel-impairment requirements rather than expecting the SoC to implement every physical-layer function by itself.
Empfohlen
Software-Defined Radio
The AMD XC7Z030-1FBG676C can support software-defined radio architectures by placing DSP, filtering, and interface pipelines in programmable logic while the ARM cores manage control software and data movement. The Kintex-7 fabric offers 125K logic cells for parallel processing stages, and the dual Cortex-A9 processors provide a platform for protocol handling and supervisory functions. The 130-I/O capability can connect custom converters, clocking devices, and data converters in a tightly integrated module. Designers should partition functions according to deterministic latency and throughput rather than moving every operation into software, and must verify the selected external transceiver, converters, and RF clocking network independently of the SoC’s processing resources.
Empfohlen
Embedded Vision and Image Processing
The XC7Z030-1FBG676C can divide an embedded vision system between deterministic pixel pipelines in programmable logic and higher-level processing in the dual-core ARM subsystem. FPGA logic is useful for preprocessing, filtering, and camera-interface adaptation, while the Cortex-A9 cores can execute control, image-management, and communications tasks. The 125K logic-cell budget and 130 I/Os provide a compact implementation base for systems needing multiple sensor or display interfaces. The 667 MHz CPU frequency should be included in software-performance planning, especially for image allocation and memory bandwidth. MIPI or other camera interfaces still require their own electrical and timing implementation, and production designs should test image throughput under realistic memory traffic and thermal conditions.
Empfohlen
Test and Measurement Equipment
The XC7Z030-1FBG676C is appropriate for modular test and measurement equipment that requires flexible acquisition, timing, or stimulus logic alongside a control processor. Its programmable-logic fabric can implement high-speed sampling paths or instrument-specific digital functions, while the dual ARM Cortex-A9 cores manage calibration, user interfaces, data analysis, and remote control. CoreSight visibility helps isolate processor-side faults, and the 130-I/O count supports connections to test fixtures and control peripherals. The device does not replace analog front-end design; those functions require appropriate converters, amplifiers, and clocking circuits. Its commercial temperature range and the 27 mm by 27 mm FCBGA thermal characteristics must be evaluated against the airflow and temperature rise inside laboratory or field equipment.
Empfohlen
Aerospace and Defense Control Systems
The XC7Z030-1FBG676C can support digital control subsystems where a processor and programmable logic must coexist within one package. The ARM cores execute supervisory and sequencing software, while FPGA fabric implements deterministic control paths, monitoring logic, or specialized data acquisition. Integrating these functions can reduce inter-device communication and support traceable partitioning between software and hardware. However, the ordered suffix C identifies commercial-temperature operation from 0°C to 85°C, so the exact device is not automatically suitable for an extended-range aerospace environment. A qualified device with the required temperature, reliability, and screening level should be selected for that application. Even with a suitable SoC, the system integrator must complete radiation, environmental, safety, and board-level qualification independently.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7Z030-1FBG676C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7Z030-1FBG676I | XC7Z030-2FBG676C | XC7Z030-3FBG676C | XC7Z035-1FBG676C | XC7Z045-1FBG676C |
|---|---|---|---|---|---|---|
| Package | 676-ball FCBGA (27 mm x 27 mm) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Speed Grade | -1 | -1 | -2 | -3 | -1 | -1 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial | Commercial | Commercial | Commercial | Commercial |
Wichtigste Unterscheidungsmerkmale
- Commercial-temperature ordering option in the -1 speed grade (vs. XC7Z030-1FBG676I)
- 667 MHz processor operating point (vs. XC7Z030-2FBG676C)
- Balanced 125K-cell programmable-logic configuration (vs. XC7Z045-1FBG676C)
- Integrated dual-core processor and CoreSight visibility (vs. XC7Z035-1FBG676C)
Designhinweise
Use the AMD XC7Z30 FBG676/FFG676 placement diagram and the official Zynq-7000 package pinout files as the authority for ball assignment. The 676-ball FCBGA footprint on a 27 mm by 27 mm body requires careful escape routing from the fine-pitch ball grid to the board perimeter. Confirm the selected PCB stackup, via dimensions, mask-defined lands, solder-mask clearance, and assembly land pattern against AMD package documentation before releasing artwork.
Treat the XC7Z030 processor rails, FPGA core rails, memory rails, I/O supplies, and auxiliary pins as separate power domains until the AMD power guide confirms otherwise. Follow the manufacturer’s recommended decoupling and power-supply sequencing. Do not consolidate rail filtering or omit startup requirements merely because the logic and processor share one package. Validate steady-state and transient current at the selected speed grade with realistic processor activity and programmable-logic utilization.
The 676-ball FCBGA relies heavily on its PCB land pattern and internal construction for heat removal. Place thermal vias beneath the device according to AMD guidance, retain as much uninterrupted copper as the layer stack permits, and assess the finished board in its enclosure. Commercial operation from 0°C to 85°C does not mean the junction can safely reach 85°C; use the AMD thermal data to determine the allowable power and airflow margin.
Do not approve a replacement solely because two devices share the FBG676 package family. A speed-grade change can affect timing closure and power, an industrial suffix changes temperature requirements, and the XC7Z035 or XC7Z045 can alter available programmable-logic resources. Check the exact order code, AMD package pinout, configuration compatibility, power requirements, tool support, and existing PCB constraints before replacing the XC7Z030-1FBG676C.
Compliance-Informationen
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for this exact order code was identified. The commercial suffix identifies temperature grade, not automotive qualification.