AMD

XC7Z030-2FBG676I - 125K Cell Dual Cortex-A9 SoC | AMD

MPN: XC7Z030-2FBG676I ✓ Aktif
1.2 V Vdss 676-pin FCBGA Package 800 MHz Speed
MOQ: 1 |

XC7Z030-2FBG676I Ringkasan

AMD XC7Z030-2FBG676I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor, CoreSight debug capability, and 125K FPGA logic cells, operating at 800 MHz in a 676-pin FCBGA package measuring 27 x 27 mm. The device combines programmable logic with an embedded application processor in one package, making it suitable for industrial control, communications, embedded vision, and software-defined radio systems.

A Zynq-7000 SoC is a heterogeneous processing platform rather than a conventional FPGA or microcontroller alone. Its architecture integrates an Arm Cortex-A9-based hard processor subsystem with FPGA logic, programmable block RAM, DSP slices, high-speed serial links, and dedicated I/O. Software can run in the processor subsystem while time-critical filtering, interfaces, or protocol processing execute in parallel programmable logic.

Key resources include 125K logic cells, 400 DSP slices, 265 block RAMs, and four GTX high-speed transceiver links according to the device and application data. The Arm subsystem provides dual Cortex-A9 processing with CoreSight support, while the FPGA fabric supports hardware acceleration and flexible peripheral integration. This combination is especially valuable when a design requires both high-level Linux or real-time software control and deterministic data-path processing.

The FBG676 device uses a 676-pin flip-chip ball-grid-array package on a 27 x 27 mm substrate. AMD package-pinout resources specify separate package files in ASCII and CSV formats, which should be used when validating every ball assignment, power rail, high-speed differential pair, and exposed thermal land before PCB release.

Typical applications include industrial motion and machine control, network appliances, test equipment, embedded cameras, communications infrastructure, and software-defined radio. In an SDR architecture, Cortex-A9 software can manage configuration and protocols while the FPGA fabric performs high-rate filtering and digital conversion.

PCB design must account for numerous supply rails, high-speed transceiver routing, ball-grid-array escape routing, and package thermal performance. Use the AMD package files and datasheet power guidance to define layer transitions and decoupling, and verify the complete design against the pinout rather than relying only on package dimensions.

This page consolidates the device identity, source-backed technical characteristics, same-package upgrade paths, comparison criteria, and application guidance to help engineers qualify the XC7Z030-2FBG676I before schematic capture and PCB layout.

Alternatif penggantian untuk XC7Z030-2FBG676I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian XC7Z030-2FBG676I (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, Device Type, Programmable Logic, Logic Cells.

AMD
Mounting Type: Surface mount
Device Type: Zynq-7000 Kintex-7 system-on-chip
Programmable Logic: Kintex-7 FPGA fabric
Bandingkan dengan XC7Z030-2FBG676I →
AMD
Package: 676-pin FCBGA (27 x 27 mm)
Mounting Type: Surface mount
Device Type: Zynq-7000 system-on-chip (SoC)
Bandingkan dengan XC7Z030-2FBG676I →
AMD
Package: 676-FCBGA (27 x 27 mm)
Device Type: Zynq-7000 system-on-chip with dual Arm Cortex-A9 MPCore and Kintex-7 FPGA
Programmable Logic: 125K Kintex-7 FPGA logic cells
Bandingkan dengan XC7Z030-2FBG676I →
AMD
Package: 676-FCBGA
Mounting Type: Surface-mount BGA
Bandingkan dengan XC7Z030-2FBG676I →
AMD
Mounting Type: Surface mount, ball grid array
Device Type: Zynq-7000 Kintex-7 system-on-chip (SoC)
Bandingkan dengan XC7Z030-2FBG676I →
AMD
Package: 676-FCBGA (27x27 mm)
Mounting Type: Surface Mount
Logic Cells: 350K
Bandingkan dengan XC7Z030-2FBG676I →

XC7Z030-L2FBG676I

✅ Drop-In
📦 676-pin FCBGA (27 x 27 mm)
Same FBG676 package and XC7Z030 -2 family position; ordering code adds the L designation, with package resources confirming the same 676-ball outline and 125K-cell device class.

📋 Alternatif referensi (tidak dalam katalog)

XC7Z030-2FFG676I

✅ Drop-In
AMD
📦 676-pin FCBGA (27 x 27 mm)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FBG676C

✅ Drop-In
AMD
📦 676-pin FCBGA (27 x 27 mm)
Zynq-7000 FPGA SoC with ARM Cortex-A9 processor · Dual-core ARM Cortex-A9 MPCore · ARMv7-A · 667 MHz · 2.5 DMIPS/MHz per CPU · 125K Kintex-7 logic cells · 130 I/Os · Coherent multiprocessor support

Kontak untuk harga

Lihat Datasheet →

XC7Z030-1FFG676I

✅ Drop-In
AMD
📦 676-pin FCBGA (27 x 27 mm)
Zynq-7000 SoC with programmable logic and ARM processor · Dual ARM Cortex-A9 MPCore · 2 cores · 667 MHz · Kintex-7 FPGA · 125K logic cells · CoreSight · 676-FCBGA

Kontak untuk harga

Lihat Datasheet →

XC7Z030-3FFG676E

✅ Drop-In
AMD
📦 676-pin FCBGA (27 x 27 mm)
Zynq-7000 Kintex-7 system-on-chip (SoC) · Dual ARM Cortex-A9 MPCore · 1 GHz · 125K logic cells · Kintex-7 · -3 · E extended-temperature designation · CoreSight

Kontak untuk harga

Lihat Datasheet →

XC7Z030-2FBG676I Rating Maksimal & Karakteristik Listrik

Product Type Zynq-7000 Kintex-7 FPGA SoC
Processor Dual Arm Cortex-A9 MPCore
Processor Frequency 800 MHz
Programmable Logic 125K logic cells
DSP Resources 400 DSP slices
Block RAM 265 block RAMs
High-Speed Serial Links 4 GTX links
Debug Support CoreSight
Paket 676-pin FCBGA
Package Dimensions 27 x 27 mm
Tipe Mounting Surface-mount flip-chip BGA
Core Supply Voltage 1.2 V
I/O Supply Voltage 3.3 V
Processor Architecture 32-bit Arm Thumb-2

XC7Z030-2FBG676I 27 x 27 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk XC7Z030-2FBG676I (27 x 27 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 27 x 27 mm untuk XC7Z030-2FBG676I

Tidak ada data diatribut pin yang tersedia untuk XC7Z030-2FBG676I.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

XC7Z030-2FBG676I cocok untuk 6 aplikasis: Industrial Automation and Motion Control, Software-Defined Radio, Embedded Vision and Camera Processing, Communications and Network Appliances, Test and Measurement Instrumentation, Aerospace and High-Reliability Control.

🏭

Industrial Automation and Motion Control

The XC7Z030-2FBG676I suits industrial controllers that must combine deterministic machine-control logic with a higher-level operating system. Its 800 MHz dual Cortex-A9 processor can coordinate communications, diagnostics, and supervisory control, while 125K FPGA logic cells execute time-critical sequencing or interface logic in parallel. The 400 DSP slices and 265 block RAMs support signal conditioning and data buffering without relying exclusively on the processor. In a compact controller, this architecture reduces component count and inter-device data movement. The design trade-off is PCB complexity: the 676-pin FCBGA requires multilayer escape routing, careful decoupling, high-speed length matching, and a thermal design based on copper and vias rather than exposed leads.

🌐

Software-Defined Radio

The XC7Z030-2FBG676I fits a software-defined radio split between protocol management and real-time signal processing. Cortex-A9 software can handle configuration, networking, control protocols, and monitoring, while the programmable fabric performs high-rate filtering, symbol processing, or digital conversion. The device provides 400 DSP slices, 265 block RAMs, and four GTX links, giving a designer substantially more parallel throughput than a processor-only implementation. Designers should allocate the four GTX transceivers carefully because each high-speed interface introduces clocking, impedance, and signal-integrity constraints. The 676-ball package also makes connector fanout and thermal vias central to the PCB architecture, particularly when an enclosure limits airflow.

🎥

Embedded Vision and Camera Processing

The XC7Z030-2FBG676I is appropriate for embedded imaging systems that combine image acquisition, preprocessing, and network or control software. Its programmable logic can execute pixel pipelines, filtering, thresholding, and frame-buffer operations in parallel, while the dual Cortex-A9 processor manages image algorithms, networking, user interfaces, or operating-system tasks. With 125K logic cells, 265 block RAMs, and 400 DSP slices, the device supports a meaningful hardware pipeline close to the image source and can reduce traffic across an external processor bus. Camera and display interfaces still require exact I/O selection and voltage compatibility. Because the SoC is a 27 x 27 mm, 676-pin BGA, board routing, connector placement, and enclosure heat dissipation must be addressed before the camera interface is frozen.

🌐

Communications and Network Appliances

The XC7Z030-2FBG676I supports communications appliances that need protocol processing in software and packet handling or data-plane work in programmable logic. The processor subsystem can run networking stacks, management agents, encryption services, and diagnostics, while 125K FPGA logic cells accommodate custom framing, buffering, traffic shaping, or hardware acceleration. Its four GTX links provide a foundation for high-speed serial connections when board-level retimers, connectors, and clock architecture can support them. Partitioning between the processor and FPGA is the critical design decision: moving latency-sensitive work into hardware can improve determinism, but it increases verification and tool-flow complexity. The large BGA also requires a multilayer PCB with sufficient escape routing and power distribution around the device.

🔧

Test and Measurement Instrumentation

The XC7Z030-2FBG676I is well suited to instrumentation that combines flexible signal processing with embedded control software. Time-critical acquisition, filtering, triggering, and data transformation can be implemented in the FPGA fabric, while the Cortex-A9 subsystem controls the instrument, runs the user interface, handles calibration, and communicates with a host. The 400 DSP slices and 265 block RAMs are useful for parallel numerical operations, and the processor-to-logic interface permits high-throughput data exchange when the design is partitioned carefully. Accurate results also depend on clean analog front ends and controlled clocking, which are external to the SoC. The 676-ball package demands careful BGA fanout and multilayer stack-up, so the instrument's connector density and thermal envelope should influence the architecture early.

✈️

Aerospace and High-Reliability Control

The XC7Z030-2FBG676I can support embedded control and monitoring systems that benefit from combining processor software and programmable hardware. The Arm subsystem can execute supervisory functions, while FPGA logic can monitor fast-changing inputs and implement deterministic control paths. Using the same SoC for both functions may reduce interprocessor communication and board area, although deployment must remain consistent with the program's device qualification, radiation, temperature, and lifecycle requirements. The target's -2 speed grade and industrial I suffix should be evaluated against the broader qualification package rather than assumed sufficient for every aerospace program. Board-level power integrity and thermal margins are especially important in compact sealed systems, and designers should reserve enough copper and vias to remove heat from the BGA package.

What are the key specifications of XC7Z030-2FBG676I that engineers should know?
The XC7Z030-2FBG676I is a Zynq-7000 Kintex-7 FPGA SoC with 125K logic cells, a dual-core Arm Cortex-A9 processor, 800 MHz processor operation, 400 DSP slices, 265 block RAMs, and four GTX links. It is packaged in a 676-pin FCBGA measuring 27 x 27 mm. According to the AMD Zynq-7000 product and application information, the processor and programmable logic operate concurrently, allowing software control and hardware data-path acceleration to share one device.
Where can I download the XC7Z030-2FBG676I datasheet PDF?
The XC7Z030-2FBG676I datasheet is available through the AMD document center at the official data-sheet link on this page. AMD documentation also provides Zynq-7000 package-device pinout files in ASCII and CSV formats, with the file format described by UG865. Use the data sheet for electrical limits, power requirements, speed-grade information, and the package file for exact ball assignments and PCB land patterns.
Where can I find the XC7Z030-2FBG676I pinout and package files?
The authoritative XC7Z030-2FBG676I pin information is distributed by AMD in the Zynq-7000 package-device pinout files. AMD states that the downloadable archive contains package files in ASCII TXT and CSV formats. Use these files to map every ball, supply rail, I/O, transceiver lane, and power or ground land; do not infer the 676-ball arrangement solely from the 27 x 27 mm package outline.
What is XC7Z030-2FBG676I used for?
The XC7Z030-2FBG676I is used when a system needs both an embedded Arm processor and programmable hardware in one package. Its 800 MHz dual Cortex-A9 subsystem can run operating systems, communications software, or control logic, while 125K FPGA logic cells, 400 DSP slices, and 265 block RAMs support parallel data processing. Typical uses include industrial automation, communications equipment, embedded vision, instrumentation, and software-defined radio.
How does the XC7Z030-2FBG676I compare with XC7Z030-2FFG676I?
Both devices are identified as XC7Z030 Zynq-7000 devices in 676-pin packages, but the FBG and FFG package identifiers must be checked against their separate AMD pinout files before interchange. The target provides 125K logic cells and an 800 MHz dual Cortex-A9 subsystem. Because speed grade, temperature suffix, power characteristics, and ball assignments may differ, use XC7Z030-2FFG676I only after comparing the exact package file and device table.
Is XC7Z030-2FBG676I suitable for software-defined radio applications?
The XC7Z030-2FBG676I is suitable for software-defined radio when the Cortex-A9 subsystem handles configuration and protocols while the FPGA fabric implements the sample-rate DSP path. Its 400 DSP slices, 265 block RAMs, 125K logic cells, and four GTX links support parallel filtering and high-speed serial connectivity. The key trade-off is a large 676-pin BGA that demands careful power integrity, transceiver routing, and thermal design.
When should I choose XC7Z030-2FBG676I instead of a lower-speed XC7Z030 variant?
Choose XC7Z030-2FBG676I when the design benefits from its 800 MHz Cortex-A9 operating point and requires the 676-pin FBG676 footprint. A lower-speed XC7Z030 grade may be adequate when timing closure does not require the higher grade, but the complete package pinout, temperature grade, qualification status, and supply requirements still must match. This decision should follow timing analysis and device-availability requirements rather than package name alone.
What can replace XC7Z030-2FBG676I on the same PCB?
The closest same-package candidates include XC7Z030-2FFG676I, XC7Z030-1FBG676C, XC7Z030-1FFG676I, XC7Z030-L2FBG676I, and XC7Z030-3FFG676E, subject to exact pinout and qualification review. These are 676-ball Zynq-7000 variants rather than unrelated processors. Before replacement, compare the AMD package files, device identification table, speed grade, temperature range, power rails, configuration, transceiver capabilities, and software-device support.
Can XC7Z030-2FFG676I replace XC7Z030-2FBG676I without PCB changes?
XC7Z030-2FFG676I is a same-family 676-pin candidate for XC7Z030-2FBG676I, but a PCB-change-free substitution must be confirmed from AMD's separate FFG676 and FBG676 package files. AMD support discussion for related FBG and FFG variants specifically warns that separately described pinouts require verification. Treat the alternative as a qualified same-footprint candidate only after ball-by-ball comparison and successful hardware validation.
What is the best AMD equivalent for XC7Z030-2FBG676I?
AMD's XC7Z030-L2FBG676I is the closest same-brand, same-package candidate because it retains the FBG676 package and the -2 device family position, with the additional L ordering-code designation. The target has 125K logic cells and an 800 MHz processor, while the L2 part is documented with the same package outline and processor class. Confirm ordering information, temperature grade, and lifecycle status in AMD's product tables before approval.
How much power does XC7Z030-2FBG676I consume?
The XC7Z030-2FBG676I power consumption depends on the selected core voltage, I/O voltage, processor activity, programmable-logic utilization, I/O loading, and GTX transceiver state. The device is identified as a 1.2 V core and 3.3 V I/O part, but a single total-wattage figure would not represent normal, high-performance, and standby operation. Use the AMD datasheet power tables and Vivado power estimation with the actual design utilization.
What thermal and PCB-layout considerations apply to XC7Z030-2FBG676I?
The XC7Z030-2FBG676I requires a BGA-aware layout with uninterrupted supply distribution, local decoupling, careful return paths, and controlled geometry for high-speed GTX signals. Its 676-ball FCBGA has no leaded package for board-level heat spreading, so thermal performance depends strongly on the PCB copper, thermal vias, enclosure, and airflow. Start the design with AMD's package files and evaluate the exposed thermal land and multilayer thermal path in the stack-up before fabrication.
Is XC7Z030-2FBG676I active and suitable for new designs?
The XC7Z030-2FBG676I is currently offered by AMD/Xilinx through multiple distribution channels, with live product and inventory pages present at the time of verification. This supports using it as an active sourcing target for new designs, subject to a formal lifecycle review. The device must also meet the application's temperature, qualification, longevity, and supply-chain requirements before production release.
Where can I buy XC7Z030-2FBG676I and check its lead time?
Use the Request a Quote form on this page to request XC7Z030-2FBG676I pricing, stock confirmation, and current lead time. Because this high-density FPGA SoC can have allocation-sensitive lead times, provide the required quantity, delivery location, target date, and whether the order must be traceable. The platform can then respond against the exact FBG676 ordering code rather than a broader Zynq-7000 family designation.
What is the price of XC7Z030-2FBG676I and is it in stock?
The current XC7Z030-2FBG676I unit price and stock position should be obtained through the Request a Quote form on this page. The exact ordering code includes the -2 speed grade, FBG676 package, and industrial I temperature suffix, so a family-level or generic Zynq quote may not reflect the correct device. Supply can vary with quantity and production allocation, making a quote confirmation the appropriate purchasing path.
Is XC7Z030-2FBG676I compatible with standard FPGA development tools?
The XC7Z030-2FBG676I is supported within the AMD/Xilinx Zynq-7000 design flow, including programmable-logic implementation and Arm software development. Projects commonly use Vivado for hardware synthesis, implementation, programming, and timing analysis, with an appropriate SDK or software-development environment for the Cortex-A9 subsystem. Tool-version support and device installation should be checked against the selected Vivado release before migrating an existing design.

Data referensi engineering untuk XC7Z030-2FBG676I — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Select the XC7Z030-2FBG676I when a design needs the combination of an 800 MHz dual Cortex-A9 subsystem, 125K FPGA logic cells, 400 DSP slices, 265 block RAMs, and four GTX links in the FBG676 package. XC7Z030-L2FBG676I is the closest ordering-code alternative and should be preferred when its procurement configuration fits the program. XC7Z030-2FFG676I preserves the -2 grade and 676-pin format, but FBG and FFG package files must be compared before accepting a footprint substitution. XC7Z030-1FBG676C and XC7Z030-1FFG676I use lower speed grades and may require timing reclosure or a broader temperature review. XC7Z030-3FFG676E offers a higher speed code with an extended-temperature suffix. In every case, validate the AMD ball map, power rails, configuration pins, transceiver assignments, thermal design, and device qualification before releasing a replacement order.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini XC7Z030-L2FBG676I XC7Z030-2FFG676I XC7Z030-1FBG676C XC7Z030-1FFG676I XC7Z030-3FFG676E
Brand AMD AMD AMD AMD AMD AMD
Package 676-pin FCBGA (27 x 27 mm) 676-pin FCBGA (27 x 27 mm) 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA 676-pin FCBGA
Device Family Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030 Zynq-7000 XC7Z030
Speed Grade Code -2 -2 -2 -1 -1 -3
Temperature Suffix I I I C I E

Diferensiator Kunci

  • Combines an 800 MHz dual-core Arm processor with dedicated programmable logic (vsXC7Z030-2FFG676I)
  • Provides 400 DSP slices and 265 block RAMs for parallel signal processing (vsXC7Z030-1FBG676C)
  • Uses the industrial I temperature suffix with the -2 speed grade (vsXC7Z030-1FBG676C)

Catatan Desain

Begin the PCB layout with the official AMD package-device pinout files rather than a generic 676-BGA library. The 27 x 27 mm FBG676 footprint has 676 numbered balls, and small differences in ball-map family code can change power, ground, configuration, I/O, and transceiver assignments. Reserve compliant escape routing on the top layer, then place decoupling capacitors and power vias near the relevant device balls. Review every high-speed GTX lane as a controlled-impedance differential route with its specified return-path behavior.

Use the AMD data sheet to separate core, I/O, auxiliary, and transceiver supply requirements before selecting regulators or placing bulk capacitance. The device is associated with a 1.2 V core and 3.3 V I/O environment, but those values alone do not define rail sequencing, tolerance, or transient requirements. Place local high-frequency decoupling directly at the BGA power and ground balls, use multiple thermal and electrical vias where the footprint permits, and verify the complete rail network with power-integrity simulation using the actual layer stack-up and loading.

The flip-chip BGA has no protruding leads, so PCB copper and thermal vias are the principal board-level heat-spreading mechanism. Establish the target ambient temperature, processor activity, FPGA utilization, I/O load, and transceiver duty cycle before sizing the thermal path. Route heat from the package thermal land into inner copper layers and provide vias to a thermal plane where the mechanical design permits. Validate the assembled board with thermal imaging or thermocouples because processor-only estimates do not capture FPGA fabric, DDR, I/O, and power-conversion heating.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The comparison search refers to RoHS and REACH fields, but the returned excerpts do not state the target device's compliance values. No qualification claim is made for AEC-Q100 because the target is an FPGA SoC rather than an automotive-qualified device in the cited information.

Pencarian Terkait

xc7z030 2fbg676i xc7z030 2fbg676i datasheet XC7Z030-2FBG676I pinout XC7Z030-2FBG676I datasheet pdf XC7Z030-2FBG676I equivalent XC7Z030-2FBG676I replacement XC7Z030-2FBG676I cross reference XC7Z030-2FBG676I vs XC7Z030-2FFG676I XC7Z030-2FBG676I footprint AMD XC7Z030-2FBG676I XC7Z030-2FBG676I software defined radio XC7Z030-2FBG676I price

Komponen dan Istilah Terkait

AMD Xilinx XC7Z030-2FBG676I XC7Z030-L2FBG676I XC7Z030-2FFG676I XC7Z030-1FBG676C XC7Z030-1FFG676I XC7Z030-3FFG676E Zynq-7000 Kintex-7 FPGA SoC system on chip programmable logic Arm Cortex-A9 MPCore CoreSight DSP slice block RAM GTX transceiver FCBGA-676 BGA package surface mount Vivado software-defined radio industrial automation
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ