XCKU040-L1SFVA784I - Kintex UltraScale FPGA, 784-FCBGA | AMD
Teilenummer: XCKU040-L1SFVA784I ✓ AktivXCKU040-L1SFVA784I Übersicht
The -1L speed grade is the key variant feature: these devices can operate at either a 0.95 V or 0.90 V VCCINT core supply and are screened for lower maximum static power than standard -1 grade parts, which directly reduces thermal design burden in dense designs where logic utilization is high.
UltraScale devices provide 16.3 Mb of block RAM, 192 DSP48E2 slices, and 32.5 Mb of distributed RAM, together with 12.5 Gb/s Transceiver Wizard GTX line rates, integrated memory interface controllers, and dedicated PCIe Gen3 hard blocks. These resources allow a single Kintex UltraScale device to replace multi-chip solutions in protocol bridging, video and image processing, industrial control, and test instrumentation.
The UltraScale architecture improves power efficiency through selective bias control and programable dynamic power management, while the AXI4 interconnect fabric and clocking architecture scale to thousands of taps. A 784-ball FCBGA package exposes 468 I/O pins, which is the highest I/O count in the Kintex UltraScale offering and is ideal for parallel sensor arrays, high-parallelism data acquisition, and multi-channel telecom interfaces.
Typical applications include 5G and broadband baseband equipment, radar and electronic warfare signal chains, high-speed industrial data acquisition, machine vision, video infrastructure, and instrumentation requiring large parallel I/O and DSP throughput. The industrial temperature grade and extended product life cycle make the device suitable for long-lifetime industrial programs.
Design consideration: this package has 784 balls on a 31 mm x 31 mm footprint, so PCB design must be done on a multilayer board with buried vias and controlled differential impedance. Differential pairs for Transceivers, clocks, and DDR memory must follow the AMD UltraScale design guidelines, and a complete power-up sequence across VCCINT, VCCAUX, VCCBRAM, and the VCCO rails is mandatory before configuration.
Drop-in-Alternativen für XCKU040-L1SFVA784I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XCKU040-L1SFVA784I (gleiche Bauform und Footprint) – abweichend in Device Type, Package, Speed Grade, Industrial Junction Temperature, Logic Cells.
XCKU040-1SFVA784I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU040-2SFVA784I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU040-3SFVA784I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XCKU040-1SFVA784C
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XCKU035-1SFVA784C
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XCKU040-L1SFVA784I Grenzwerte & elektrische Eigenschaften
| Device Type | Kintex UltraScale FPGA (logic cell array) |
| Logic Cells | 424,200 cells |
| Process Technology | 20 nm |
| Speed Grade | -1L (low-voltage, reduced static power) |
| VCCINT Options | 0.95 V or 0.90 V |
| User I/O | 468 I/O |
| Gehäuse | 784-BFBGA (SFVA784) FCCSP |
| Package Dimensions | 31 mm x 31 mm FCBGA |
| Montageart | Surface Mount |
| Block RAM | 16.3 Mb |
| DSP Slices (DSP48E2) | 192 |
| Distributed RAM | 32.5 Mb |
| GTX Transceiver Line Rate | 12.5 Gb/s per lane |
| Supply Voltage Class | 0.95 V (per FindIC listing for this device) |
| Temperature Grade | Industrial (-1I suffix) |
| Packaging / Shipping | Tray (per distributor listing) |
XCKU040-L1SFVA784I 31 mm x 31 mm fcbga Pinbelegungsleitfaden
Pinbelegung für XCKU040-L1SFVA784I (31 mm x 31 mm fcbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XCKU040-L1SFVA784I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XCKU040-L1SFVA784I ist geeignet für 6 Anwendungs: 5G and Broadband Baseband Equipment, Radar and Electronic Warfare Signal Processing, High-Channel-Count Industrial Data Acquisition, Machine Vision and Industrial Inspection, Video Infrastructure and Broadcast Processing, Aerospace and Defence Avionics.
5G and Broadband Baseband Equipment
The XCKU040-L1SFVA784I suits radio baseband and small-cell line cards where a single device must absorb multiple DSP pipelines plus control logic. The 192 DSP48E2 slices and 424,200 logic cells allow a single FPGA to implement FFT, channel estimation and rate matching stages, while 468 I/O serve parallel CPRI and backhaul interfaces. The -1L grade lowers static power at a 0.90 V VCCINT setting, which matters in a line card that repeats the same part across many channels in a sealed outdoor enclosure with limited convection cooling. GTX lanes at up to 12.5 Gb/s handle the radio datapath directly, removing the need for a separate PHY device.
Empfohlen
Radar and Electronic Warfare Signal Processing
Wideband radar receivers need many channels of ADC data captured in parallel and then conditioned digitally, and that is exactly where the 468 I/O of the XCKU040-L1SFVA784I helps. ADC samples can be captured on parallel LVDS banks into the 16.3 Mb of block RAM, while the 192 DSP48E2 slices perform digital down-conversion, matched filtering and pulse compression in parallel. The device also provides the deterministic latency needed for coherent processing chains, and the large 31 mm FCBGA land pattern supports the dense decoupling network these high-speed designs require. The -1L low-static-power screening helps in space-constrained RF modules where conducted heat cannot be removed quickly.
Empfohlen
High-Channel-Count Industrial Data Acquisition
Test and measurement front-ends frequently need to capture many analog channels synchronously, and the XCKU040-L1SFVA784I provides 468 I/O for parallel ADC multiplexing alongside 192 DSP48E2 slices for per-channel calibration and filtering. Because each I/O bank has its own VCCO rail, different interface standards can coexist on the same device, which removes board area otherwise spent on level translators. The 16.3 Mb block RAM allows long acquisition windows for waveform analysis, and the deterministic architecture supports repeatable, calibration-friendly measurements. For instrumentation that runs warm inside a 19-inch rack, the -1L grade is preferred because its lower maximum static power reduces the need for forced air behind the instrument.
Empfohlen
Machine Vision and Industrial Inspection
Industrial camera and inspection systems combine parallel image capture with heavy pixel-level processing, and the XCKU040-L1SFVA784I is well matched because 468 I/O can host wide parallel camera interfaces while 192 DSP slices run filter, morphology and correlation pipelines. The large 784-ball package also gives access to enough I/O for multiple cameras plus encoder, trigger and strobe lines without multiplexing. The -1L grade helps in camera housings with limited airflow because it is screened for lower maximum static power, and the industrial temperature grade supports factory-floor environments. Block RAM of 16.3 Mb provides line and frame buffers without external memory for moderate resolution formats.
Empfohlen
Video Infrastructure and Broadcast Processing
Video processing boards in broadcast and test equipment need to move pixel data at line rate across many channels, which is where the 468 I/O and 12.5 Gb/s GTX lanes of the XCKU040-L1SFVA784I become valuable. A single part can implement deinterlacing, scaling and chroma processing plus 3D-LUT management, while the transceivers feed or receive video over coax or fibre without an external link chip. The 192 DSP48E2 slices handle FIR filters and motion compensation efficiently, and the 16.3 Mb of block RAM buffers multiple frames. For chassis-mounted equipment, running the -1L grade at 0.90 V VCCINT trims the static power that dominates in lightly loaded video pipelines.
Empfohlen
Aerospace and Defence Avionics
Avionics and mission-computing modules need predictable timing, deterministic I/O and long program life cycles, and the XCKU040-L1SFVA784I provides an industrial-temperature Kintex UltraScale option with 468 I/O for sensor and datalink interfaces. The 192 DSP48E2 slices support modems, filters and transform engines for onboard signal processing, while GTX lanes carry high-rate sensor or recorder data internally. Using a single large device rather than several smaller ones reduces board area, weight and inter-board interconnect risk in a vibration-controlled enclosure. Qualification status for aerospace programs should be confirmed with the manufacturer, and the power plan should be based on the -1L static power screening to keep thermal margins inside a sealed box.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XCKU040-L1SFVA784I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XCKU040-1SFVA784I | XCKU040-2SFVA784I | XCKU040-3SFVA784I | XCKU040-1SFVA784C | XCKU035-1SFVA784C |
|---|---|---|---|---|---|---|
| Package | 784-BFBGA (SFVA784) FCCSP | 784-BFBGA (SFVA784) FCCSP - same | 784-BFBGA (SFVA784) FCCSP - same | 784-BFBGA (SFVA784) FCCSP - same | 784-BFBGA (SFVA784) FCCSP - same | 784-BFBGA (SFVA784) FCCSP - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Speed Grade | -1L (0.95 V or 0.90 V VCCINT, low static power) | -1 (0.95 V VCCINT) | -2 (0.95 V VCCINT) | -3 (0.95 V VCCINT) | -1 (0.95 V VCCINT) | -1 (0.95 V VCCINT) |
| Temperature Grade | Industrial (-1I) | Industrial (-1I) | Industrial (-2I) | Industrial (-3I) | Commercial (-1C) | Commercial (-1C) |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| Supply Voltage (VCCINT) | 0.95 V or 0.90 V (-1L) | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V |
| Shipping Format | Tray | Tray | Tray | Tray | Tray | Tray |
Wichtigste Unterscheidungsmerkmale
- Dual-voltage low-power core operation (vs. XCKU040-1SFVA784I)
- Highest I/O count in the Kintex UltraScale family (vs. XCKU040-1FBVA676I)
- Consistent large-package footprint across speed grades (vs. XCKU040-2SFVA784I)
- One package size replaces three different board spins (vs. XCKU040-1FFVA1156C)
Designhinweise
The -1L grade lets the core run at either 0.95 V or 0.90 V VCCINT, so sequence the supplies exactly as specified: VCCAUX first, then VCCINT, then VCCBRAM, then per-bank VCCO. Never enable configuration until every rail is stable and within tolerance. Place dedicated bulk and high-frequency decoupling on each rail close to the device, since the 784-ball FCBGA needs a dense via-in-pad and buried-via structure to reach the required decoupling inductance. Keep the 0.90 V option in mind when the thermal budget is tight, because lower VCCINT directly reduces core static and dynamic power.
With 468 I/O in a 31 mm x 31 mm FCBGA, the board must be a multilayer design with buried vias and a solid reference plane per VCCO bank. Route all GTX and other high-speed differential pairs on continuous reference planes, keep intra-pair skew within the limits stated for the selected transceiver quad, and avoid vias in the pair where possible. Use the AMD UltraScale package pinout files and the IO Port spreadsheet together: signals such as DIFF_SSTL12_DCI strobes may not be available on every package, so confirm pin placement before freezing the layout.
Kintex UltraScale power is dominated by dynamic consumption at high utilization and high clock rates, so estimate power with the AMD tool using the real clocking plan and utilization percentages rather than worst-case corners. Because a large FCBGA conducts heat mainly through the board and its vias, reserve a solid copper pour under the device on every layer and provide a thermal via field or a heat spreader if the calculated junction temperature margin is thin. The -1L grade is screened for lower maximum static power, which helps in passive enclosures, but it does not replace airflow planning in a dense system.
A common mistake is assuming that any XCKU040 suffix can be substituted freely: the FFVA1156 and FBVA676 options use different ball counts and pin maps, so they cannot be dropped onto an SFVA784 land pattern. Another frequent error is mixing the -1L part into a board whose power design was calculated for the standard -1 grade, or vice versa. Check the speed-grade, temperature-grade and VCCINT options in the part number against the BOM, and re-verify the static power estimate whenever the grade changes.
Compliance-Informationen
No compliance statements are printed in the device listings available for this part. RoHS, REACH, AEC-Q100 and lead-free status should be confirmed from the current AMD product environmental and qualification documentation for the exact orderable part number.