XC7K325T-1FFG900I - 326K Kintex-7 FPGA | AMD/Xilinx
Teilenummer: XC7K325T-1FFG900I ✓ AktivXC7K325T-1FFG900I Übersicht
A Kintex-7 FPGA is a programmable logic device that combines configurable logic blocks, block RAM, DSP arithmetic resources, high-speed serial transceivers, and programmable I/O in one semiconductor. Within the FPGA hierarchy, the XC7K325T belongs to the AMD Kintex-7 family and provides substantially more parallel processing capacity than smaller FPGA families while supporting the same general design flow for programmable logic, DSP, connectivity, and hardware acceleration.
Key device attributes include 326,080 logic cells, 25,475 configurable logic blocks, 500 I/O, and a listed maximum operating frequency of 1,098 MHz for the XC7K325T device family. The 28 nm HKMG CMOS process combines high-k dielectric and metal-gate transistor structures to reduce leakage while supporting demanding clocking, serial connectivity, and signal-processing workloads. The FFG900 package exposes the largest Kintex-7 I/O and power-delivery resources in the family.
The device is appropriate for designs combining parallel logic, DSP pipelines, high-speed memory interfaces, and networked data movement. Its large logic capacity allows multiple processing channels, packet-processing functions, or accelerator blocks to be integrated into one programmable device. The industrial designation makes the exact XC7K325T-1FFG900I suitable for equipment expected to operate outside consumer-temperature environments, subject to the operating limits and qualification data specified by AMD.
Typical uses include industrial machine vision, test and measurement instrumentation, communications infrastructure, radar and signal processing, high-performance control systems, and custom hardware accelerators. The same feature set can support PCIe Gen3, 10 Gigabit Ethernet, and other high-speed interfaces when the selected Kintex-7 device, configuration, clocking scheme, and board implementation provide the required resources.
Design the FFG900 footprint with the AMD package pinout files and UG475 as the governing references. Pay particular attention to power-grid distribution, decoupling, clock integrity, configuration pins, bank voltage compatibility, and high-speed I/O constraints. Although a larger package offers extensive connectivity, it also requires careful thermal management and a multilayer PCB capable of supporting the device's power and signal requirements.
This product record combines the verified Kintex-7 capacity, speed, package, and I/O characteristics with practical implementation guidance and same-footprint upgrade options. It helps engineers distinguish the -1 industrial device from commercial-temperature and -2 speed-grade variants before validating the complete design, PCB, and thermal solution.
Drop-in-Alternativen für XC7K325T-1FFG900I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7K325T-1FFG900I (gleiche Bauform und Footprint) – abweichend in Package, Process Technology, Temperature Grade, Speed Grade, Programmable Logic Cells.
XC7K325T-1FFG900C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7K325T-1FFG900CES
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7K325T-2FFG900I
✅ Drop-In✓ Auf Lager
$65 / Stück
Datenblatt ansehen →XC7K325T-2FFG900C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7K325T-1FBG900I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC7K325T-1FFG900I Grenzwerte & elektrische Eigenschaften
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| Programmable Logic Cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 CLBs |
| Maximum Device Frequency | 1,098 MHz |
| Process Technology | 28 nm HKMG CMOS |
| I/O Count | 500 I/O |
| Gehäuse | FCBGA-900 |
| Package Type | 900-BBGA FCBGA |
| Montageart | Surface Mount |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Logic Family | Kintex-7 |
| Device Variant | XC7K325T |
| Architecture | FPGA programmable logic architecture |
XC7K325T-1FFG900I 900-bbga fcbga Pinbelegungsleitfaden
Pinbelegung für XC7K325T-1FFG900I (900-bbga fcbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7K325T-1FFG900I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7K325T-1FFG900I ist geeignet für 6 Anwendungs: Industrial Machine Vision, Test and Measurement Instrumentation, Communications and Network Processing, Radar and Digital Signal Processing, High-Performance Custom Accelerators, Industrial Control and Automation.
Industrial Machine Vision
The XC7K325T-1FFG900I fits industrial machine-vision systems that combine image acquisition, preprocessing, feature extraction, and real-time control in one FPGA. Its 326,080 logic cells and 25,475 CLBs provide parallel capacity for multiple pixel pipelines, while 500 I/O support camera interfaces, sensors, and control links. The -1 speed grade supports dependable processing performance without automatically requiring the higher -2 grade. A practical design places camera or sensor interfaces on suitable banks, uses dedicated clocking for pixel cadence, and reserves fabric resources for filtering and object-detection stages. Validate image timing and sensor interface performance during implementation because raw I/O count does not indicate how many channels can operate simultaneously at the required data rates.
Empfohlen
Test and Measurement Instrumentation
The XC7K325T-1FFG900I is suitable for modular test and measurement equipment requiring configurable logic, DSP, timing, and multiple external interfaces. With 326,080 logic cells, the device can host acquisition pipelines, trigger logic, digital signal processing, data packing, and communication functions without relying on several separate controllers. Its 500 I/O sites simplify connection to converters, memory, front-panel logic, and synchronization signals. For high-channel-count systems, engineers should partition I/O into compatible voltage banks and budget dedicated clock inputs. The -1 grade is appropriate when the selected interfaces close timing at that speed; use the -2 option only if critical paths require it. PCB implementation should provide low-noise power planes, adequate decoupling, and controlled clock routing.
Empfohlen
Communications and Network Processing
The XC7K325T-1FFG900I can implement high-throughput communications and network-processing functions where parallel packet handling, buffering, and serialized connectivity coexist. Its 326,080 logic cells are large enough to support multiple pipeline stages and protocol engines, while the FFG900 package provides 500 I/O for network interfaces, status, management, and synchronization. Engineers can use dedicated high-speed serial resources for compatible links and implement lower-rate interfaces in fabric logic. The design must account for bank voltage, clocking, transceiver configuration, and protocol timing rather than treating the 500 I/O figure as uniformly available. The -1 speed grade should be selected only after post-route timing demonstrates that the packet-processing and line-rate requirements are met without the additional power and thermal burden of a faster grade.
Empfohlen
Radar and Digital Signal Processing
The XC7K325T-1FFG900I is appropriate for radar, sonar, and industrial signal-processing systems that combine filtering, correlation, spectral analysis, and control in programmable hardware. The 25,475 CLBs and 326,080 logic cells allow parallel FFT, digital downconversion, thresholding, and tracking stages to be co-located, reducing data movement between external processors. Its 500 I/O also permits high-volume data capture and synchronization. Designers should allocate DSP resources for mathematically intensive blocks and use fabric logic for control, while checking the resource limits and pipeline rates of the selected Kintex-7 device. The -1 speed grade is suitable when timing closure is achieved at that grade; move to -2 when critical DSP or clock paths require additional performance margin. Thermal design should account for sustained utilization rather than idle-device power.
Empfohlen
High-Performance Custom Accelerators
The XC7K325T-1FFG900I fits custom hardware accelerators that require deterministic latency, parallel arithmetic, and high-bandwidth data movement. Its 326,080-cell Kintex-7 resource pool can host multiple accelerator pipelines, control engines, data movers, and validation logic, allowing a complete function to replace a combination of processor and programmable logic. The FCBGA-900 package provides substantial I/O connectivity for external memory, network streams, and accelerator-to-accelerator communication. A successful partition depends on available block RAM, DSP slices, transceivers, and hard processors in the exact XC7K325T configuration. The -1 grade is an efficient baseline when throughput targets close at that speed. Engineers should profile post-route timing and power, then consider a -2 variant only when the additional margin is functionally necessary and thermally manageable.
Empfohlen
Industrial Control and Automation
The XC7K325T-1FFG900I can serve as the central programmable controller in industrial automation equipment requiring deterministic motion control, safety-oriented interlocks, communication, and local data processing. The 326,080 logic cells support parallel control logic and protocol engines, while 500 I/O permit connections to encoders, sensors, actuators, field buses, and diagnostics. Its industrial ordering designation aligns with equipment expected to operate outside typical consumer environments. Partition the design carefully among real-time control logic, communication tasks, and noncritical management functions to prevent timing interference. Keep timing-sensitive paths and clocks isolated from noisy switching nodes, and validate every external interface against the selected I/O bank voltage. The -1 speed grade should be selected after timing analysis confirms that the control loops and communication endpoints meet their margins.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7K325T-1FFG900I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7K325T-1FFG900C | XC7K325T-1FFG900CES | XC7K325T-2FFG900I | XC7K325T-2FFG900C | XC7K325T-1FBG900I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-900 | FCBGA-900 | FCBGA-900 | FCBGA-900 | FCBGA-900 | FCBGA-900 |
| Device Family | Kintex-7 XC7K325T | Kintex-7 XC7K325T | Kintex-7 XC7K325T | Kintex-7 XC7K325T | Kintex-7 XC7K325T | Kintex-7 XC7K325T |
| Speed Grade | -1 | -1 | -1 | -2 | -2 | -1 |
| Programmable Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 CLBs | 25,475 CLBs | 25,475 CLBs | 25,475 CLBs | 25,475 CLBs | 25,475 CLBs |
| I/O Count | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| Process Technology | 28 nm HKMG CMOS | 28 nm HKMG CMOS | 28 nm HKMG CMOS | 28 nm HKMG CMOS | 28 nm HKMG CMOS | 28 nm HKMG CMOS |
| Ordering Class | Industrial | Commercial | Extended-temperature suffix CES | Industrial | Commercial | Industrial |
Wichtigste Unterscheidungsmerkmale
- Same-density same-footprint configuration options (vs. XC7K325T-1FFG900C)
- Higher speed-grade option without changing the 900-ball package class (vs. XC7K325T-2FFG900I)
- Direct industrial-ordering comparison (vs. XC7K325T-1FBG900I)
- Large logic and connectivity envelope for integrated processing (vs. XC7K325T-1FFG900C)
Designhinweise
Generate the FFG900 land pattern directly from AMD's Kintex-7 package device pinout files and compare it against the selected package drawing before release. Confirm ball numbers for every power, ground, configuration, clock, and user I/O assignment; a generic 900-BBGA symbol can contain wrong or incomplete mappings. Preserve the exposed thermal connection and mechanical keep-out requirements from the package drawing, and perform a PCB DRC against both the electrical pinout and physical package dimensions.
Separate the FFG900 supply groups into the voltage rails defined by the AMD power architecture and connect each rail through the documented power-capacitor and decoupling network. Place the smallest high-frequency bypass capacitors directly beside the relevant device supply balls and follow the recommended via-and-capacitor arrangement. Keep switching-converter return currents out of the sensitive plane region. Validate steady-state and transient voltage at the package balls because a correct average rail voltage does not guarantee acceptable local ripple.
Estimated: thermal performance cannot be calculated from the public package summary alone because board area, copper layers, airflow, and the applicable power estimate are required. For each power-density scenario, calculate junction temperature from total device dissipation and the completed board's effective thermal resistance, then compare it with the device and system limits. Use generous low-impedance copper spreading around the exposed package area and avoid placing heat sources directly beneath the BGA. Repeat the calculation at maximum sustained utilization rather than using idle power.
Assign interfaces by voltage bank and verify that every external driver, receiver, and terminator is compatible with the selected VCCO range. Use the AMD clocking and I/O guidance to define reference and package pin assignments, and keep sensitive or high-speed interfaces away from noisy switching return paths. For external memory or serialized links, follow the documented trace-length, package-transition, and via-count guidance. Simulation should include realistic termination, connector, and return-path models rather than ideal source and load assumptions.
Do not treat a different ordering suffix as automatically interchangeable: the -1 and -2 speed grades can change timing margins and power, while I, C, and CES ordering codes affect the applicable temperature or qualification requirements. Before substituting an FFG900 or FBG900 device, compare the exact package pinout, configuration behavior, power architecture, and timing results. Re-run synthesis or implementation, static timing analysis, thermal assessment, and board-level validation under the new ordering code instead of relying only on nominal logic-cell counts.
Compliance-Informationen
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this exact ordering code. Confirm these requirements with AMD for the complete assembled and programmed configuration.