XMC4402F100K256BAXQMA1 - 120MHz Cortex-M4 | Infineon
Teilenummer: XMC4402F100K256BAXQMA1 ✓ AktivXMC4402F100K256BAXQMA1 Übersicht
An MCU is a semiconductor that integrates a processor core, memory, peripherals, and interfaces into one device used to control equipment. The XMC4400 family belongs to the hierarchy of embedded processor, microcontroller, 32-bit microcontroller, and industrial microcontroller. Infineon positions the XMC4402 for mixed-signal and timer-driven applications where deterministic control, networking, and real-time peripheral performance are important.
Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB of program flash, and 80 KB of SRAM. Its Ethernet MAC supports connected industrial equipment, while the high-resolution PWM capability supports precision actuator and power-control tasks. The PG-LQFP-100 package exposes 100 terminals and includes an exposed pad for board-level thermal management. Operating voltage is identified as 3.3 V in distributor product information.
The XMC4400 architecture integrates the Cortex-M4 processing core with Infineon peripherals intended for industrial real-time control. Its timer and PWM resources can generate high-resolution edge timing, improving resolution in motor drive, digital power conversion, and mixed-signal feedback loops. The 256 KB flash allocation provides space for application code and configuration data, while 80 KB of SRAM supports working memory, diagnostics, and control-loop calculations.
Typical applications include industrial motor controllers, servo drives, programmable power supplies, PLC communication modules, industrial Ethernet equipment, and precision sensor-control platforms. In these systems, the MCU can execute control algorithms while using its Ethernet MAC for supervisory communication and its PWM peripherals for accurate actuator or converter timing.
PCB implementation should follow the manufacturer package footprint, land pattern, and pin-assignment tables. Decoupling, analog and digital supply routing, clock stability, exposed-pad thermal design, and high-speed signal layout require careful review. Because the LQFP package has 100 fine-pitch leads, assembly quality and solder-joint inspection are especially important.
This product record combines the manufacturer family positioning, verified distributor specifications, same-footprint alternatives, and practical selection guidance for engineers evaluating the XMC4402F100K256BAXQMA1 for industrial embedded-control designs.
Drop-in-Alternativen für XMC4402F100K256BAXQMA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XMC4402F100K256BAXQMA1 (gleiche Bauform und Footprint) – abweichend in Package, Flash Organization, Product Type, Ethernet Support, Supply Voltage.
XMC4402-F100F256-BA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XMC4402F100K256BAXUMA1
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XMC4400F100K256BAXUMA2
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4400F100K512BAXQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4300F100K256AAXQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4402F100K256BAXQMA1 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| CPU Frequency | 120 MHz |
| Flash Memory | 256 KB |
| SRAM | 80 KB |
| Ethernet Support | Yes, Ethernet MAC |
| High-Resolution PWM Resolution | 150 ps |
| Versorgungsspannung | 3.3 V |
| Gehäuse | PG-LQFP-100 with exposed pad |
| Terminal Count | 100 terminals |
| Package Form | Gull wing, square LQFP |
| Application Classification | Industrial |
| Architecture | ARM 32-bit RISC |
| Flash Organization | 256K x 8 bits |
| Device Family | XMC4000 |
| RoHS-Status | RoHS3 compliant |
| Montageart | Surface mount |
XMC4402F100K256BAXQMA1 gull wing, square lqfp Pinbelegungsleitfaden
Pinbelegung für XMC4402F100K256BAXQMA1 (gull wing, square lqfp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XMC4402F100K256BAXQMA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XMC4402F100K256BAXQMA1 ist geeignet für 6 Anwendungs: Industrial Motor Control, Precision Power Conversion, Industrial Ethernet Control, Programmable Logic Controller, Precision Sensor Interface, Timer-Driven Test and Control.
Industrial Motor Control
The XMC4402F100K256BAXQMA1 fits precision motor-control systems because its 120 MHz Arm Cortex-M4 core can execute control algorithms while the high-resolution PWM unit provides 150 ps edge timing. The 256 KB flash holds motion routines and configuration, while 80 KB of SRAM supports state estimation and control-loop data. In a servo or industrial drive, the MCU can coordinate timers, ADC sampling, current control, and fault handling. The 100-pin PG-LQFP package also exposes enough I/O for encoders, gate drivers, and protection signals, but the design must verify the exact peripheral mapping and thermal performance of the exposed pad.
Empfohlen
Precision Power Conversion
The XMC4402F100K256BAXQMA1 is appropriate for digitally controlled power converters where accurate switching timing influences efficiency and regulation. Its 150 ps high-resolution PWM capability provides finer edge control than a conventional timer-resolution implementation, while the 120 MHz processor supports supervisory control, fault management, and compensation calculations. The 256 KB flash accommodates control code and nonvolatile configuration, and the 80 KB SRAM supports fast working data. Designers should place the device according to the PG-LQFP-100 land pattern, preserve clean ground paths, and account for switching-current coupling between the controller, power stage, and analog feedback network.
Empfohlen
Industrial Ethernet Control
The XMC4402F100K256BAXQMA1 suits industrial Ethernet control equipment because Infineon identifies the XMC4402-F100F256-BA family member with an Ethernet MAC and a 120 MHz Cortex-M4 processor. A controller can run real-time machine functions while Ethernet handles supervisory communication, diagnostics, configuration, and production-line data exchange. Its 256 KB flash is suitable for moderate networking and control firmware, with 80 KB of SRAM available for protocol buffers. Interface implementation still requires confirming PHY support, connector requirements, isolation policy, termination, and the exact assigned pins. Keep the Ethernet differential pair controlled and isolate high-current switching nodes from the digital and analog sections.
Empfohlen
Programmable Logic Controller
The XMC4402F100K256BAXQMA1 can serve as the control core of a compact programmable logic controller or industrial I/O module. Its 120 MHz Cortex-M4 performance supports communication servicing, diagnostics, state-machine execution, and time-critical input or output handling, while 256 KB of flash provides room for protocol stacks and application logic. The 80 KB SRAM supports buffers and task state. The 100-lead package provides a broad interface surface for digital I/O, communications, and analog monitoring functions. Firmware should isolate timing-critical routines, use deterministic interrupt priorities, and validate every peripheral pin against the selected package drawing before schematic capture.
Empfohlen
Precision Sensor Interface
The XMC4402F100K256BAXQMA1 is suitable for high-speed sensor acquisition and signal processing when the application benefits from the 150 ps high-resolution PWM capability and 120 MHz processing speed. It can generate excitation timing, coordinate ADC conversions, apply filtering, and publish processed results over a communications interface. The 256 KB flash supports calibration tables and control code, while 80 KB of SRAM can hold acquisition and processing buffers. Analog integrity is as important as digital timing: use the recommended grounding and decoupling topology, separate sensitive analog returns from switching currents, and verify the ADC, timer-routing, and interrupt capabilities in the XMC4000 documentation before final design release.
Empfohlen
Timer-Driven Test and Control
The XMC4402F100K256BAXQMA1 fits timer-driven test equipment and automated control fixtures that require precise pulse generation, coordinated sampling, and real-time sequencing. Its 150 ps PWM resolution supports accurate edge placement, while the 120 MHz core can manage measurement logic, communication, and system supervision. The 256 KB flash is appropriate for configuration, calibration, and executable firmware, and the 80 KB SRAM supports active capture buffers. For laboratory equipment, isolate analog inputs, maintain impedance-controlled layouts, and validate jitter, slew rate, and output-drive assumptions against the electrical characteristics. Use the exposed-pad copper and thermal design prescribed for the PG-LQFP-100 package to avoid temperature-related timing drift.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XMC4402F100K256BAXQMA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XMC4402-F100F256-BA | XMC4402F100K256BAXUMA1 | XMC4400F100K256BAXUMA2 | XMC4400F100K512BAXQMA1 | XMC4300F100K256AAXQMA1 |
|---|---|---|---|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 class | PG-LQFP-100 class | PG-LQFP-100 class | PG-LQFP-100 class | PG-LQFP-100 class |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB | 256 KB |
| Device Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
Wichtigste Unterscheidungsmerkmale
- Combines Ethernet connectivity with high-resolution timing (vs. XMC4300F100K256AAXQMA1)
- Uses 256 KB flash rather than doubling the target memory configuration (vs. XMC4400F100K512BAXQMA1)
- Closest ordering designation with matching core, memory, and Ethernet description (vs. XMC4400F100K256BAXUMA2)
- Provides 80 KB SRAM for real-time working memory (vs. XMC4300F100K256AAXQMA1)
Designhinweise
Treat the PG-LQFP-100 exposed pad as a mandatory thermal and electrical connection. Follow the package land pattern in the Infineon XMC4000 documentation, provide a continuous ground copper area where permitted by that pattern, and add thermal vias only where they do not compromise the recommended layout. Validate junction temperature using the actual processor activity, ambient temperature, PCB copper, enclosure airflow, and the datasheet thermal model. A nominal 3.3 V supply does not by itself establish safe operating temperature because internal and I/O dissipation vary with clock activity and load.
Route the 100-pin LQFP footprint strictly from the official package drawing and pin table; do not infer connectivity from a similar XMC4300 or XMC4400 board. Confirm exposed-pad geometry, pin-one orientation, land length, and solder mask before Gerber release. Place local supply decoupling at the device pins using the values and topology specified by the manufacturer, keep the return path short, and separate noisy switching nodes from precision analog inputs. Because this is a 100-lead fine-pitch package, inspect solder bridging and wicking during process validation.
The 150 ps high-resolution PWM capability can deliver precise edge timing, but useful system accuracy still depends on clock quality, output loading, and measurement bandwidth. Use the recommended clock configuration and layout, avoid routing timer outputs next to sensitive analog inputs, and account for propagation delay when combining multiple channels. For Ethernet implementations, preserve the differential pair geometry specified by the interface documentation and use an appropriate PHY, isolation strategy, and connector arrangement. Recheck timing under worst-case temperature and supply conditions.
Do not treat the XMC4400, XMC4300, and XMC4402 order codes as interchangeable solely because they share a 100-lead class and 256 KB flash option. Compare the complete pin-assignment table, analog function routing, timer channels, communications peripherals, package suffix, temperature range, exposed-pad connection, and firmware device configuration. Also confirm the package drawing used by the PCB library. This check is especially important when replacing a part because the processor architecture and flash size match.
Compliance-Informationen
A distributor product record identifies the device as RoHS3 compliant. The manufacturer page describes the XMC4402-F100K256-BA configuration as industrial; an exact automotive qualification grade and the remaining compliance attributes require confirmation from Infineon.