Infineon

XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Teilenummer: XMC4400F100F256BAXQMA1 ✓ Aktiv
3.3 V Vdss PG-LQFP-100 with exposed pad Package 120 MHz Speed 256 KB Memory
MOQ: 1 |

XMC4400F100F256BAXQMA1 Übersicht

Infineon XMC4400F100F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB flash, 80 KB SRAM, Ethernet connectivity, and a 100-pin PG-LQFP package with an exposed pad. The device combines a high-resolution PWM unit with 150 ps resolution and is positioned for real-time HMI, industrial automation, networking, and signal-processing control.

An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the microcontroller and embedded-processing hierarchy. It executes control software, services digital inputs, drives outputs, and manages communication interfaces in equipment that requires deterministic real-time behavior. The XMC4400 combines that processor core with analog, timing, communications, and debugging peripherals intended to reduce external component count in industrial control designs.

Principal device attributes include a 120 MHz Cortex-M4 core, 256 KB program flash, 80 KB SRAM, and Ethernet support. The 150 ps PWM resolution supports precise pulse timing, while the 3.3 V device and industrial temperature designation align it with embedded industrial systems. Its PG-LQFP-100-25 package provides 100 leads and an exposed thermal pad for board-level heat spreading.

The XMC4400 integrates a broad peripheral set around the Cortex-M4 core, including Ethernet and a high-resolution PWM unit. Its memory arrangement provides 256 KB for firmware and 80 KB for working data, making it suitable for control loops, communication stacks, and application logic. The exact peripheral inventory and electrical limits for the selected ordering designation should be confirmed against the Infineon XMC4400 datasheet before schematic release.

Typical uses include industrial Ethernet controllers, programmable logic controllers, real-time human-machine interfaces, digital power conversion, motor-control front ends, and embedded signal-processing systems. Ethernet supports network-connected supervisory equipment, while deterministic PWM and timer resources support precise actuator control. The 120 MHz processing rate also allows control software and communications tasks to coexist without relying on a separate processor.

The most important layout consideration is thermal management around the exposed pad. Follow the manufacturer land-pattern and copper recommendations rather than treating the pad as an optional thermal feature. Decoupling, Ethernet routing, analog grounding, and exposed-pad connection must also follow the pin-description and layout guidance in the Infineon datasheet.

This product page combines the manufacturer ordering information, core memory and operating attributes, application context, engineering design notes, and qualified same-brand comparison parts. It is intended to accelerate component selection while keeping schematic, firmware, and qualification decisions tied to Infineon documentation.

Drop-in-Alternativen für XMC4400F100F256BAXQMA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit XMC4400F100F256BAXQMA1 (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Ethernet Support, Flash Organization, Architecture.

Infineon
Package: 100-LQFP with exposed pad
Flash Organization: 512K x 8
Vergleichen mit XMC4400F100F256BAXQMA1 →
Infineon
Package: PG-LQFP-100
Product Type: 32-bit industrial microcontroller
Architecture: 32-bit
Vergleichen mit XMC4400F100F256BAXQMA1 →
Infineon
Package: PG-LQFP-100-11
Product Type: 32-bit ARM Cortex-M4 microcontroller
Ethernet Support: Integrated Ethernet
Vergleichen mit XMC4400F100F256BAXQMA1 →
Infineon
Package: PG-LQFP-100
Product Type: 32-bit Arm Cortex-M4 microcontroller
Ethernet Support: 10/100 Ethernet MAC
Vergleichen mit XMC4400F100F256BAXQMA1 →

XMC4400F100K256BAXUMA2

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 PG-LQFP-100 with exposed pad
32-bit ARM Cortex-M4 microcontroller · ARM Cortex-M4 · 32-bit RISC · 120 MHz · 256 KB flash (256K x 8) · 80 KB · Integrated Ethernet · 3.3 V

Preis auf Anfrage

Datenblatt ansehen →

XMC4400F100F512BAXQMA1

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 PG-LQFP-100 with exposed pad
32-bit industrial ARM Cortex-M4 microcontroller · ARM Cortex-M4 · 120 MHz · 512 KB · 512K x 8 · 32 bit/16 bit · 10/100 Ethernet MAC · 12 bit

Preis auf Anfrage

Datenblatt ansehen →

XMC4400F100K512BAXQMA1

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 PG-LQFP-100 with exposed pad
32-bit Arm Cortex-M4 microcontroller · XMC4000 · Arm Cortex-M4 · 32 bit · 120 MHz · 512 kB · 512K x 8 bit · 3.3 V

Preis auf Anfrage

Datenblatt ansehen →

XMC4400F100F512BAXUMA1

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Infineon
📦 PG-LQFP-100 with exposed pad
32-bit industrial microcontroller · ARM Cortex-M4 · 32-bit · 120 MHz · 512 KB (512K x 8) · 10/100 Ethernet MAC · XMC4000 · PG-LQFP-100

Preis auf Anfrage

Datenblatt ansehen →

XMC4402-F100K256-BA

✅ Drop-In
📦 PG-LQFP-100 with exposed pad
Retains 256 KB flash, 80 KB SRAM, Ethernet, and 120 MHz operation; peripheral mix differs by 0% in core memory capacity but differs functionally from the XMC4400.

📋 Referenzalternative (nicht im Katalog)

XMC4400F100F256BAXQMA1 Grenzwerte & elektrische Eigenschaften

Product Type 32-bit industrial Arm Cortex-M4 microcontroller
CPU Core Arm Cortex-M4
CPU Clock Frequency 120 MHz
Bit Width 32 bit
Program Flash Memory 256 KB
Flash Organization 256K x 8 bit
SRAM 80 KB
Betriebsversorgungsspannung 3.3 V
Ethernet Support Yes
PWM Resolution 150 ps
Gehäuse PG-LQFP-100 with exposed pad
Lead Count 100 pins
Package Temperature Designation -25 to +125 C grade designation
Product Family XMC4000
Application Classification Industrial
Montageart Surface mount

XMC4400F100F256BAXQMA1 -25 to +125 c grade designation Pinbelegungsleitfaden

Pinbelegung für XMC4400F100F256BAXQMA1 (-25 to +125 c grade designation-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für XMC4400F100F256BAXQMA1 im -25 to +125 c grade designation-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für XMC4400F100F256BAXQMA1.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

XMC4400F100F256BAXQMA1 ist geeignet für 6 Anwendungs: Industrial Ethernet Controller, Real-Time Human-Machine Interface, Digital Power Conversion Control, Motor and Actuator Control, Programmable Automation Controller, Embedded Signal-Processing System.

🌐

Industrial Ethernet Controller

The Infineon XMC4400F100F256BAXQMA1 fits network-connected industrial controllers because it combines an Ethernet interface, a 120 MHz Cortex-M4 core, and 80 KB of SRAM. Firmware can run supervisory logic, protocol processing, diagnostics, and real-time control tasks while the 256 KB flash holds application code and configuration. The 150 ps PWM capability also allows the same controller to supervise precision timing. Board implementation should follow Infineon's Ethernet reference layout, including controlled-impedance routing, suitable termination, magnetics integration, and separation between high-current outputs and sensitive communications circuitry.

📺

Real-Time Human-Machine Interface

The XMC4400F100F256BAXQMA1 is suitable for responsive industrial HMI controllers that combine graphical or touch-panel handling with real-time machine supervision. Its 120 MHz Arm Cortex-M4 core provides processing capacity for interface tasks, while 256 KB of flash accommodates control firmware, graphics resources, and configuration data. Eighty kilobytes of SRAM supports display buffers and communication state, and the high-resolution PWM unit can support synchronized indicator, dimming, or actuator timing. Designers should allocate memory for the graphics stack and use the Infineon pin-description table to assign display and touch-controller interfaces deterministically.

⚡

Digital Power Conversion Control

The XMC4400F100F256BAXQMA1 can serve as the supervisory controller in a digitally controlled power converter. Its 120 MHz Cortex-M4 core executes current and voltage control loops, while the 150 ps PWM resolution enables fine switching-edge placement when the timer resources are configured appropriately. The 256 KB flash holds control firmware and calibration tables, and 80 KB of SRAM accommodates sampled data and control variables. For reliable deployment, account for converter switching noise, keep sensitive analog paths isolated, verify timing against actual clock settings, and follow the exposed-pad copper recommendations for thermal dissipation.

🏭

Motor and Actuator Control

The Infineon XMC4400F100F256BAXQMA1 suits motor-control and actuator-control front ends where deterministic timing and fast supervisory computation are required. The high-resolution PWM unit provides 150 ps timing granularity, while the 120 MHz Cortex-M4 core can process feedback, execute control laws, and coordinate communications. Eighty kilobytes of SRAM supports control variables and diagnostic buffers, and 256 KB of flash is sufficient for many embedded control applications. Use Infineon's timer and pin-assignment guidance to select channel functions, and separate switching-node power stages from low-level sensing and debug signals.

🏭

Programmable Automation Controller

The XMC4400F100F256BAXQMA1 is appropriate for programmable automation equipment that must combine I/O control, communications, diagnostics, and local processing. The industrial XMC4000 positioning supports equipment with defined operating-temperature expectations, while 120 MHz execution and 256 KB flash provide capacity for structured control applications. Ethernet permits integration with plant networks, and the 80 KB SRAM can hold protocol stacks and working state. For deployment, validate every I/O assignment and peripheral multiplex option against the exact ordering designation, and provide robust startup, brownout, watchdog, and field-update behavior.

🧩

Embedded Signal-Processing System

The XMC4400F100F256BAXQMA1 can support embedded signal-processing systems that combine sampling control, filtering, communications, and deterministic output timing. Its 120 MHz Cortex-M4 core performs protocol and supervisory work, the 80 KB SRAM accommodates active buffers, and the 150 ps PWM resolution benefits precision excitation or synchronization. The 256 KB flash provides room for algorithms, calibration, and diagnostics. System partitioning should account for DMA, cache behavior, interrupt latency, and analog front-end bandwidth. Use the Infineon datasheet's electrical and peripheral tables to confirm that each selected sensing and conversion interface is available for this ordering code.

What are the key specifications of XMC4400F100F256BAXQMA1 that engineers should know?
The Infineon XMC4400F100F256BAXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller rated at 120 MHz, with 256 KB flash, 80 KB SRAM, Ethernet connectivity, and a 150 ps PWM resolution. It is packaged in PG-LQFP-100 with an exposed pad and operates from a 3.3 V supply according to the Infineon XMC4400 datasheet. These parameters place it in the XMC4000 family for real-time industrial control, networking, HMI, and signal-processing systems.
What is the operating frequency of XMC4400F100F256BAXQMA1?
The XMC4400F100F256BAXQMA1 operates at 120 MHz. Its 32-bit Arm Cortex-M4 core provides the execution rate used for real-time control algorithms, communications handling, and supervisory logic. Infineon identifies the device as an industrial XMC4000-series microcontroller in the XMC4400 datasheet. The specified clock frequency should be considered alongside the device's configured peripherals and operating-voltage conditions during clock-tree and power-budget reviews.
How much flash and SRAM does XMC4400F100F256BAXQMA1 have?
The Infineon XMC4400F100F256BAXQMA1 provides 256 KB of flash organized as 256K x 8 bit and 80 KB of SRAM. Flash accommodates boot code, application firmware, configuration data, and field-update support, while SRAM supports active control loops, network stacks, and working buffers. The memory figures are identified in Infineon product information and the XMC4400 family documentation. Final memory planning should include the stack, RTOS, bootloader, and update-service requirements.
Which package and exposed-pad arrangement does XMC4400F100F256BAXQMA1 use?
The XMC4400F100F256BAXQMA1 uses a PG-LQFP-100-25 surface-mount package with 100 leads and an exposed thermal pad. The exposed pad is part of the thermal and layout design and should be connected according to the Infineon datasheet land pattern. Use the package drawing and pin-description table to assign signals; do not infer connectivity from a generic 100-pin LQFP footprint.
Why is the 150 ps PWM resolution important for XMC4400F100F256BAXQMA1?
The 150 ps high-resolution PWM capability allows very fine timing control in the XMC4400F100F256BAXQMA1, which is valuable in precision power conversion, high-resolution actuator positioning, and timing-critical signal generation. According to the Infineon XMC4400 documentation, this timer resolution is a defining peripheral feature of the family. Actual output accuracy also depends on the selected clock, prescaler configuration, output channel, and load values used in firmware.
Is XMC4400F100F256BAXQMA1 suitable for industrial Ethernet equipment?
The XMC4400F100F256BAXQMA1 is suitable for industrial Ethernet equipment because it combines an Ethernet-capable XMC4000 platform, a 120 MHz Cortex-M4 core, and 80 KB of SRAM in one industrial device. Infineon identifies Ethernet support in the XMC4400 family information. The board design must still implement the required external Ethernet components, magnetics, termination, and layout specified by the manufacturer.
What can replace XMC4400F100F256BAXQMA1 on the same PCB?
The closest same-brand replacement is an XMC4400-family ordering option with the same 120 MHz class, 256 KB flash, 80 KB SRAM, Ethernet function, and LQFP-100 footprint, subject to firmware and peripheral differences. Infineon offers related XMC4400 ordering designations, but changing a temperature grade, silicon revision, or package suffix can alter qualification and programming details. Verify the complete ordering table and errata before approving a substitution.
Is XMC4400F100F256BAXQMA1 the same as XMC4400F100K256BAXUMA2?
The XMC4400F100F256BAXQMA1 and XMC4400F100K256BAXUMA2 belong to the same XMC4400 industrial microcontroller family and share the principal 256 KB flash, 80 KB SRAM, Ethernet, and 120 MHz architecture. Their complete ordering codes differ, so they must not be treated as automatically identical. Confirm package suffix, temperature grade, silicon revision, qualification, and any errata in the Infineon ordering information before using one as a drop-in replacement.
XMC4400F100F256BAXQMA1 vs XMC4400F100F512BAXQMA1: which is better?
Choose the XMC4400F100F256BAXQMA1 when 256 KB of flash is sufficient and the current XMC4400 hardware configuration is validated. Choose the XMC4400F100F512BAXQMA1 when firmware, logging, or update requirements exceed 256 KB; it provides 512 KB of flash while retaining the XMC4400 family architecture. Both are 120 MHz industrial Cortex-M4 devices with Ethernet and 80 KB SRAM according to Infineon family information, but the larger-flash option should be checked for package and qualification differences.
When should I choose XMC4400F100F256BAXQMA1 over a larger-memory XMC4400 option?
Choose the XMC4400F100F256BAXQMA1 when its 256 KB flash, 80 KB SRAM, Ethernet interface, and 120 MHz Cortex-M4 performance satisfy the application without relying on additional nonvolatile memory. A 512 KB XMC4400 variant is more appropriate when code growth, diagnostics, or dual-image firmware would exceed the 256 KB device. Confirm all peripheral assignments and timing-sensitive functions against the exact Infineon ordering designation.
Is XMC4400F100F256BAXQMA1 suitable for real-time HMI and signal-processing control?
The XMC4400F100F256BAXQMA1 is suitable for real-time HMI and signal-processing control because its 120 MHz Cortex-M4 core, 80 KB SRAM, Ethernet connectivity, and 150 ps PWM resolution support responsive control and data-transfer tasks. Infineon identifies real-time HMI and signal-processing control as XMC4400 application areas. Suitability ultimately depends on task timing, display-interface requirements, memory use, and the control-loop update rate.
Where can I download the XMC4400F100F256BAXQMA1 datasheet PDF?
The official XMC4400 datasheet PDF is available from Infineon at the datasheet link on this product page. It covers the XMC4400 family, including ordering designations, electrical characteristics, physical characteristics, and peripheral descriptions. The XMC4400 reference manual provides deeper register-level information. Use both documents together with any applicable errata when developing firmware and laying out the PG-LQFP-100 board.
Where can I find the XMC4400F100F256BAXQMA1 pinout?
Use the pin-description table and package drawing in the official Infineon XMC4400 datasheet to find the XMC4400F100F256BAXQMA1 pin assignments. The device uses a 100-pin PG-LQFP package with an exposed pad, so a generic LQFP-100 library symbol is not sufficient for final review. Verify every power, ground, analog, digital, clock, debug, and Ethernet connection against the exact ordering designation before fabrication.
How should the XMC4400F100F256BAXQMA1 exposed pad be handled?
The exposed pad on the XMC4400F100F256BAXQMA1 must be handled as a thermal and electrical feature defined by Infineon, rather than as an optional mechanical feature. Follow the datasheet's recommended land pattern, via arrangement, copper fill, and assembly guidance to spread heat from the device and reduce junction temperature. Do not connect the pad to a net unless the package documentation explicitly defines that connection.
Where to buy XMC4400F100F256BAXQMA1 online and what is its lead time?
Use the Request a Quote form on this page to request XMC4400F100F256BAXQMA1 pricing, stock confirmation, lead time, and minimum-order details. Infineon describes the XMC4400-F100F256-BA ordering configuration as an industrial Cortex-M4 device with 256 KB flash, 80 KB SRAM, and Ethernet. Current commercial availability is quote-dependent, so confirm the exact suffix, reel quantity, and delivery schedule before committing a production order.
What is the price of XMC4400F100F256BAXQMA1?
The current price for XMC4400F100F256BAXQMA1 depends on order quantity, packaging suffix, and commercial terms. Submit the Request a Quote form on this page with your required quantity and target delivery location for a current quotation. The manufacturer product information identifies the device as the 256 KB-flash, 80 KB-SRAM, Ethernet-enabled XMC4400-F100F256-BA configuration, allowing the quotation request to identify the exact component unambiguously.

Technische Referenzdaten für XMC4400F100F256BAXQMA1 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the XMC4400F100F256BAXQMA1 for industrial designs that need a 120 MHz Cortex-M4, Ethernet, 256 KB flash, 80 KB SRAM, and 150 ps PWM resolution in a PG-LQFP-100 package. Choose XMC4400F100K256BAXUMA2 when its exact qualification, revision, or ordering status is preferable, but verify all suffix-driven differences before substitution. Choose one of the 512 KB XMC4400 alternatives when firmware, logs, diagnostics, or update images exceed 256 KB. Consider XMC4402-F100K256-BA when its different peripheral mix better matches the design, since matching memory and package alone does not establish functional interchangeability. For every replacement, review the complete Infineon ordering table, electrical limits, pin multiplexing, errata, and firmware initialization requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt XMC4400F100K256BAXUMA2 XMC4400F100F512BAXQMA1 XMC4400F100K512BAXQMA1 XMC4400F100F512BAXUMA1 XMC4402-F100K256-BA
Brand Infineon Infineon Infineon Infineon Infineon Infineon
Package PG-LQFP-100 with exposed pad PG-LQFP-100 with exposed pad PG-LQFP-100 with exposed pad PG-LQFP-100 with exposed pad PG-LQFP-100 with exposed pad PG-LQFP-100 with exposed pad
CPU Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Program Flash 256 KB 256 KB 512 KB 512 KB 512 KB 256 KB
SRAM 80 KB 80 KB 80 KB 80 KB 80 KB 80 KB
Ethernet Support Yes Yes Yes Yes Yes Yes
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

Wichtigste Unterscheidungsmerkmale

  • Matches the 256 KB flash capacity of the related XMC4400 ordering option (vs. XMC4400F100K256BAXUMA2)
  • Provides substantially more nonvolatile memory for expanded firmware (vs. XMC4400F100F512BAXQMA1)
  • Supports larger firmware images in an alternate ordering option (vs. XMC4400F100K512BAXQMA1)
  • Shares the principal memory and networking characteristics of a related XMC4000 controller (vs. XMC4402-F100K256-BA)

Designhinweise

Treat the exposed pad as part of the package's thermal path. Follow the Infineon XMC4400 land pattern, including the recommended pad geometry, via arrangement, and copper area, because a generic LQFP footprint may not reproduce it. Estimate worst-case junction temperature from processor activity, supply voltage, ambient temperature, and board copper rather than relying only on the nominal package designation. Keep exposed-pad vias clear of sensitive analog routing where the recommended layout permits.

Route Ethernet signals as controlled-impedance interfaces and use the reference layout in the Infineon XMC4400 documentation for magnetics, termination, and decoupling placement. Avoid routing switching-node or high-current motor outputs beneath the MCU, analog inputs, or clock circuitry. Keep the 3.3 V supply distribution compact, place local high-frequency bypass capacitance at the appropriate pins, and verify the exposed-pad connection against the package drawing before release to manufacturing.

Build the 3.3 V power budget from the selected operating mode, clock configuration, enabled peripherals, Ethernet activity, and I/O loading rather than from the CPU frequency alone. The 120 MHz core does not imply a constant maximum-current condition, but switching and peripheral states can change demand. Review the Infineon electrical characteristics for each supply domain and use the device's specified decoupling and startup sequence in the reference circuit.

Do not treat every XMC4400 ordering code as firmware- and qualification-identical. Differences in temperature grade, silicon revision, flash size, qualification, or package suffix can affect lifecycle, qualification, or board sourcing even when the LQFP-100 outline is shared. Before replacing the target, compare the complete Infineon ordering table, pin-description table, electrical characteristics, errata, and any required firmware migration steps.

Assign clock, debug, communications, and timing-sensitive pins directly from the Infineon pin-description table for the exact ordering designation. Multiplexing options may move functions between package leads, so a generic XMC4400 symbol can produce routing errors. Review interrupt priorities, timer channels, DMA requests, and peripheral instances in the XMC4400 reference manual, then validate the final clock and pin plan against a firmware initialization trace before PCB signoff.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The XMC4400 is identified as an industrial microcontroller. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was present in the referenced product information, so those fields remain unknown.

Daten verifiziert am: 2026-11-11 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

XMC4400F100F256BAXQMA1 datasheet XMC4400F100F256BAXQMA1 pinout XMC4400F100F256BAXQMA1 datasheet pdf XMC4400F100F256BAXQMA1 specifications XMC4400F100F256BAXQMA1 equivalent XMC4400F100F256BAXQMA1 replacement XMC4400F100F256BAXQMA1 price Infineon XMC4400F100F256BAXQMA1 XMC4400F100F256BAXQMA1 LQFP-100 XMC4400F100F256BAXQMA1 application circuit XMC4400F100F256BAXQMA1 vs XMC4402 XMC4400F100F256BAXQMA1 120MHz Cortex-M4

Verwandte Bauteile & Begriffe

Infineon XMC4400F100F256BAXQMA1 XMC4400-F100F256-BA XMC4400F100K256BAXUMA2 XMC4400F100F512BAXQMA1 XMC4400F100K512BAXQMA1 XMC4400F100F512BAXUMA1 XMC4402-F100K256-BA XMC4000 Arm Cortex-M4 32-bit microcontroller industrial microcontroller embedded processor Ethernet PG-LQFP-100 LQFP package family surface-mount package exposed pad 256 KB flash 80 KB SRAM 120 MHz 150 ps PWM resolution real-time HMI industrial automation signal-processing control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen