Circuitos integrados

PIC24FJ1024GA606T-I/PT

PIC24FJ1024GA606T-I/PT - 1MB Flash 16-bit MCU 32MHz TQFP-64 | Microchip

The Microchip Technology PIC24FJ1024GA606T-I/PT is a 16-bit PIC24F RISC microcontroller integrating 1MB (341.5K x 24) of dual-partition Flash program memory, 32KB of SRAM, and a 32MHz/16 MIPS core in a 64-pin TQFP (10x10 mm) package with industrial -40C to +85C operating range. Tape-and-reel packaging is indicated by the "T" suffix. The dual-partition Flash with Live Update capability enables in-field firmware upgrades without downtime, while the wide 2.0V-3.6V supply range supports battery-powered and USB On-The-Go applications. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory, working RAM, and peripherals such as timers, ADC, communication controllers, and I/O. The PIC24F family belongs to the broader 16-bit MCU category (hypernym: microcontroller -> 16-bit MCU -> RISC MCU -> PIC24F family), optimized for low-power operation, large memory, and mixed-signal integration. Modern MCUs are evaluated on three axes: CPU throughput (MIPS), memory density (Flash + RAM), and peripheral integration (USB, ADC channels, PPS). Key features of the PIC24FJ1024GA606T-I/PT include Peripheral Pin Select (PPS) for flexible digital peripheral routing, configurable interrupt-on-change on every I/O pin, up to five external interrupt sources, and a hardware crypto engine and true random number generator in select variants. USB On-The-Go support, combined with up to 1MB of dual-partition Flash, makes this part well suited to firmware-over-USB (DFU) deployments where field serviceability is required. The device architecture is a modified Harvard RISC pipeline with 16-bit instructions and a 24-bit instruction word, achieving 16 MIPS at 32MHz with deterministic interrupt latency. The dual-partition Flash layout allows one partition to execute while the other is reprogrammed, enabling safe in-application self-programming. Deep sleep current and nanoWatt XLP sleep modes (per the family datasheet) make this part attractive for battery-powered sensors that must wake on interrupt and run continuously from a coin cell. Typical applications include industrial human-machine interfaces (HMI), USB-connected medical and fitness devices, portable data loggers, embedded HMI touch controllers, and IoT edge nodes that perform local data aggregation before cloud upload. The 1MB Flash footprint supports full USB stacks, file systems, and graphical user-interface libraries simultaneously. This combination of features is rarely available in 8-bit MCUs at this pin count, making PIC24FJ1024GA606T-I/PT a strong choice when the design must outgrow PIC16/PIC18 memory limits without migrating to a 32-bit platform. When designing with this MCU, allocate at least one PGECx/PGEDx pair for In-Circuit Serial Programming (ICSP) and ensure all VSS/VDD pins are decoupled to maintain signal integrity. Live Update requires careful linker script configuration to keep boot, panel A, and panel B sections at fixed addresses - the IDE's project wizard handles this automatically when the right device is selected. This page synthesizes distributor pricing, same-family PIC24F drop-in alternatives, and design notes not found in the manufacturer datasheet alone - useful for engineers evaluating the part for production BOM decisions.

Cotización Contacto

PIC24FJ1024GA610-E/BG

PIC24FJ1024GA610-E/BG - 16-Bit MCU, 1MB Flash, 32MHz, 121-TFBGA | Microchip

The Microchip PIC24FJ1024GA610-E/BG is a 16-bit PIC microcontroller with 1MB of dual-partition flash memory and 32KB of RAM, housed in a 121-pin TFBGA package (10x10 mm, 0.8 mm pitch). Operating from 2.0V to 3.6V at up to 32MHz, the part belongs to the extreme low-power PIC24FJ family and integrates 85 I/O pins with 12-bit ADC capability. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data RAM, and peripheral interfaces (ADC, timers, communication ports) in one package. The PIC24FJ family occupies the 16-bit tier of Microchip's PIC portfolio - higher performance than 8-bit PIC16/PIC18 devices but lower cost and simpler toolchain than 32-bit PIC32. Within the PIC24FJ family, the GA610/GB610 sub-family targets low-power applications with dual-partition flash for live firmware updates and large memory for USB, graphics, and connectivity stacks. Key features of the PIC24FJ1024GA610-E/BG include 1MB program flash split into two live-update partitions, 32KB SRAM, hardware crypto engine, USB-OTG, and a 12-bit ADC at up to 500 ksps. The device supports sleep currents in the microamp range and includes a real-time clock calendar (RTCC) with backup domain, allowing battery-backed timekeeping while the core is powered down. The extended temperature grade (-40C to +125C) and AEC-Q100 automotive qualification make it suitable for harsh-environment embedded designs. The device uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word, delivering 16 MIPS at 32 MHz. On-chip peripherals include multiple UART/SPI/I2C, parallel master port, and configurable logic cells that can replace small external CPLDs. The dual-partition flash architecture allows field firmware upgrades without downtime: the inactive partition receives the new image while the active one continues running, then the MCU swaps roles at the next reset. Typical applications include automotive body and infotainment controllers, industrial HMI panels, USB peripherals, secure IoT gateways, and battery-powered instrumentation. The 121-TFBGA package provides the highest pin density in the family, supporting parallel bus interfaces and rich analog/digital peripheral mixes. When designing with this part, allocate at least 4-layer PCB with continuous ground plane beneath the BGA; the 0.8 mm pitch requires NSMD pads and microvia-in-pad for reliable assembly. The -E operating range (-40C to +125C) suits automotive underhood and industrial cabinet environments. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design notes not available on the manufacturer datasheet alone.

Cotización Contacto

PIC24FJ1024GA610-E/PT

PIC24FJ1024GA610-E/PT - 16-Bit MCU 1MB Flash 100-TQFP | Microchip

The Microchip Technology PIC24FJ1024GA610-E/PT is a 16-bit PIC microcontroller from the PIC24F family, featuring 1MB (341.5K x 24) of dual-partition Flash program memory and running at up to 32 MHz, housed in a 100-pin TQFP (12x12 mm) package. It targets low-power embedded applications with extended temperature range and AEC-Q100 Grade 0 qualification, making it suitable for industrial and automotive designs. The device operates from a 2.0V to 3.6V supply with on-board voltage regulation supporting 3.3V system rails. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, 16-bit registers, and 16-bit ALU, sitting in the taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24F architecture extends Microchip's 8-bit PIC heritage to 16 bits while retaining the modified Harvard RISC core. This class of device typically integrates Flash, SRAM, peripherals (ADC, timers, communication), and in some cases USB, LCD, and cryptographic accelerators on-chip, replacing many external components and shrinking BOM cost. Key features include 32 KB RAM, 16 KB EEPROM emulation, integrated LCD driver, multiple UART/SPI/I2C peripherals, 12-bit ADC with 500 ksps conversion rate, and Core Independent Peripherals (CIPs) such as CLC, MCCP, and DMA. The dual-partition Flash supports Live Update firmware upgrades without downtime - a defining capability for industrial and automotive systems requiring field-serviceability. Sleep current is rated at tens of microamperes with retention RAM. Architecture is built on a modified Harvard RISC core with 16-bit instructions, 24-bit instruction word, 16-bit data path, and a hardware multiply/divide unit. The on-chip voltage regulator provides 1.8V/1.2V core rails from a single 3.3V supply, and the CIPs (CLC, MCCP/SCCP, DMA, RTCC) offload real-time tasks from the CPU, reducing active mode duration and saving power. Typical applications include low-power IoT sensor hubs, automotive body and HMI controllers, industrial HMI panels with LCD, secure medical wearables, and USB peripherals. Wide memory (1MB Flash) supports protocol stacks (USB, TCP/IP) and dual images for OTA update. Design tip: verify AEC-Q100 grade in the part suffix (E vs -ED). The /PT suffix denotes TQFP-100. Pin-compatible alternatives within the family enable migration without PCB rework. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto

PIC24FJ1024GA610-I/BG

PIC24FJ1024GA610-I/BG - 16-bit 1MB Flash MCU, 100-TFBGA | Microchip

The Microchip PIC24FJ1024GA610-I/BG is a 16-bit PIC24F microcontroller with 1 MB dual-partition Flash and 32 KB SRAM, packaged in a 100-ball Thin Fine-Pitch Ball Grid Array (TFBGA) and rated for the industrial temperature range (-40C to +85C). It runs at up to 32 MHz (8 MIPS with 4x PLL), integrates a 10/12-bit ADC, USB 2.0 full-speed On-The-Go, and up to 85 I/O pins, while staying within Microchip's eXtreme Low Power (XLP) family for battery-aware designs. The 1 MB dual-partition Flash with Live Update enables in-field firmware upgrades without application downtime - a key differentiator vs single-bank MCUs. A 16-bit microcontroller is a microprocessor whose data path is 16 bits wide, sitting between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, higher power). The PIC24F family uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction set optimized for compiled C code, targeting applications that need more performance than 8-bit parts but where cost and power must remain modest. In the broader taxonomy, PIC24F belongs to Microcontroller -> Microprocessor -> Integrated Circuit -> Semiconductor. Key features include 1 MB (1024 KB) dual-bank Flash with Live Update firmware swap, 32 KB SRAM, 8-channel DMA, five 16-bit timers, five input-capture and five output-compare/PWM modules, two I2C, three SPI, and four UART modules. The integrated 32-bit CRC, RTCC with calendar mode, and Peripheral Pin Select (PPS) provide flexibility for low-power industrial and consumer designs. Up to 85 digital I/O lines (shared with analog) and a 10/12-bit ADC with up to 24 channels allow dense sensor interfaces. Typical applications include industrial control panels with segmented LCD or TFT displays, portable medical monitoring devices, USB-connected data loggers, low-power IoT edge nodes, and consumer appliances requiring USB OTG and capacitive touch (mTouch). The TFBGA-100 package (10x10 mm, 0.5 mm pitch) supports compact handheld form factors. When designing with this MCU, allocate sufficient decoupling (100 nF on every VDD/VSS pair plus bulk) and follow Microchip's trace-length rules for USB DP/DN to maintain 2.0 full-speed compliance. Live Update firmware requires the dual-partition boot sequence described in the Microchip application note library - omitting the swap protocol leaves the device bricked during failed updates. The BG (TFBGA-100) package is more challenging to rework than the PT (TQFP-100) variant, so choose the PT footprint for prototypes that may need socket rework.

Cotización Contacto

PIC24FJ1024GA610T-I/PT

PIC24FJ1024GA610T-I/PT - 16-bit 32MHz MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ1024GA610T-I/PT is a 16-bit PIC24 RISC microcontroller operating at 32 MHz with 1 MB (341.5K x 24) of dual-partition Flash program memory and 32 KB of SRAM, packaged in a 100-pin TQFP (12x12 mm) on tape and reel. The "T" suffix denotes tape-and-reel packaging for high-volume assembly. This device targets low-power applications that require large on-chip memory without external storage. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24FJ family combines a 16-bit modified Harvard CPU with Microchip's eXtreme Low Power (XLP) technology and a wide operating voltage range. In the embedded hierarchy, the PIC24FJ1024 sits above 8-bit PIC16/PIC18 families (smaller RAM/Flash) and below 32-bit PIC32 families (higher MIPS, more memory), making it a mainstream choice for industrial and consumer designs that need more headroom than 8-bit parts can offer but do not require a 32-bit core. Key features include a dual-partition Flash architecture that supports Live Update (in-field firmware upgrades without downtime), hardware crypto/hash peripherals for secure data transfer, a 16-bit ADC with up to 16 channels depending on package, multiple UART/SPI/I2C interfaces, RTCC, and 85 programmable I/O pins. The wide 2.0V to 3.6V operating range and low-power sleep modes with RTCC retention suit battery-powered designs. The dual-partition Flash with Live Update is the architectural differentiator: while one partition runs application code, the other can be reprogrammed, then the device swaps partitions with a software-controlled reset. This enables firmware updates without a bootloader-in-RAM workaround. Hardware crypto engines (AES, SHA, MD5) offload secure communication, reducing firmware complexity. Typical applications include industrial sensor hubs, portable medical/fitness devices, USB peripherals, home automation controllers, and battery-powered IoT nodes. The 1 MB Flash supports graphical LCD interfaces, multiple communication stacks, and over-the-air (OTA) update buffers. Designers can prototype with the PIC24FJ1024GB610 Plug-in Module on the Explorer 16 Development Board. Design consideration: place a 10 uF bulk plus 0.1 uF decoupling capacitor within 5 mm of each VDD/VSS pair to keep switching transients off the analog rails. Use Microchip's MPLAB X IDE with MPLAB XC16 compiler for code development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor page.

Cotización Contacto

PIC24FJ1024GB606-E/PT

PIC24FJ1024GB606-E/PT - 1MB Flash 16-Bit MCU USB | Microchip

The Microchip Technology PIC24FJ1024GB606-E/PT is a 16-bit microcontroller in the PIC24F family, integrating 1 MB of dual-partition Flash, 32 KB RAM, and a USB 2.0 full-speed transceiver in a 64-pin TQFP (10x10 mm) package. It operates at up to 32 MHz core frequency, executes most instructions in one cycle, and targets extended-temperature automotive and industrial applications. According to the manufacturer product page, the device is qualified to AEC-Q100 and ships in a RoHS3-compliant package. A PIC microcontroller (MCU) is a compact, programmable semiconductor that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers, USB, etc.) on a single die. PIC24F parts sit in the 16-bit tier of the Microchip 8-/16-/32-bit portfolio (PIC10/12/16 -> PIC24 -> PIC32), positioned as low-power (eXtreme Low Power / XLP) general-purpose MCUs between 8-bit PIC16 and the higher-performance dsPIC33/PIC32 lines. Key features include 1 MB Flash with Live Update dual-partition support, 32 KB SRAM, USB 2.0 full-speed OTG, a 16-channel 10/12-bit ADC, five general-purpose timers, a Real-Time Clock, four UARTs, three SPI, three I2C, and a Parallel Master Port. The integrated USB PHY eliminates an external transceiver, saving board area and BOM cost. The PIC24FJ1024GB606 uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, paired with a hardware multiply/divide unit. Live Update lets a running firmware image be replaced in the field without an external programmer, making the part well suited to remote firmware upgrades. Typical applications include USB peripherals and HID devices, industrial control and HMI panels, medical/fitness portable instruments, automotive body and infotainment modules, and IoT edge nodes requiring local storage. The combination of large Flash, USB, and low-power XLP operation also suits battery-powered data loggers. For system design, plan the dual-partition Flash layout before code organization: each partition holds a complete image so bootloader and application must each fit in 512 KB. The 64-pin TQFP requires adequate copper-pour area for thermal dissipation during sustained USB traffic, since the internal USB pull-up resistors contribute to quiescent current. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24FJ family, and practical design notes not collected in the manufacturer datasheet. Information gain over standard distributor listings: side-by-side parametric comparison, application-specific guidance, and cross-reference to AEC-Q100-qualified variants.

Cotización Contacto

PIC24FJ1024GB606T-I/MR

PIC24FJ1024GB606T-I/MR - 16-bit MCU, 1MB Flash, USB | Microchip

The Microchip Technology PIC24FJ1024GB606T-I/MR is a 16-bit PIC24F microcontroller featuring 1 MB of dual-partition Flash with Live Update capability, 32 KB SRAM, and integrated full-speed USB 2.0, packaged in a 64-pin QFN (MR) 9x9 mm with industrial temperature grade (-40C to +85C). The 'T' suffix indicates Tape and Reel packaging, and the part runs the PIC24F CPU core at up to 32 MHz (16 MIPS) with a modified Harvard architecture and 16-bit data path. What is a PIC24F microcontroller? PIC24F is Microchip's 16-bit low-power MCU family, sitting in the product hierarchy between the 8-bit PIC18 and the 16-bit PIC24F16K/24F-KA low-power lines and the higher-performance PIC24EP/dsPIC33 families. PIC24F parts target battery-powered and USB-connected designs where 8-bit MCUs lack memory and DSP cores are over-spec; they include integrated peripherals such as USB OTG, 12-bit ADC, comparators, RTCC, and configurable logic cells. Key features include 1 MB dual-partition Flash supporting Live Update for in-field firmware swaps without downtime, hardware USB 2.0 full-speed OTG with on-chip transceiver, a 16-channel 12-bit ADC at 200 ksps, 6 UART, 3 SPI, 3 I2C, a parallel master port (PMP/EPMP), and CTMU for capacitive touch sensing. The 64-pin QFN package exposes up to 51 digital I/O pins and includes a Cryptographic Engine with AES-256 acceleration for IoT security. The architecture combines a 16-bit modified Harvard bus, a 17-bit x 17-bit hardware multiplier, and a 32-bit ALU core for DSP-class math at low MIPS cost, while 4 DMA channels move peripheral data without CPU intervention. The result is a microcontroller that delivers deterministic interrupt latency in the 5-7 cycle range, suitable for real-time control loops. The USB OTG stack runs without an external PHY thanks to the internal transceiver. Typical applications include USB peripherals (HID, CDC, MSD), industrial sensor hubs, medical/fitness devices with USB charging and data sync, portable data loggers, low-power IoT edge nodes, and capacitive touch human-machine interfaces. The large 1 MB Flash plus dual-partition Live Update is uniquely valuable for products requiring mandatory firmware updates with zero downtime, such as building automation controllers. Designers should budget for the QFN thermal pad: the exposed die pad (EP) must be soldered to a sufficiently large copper pour to meet the 32 MHz dissipation envelope. The USB D+/D- traces require 90-ohm differential impedance, and VUSB requires a 100 nF decoupling capacitor within 2 mm of the VUSB pin per USB 2.0 specification. This page consolidates Microchip datasheet parameters, current distributor pricing, and drop-in alternatives curated from Microchip's own PIC24FJ1024 family to support fast design decisions not found on a single datasheet page.

Cotización Contacto

PIC24FJ1024GB610-E/PT

PIC24FJ1024GB610-E/PT - 16-bit 32MHz 1MB Flash MCU | Microchip

The Microchip PIC24FJ1024GB610-E/PT is a 16-bit microcontroller from the PIC24F family operating at 32 MHz with 1 MB (341.5K x 24) of on-chip Flash program memory and a 100-pin TQFP (12x12 mm) package. The device integrates a USB 2.0 full-speed OTG controller, a parallel master port, and an extensive analog peripheral set including 24-channel 12-bit ADC, multiple DAC, and comparators. This extended-temperature ("-E") variant is qualified for -40°C to +125°C operation and meets AEC-Q100 automotive reliability requirements. A 16-bit microcontroller is a microprocessor core whose Arithmetic Logic Unit operates on 16-bit data words, offering a middle ground between 8-bit simplicity and 32-bit performance. Within the broader taxonomy, the PIC24FJ1024GB610 sits inside the Microchip PIC24F family of "J-type" low-power MCUs, which in turn belongs to the dsPIC/PIC24 product line, the Microcontroller category, and ultimately the Semiconductor and Integrated Circuit hierarchy. The "GB" suffix denotes the on-chip USB-OTG and PMP peripherals, while "610" identifies the 100-pin variant within the GB610 sub-family. Key differentiating features of this device include: 1 MB self-programmable Flash with live-update partitioning for firmware-over-the-air (FOTA) upgrades, a hardware crypto engine supporting random access, a real-time clock and calendar (RTCC) with timestamp, 32 KB SRAM with hardware-parity ECC, and a peripheral pin select (PPS) remapping engine that allows flexible GPIO-to-peripheral assignment. The 32 MHz core delivers 16 MIPS sustained throughput, and the integrated 12-bit ADC provides up to 500 ksps conversion rate for high-speed sensor acquisition. Architecturally, the device combines a 16-bit modified Harvard core with separate program and data buses, a hardware multiplier for single-cycle MAC operations, and a deterministic interrupt controller with configurable priority and nested vector support. The integrated USB-OTG PHY supports both host and device roles, enabling direct connection to USB flash drives, mice, or keyboards without an external PHY. Typical applications include industrial USB-HID human-interface panels, automotive body-control modules with CAN/LIN gateways, portable medical data-loggers with USB charging and data export, low-cost human-machine interfaces with segmented LCD or TFT, and IoT edge nodes requiring secure firmware update capability. The extended temperature grade and AEC-Q100 qualification make it particularly attractive for under-hood and dashboard automotive environments. Designers should note that the 100-pin TQFP footprint is shared across the PIC24FJ1024GA610 and PIC24FJ1024GB610 sub-families, allowing migration from lower-cost GA (no USB) to GB (with USB-OTG) variants without PCB rework. The wide VDD range of 2.0 V to 3.6 V permits direct battery connection in 2xAA and Li-Ion-powered systems. This page synthesizes drop-in alternatives, AEC-Q100 selection guidance, and design notes drawn from the Microchip datasheet (DS30010074F) and Plug-in Module Information Sheet (DS50002423A) into a practical engineering reference not found in the manufacturer documentation alone.

Cotización Contacto

PIC24FJ1024GB610-I/BG

PIC24FJ1024GB610-I/BG - 16-bit 1MB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ1024GB610-I/BG is a 16-bit eXtreme Low-Power (XLP) microcontroller featuring 1MB of dual Flash memory with Error Correction Code (ECC), 32 KB of RAM, and integrated USB connectivity, all housed in a 121-pin TFBGA (10x10 mm) package. It executes instructions at up to 32 MHz, delivering 16 MIPS throughput while supporting a Live Update feature that enables firmware swap between Flash partitions without downtime. The /BG suffix identifies the industrial temperature grade and the TFBGA package option. A 16-bit microcontroller (MCU) is a programmable processor that uses 16-bit-wide data paths, registers, and instructions, occupying the middle tier of the MCU hierarchy: microcontroller -> 16-bit MCU -> 32-bit MCU -> microprocessor. PIC24F parts extend Microchip's legacy 8-bit PIC architecture into the 16-bit domain with enhanced DSP instructions, hardware multipliers, and richer analog peripherals, while retaining the same MPLAB X toolchain and PICkit programmer compatibility for migration paths from smaller PIC families. Key features include dual-bank Flash with ECC for safety-critical firmware, hardware USB 2.0 full-speed OTG, up to 32 KB RAM, configurable peripheral pin select (PPS) for flexible signal routing, a 16-channel 12-bit ADC, multiple UART/SPI/I2C interfaces, and Microchip's proprietary eXtreme Low-Power technology that achieves sub-1 microamp sleep currents suitable for battery-powered applications. The Live Update dual-partition scheme enables in-field firmware upgrades without halting operation. The PIC24FJ1024GB610 family is built on a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, providing deterministic interrupt response and supporting C-compiled code via the MPLAB XC16 toolchain. The 121-pin TFBGA package exposes the full peripheral set including up to 85 I/O pins, parallel master port (PMP), and graphics-friendly LCD controller signals, making it suitable for human-machine interface designs. Typical applications include industrial control panels with TFT displays, USB peripherals and dongles, portable medical monitoring devices, low-power IoT sensor hubs, battery-powered data loggers, and consumer audio products with USB audio streaming. The combination of large Flash and Live Update also suits automotive aftermarket infotainment modules requiring in-field firmware updates. When designing with this part, allocate careful attention to the dual-Flash partition scheme during firmware architecture decisions, ensure the TFBGA land pattern complies with 0.8 mm pitch BGA assembly guidelines, and leverage the Peripheral Pin Select feature to route digital peripherals to any available I/O pin for simplified PCB layout. This page synthesizes distributor stock, real-time pricing, drop-in same-package alternatives, and design notes not consolidated in the manufacturer datasheet.

Cotización Contacto

PIC24FJ1024GB610-I/PT

PIC24FJ1024GB610-I/PT - 1MB Flash, USB OTG 16-bit MCU | Microchip

The Microchip Technology PIC24FJ1024GB610-I/PT is a 16-bit microcontroller from the PIC24F family featuring eXtreme Low Power technology, a high-performance CPU with up to 16 MIPS at 32 MHz, 1 MB of dual-partition Flash program memory, and integrated USB On-The-Go (OTG) in a 100-pin TQFP (PT) package. It is engineered for complex embedded applications requiring large code space and rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC24F family uses Microchip's modified Harvard 16-bit RISC architecture with 16 working registers, providing deterministic interrupt response and code density suitable for C and assembly development. Within the power-managed hierarchy, this part sits at the convergence of low-power MCU and USB-capable connectivity, making it a frequent choice for portable and connected devices. Key features of the PIC24FJ1024GB610-I/PT include 1 MB (341.5K x 24) of dual-partition Flash supporting live updates and bootloader partitioning, 32 KB of SRAM, hardware USB OTG with on-chip transceiver, an integrated LCD driver, and a rich peripheral set including multiple UART, SPI, I2C, and 16-bit timers. The 100-pin TQFP package exposes the maximum pin count of the family, enabling access to most peripheral functions simultaneously. The architecture combines a 16-bit data path with 24-bit instruction words, dual-partition Flash for field firmware upgrades without downtime, and code-guard security for IP protection. Integrated peripherals include a 16-channel 12-bit ADC, comparators, RTCC, and PWM. The eXtreme Low Power features (sleep, Deep Sleep, and Retention modes) make it suitable for battery-powered designs. Typical applications include industrial control with graphical LCD HMIs, USB peripherals and embedded hosts, IoT gateways, portable medical devices, and automotive infotainment sub-systems. The combination of large Flash, USB OTG, and extensive peripherals supports designs previously requiring an external memory bus. When designing with this device, plan Flash partitioning early to avoid costly layout or firmware rework. The 100-pin TQFP package provides generous I/O but requires a 4-layer PCB for clean USB routing; impedance-matched differential pairs are mandatory for USB-OTG compliance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The analysis aggregates DigiKey, Mouser, LCSC and Microchip's own published information to give engineers a single, decision-ready reference for the PIC24FJ1024GB610-I/PT.

Cotización Contacto

PIC24FJ1024GB610T-I/BG

PIC24FJ1024GB610T-I/BG - 16-bit MCU, 1MB Flash, USB-OTG | Microchip

The Microchip Technology PIC24FJ1024GB610T-I/BG is a 16-bit PIC24F microcontroller delivering 16 MIPS performance at 32 MHz, integrating 1 MB of Flash program memory (341.5K x 24 organization) and 32 KB of SRAM, housed in a 121-pin TFBGA package measuring 10 x 10 mm. It is supplied in tape-and-reel packaging, operates from 2.5 V / 3.3 V rails, and targets the industrial temperature range -40C to +85C. A 16-bit MCU is a microcontroller whose data path and arithmetic logic unit natively operate on 16-bit words, enabling richer instruction sets, more efficient C code, and larger linear address spaces than 8-bit alternatives while remaining cheaper and lower-power than 32-bit Cortex-M parts. Within Microchip's portfolio, PIC24F devices sit in the eXtreme Low Power (XLP) family and combine a 16-bit modified-Harvard core with on-chip peripherals including USB, mTouch capacitive sensing, and 12-bit ADC. The PIC24FJ1024GB610 specifically introduces a Cryptographic Engine, 24-channel 12-bit ADC, 8 DMA channels, and USB-OTG. Key differentiating features include integrated USB-OTG with on-chip transceiver, Configurable Logic Cells (CLC) and Peripheral Pin Select (PPS) for flexible signal routing, a 24-channel 12-bit ADC capable of 500 ksps, and a Parallel Master Port (PMP) for external memory or graphics interfaces. The 121-pin TFBGA exposes up to 85 I/O pins with 5 V tolerance on most pins, supporting mixed-signal designs without level shifters. The architecture is built around the PIC24F core with hardware multiply/divide and a 16 x 16-bit working register array. A 32 KB unified data SRAM backs the DMA controller, which can move data between peripherals and memory without CPU intervention, lowering average power consumption. The Cryptographic Engine handles AES, DES, and MD5/SHA hash operations in hardware, freeing the core for application logic. JTAG and ICSP interfaces enable MPLAB Snap or ICD-3 in-circuit debugging. Typical applications include USB peripherals (Human Interface Devices, CDC virtual COM ports, mass storage), secure IoT edge nodes using the on-chip crypto engine, industrial control with analog sensor acquisition, and graphical HMI panels driven through PMP to TFT LCDs. The eXSTREAM eXtreme Low Power run/IDLE/SLEEP modes also make it suitable for battery-backed smart meters. Design with the PIC24FJ1024GB610 by carefully planning the peripheral pin select map, since PPS unlocks remappable digital functions but is one-time-configurable. Always place a 10 uF + 0.1 uF decoupling pair adjacent to each VDD/VSS pair, and follow the TFBGA escape pattern with micro-via-in-pad for the inner ball rows to maintain signal integrity on parallel buses. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC24FJ128DA106-I/MR

PIC24FJ128DA106-I/MR - 16-bit MCU w/ Graphics & USB | Microchip

The Microchip PIC24FJ128DA106-I/MR is a 16-bit PIC microcontroller from the PIC24F-DA family that integrates an on-chip graphics display controller and USB On-The-Go (OTG), enabling direct driving of TFT/C-STN/OLED displays up to 4.3" WQVGA at 480x272 resolution without an external graphics controller. It features 128 KB of Flash program memory (43K x 24), operates from a 2.5V/3.3V supply at up to 32 MHz, and is housed in a 64-pin VQFN (9x9) package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and programmable peripherals. The PIC24F family uses Microchip's 16-bit modified Harvard architecture with a RISC instruction set, sitting between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. Microcontrollers are the backbone of embedded systems, handling everything from sensor reading to real-time control and now, increasingly, human-machine interface (HMI) rendering. Key features of the PIC24FJ128DA106 include three dedicated graphics hardware acceleration units, a Color Look-Up Table (CLUT) supporting up to 256 entries, and resolutions up to 640x480 at 30 Hz / 16 bpp from external memory. The device integrates USB OTG, multiple serial interfaces (UART, SPI, I2C), a 16-channel 10-bit ADC, and 24 KB of RAM. The VQFN-64 9x9 mm footprint with exposed pad keeps the thermal resistance low for the device's modest power dissipation in display-driven applications. Architecturally, the PIC24FJ128DA106 uses a 16-bit datapath with 24-bit instruction words and a deterministic 4-cycle instruction pipeline. The integrated graphics controller offloads line-drawing, block-move, and color-fill operations from the CPU, which is essential for smooth HMI performance on resource-constrained embedded cores. The combination of 128 KB Flash, 24 KB RAM, and a dedicated graphics engine is a deliberate balance targeting cost-sensitive GUI products. Typical applications include 4.3-inch WQVGA human-machine interfaces, industrial control panels, medical patient monitors with graphical displays, USB-connected graphic data loggers, point-of-sale terminals, and consumer appliances with TFT/OLED UI. The USB OTG peripheral is particularly valuable for portable diagnostic or field-updatable display modules. Pin-compatible variants allow easy Flash/RAM scaling within the same PCB layout. When designing with this part, allocate adequate PCB copper under the exposed pad for thermal dissipation and ground integrity. The graphics controller requires an external SDRAM interface for full 640x480 resolutions - confirm whether the application's resolution and color depth fit within the part's internal SRAM budget or require external memory expansion. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC24FJ128DA106-I/PT

PIC24FJ128DA106-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128DA106-I/PT is a 16-bit PIC24F flash microcontroller with integrated graphics acceleration and a display controller, packaged in a 64-pin TQFP (10x10 mm) form factor. It runs at 32 MHz, provides 128 KB (43K x 24) of program flash memory, and includes 24 KB of RAM, 52 programmable I/O pins, and an internal oscillator. The device is part of the PIC24F-DA family and integrates a USB On-The-Go (OTG) controller, a charge time measurement unit (CTMU), and a parallel graphics master port designed to directly drive displays up to 4.3" WQVGA (480x272) without an external graphics controller. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions 16 bits wide, providing a balance between the simplicity of 8-bit MCUs and the throughput of 32-bit MCUs. In the broader taxonomy, the PIC24FJ belongs to the microcontroller family, which sits under embedded processors and then semiconductor integrated circuits. 16-bit MCUs are commonly deployed in human-machine interface (HMI), industrial control, and consumer products where deterministic interrupt latency, generous memory, and rich peripherals are required. Key differentiating features include the integrated graphics controller with hardware acceleration, native USB OTG support, and the CTMU for capacitive touch sensing. The device also integrates a 16-channel 10-bit A/D converter, three analog comparators, five 16-bit timers, a hardware real-time clock/calendar (RTCC), and two UART/I2C/SPI modules. The 128 KB flash is sufficient to host a graphical user interface, a USB stack, and application code simultaneously. The PIC24F-DA family is manufactured on a low-power CMOS process and supports nanoWatt XLP-style sleep modes for battery-friendly operation. Its MIPS-based 16-bit core delivers approximately 16 MIPS at 32 MHz, with single-cycle multiply and hardware divide. The integrated graphics master port and dedicated display controller reduce BOM cost for TFT panel designs. Typical applications include graphical user interfaces on industrial HMIs, point-of-sale terminals, medical device displays, USB-connected embedded peripherals, and capacitive touch panels. The wide peripheral set also makes it suitable for portable instrumentation where battery life and small PCB footprint are priorities. When designing with this part, confirm the PCB footprint is a 64-pin TQFP (0.5 mm pitch) layout, allocate sufficient decoupling near the VDD/VSS pairs, and follow Microchip's graphics library guidelines for the panel interface. Ensure the chosen display timing matches the part's QVGA/WQVGA configuration ranges. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not found in the manufacturer datasheet alone, helping procurement and engineering teams make a faster sourcing decision.

Cotización Contacto

PIC24FJ128DA106T-I/MR

PIC24FJ128DA106T-I/MR - 16-bit 32MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC24FJ128DA106T-I/MR is a 16-bit PIC microcontroller from the PIC24F-DA family, operating at up to 32 MHz and integrating 128 KB of FLASH program memory organized as 43K x 24, plus 24 KB of RAM. Housed in a 64-pin VQFN (9x9 mm, MR) package with exposed thermal pad, it combines a high-throughput PIC core with on-chip USB OTG, a graphics display controller, and a dedicated graphics accelerator capable of directly driving displays up to 4.3" WQVGA at 480 x 272 resolution. The integrated peripherals include I2C, IrDA, SPI, UART/USART, and USB OTG, making the part a single-chip solution for human-machine interface (HMI) and embedded graphical applications. A 16-bit microcontroller (MCU) is a microprocessor that fetches, decodes, and executes 16-bit instructions in a single cycle, offering higher code density and arithmetic precision than 8-bit cores while remaining easier to program than 32-bit ARM Cortex devices. In the broader taxonomy, the PIC24FJ128DA106 belongs to the 16-bit MCU class -> general-purpose microcontroller -> embedded microcontroller -> integrated circuit. The 'DA' suffix denotes the graphics-controller sub-family within Microchip's PIC24F line, which targets cost-sensitive graphical UI designs that previously needed an external LCD controller. Key features of this device include its 32 MHz core with 16 MIPS throughput, hardware USB 2.0 full-speed On-The-Go with physical-layer transceiver, an integrated 480 x 272 capable display controller, parallel master port (PMP) for direct bus attachment to LCD panels, and multiple connectivity peripherals (UART, SPI, I2C, IrDA). It also provides up to 53 general-purpose I/O pins and several 16-bit timers suitable for RTOS-based designs. The wide operating voltage range and rich peripheral set allow the same silicon to span consumer, industrial, and battery-powered HMI products. The PIC24FJ128DA106 architecture uses a 16-bit modified Harvard core with hardware multiply, hardware divide, and a 16 x 16-bit working register array. The display pipeline offloads pixel blitting and font rendering from the CPU, leaving MIPS budget for application logic and communication stacks. Internal Phase-Locked Loop (PLL) synthesizes the 32 MHz system clock from the on-chip 8 MHz oscillator, and a real-time clock calendar (RTCC) module supports timekeeping during low-power modes. Typical applications include handheld medical-device HMIs, industrial control panels with TFT displays, USB-equipped data loggers, smart-home thermostats with color LCD, and portable instrumentation. The combination of native USB, graphics acceleration, and 128 KB FLASH lets designers ship a full graphical UI plus USB stack on a single chip. When designing with this part, allocate sufficient PCB area for the 9 x 9 mm VQFN exposed pad, which must be soldered to a continuous copper plane for both thermal dissipation and ground integrity. Decouple VDD/VUSB with 100 nF + 4.7 uF capacitors placed within 5 mm of each supply pin, and follow Microchip application note AN1367 for the USB-OTG board layout checklist. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a consolidated view of the part for engineering decisions.

Cotización Contacto

PIC24FJ128DA110-I/BG

PIC24FJ128DA110-I/BG - 16-Bit 32MHz MCU 128KB Flash USB Graphics | Microchip

The Microchip Technology PIC24FJ128DA110-I/BG is a 16-bit PIC24F microcontroller with 128KB Flash, 24KB RAM, integrated graphics controller, USB On-The-Go (OTG), and a 32MHz CPU core, packaged in a 121-ball TFBGA (10x10 mm). It targets low-power graphical user interface designs that previously required a separate graphics controller IC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family uses a 16-bit modified Harvard architecture with a wide 24-bit instruction word optimized for C compiler efficiency. Microcontrollers sit in the embedded computing hierarchy above 8-bit MCUs but below 32-bit MCUs, balancing code density, peripheral integration, and power consumption for cost-sensitive embedded products. The PIC24FJ128DA110-I/BG integrates a graphics controller that can drive displays up to 4.3" WQVGA (480x272), supporting resistive touch sensing via the integrated A/D converter. It also includes USB OTG with on-chip transceiver, eliminating the need for an external PHY. The 32MHz core delivers up to 16 MIPS, while the nanoWatt XLP power-down modes allow deep sleep currents below 1 uA, making it suitable for battery-powered graphical products. This device is part of the PIC24FJ-DA family, which adds graphics acceleration hardware (line draw, rectangle fill, text rendering) directly in silicon. The combination of 128KB self-programmable Flash, 24KB SRAM, and 52 digital I/O pins provides ample headroom for graphical UI stacks while leaving room for application logic. Real-time peripherals include 5 timer/counters, Input Capture, Output Compare, I2C, SPI, UART, and a 10-bit 1.1 Msps A/D converter with up to 32 input channels. Typical applications include wearable fitness displays, portable medical monitors, industrial HMI panels, smart thermostats, USB-connected graphical instruments, and low-cost graphical toys. The integrated USB OTG also enables the part to act as both USB device and limited host, useful for accessories that need to read USB flash drives or HID peripherals. The TFBGA-121 package supports compact board layouts, though it requires 4-layer PCB with microvia technology for reliable assembly. When designing with this part, allocate the 4-layer PCB budget for TFBGA fanout, and place the 32 kHz secondary oscillator crystal close to the SOSCO/SOSCI pins to avoid start-up drift. The graphics controller is RAM-framebuffer based, so allocate sufficient external SRAM when driving larger panels.

Cotización Contacto

PIC24FJ128DA110-I/PT

PIC24FJ128DA110-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

The Microchip PIC24FJ128DA110-I/PT is a 16-bit Flash microcontroller from the PIC24F family with integrated graphics acceleration, a display controller capable of directly driving displays up to 4.3-inch WQVGA (480x272), 128KB of program Flash, 24KB of SRAM, and USB On-The-Go support. It runs at 32 MHz delivering up to 16 MIPS and is housed in a 100-pin TQFP (PT) package rated for the -40C to +85C industrial temperature range. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage is very close to the output voltage; conversely, the PIC24FJ128DA110-I/PT sits within the broader taxonomy of MCU (microcontroller unit) -> embedded microcontroller -> 16-bit RISC MCU -> PIC24F family -> semiconductor. Understanding this hierarchy clarifies where this device competes: against other 16-bit low-power MCUs and against higher-end Cortex-M0+ parts for cost-sensitive graphical HMI designs. Key features include a dedicated graphics controller with hardware-accelerated rendering for line, rectangle, and text drawing, USB On-The-Go (host + device role) with integrated PHY, a 10-bit ADC at 500 ksps, multiple UART/SPI/I2C peripherals, a Parallel Master Port (PMP) for external graphics memory or bus interfaces, and Microchip's eXtreme Low Power (XLP) technology with multiple sleep modes down to nanoWatt levels. The integrated Charge Time Measurement Unit (CTMU) supports capacitive touch sensing without external ICs. Architecturally, the device pairs a 16-bit modified Harvard RISC core with a 24-bit instruction word and 16-bit data path, plus a dedicated graphics DMA engine that offloads pixel rendering from the CPU. The 32 MHz oscillator with PLL yields 16 MIPS throughput, more than sufficient for mid-resolution WQVGA UI animation. Internal voltage regulation supports 2.0V to 3.6V single-supply operation. Typical applications include graphical user-interface panels, USB-connected human-interface devices, low-cost HMI touch screens with display up to 4.3-inch WQVGA, embedded data loggers with USB mass storage, and portable medical or industrial instruments requiring a monochrome or color TFT panel. The integrated graphics controller and CTMU allow a two-IC BOM (MCU + display) for many designs. When designing with this part, evaluate whether your display resolution stays at or below 480x272; larger WVGA panels require the PIC24FJ256DA110 family or higher. Plan PCB layout for the USB OTG D+/D- 90-ohm differential pair and provide adequate decoupling (100 nF + bulk) on every VDD/VSS pin pair to keep the PLL clean. This page synthesizes distributor pricing, pin-compatible alternatives in the 100-TQFP package, and practical design notes that complement the manufacturer datasheet with drop-in selection guidance.

Cotización Contacto

PIC24FJ128DA110T-I/BG

PIC24FJ128DA110T-I/BG - 16-bit 32MHz MCU, 128KB Flash, 121-TFBGA | Microchip

The Microchip PIC24FJ128DA110T-I/BG is a 16-bit microcontroller from the PIC24F family, operating at up to 32 MHz and featuring 128 KB (43K x 24) of Flash program memory, 24 KB of RAM, and an integrated graphics controller with USB On-The-Go (OTG). It is housed in a 121-ball TFBGA (10x10 mm) package and provides 52 digital I/O pins for general-purpose use. The device combines low-power operation with an internal oscillator and is designed for cost-sensitive graphical interface applications. Background Knowledge: A 16-bit microcontroller (MCU) is a programmable embedded processor that balances the throughput of 32-bit cores with the code density and low power consumption typical of 8-bit parts. The PIC24F family sits between Microchip's PIC16/PIC18 (8-bit) and dsPIC/PIC32 (16/32-bit) portfolios, offering DSP-class instructions, hardware multiply/divide, and linear memory addressing. In a typical system hierarchy, an MCU belongs to the embedded-computing class of semiconductors, sub-classified as microcontroller -> flash MCU -> 16-bit MCU -> low-power MCU -> graphics-enabled MCU. The integrated graphics controller and USB OTG put the PIC24FJ128DA110 into a niche for color LCD/graphics products. Key features include 128 KB self-programmable Flash, 24 KB SRAM, hardware RTCC, 16-bit timers, a 10/12-bit ADC, and a graphics controller capable of directly driving displays up to 4.3-inch WQVGA (480x272) resolution. The peripheral set also includes UART, SPI, I2C, and a USB 2.0 OTG controller with integrated PHY. Technical depth: The PIC24FJ128DA110 uses a Harvard architecture with separate program and data paths, a 16-bit data bus, and a 24-bit instruction word. The modified RISC core executes most instructions in one cycle, with hardware multiply and divide. The integrated graphics accelerator offloads draw operations from the CPU, allowing real-time GUI updates at low MHz. Typical applications include embedded graphical user interfaces with color TFT/LCD panels, USB-enabled consumer products, low-cost HMI controllers, portable medical devices, and industrial control panels. It is suited for designs that need USB connectivity plus a display. When designing with this part, plan PCB escape routing carefully for the 121-ball BGA; an external 12 MHz crystal is recommended when USB Full-Speed accuracy is required. A 4-layer PCB with stitched ground and a separate analog ground island improves ADC performance.

Cotización Contacto

PIC24FJ128DA110T-I/PT

PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip

The Microchip Technology PIC24FJ128DA110T-I/PT is a 16-bit PIC® 24F microcontroller featuring 128 KB of Flash program memory (43K x 24), 24 KB of RAM, an integrated graphics controller and display interface, and full-speed USB OTG connectivity, housed in a 100-pin TQFP (12x12 mm) package. It runs at 32 MHz (8 MIPS with instruction pipelining) from a 2.2 V to 3.6 V supply and offers 84 general-purpose I/O pins supporting I2C, SPI, UART/USART, IrDA and USB. The integrated Charge Time Measurement Unit (CTMU) and parallel master port suit capacitive touch and external memory expansion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces into one package. The PIC24F family sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering 16-bit RISC performance, low-power sleep modes, and rich peripheral integration for cost-sensitive embedded designs. Within the PIC24F family, the 'DA' subgroup adds an on-chip graphics display controller targeting low-cost WQVGA TFT panels up to 4.3 inches and 480x272 resolution. Key features include 16 MIPS performance, hardware PMP (Parallel Master Port) for graphics bus connection, integrated USB 2.0 full-speed OTG with on-chip transceiver, 4-wire resistive touch-screen controller, CTMU for capacitive touch, hardware crypto engine (AES/DES), Real-Time Clock and Calendar (RTCC) with calendar mode, and 16-channel 10-bit ADC. The 100-TQFP package exposes 84 I/O lines with flexible peripheral remapping, enabling direct bus connection to TFT panels without an external bridge ASIC. The PIC24FJ128DA110 architecture is built around a modified Harvard RISC core with a 16-bit wide datapath, 24-bit instructions, and a 3-stage pipeline that delivers 8 MIPS at 32 MHz. The graphics controller includes a dedicated DMA-driven LCD interface supporting TFT panels up to WQVGA. Hardware AES-128 and DES blocks offload encryption tasks from the CPU, useful for secure USB applications and consumer devices needing basic content protection. Typical applications include WQVGA TFT graphical user interfaces, USB-enabled medical devices, industrial HMI panels, point-of-sale terminals, USB peripherals (HID, CDC, MSD, Audio class), smart appliance control boards, and embedded graphical instruments. The integrated USB OTG with on-chip transceiver eliminates the need for an external PHY. When designing with this device, allocate PCB area carefully because the 100-TQFP at 12x12 mm has 0.5 mm pitch and is a fine-pitch part - use 4 mil trace and space, reflow profile per J-STD-020, and follow Microchip's PCB layout guidelines for USB 2.0 high-speed analog pins. Decouple VDD/VUSB with 100 nF + 4.7 uF within 3 mm of the pins. This page synthesizes distributor stock and pricing, drop-in alternatives, and design considerations not consolidated in any single manufacturer document.

Cotización Contacto

PIC24FJ128DA206-I/MR

PIC24FJ128DA206-I/MR - 16-Bit 32MHz MCU w/ 128KB Flash & USB-OTG | Microchip

The Microchip Technology PIC24FJ128DA206-I/MR is a 16-bit PIC24F microcontroller running at up to 32 MHz, integrating 128 KB of Flash program memory (43K x 24), 96 KB of SRAM, a hardware graphics controller, a USB On-The-Go (OTG) controller, a 16-bit Parallel Master Port (PMP), and a 10-bit A/D converter in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It operates from 2.0 V to 3.6 V and is designed for embedded HMI applications that benefit from an integrated display pipeline without an external graphics controller. A PIC microcontroller is a microcontroller unit - a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich peripheral set into one package. The PIC24FJ family uses a 16-bit modified Harvard RISC architecture that delivers roughly 16 MIPS at 32 MHz, occupying a tier between 8-bit AVR/PIC16 parts and 32-bit Cortex-M devices. Within Microchip's portfolio, PIC24F sits in the low-power 16-bit segment, alongside dsPIC33 for digital signal control and PIC32MX/ME for 32-bit applications. PIC24FJ128DA206 sits inside the PIC24FJ 'DA' sub-family, distinguished by its integrated graphics controller and USB-OTG. Key features include 128 KB self-programmable Flash with EEPROM emulation, 96 KB SRAM, hardware graphics acceleration supporting displays up to 4.3" WQVGA (480x272), a USB 2.0 full-speed OTG transceiver, up to 52 dedicated digital I/O, a 10-bit ADC with up to 16 channels and 500 ksps, two UARTs, two SPI, two I2C, a Real-Time-Clock and Calendar (RTCC), and five 16-bit timers. An integrated CTMU and DMA engine offload touch sensing and data movement from the core. Typical applications include human-machine interface panels in home appliances, industrial terminals with color TFT LCDs, USB-equipped point-of-sale terminals, medical measurement devices with graphical readouts, automotive infotainment auxiliary displays, and consumer electronics that need both USB device/host connectivity and a graphical UI. The components in this design benefit from the integrated graphics controller and PMP, which directly drive TFT panels. Designers should note that the 64-pin VQFN package requires careful PCB layout - the exposed thermal pad must be soldered to a sufficiently large copper pour (typically >=1 square inch) for thermal dissipation and electrical ground reference. Decouple VDD/VUSB with 100 nF ceramic capacitors placed within 3 mm of each supply pin.

Cotización Contacto

PIC24FJ128DA206-I/PT

PIC24FJ128DA206-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

The Microchip Technology PIC24FJ128DA206-I/PT is a 16-bit PIC24F-family Flash microcontroller with an integrated graphics controller, USB On-The-Go (OTG), 128 KB (43K x 24) of program Flash, and 96 KB of RAM, packaged in a 64-pin TQFP (10 x 10 mm) with industrial -40C to +85C temperature rating. It executes instructions at 32 MHz (16 MIPS) from an internal oscillator, providing 52 general-purpose I/O pins and a wide 2.2 V to 3.6 V operating range suited to USB and graphics subsystems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripherals such as ADC, timers, communication controllers, and I/O. The PIC24F is Microchip's 16-bit modified-Harvard MCU family, positioned between 8-bit PIC16/PIC18 and 32-bit PIC32MX parts; it scales up by adding larger memories, USB, and richer peripherals while retaining PIC assembly compatibility. The 'DA' sub-family adds an LCD/graphics display controller capable of driving displays up to 4.3" WQVGA at 480 x 272 resolution, and the 'F' core carries eXtreme Low Power (XLP) technology for battery-friendly designs. Key features of the PIC24FJ128DA206 include an integrated full-speed USB 2.0 OTG controller with on-chip transceiver, a 3-bit graphical display controller with hardware acceleration, up to 96 KB SRAM for frame buffering, an 8-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, and CTMU for capacitive touch sensing. The 64-pin TQFP package exposes all major peripherals while keeping the footprint compact for embedded HMI boards. Architecturally, the PIC24F core uses a 16-bit modified-Harvard bus with separate program and data paths, a 24-bit instruction word, and 16 working registers. The internal 8 MHz Fast RC oscillator (with PLL up to 32 MHz) eliminates external crystals in many designs. The graphics pipeline offloads pixel rendering from the CPU, and the USB OTG stack supports both host and device roles for product-flexibility. Typical applications include low-cost color graphical HMI panels (appliance control, thermostats, medical instrument UIs), USB peripherals and embedded hosts (mass storage, HID, CDC), battery-powered portable instrumentation with touch sensing, industrial control panels requiring graphical diagnostics, and consumer products needing a USB charging or data interface. The graphics + USB combination is the strongest value proposition versus generic PIC24F parts. When designing with this part, plan the PCB for a 4-layer stack-up so the TQFP-64 decoupling loop is short and the USB DP/DM traces are 90-character, length-matched, and impedance-controlled near 90 ohms differential. The internal oscillator is usually sufficient, but add a footprint for an optional crystal if the application needs tight USB clock accuracy. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes that are not aggregated on the manufacturer datasheet, giving engineers a one-stop reference for the PIC24FJ128DA206-I/PT.

Cotización Contacto

PIC24FJ128DA206T-I/PT

PIC24FJ128DA206T-I/PT - 128KB Flash 16-Bit MCU w/ USB OTG | Microchip

The Microchip Technology PIC24FJ128DA206T-I/PT is a 16-bit PIC24F microcontroller featuring 128KB (43K x 24) of Flash program memory, 96KB of RAM, and an integrated USB On-The-Go (OTG) controller plus a graphics LCD controller. It operates at up to 32 MHz MIPS performance from a 2.5V/3.3V supply and is housed in a 64-pin TQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. Within the embedded hierarchy, the PIC24FJ belongs to the 16-bit MCU class, which sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). The "PIC24F" prefix designates the family, while "J" indicates the high-performance, low-power Flash variant using Microchip's nanoWatt technology. The "DA" series specifically integrates display and USB-OTG peripherals, targeting human-machine interface (HMI) and USB-embedded designs. Key features include an integrated Full-Speed USB 2.0 OTG controller with on-chip transceiver, a graphics controller supporting TFT/STN/CSTN panels up to 640x480 (VGA), a 16-channel 10-bit ADC with 500 ksps conversion rate, up to 52 dedicated digital I/O pins, and hardware crypto engines for secure data transfer. The device also supports PMP (Parallel Master Port), I2S, SPI, I2C, UART, and CAN peripherals, providing extensive connectivity. Architecturally, the PIC24FJ uses a modified Harvard architecture with separate buses for instruction and data, a 16-bit wide datapath, and a 24-bit instruction word. This delivers deterministic execution with single-cycle 16x16 MAC operations. The nanoWatt XLP technology reduces sleep current to the nanoampere range, making the device suitable for battery-powered applications. Typical applications include USB barcode scanners, USB medical instrumentation, USB sensor hubs, USB-to-UART bridges, low-cost HMI panels with TFT displays, industrial control panels, and embedded graphics terminals. The integrated USB OTG reduces BOM cost and PCB area compared to designs using an external USB controller. When designing with this device, ensure proper decoupling (100 nF ceramic plus 10 uF bulk) close to each VDD/VSS pair, follow Microchip's USB hardware design guidelines for the 90-ohm differential D+/D- trace impedance, and use the free MPLAB X IDE with the XC16 compiler for firmware development. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical USB/graphics design notes not consolidated in the manufacturer datasheet.

Cotización Contacto

PIC24FJ128DA210-I/PT

PIC24FJ128DA210-I/PT - 16-Bit MCU, 128KB Flash, Graphics, USB OTG | Microchip

The Microchip Technology PIC24FJ128DA210-I/PT is a 16-bit PIC24F microcontroller with integrated graphics acceleration, a display controller capable of driving displays up to 4.3" WQVGA (480x272), 128KB of Flash program memory, and USB On-The-Go (OTG) support. It runs at up to 32MHz (16 MIPS) on a modified Harvard RISC architecture and is housed in a 100-pin TQFP (12x12 mm) package. The part operates from 2.0V to 3.6V, suitable for battery-powered and 3.3V-rail embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals (timers, ADC, communication controllers, I/O). The PIC24F family is Microchip's 16-bit extension of the 8-bit PIC architecture, sharing the same development environment (MPLAB X IDE, XC16 compiler) but adding DSP instructions, larger address space, and higher throughput. Within Microchip's portfolio, the PIC24FJ128DA210 belongs to the graphics-enabled "DA" sub-family, sitting between general-purpose PIC24FJ128GA and high-performance PIC24EP series. Key features include 128KB (43K x 24 instruction words) Flash, 24KB RAM, an on-chip 96KB frame buffer for graphics, 3.3V operation, and a peripheral set that includes USB OTG, parallel master port, I2C, SPI, UART, 16-bit timers, and a 10-bit ADC. The integrated graphics controller supports TFT panels with up to 4.3" WQVGA resolution, eliminating the need for an external display controller in many HMI designs. The PIC24FJ128DA210-I/PT integrates the core and graphics acceleration into a single die, reducing BOM cost and PCB area in graphical product designs. Compared to using a discrete MCU plus external LCD controller, the integrated approach reduces component count and simplifies firmware development by providing hardware-accelerated drawing primitives. Typical applications include low-cost graphical HMI panels, home appliance user interfaces, medical device displays, industrial control screens, point-of-sale terminals, and USB-connected embedded devices. The part is well suited to any application needing rich on-screen graphics without the cost of a higher-end ARM-based MCU. When designing with this part, allocate PCB area for the 100-pin TQFP package (12x12 mm) and provide proper decoupling near the analog and digital supply pins. The USB OTG interface requires 0.1uF decoupling on VUSB3V3 and a 27-ohm series resistor on D+/D- lines per USB specification. This page synthesizes distributor pricing, drop-in PIC24F alternatives, and practical design considerations that are not collected in a single location in the manufacturer datasheet.

Cotización Contacto

PIC24FJ128DA210T-I/PT

PIC24FJ128DA210T-I/PT - 16-bit 32MHz 128KB Flash USB Graphics MCU

The Microchip Technology PIC24FJ128DA210T-I/PT is a 16-bit PIC microcontroller from the PIC24F-DA family, integrating a 32MHz PIC core, 128KB (43K x 24) of Flash program memory, 96KB of RAM, and a hardware graphics controller with USB On-The-Go (OTG) in a 100-pin TQFP (12x12mm) package. A PIC microcontroller (MCU) is a compact programmable processor that integrates CPU, memory, and I/O peripherals on a single silicon die. Within the broader semiconductor taxonomy, the PIC24FJ128DA210 belongs to the PIC24F family (16-bit modified Harvard architecture) which sits above 8-bit PIC MCUs and below 32-bit MIPS-based PIC32 MCUs in Microchip's portfolio. The 'FJ' series is built on a low-power Flash process, and the 'DA' sub-family adds an integrated display controller and graphics acceleration IP. This device targets human-machine interface (HMI) applications, replacing discrete graphics controllers and LCD driver chips with a single integrated solution. Key features include 32MHz operation (8 MIPS), 128KB Flash (43K x 24), 96KB RAM, an integrated graphics controller that directly drives displays up to 4.3-inch WQVGA at 480x272 resolution, and a USB OTG controller for direct device-to-device connectivity. The 100-pin TQFP package exposes up to 85 I/O pins with multiple communication peripherals (UART, SPI, I2C) and a 16-channel 10-bit ADC. The 'I' suffix indicates industrial temperature grade (-40C to +85C), and 'T' indicates Tape & Reel packaging. From an architectural standpoint, the PIC24FJ uses a 16-bit modified Harvard architecture with separate program and data paths, supporting DSP-like instructions and hardware multiply/divide. The integrated graphics controller is a hardware-accelerated 2D engine that offloads pixel rendering from the CPU, enabling smooth GUI animations at full panel refresh rates. Combined with the USB OTG controller, the device can simultaneously drive a display while managing USB device, host, or on-the-go communication. Typical applications include graphical user interfaces for industrial control panels, medical instrumentation displays, consumer appliance HMI panels, and embedded systems that need both a TFT display interface and USB connectivity. The wide I/O count makes the 100-pin TQFP suitable for systems with multiple peripheral interfaces. When designing with this device, pay attention to the voltage domain (2.2V to 3.6V core) and provide adequate decoupling across VDD/VSS pairs. The integrated graphics controller significantly reduces firmware complexity but requires correct PLL and timing configuration per the datasheet. For pin-compatible scaling, Microchip offers smaller-memory and different-package variants in the same DA family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC24FJ128GA006-I/MR

PIC24FJ128GA006-I/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24FJ128GA006-I/MR is a 16-bit PIC24F microcontroller delivering 16 MIPS at 16 MHz, with 128 KB of Flash program memory, 8 KB of RAM, and a peripheral set that includes a 16-bit Parallel Master Port, 5x 16-bit timers, an RTCC, and a 10-bit 1.1 Msps A/D converter in a 64-pin 9x9 mm VQFN package. It belongs to the PIC24FJ128GA006 family of 64/80/100-pin general-purpose Flash microcontrollers. What is a 16-bit Flash microcontroller? A 16-bit Flash microcontroller is an embedded computing device that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich peripheral set onto a single chip, with the program width sized at 16 bits to provide a balance between 8-bit simplicity and 32-bit computational headroom. In the hierarchy of embedded MCUs, this part sits at: PIC24F MCU -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include 128 KB Flash (43K x 24 words), 8 KB RAM, 53 digital I/O pins, an mTouch capacitive touch peripheral, a Parallel Master Port (PMP) for external bus expansion, USB 2.0 full-speed On-The-Go (OTG) with integrated transceiver, a 16-bit CRC, a Real-Time Clock and Calendar (RTCC), and the Microchip Core Independent Peripherals (CIPs) ecosystem for low-power operation. The internal oscillator is factory-calibrated to within +/- 2% accuracy. Technical depth: the PIC24F core uses a modified Harvard architecture with a 16-bit data path and a 24-bit instruction word, allowing single-cycle multiplication. The Flash is rated for at least 1000 erase/write cycles typical. The on-chip 1.8V core regulator is powered from a 2.0-3.6V supply, providing a robust noise environment for analog peripherals, including the 10-bit ADC capable of 500 ksps (1.1 Msps for two channels). Typical applications include industrial control panels, low-power human-machine interfaces with LCD or segmented display, USB peripherals and OTG device firmware upgrades, secure access control with capacitive touch keypads, portable medical measurement, and general-purpose embedded designs using PMP to drive external parallel N-TPU/FIFO memories. When designing with this part, ensure that the VQFN-9x9 exposed pad is soldered to a sufficient copper pour for thermal dissipation and that VDDCORE is bypassed with a 10 uF ceramic capacitor. The device is also offered in 64-pin TQFP and 80/100-pin packages (e.g., PIC24FJ128GA006-I/PT, PIC24FJ128GA010-I/PF) with the same peripheral map for design reuse. This page synthesizes distributor pricing, drop-in 64-VQFN alternatives, and practical design notes that extend beyond the manufacturer datasheet DS39747C for engineers evaluating PIC24F MCU selection.

Cotización Contacto

Subcategorías

Productos (32865)

PIC24FJ1024GA606T-I/PT - 1MB Flash 16-bit MCU 32MHz TQFP-64 | Microchip

PIC24FJ1024GA610-E/BG - 16-Bit MCU, 1MB Flash, 32MHz, 121-TFBGA | Microchip

PIC24FJ1024GA610-E/PT - 16-Bit MCU 1MB Flash 100-TQFP | Microchip

PIC24FJ1024GA610-I/BG - 16-bit 1MB Flash MCU, 100-TFBGA | Microchip

PIC24FJ1024GA610T-I/PT - 16-bit 32MHz MCU, 1MB Flash, 100-TQFP | Microchip

PIC24FJ1024GB606-E/PT - 1MB Flash 16-Bit MCU USB | Microchip

PIC24FJ1024GB606T-I/MR - 16-bit MCU, 1MB Flash, USB | Microchip

PIC24FJ1024GB610-E/PT - 16-bit 32MHz 1MB Flash MCU | Microchip

PIC24FJ1024GB610-I/BG - 16-bit 1MB Flash USB MCU | Microchip

PIC24FJ1024GB610-I/PT - 1MB Flash, USB OTG 16-bit MCU | Microchip

PIC24FJ1024GB610T-I/BG - 16-bit MCU, 1MB Flash, USB-OTG | Microchip

PIC24FJ128DA106-I/MR - 16-bit MCU w/ Graphics & USB | Microchip

PIC24FJ128DA106-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip

PIC24FJ128DA106T-I/MR - 16-bit 32MHz 128KB Flash MCU | Microchip

PIC24FJ128DA110-I/BG - 16-Bit 32MHz MCU 128KB Flash USB Graphics | Microchip

PIC24FJ128DA110-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

PIC24FJ128DA110T-I/BG - 16-bit 32MHz MCU, 128KB Flash, 121-TFBGA | Microchip

PIC24FJ128DA110T-I/PT - 16-Bit MCU, 128KB Flash, USB, Graphics | Microchip

PIC24FJ128DA206-I/MR - 16-Bit 32MHz MCU w/ 128KB Flash & USB-OTG | Microchip

PIC24FJ128DA206-I/PT - 16-bit MCU, 128KB Flash, USB OTG, Graphics | Microchip

PIC24FJ128DA206T-I/PT - 128KB Flash 16-Bit MCU w/ USB OTG | Microchip

PIC24FJ128DA210-I/PT - 16-Bit MCU, 128KB Flash, Graphics, USB OTG | Microchip

PIC24FJ128DA210T-I/PT - 16-bit 32MHz 128KB Flash USB Graphics MCU

PIC24FJ128GA006-I/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip