Circuitos integrados

PIC32MK0512MCM064T-E/MR

PIC32MK0512MCM064T-E/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip

The Microchip PIC32MK0512MCM064T-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB SRAM into a 64-pin 9x9 mm QFN package. It is part of the PIC32MK Motor Control (MCM) family and combines a Floating Point Unit (single/double precision), MicroMIPS compressed-code mode, four 64-bit accumulators, and a single-cycle MAC engine for high-performance motor control and DSP workloads. A 32-bit microcontroller is a programmable processor with a 32-bit data path, on-chip Flash program memory, RAM, and integrated peripherals such as ADC, PWM, CAN, USB, and timers. Within the semiconductor taxonomy, MCUs sit below microprocessors (MPUs) and above simple 8/16-bit controllers; the PIC32MK family targets deterministic real-time control with DSP-class math, positioned above PIC24/PIC16 and below higher-end Cortex-M7/i.MX RT-class parts in capability. Key features include USB 2.0 Full-Speed with on-chip transceiver, dual CAN-FD controllers, a 12-bit 3.75 Msps ADC with up to 24 channels, multiple PWM channels with 250 ps resolution, four op amps for current sensing, four 16-bit analog comparators, and a 64-pin QFN footprint that exposes a rich peripheral set. ECC on Flash and SRAM improves reliability in industrial and automotive-adjacent environments. The device uses a Harvard architecture with separate program and data paths and an FPU for floating-point motor-control algorithms. The PIC32MK MCM silicon integrates dedicated motor-control peripherals such as high-resolution PWM and synchronized ADCs, allowing field-oriented control (FOC) loops to close in microseconds. Operates from 2.3 V to 3.6 V. Typical applications include BLDC/PMSM motor drives (drones, e-bikes, industrial servos), solar inverters, industrial PLCs, IIoT sensor nodes, and USB/CAN-FD connected industrial control boards. Pair with Microchip's MPLAB X IDE and MCC code configurator for fast bring-up. Trade-off: at 120 MHz the 64-pin QFN dissipates moderate power; designers must keep total IO current under the 150 mA rail budget when sinking many GPIOs simultaneously. This page synthesizes distributor stock, drop-in PIC32MK family alternatives, datasheet-block pinout, and engineering design notes not found on the manufacturer summary page.

Cotización Contacto

PIC32MK0512MCM064T-E/PT

PIC32MK0512MCM064T-E/PT - 120MHz 512KB MCU, USB FS, CAN-FD | Microchip

The Microchip Technology PIC32MK0512MCM064T-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB of ECC-protected Flash memory, housed in a 64-pin TQFP (10x10 mm) package. It combines a single-precision/double-precision hardware Floating Point Unit (FPU), MicroMIPS compressed code mode for up to 40% code-size reduction, four 64-bit accumulators, and single-cycle MAC with saturating and fractional math support, making it a true DSP-grade MCU for closed-loop control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one IC. Within the embedded-semiconductor hierarchy, the PIC32MK family sits between general-purpose Cortex-M MCUs and DSP microcontrollers, targeting deterministic motor control, digital power conversion, and Industrial IoT applications where floating-point precision, ECC memory, and CAN-FD connectivity are mandatory. This part is the Flash-based, ECC-enabled "MCM" variant (Motor Control / Connectivity / Memory). Key features of the PIC32MK0512MCM064T-E/PT include: a 120 MHz core with hardware FPU, 512 KB dual-panel ECC Flash plus 64 KB ECC RAM, USB Full-Speed device/host, two CAN-FD controllers, multiple 12-bit ADC modules (multi-MSPS capable for current sampling), high-resolution PWM outputs targeting motor-control and digital-power topologies, and a wide operating voltage range suitable for 3.3 V industrial rails. The 64-pin TQFP (PT) package gives enough I/O for multi-axis FOC motor drives while remaining hand-solderable on 4-layer FR-4. Architecturally, the PIC32MK uses a 5-stage MIPS32 microAptiv core with a tightly-coupled DSP engine and an enhanced Interrupt Controller. The dual-panel Flash architecture supports live firmware updates without CPU stall, while ECC on both Flash and SRAM protects against bit-flips in harsh industrial environments. The peripherals (PWM, ADC, op-amps, comparators) are interconnected through a high-bandwidth peripheral bus, minimizing latency between current sensing and PWM update - critical for sub-microsecond FOC loops. Typical applications include 3-phase BLDC/PMSM and ACIM motor control (field-oriented control), industrial servo drives, solar inverters and digital power supplies, Industrial IoT gateways, and automotive body/comfort ECUs. The combination of FPU + DSP + ECC + CAN-FD + USB FS makes it particularly suited to functional-safety-oriented industrial designs. When designing with this device, pay special attention to decoupling (the high-speed ADC and PWM generate fast transients), PCB thermal layout (the TQFP-64 has a sizeable thermal pad on the lead frame), and the dual-panel Flash programming flow for field-upgradable firmware. MPLAB Harmony 3 and MCC provide peripheral libraries and motor-control examples that shorten development time. This page synthesizes distributor pricing, drop-in same-family alternatives, and engineering design notes beyond the manufacturer datasheet to accelerate component selection and procurement.

Cotización Contacto

PIC32MK0512MCM064T-I/MR

PIC32MK0512MCM064T-I/MR - 120MHz MCU 512KB Flash 64-QFN | Microchip

The Microchip PIC32MK0512MCM064T-I/MR is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 120 MHz, with 512 KB of ECC-protected Flash and a Floating Point Unit (FPU) for single/double precision operations, housed in a 64-pin QFN (MR) 9x9 mm package. It integrates 49 I/O pins, USB Full-Speed, CAN-FD, multiple 12-bit ADCs, and DSP extensions (four 64-bit accumulators and single-cycle MAC), making it tailored for motor control, digital power, and Industrial IoT. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile memory (RAM), non-volatile memory (Flash/ROM), and peripherals on a single silicon die. MCUs sit at the lowest tier of the embedded computing hierarchy: MCU -> microcontroller -> embedded processor -> system-on-chip (SoC). Within the MCU taxonomy, the PIC32MK family belongs to the 32-bit class, sharing lineage with ARM Cortex-M devices but using the MIPS32 instruction set with DSP extensions for deterministic real-time control. The FPU enables efficient floating-point math, while ECC-protected Flash ensures reliability in safety-critical applications. Key features include a 120 MHz MIPS32 microAptiv core with FPU and DSP extensions (MicroMIPS for 40% smaller code, four 64-bit accumulators, single-cycle saturating MAC), 512 KB ECC Flash, and 64 KB RAM. The 64-pin QFN package provides compact footprint for space-constrained designs, while peripherals include USB Full-Speed, CAN-FD, multiple 12-bit ADCs, configurable logic cells, and motor-control PWMs. The device supports -40C to +85C industrial temperature range. The architecture combines high-performance scalar processing with deterministic DSP, allowing simultaneous motor control loops and communication stack execution. The 12-bit ADC and dedicated PWM peripherals enable precise field-oriented control (FOC) of three-phase motors, while CAN-FD and USB-FS enable industrial networking and diagnostics. ECC Flash and a Class-B Safety Library support functional safety compliance. Typical applications include BLDC/PMSM motor drives (FOC algorithms benefit from DSP extensions), industrial automation controllers (CAN-FD networking), digital power conversion (high-resolution PWM and ADC), and Industrial IoT edge nodes (USB-FS for commissioning, CAN-FD for backhaul). Design tip: route the exposed thermal pad to a continuous ground plane to dissipate switching losses and reduce junction temperature during high-duty motor drive operation. This page synthesizes distributor pricing, same-family drop-in alternatives, and application-specific design guidance not aggregated on the manufacturer datasheet alone.

Cotización Contacto

PIC32MK0512MCM064T-I/PT

PIC32MK0512MCM064T-I/PT - 120MHz MCU 512KB Flash Motor Control TQFP-64

The Microchip PIC32MK0512MCM064T-I/PT is a 32-bit microcontroller built around the MIPS32 microAptiv core running at 120 MHz, integrating a single/double-precision Floating Point Unit (FPU), four 64-bit accumulators, and single-cycle saturating/fractional MAC, in a 64-pin TQFP (10x10 mm) package. It provides 512 KB of ECC-protected dual-panel Flash, 64 KB of RAM, and a peripheral set explicitly engineered for motor control, digital power, and Industrial IoT (IIoT) edge nodes. A 32-bit MCU is a microcontroller whose datapath, registers, and arithmetic logic unit are 32 bits wide, allowing a single cycle to operate on larger data words than 8-bit or 16-bit MCUs. The PIC32MK family extends this with a hardware FPU and DSP extensions (MAC, accumulators), placing it in the hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK family -> motor-control sub-family. This architectural depth lets designers replace DSP+MCU dual-chip designs with a single device running vector and field-oriented control loops at full rate. Key differentiating features are the four 12-bit ADCs with up to 42 analog input channels, dedicated high-resolution PWM outputs for motor control (typically 7 pairs at >2 ns resolution), four CAN-FD controllers, USB Full-Speed, and an integrated Crypto engine. The device is rated for the industrial -40C to +85C operating range and ships as RoHS-compliant with 100% Pb-free (T) tape-and-reel packaging per the part suffix. The microAptiv pipeline combined with dual-panel Flash enables live Flash update without CPU stall, an essential capability for IIoT gateways that must upgrade firmware in the field without downtime. The dual-panel Flash architecture and ECC error correction further reduce the chance of bit-flip-induced field failures in motor-drive systems exposed to electrical noise. Typical applications include sensorless field-oriented control (FOC) of PMSM and BLDC motors, industrial servo drives, multi-channel power-conversion digital controllers, USB-connected IIoT edge nodes, and automotive body/comfort subsystems requiring CAN-FD. The combination of four independent CAN-FD ports and a USB FS device/host stack is particularly attractive in gateway designs that bridge industrial fieldbus and USB diagnostics. When designing with this part, plan the PCB thermal budget around 0.65 W typical dissipation; place a continuous ground plane under the TQFP-64 and reserve at least four 12 mil thermal vias under the exposed die pad. Do not route the high-resolution PWM outputs near analog ADC traces - capacitive coupling can degrade the 12-bit ADC SNR below datasheet guarantees. This page synthesizes verified distributor pricing across DigiKey, Mouser, Octopart and others, drop-in same-package alternatives from the PIC32MK family, and practical motor-control design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC32MK0512MCM100-E/PT

PIC32MK0512MCM100-E/PT - 120MHz MCU 512KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MK0512MCM100-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, operating at up to 120MHz with 512KB of Flash and 128KB of SRAM, housed in a 100-pin TQFP (12x12mm) package. The device integrates a Floating Point Unit for single and double precision math, four 64-bit accumulators, single-cycle MAC operations, and MicroMIPS mode for 40% smaller code size, making it well suited for DSP-intensive motor control and industrial applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory, and programmable peripherals on a single die. The PIC32MK family extends the PIC32 architecture into motor-control and industrial-control segments by pairing the microAptiv core with a rich peripheral set including CAN-FD, USB, 12-bit ADCs with up to 6 MSPS, and high-resolution PWM. Within the broader taxonomy, MCUs belong to microprocessors -> semiconductors -> integrated circuits. Key features include 78 I/O pins, 2x USB, 2x CAN-FD, a 4-channel 12-bit ADC at up to 6 MSPS with 12-bit DAC, 16-bit timers, op amps, comparators, and ECC-protected Flash for safety-critical code. The extended (-E) temperature range of -40C to +125C supports industrial and automotive under-hood environments. ECC on Flash and RAM increases reliability for long-lifetime industrial deployments. The microAptiv core implements an M-class pipeline with hardware multiply/divide and DSP extensions. MicroMIPS compressed instructions reduce memory footprint while maintaining 32-bit performance. The integrated FPU removes the need for software floating-point emulation in control loops that compute trigonometric or vector transforms in real time. Dual-panel Flash supports live firmware updates without device downtime. Typical applications include BLDC and PMSM motor drives (field-oriented control), industrial PLCs, solar inverters, and IIoT edge nodes. The CAN-FD interface enables modern automotive and factory-floor networks, while the dual-USB supports device/host stacks for diagnostics and firmware loading. On-chip op amps simplify current-sense conditioning in motor-control hardware. When designing with the 100-TQFP, allocate a 4-layer PCB with continuous ground beneath the package, decouple each VDD pin with 100nF X7R plus bulk capacitance near the MCU, and keep the analog AVDD rails RC-filtered to reduce ADC noise coupling. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the Microchip PIC32MK GPK/MCM family datasheet to support faster engineering decisions.

Cotización Contacto

PIC32MK0512MCM100-I/PT

PIC32MK0512MCM100-I/PT - 120MHz MCU, 512KB Flash, Motor Control | Microchip

The Microchip Technology PIC32MK0512MCM100-I/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core running at 120 MHz, integrating 512 KB of ECC-protected Flash, 128 KB of RAM, and 4 KB of EEPROM in a 100-pin TQFP (PT) package. It targets motor control and industrial applications, offering a rich peripheral set including USB Full Speed, CAN-FD, 12-bit ADC, motor-control PWMs, and a hardware Floating Point Unit (FPU) for single- and double-precision math. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. Within the broader embedded taxonomy, the PIC32MK0512MCM100 sits in the 32-bit high-performance MCU category, which itself belongs to the Microcontrollers > Integrated Circuits family — devices that execute firmware directly from on-chip Flash while interacting with sensors, actuators, and human-machine interfaces in real time. Key features include the single-cycle hardware MAC with four 64-bit accumulators supporting saturating and fractional math, a 120 MHz core that delivers 198 DMIPS performance, dual-panel Flash for concurrent read/erase, and MicroMIPS mode that reduces code size by up to 40%. The integrated FPU accelerates DSP routines critical for field-oriented control (FOC) algorithms. On-board peripherals include multiple 12-bit ADCs with up to 6 Msps sampling, high-resolution PWM outputs, quadrature encoder interfaces, and USB 2.0 Full Speed with on-chip transceiver. The architecture supports deterministic motor-control loops by combining high-resolution PWMs (250 ps resolution), fast ADC triggering, and DMA-driven data movement that keeps the CPU available for control-law computation. ECC on Flash and RAM enhances reliability in industrial environments subject to single-event upsets and voltage transients. Typical applications include AC induction, BLDC, and PMSM motor drives, industrial automation controllers, PLC modules, IIoT edge nodes, and multi-channel data acquisition systems. Design considerations: use the integrated FPU and DMA to offload the CPU during FOC loops, place decoupling capacitors close to each VDD/VSS pair, and follow Microchip AN2580 PCB layout guidelines for mixed-signal motor-control designs.

Cotización Contacto

PIC32MK0512MCM100T-E/PT

PIC32MK0512MCM100T-E/PT - 120MHz 512KB Flash MCU TQFP-100

The Microchip Technology PIC32MK0512MCM100T-E/PT is a 32-bit MIPS32 microAptiv microcontroller running at 120 MHz with 512 KB of ECC-protected Flash and 128 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It features a floating-point unit (FPU) supporting single and double precision math, four 64-bit accumulators, single-cycle MAC, and a high-performance peripheral set targeting motor control, industrial control and Industrial Internet of Things (IIoT) applications. Microcontrollers (MCUs) are compact, self-contained computing systems integrated on a single silicon die, combining a processor core, program and data memory, and a rich set of on-chip peripherals. The PIC32MK family sits in the broader hierarchy: microcontroller -> embedded MCU -> 32-bit RISC MCU -> MIPS microAptiv MCU -> Microchip PIC32 family. These devices typically govern real-time control loops, sensor acquisition, and communication bridging in industrial and IoT edge nodes. Key features include a USB Full-Speed interface, CAN-FD controllers, multiple 12-bit ADC modules with high-speed capability, motor-control PWM peripherals, and 4 KB of EEPROM emulation. The integrated FPU and DSP extensions deliver deterministic math throughput for field-oriented control (FOC) and digital filtering workloads, while ECC on Flash and RAM improves functional safety in harsh environments. The 120 MHz microAptiv core implements MicroMIPS mode for up to 40% smaller code size compared to standard MIPS32 instructions, allowing the 512 KB Flash to accommodate larger application codebases. The architecture supports saturating and fractional arithmetic natively, which simplifies closed-loop control firmware. Typical applications include three-phase motor drives, industrial PLCs, building automation, IIoT sensor hubs, and multi-channel data-acquisition systems. The combination of CAN-FD, USB and motor-control PWM makes the part a single-chip solution for industrial mechatronics. When designing with this device, ensure the supply rail stays within the 2.3 V to 3.6 V range and that decoupling is placed close to all VDD/VSS pairs. The TQFP-100 footprint gives access to the full peripheral count, but board layout must keep analog and digital grounds separated to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MK family, and practical design notes that go beyond the manufacturer datasheet summary.

Cotización Contacto

PIC32MK0512MCM100T-I/PT

PIC32MK0512MCM100T-I/PT - 120MHz, 512KB ECC Flash MCU | Microchip

The Microchip Technology PIC32MK0512MCM100T-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core, integrating a hardware Floating Point Unit (FPU) and operating at up to 120 MHz in a 100-pin TQFP (12x12 mm) package. It combines 512 KB of ECC-protected Flash, 128 KB of RAM, four 64-bit accumulators, single-cycle MAC, and MicroMIPS mode for ~40% code compression, targeting motor control and industrial IoT applications. A 32-bit microcontroller is a microprocessor that uses 32-bit-wide data paths, registers, and addresses, enabling higher computational throughput than 8-bit or 16-bit MCUs. Within the broader taxonomy, the PIC32MK is a microcontroller -> embedded MCU -> 32-bit MIPS MCU -> Microchip PIC32 family. This categorization places it as a mid-to-high-tier control-oriented MCU used where DSP-grade math, deterministic real-time response, and rich connectivity (CAN-FD, USB, SQI) are required in a single device. Key features include four CAN-FD controllers, two USB 2.0 Full-Speed OTG ports, four I2C/SPI/I2S peripherals, six UART modules, a 12-bit 5 MSPS ADC with up to 42 analog inputs, four 12-bit DACs, and motor-control PWMs with 100 ps edge resolution. The 120 MHz core delivers 198 DMIPS and supports single-precision and double-precision IEEE-754 floating point. Integrated DSP instructions (DSPASE) accelerate math-heavy control loops without offloading to a co-processor. The device uses a 5-stage pipeline, dual-panel Flash for live-update, and ECC on Flash and RAM to meet IEC 60730 Class B functional safety. Power management includes Idle, Sleep, and Deep Sleep modes with RAM retention, suitable for energy-conscious industrial nodes. Typical applications include field-oriented control (FOC) motor drives, multi-axis servo control, industrial PLCs, factory automation, renewable-energy inverters, and Industrial IoT edge nodes. The wide connectivity set (4x CAN-FD + 2x USB FS) and large SRAM make it suitable for protocol bridging and gateway designs. When designing, allocate sufficient decoupling (100 nF + 4.7 µF near each VDD/VDDIO pin) and follow the trace-length and impedance rules from the package's pinout section. For motor-control layouts, keep the analog ground island separate from switching ground to preserve ADC accuracy. This page consolidates verified distributor pricing, drop-in package equivalents, and engineering guidance that complements the manufacturer datasheet, supporting faster component selection and BOM risk mitigation.

Cotización Contacto

PIC32MK1024GPD064-E/PT

PIC32MK1024GPD064-E/PT - 120MHz FPU MCU 1MB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK1024GPD064-E/PT is a high-performance 32-bit MIPS32 microAptiv microcontroller with integrated FPU and DSP extensions, delivering up to 120 MHz core clock performance and packaged in a 64-pin TQFP (10x10 mm) industrial/automotive-grade form factor. The device integrates 1 MB of Flash program memory, 256 KB of SRAM, and 4 KB of EEPROM, targeting motor-control and general-purpose embedded applications where DSP throughput, deterministic response, and rich analog integration are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die. The PIC32MK family extends this concept into 32-bit territory with a MIPS32 RISC architecture, FPU, and DSP extensions, placing it in the hierarchy: microcontroller -> 32-bit MCU -> MIPS architecture -> automotive/industrial grade MCU -> motor-control optimized MCU. Compared with 8-bit MCUs, the PIC32MK provides deterministic interrupt latency, hardware DSP for fixed-point math, and analog peripherals co-designed for closed-loop motor control. Key features include 120 MHz maximum core frequency, hardware FPU (single/double precision) and DSP, four 16-bit ADC modules with up to 42 channels and 3.2 MSPS combined throughput, multiple high-speed PWM channels with dead-time insertion for three-phase motor drive, CAN-FD controllers, USB-FS, and 48 general-purpose I/O pins. The PIC32MK1024GPD064-E/PT is the Extended-temperature (-40C to +125C) and Automotive (AEC-Q100) qualification variant, evidenced by the "E" in the ordering code and Microchip listing it as "Automotive, AEC-Q100". The architecture pairs an MIPS32 microAptiv core with a tightly-coupled 32-channel DMA engine and dual analog front-ends, enabling simultaneous motor control and host telemetry without CPU intervention. ECC-protected Flash supports industrial reliability requirements, and the 3.3 V operating range (2.2 V to 3.6 V wide supply tolerance) is suited to 24V-bus-derived industrial rails. Typical applications include three-phase motor control (BLDC/PMSM), industrial automation PLCs, IoT edge nodes, digital power conversion, and automotive body/ECU subsystems. Per the manufacturer datasheet, this combination of FPU+DSP, CAN-FD, and motor-control PWM is positioned for general purpose and motor control application designs. When designing with this MCU, validate that your compiler toolchain (MPLAB XC32) supports the FPU and DSP extensions, and budget interrupt stack space for the nested vector interrupt controller. Decouple AVDD/VDD separately and use low-impedance ground returns for the PWM outputs to reduce switching noise coupling into the ADC inputs. This page synthesizes distributor pricing, AEC-Q100 alternative comparison, and practical design notes for motor-control and industrial deployments that go beyond the manufacturer datasheet summary.

Cotización Contacto

PIC32MK1024GPD064-I/PT

PIC32MK1024GPD064-I/PT - 32-Bit MCU, 120MHz, 1MB Flash, 64-TQFP | Microchip

The Microchip PIC32MK1024GPD064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 120 MHz with an integrated Floating Point Unit (FPU) supporting single and double precision math. The device provides 1 MB of dual-panel Flash memory with Live Update support, 4 KB of EEPROM, and 256 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. It combines this computing performance with a rich set of peripherals targeting motor control, industrial control, and Industrial Internet of Things (IIoT) applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program and data memory, and a configurable peripheral set on a single silicon die. Microcontrollers belong to the broader category of embedded processors and microcontrollers, which sit below microprocessors in system hierarchy in that they are designed for deterministic, real-time control tasks rather than general-purpose computing. The PIC32MK family specifically adds a DSP engine, four 64-bit accumulators, and single-cycle MAC support with saturating and fractional math, which accelerates signal-processing and motor-control loops. Key differentiating features include seven 12-bit 3.75 MSPS ADC cores supporting up to 26 analog inputs, four operational amplifiers, and five analog comparators integrated on-chip. The device also offers four 16-bit timers, an 8-channel DMA controller, multiple CAN-FD and USB interfaces, and a QEI peripheral that simplifies field-oriented motor control. MicroMIPS mode reduces code size by approximately 40%, allowing more application code to fit in the 1 MB Flash budget. The dual-panel Flash and Live Update capability let developers run firmware upgrades without halting the application, which is valuable for industrial systems that must remain online. Typical applications include three-phase motor drives (BLDC, PMSM, AC induction), industrial servo control, PLC I/O modules, solar inverters, and IIoT edge nodes that combine analog sensing with deterministic control. The wide operating temperature range and rich analog integration make it well suited to factory automation and ruggedized industrial equipment. When designing with the PIC32MK1024GPD064-I/PT, allocate PCB area for the 64-TQFP footprint and follow Microchip application note guidelines for analog layout, including short traces between op-amp inputs and the dedicated ADC channels. Note that Microchip's recommended alternative for new designs is the PIC32MK1024GPK064, which provides additional peripherals in the same family. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers and buyers a single decision-ready reference for the PIC32MK1024GPD064-I/PT.

Cotización Contacto

PIC32MK1024GPD064T-I/MR

PIC32MK1024GPD064T-I/MR - 120MHz MCU, 1MB Flash, 64-QFN | Microchip

The Microchip Technology PIC32MK1024GPD064T-I/MR is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz, integrating 1 MB of Flash and 256 KB of SRAM in a 64-pin 9x9 mm QFN package. It is part of the PIC32MK General Purpose Dual (GPD) family targeting motor control, digital power, and industrial conversion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The PIC32MK family belongs to the broader PIC32 family, which uses the MIPS32 microAptiv core architecture; the GPD sub-family is a dual-partition variant with separate Flash and SRAM regions optimized for deterministic real-time control. Within Microchip's portfolio, PIC32MK MCUs sit between the lower-pin-count PIC32MX and the higher-performance dsPIC33CH dual-core DSP controllers. Key features include 120 MHz core speed with DSP instructions and FPU, 1 MB dual-bank Flash, 256 KB SRAM, four independent analog comparators with 32 ns response, multiple 12-bit ADCs up to 3.5 MSPS, three 4-channel high-speed PWM modules (250 ps resolution), six UART, three SPI, four I2C, USB-FS, and CAN-FD. The device also integrates a Cryptographic Engine, a Random Number Generator, and an RTCC. Technically, the PIC32MK1024GPD064T-I/MR uses a Harvard architecture with separate instruction and data paths, dual partition Flash for live update, and a 32-channel DMA controller. The 12-bit ADC includes oversampling and a shared 1.5 MSPS SAR core; the motor-control PWM (MCPWM) supports up to 12 outputs with 250 ps edge resolution. Operating voltage is 2.3V to 3.6V, with a -40C to +85C industrial temperature range, and the chip is supplied in tape-and-reel. Typical applications include digital power conversion (DC-DC, PFC, inverters), field-oriented motor control (BLDC, PMSM), industrial PLC modules, and functional safety designs. The part is recommended for new motor-control and digital-power designs by Microchip. When designing with the PIC32MK1024GPD064T-I/MR, ensure adequate decoupling on AVDD rails (4.7 uF plus 0.1 uF ceramic) and route the analog ground plane to minimize ADC noise coupling. The 9x9 mm QFN has a thermal pad that must be soldered to a continuous ground plane for heat dissipation, especially at full 120 MHz with all peripherals active. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC32MK1024GPD064T-I/MR, including same-family PIC32MK variants and direct cross-brand equivalents not found in the manufacturer datasheet.

Cotización Contacto

PIC32MK1024GPD064T-I/PT

PIC32MK1024GPD064T-I/PT - 1MB Flash 120MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MK1024GPD064T-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller featuring a single-core running at 120 MHz, 1 MB (1M x 8) of embedded Flash, 256 KB of SRAM, and 4 KB of EEPROM, housed in a 64-pin TQFP (10x10 mm) package. It is part of the PIC32MK General Purpose and Motor Control (GP/MC) family, combining high computational throughput with a rich peripheral set engineered for digital signal processing, motor control, and industrial automation. Operating from a 2.2 V to 3.6 V supply, the device is rated for the industrial -40 °C to +85 °C temperature range and ships on Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals on one die. The PIC32MK family extends this architecture by combining a MIPS32 microAptiv core with floating-point unit (FPU), single-precision DSP extensions, and motor-control-focused peripherals, positioning the device at the boundary between general-purpose MCUs and dedicated DSP/motor-control controllers within the broader power-management and embedded-control semiconductor hierarchy. Key features include 120 MHz core operation, hardware FPU and DSP instructions, dual USB ports, multiple CAN-FD controllers, I2S audio interfaces, high-resolution PWM modules for motor control, 12-bit ADC modules with up to 42 analog inputs, and multiple SPI/UART/I2C channels. The 1 MB Flash enables large application footprints typical of motor-control firmware stacks and Industrial IoT applications, while the 256 KB SRAM supports demanding signal-processing buffers. An integrated crypto engine and true random number generator assist secure-communication deployments. Architecturally, the PIC32MK1024GPD064T-I/PT combines a deterministic MIPS32 microAptiv core with multiple dedicated analog and digital peripherals, including the MPLAB Harmony configurable logic and motor-control PWM. The 64-pin TQFP package exposes 52+ general-purpose I/O pins and is pin-compatible with the 64-pin QFN (9x9 mm) variant for design flexibility. Typical applications include BLDC and PMSM motor drives, industrial field-bus nodes (CAN-FD/Ethernet), digital signal processing front-ends, Industrial IoT edge controllers, and audio DSP systems. Engineers choose this part when deterministic real-time response, large on-chip memory, and integrated motor-control peripherals are required. When designing, ensure adequate decoupling with 100 nF ceramic capacitors placed near each power pin and a 10 µF bulk capacitor at the regulator output. For motor-drive designs, keep analog and power grounds separated and stitch them at a single star point under the IC to minimize PWM-induced noise coupling into ADC channels. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK1024GPD100-E/PT

PIC32MK1024GPD100-E/PT - 32-bit MCU, 1MB Flash, 120MHz | Microchip

The Microchip Technology PIC32MK1024GPD100-E/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core with an integrated Floating Point Unit (FPU) and DSP extensions, delivering up to 120 MHz CPU clock with microMIPS code compression support. The device integrates 1 MB of Flash program memory, 256 KB of SRAM, and 4 KB of EEPROM in a 100-pin TQFP (12x12 mm) package, targeting general-purpose and motor-control embedded designs. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals. Within the taxonomy, the PIC32MK belongs to the 32-bit MCU class, which itself belongs to microcontrollers, integrated circuits, and finally semiconductors. 32-bit MCUs such as the PIC32MK run complex C firmware, perform DSP-style arithmetic in single cycles, and serve as the supervisory brain in motor drives, industrial PLCs, and connected IIoT nodes. Key differentiating features include four 64-bit accumulators and single-cycle MAC (multiply-accumulate) with saturating and fractional math, making it well suited to real-time motor-control loops and digital signal processing. Two 32-bit core register files reduce interrupt latency, while up to 42 channels of 12-bit ADC deliver high-resolution analog sampling for multi-axis field-oriented motor control. The AEC-Q100 qualified (-E) temperature grade spans -40C to +125C, supporting automotive and harsh industrial environments. Architecturally, the PIC32MK1024GPD100 combines a Harvard-class MIPS32 core with DSP ASE extensions, dual register files for fast context switching, and a peripheral set tuned for motor control: PWM, quadrature encoder interfaces, multiple CAN-FD controllers, and high-resolution ADCs. The microMIPS instruction mode enables roughly 40 percent smaller code size versus standard MIPS32, expanding the effective Flash budget. Typical applications include industrial motor control (BLDC, PMSM, FOC drives), industrial automation and PLC modules, multi-channel CAN-FD automotive body and powertrain ECUs, IIoT edge nodes, and precision sensor-fusion controllers. The combination of 120 MHz performance, 1 MB Flash, and AEC-Q100 grade makes the device a strong fit for safety-critical and computationally intensive embedded systems. When designing with this device, allocate the ADC channels carefully: 42 channels compete with digital I/O on the 100-pin TQFP package, so pin mapping must be planned during schematic capture. Ensure external decoupling meets the 2.2 V to 3.6 V core-rail noise budget. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

Cotización Contacto

PIC32MK1024GPD100T-I/PT

PIC32MK1024GPD100T-I/PT - 120MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MK1024GPD100T-I/PT is a 32-bit MIPS32 microAptiv microcontroller running up to 120 MHz with 1 MB of Flash program memory, 256 KB of SRAM, and 4 KB of EEPROM, housed in a 100-pin TQFP (12x12 mm) package. The 'GPD' suffix denotes the general-purpose dual-motor-control variant with USB Full-Speed, multiple CAN-FD ports, and a rich analog set including up to 42 channels of 12-bit ADC and on-chip operational amplifiers. What is a PIC32MK MCU? The PIC32MK family is a high-performance line of 32-bit microcontrollers built on the MIPS32 microAptiv core with an integrated single-precision Floating Point Unit (FPU) and DSP extensions. PIC32MK devices combine general-purpose computation, advanced motor-control peripherals (PWM, QEI, DAC, op-amps), and industrial communication (CAN-FD, USB, I2S) on a single die, targeting motor control, industrial automation, and Industrial IoT (IIoT) applications. Key features of the PIC32MK1024GPD100T-I/PT include 120 MHz core operation, 1 MB ECC-protected Flash, 256 KB SRAM, 77 user I/O pins, USB 2.0 Full-Speed OTG, four I2C, six I2S, three SPI, four UART, and two CAN-FD interfaces. The analog subsystem provides up to 42 channels of 12-bit ADC with up to 3.75 MSps, four 12-bit DACs, four on-chip op-amps, and three analog comparators, enabling high-performance signal-chain integration without external components. The architecture pairs the microAptiv core with a 12-channel DMA controller, 8-bit/16-bit parallel master port, and a 16-channel motor-control PWM module with seven independent generators and 16-bit resolution. Hardware cryptographic accelerators are not present on this variant, but the device supports secure firmware update via bootloader and JTAG-based ICSP for in-circuit programming and debugging. Typical applications include industrial motor drives (BLDC, PMSM, stepper), industrial control PLCs, multi-channel CAN-FD node controllers, USB-connected industrial sensors, building automation gateways, and IIoT edge nodes. The wide operating temperature range (-40C to +85C for the I-grade part) and rich peripheral mix make the part equally at home in factory-floor equipment and commercial IoT devices. When designing with this device, allocate the 256 KB SRAM carefully across stack, heap, and DMA buffers; 1 MB Flash supports dual-bank live update via the runtime bootloader. The 100-pin TQFP gives access to all 77 I/O pins plus the full analog channel count, so layout decisions should prioritise short analog-trace routing and a solid ground pour under the QFN-style thermal pad area. This page synthesizes distributor pricing from DigiKey, Microchip-direct, and authorized sources, along with drop-in alternatives and design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC32MK1024GPE064-I/PT

PIC32MK1024GPE064-I/PT - 32-Bit 120MHz MCU, 1MB Flash, 64-TQFP | Microchip

The Microchip PIC32MK1024GPE064-I/PT is a 32-bit MIPS32 microAptiv PIC32MK general-purpose and motor-control microcontroller integrating 1MB of Flash, 256KB of SRAM and 4KB of EEPROM, packaged in a 64-pin TQFP (10x10 mm). It runs at up to 120MHz with an integrated single-precision FPU and is intended for motor control, industrial control and Industrial Internet of Things (IIoT) applications. The wide 2.2V to 3.6V supply range, on-chip USB 2.0 Full-Speed and CAN-FD peripherals, and rich analog front-end make it a single-chip solution for high-performance mixed-signal embedded designs. An MCU (microcontroller unit) is a self-contained computing subsystem that integrates a CPU core, program and data memory, non-volatile storage, and a configurable set of analog and digital peripherals on a single die. The PIC32MK family belongs to the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> mixed-signal MCU -> semiconductor IC. Combining deterministic real-time control with connectivity peripherals, it is positioned between 8-bit PIC16/PIC24 MCUs and higher-end Cortex-M7 parts in the Microchip portfolio. Key features include up to 120MHz CPU clock, 1MB ECC-protected Flash, 256KB SRAM, 4KB EEPROM, hardware FPU, four DMA channels, and a 12-bit 3.75MSPS ADC with up to 42 analog inputs. Connectivity includes USB 2.0 Full-Speed On-The-Go, two CAN-FD modules, six UART, four SPI, four I2C, and up to 53 general-purpose I/O pins. The integrated op-amps, comparators and high-resolution PWM (250 ps) target digital power conversion and field-oriented motor control. The device uses the MIPS32 microAptiv core with a five-stage pipeline, branch prediction and single-cycle MAC, paired with a hardware FPU. ECC on Flash and SRAM increases reliability for industrial-grade deployments. The result is a deterministic real-time MCU capable of closing tight control loops while still running application code, protocol stacks and an embedded web server simultaneously. Typical applications include field-oriented control (FOC) of BLDC and PMSM motors, multi-axis servo drives, solar inverters, industrial PLCs, building automation gateways, and USB/CAN-connected sensor hubs. The on-chip 12-bit 3.75MSPS ADC and analog comparators simplify mixed-signal front-end designs, while the 250 ps PWM enables high-resolution digital power conversion. When designing with this device, allocate sufficient decoupling (100 nF + 10 uF near each VDD/VSS pair), follow Microchip's recommended 4-layer PCB stack-up for the 64-TQFP exposed-pad variant, and use MPLAB Harmony 3 code-configurator for peripheral setup. Firmware must initialize the FPU bits in the CP0 register and configure the PLL with an external crystal reference before peripheral bring-up. This page synthesizes distributor pricing, pin-compatible alternatives and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop reference for selecting the PIC32MK1024GPE064-I/PT.

Cotización Contacto

PIC32MK1024GPE100-I/PT

PIC32MK1024GPE100-I/PT - 120MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MK1024GPE100-I/PT is a 32-bit MIPS32 microAptiv PIC MCU running at 120 MHz with 1 MB Flash, 256 KB SRAM, and 4 KB EEPROM, integrated into a 100-pin TQFP (12x12x1 mm) package for motor control, industrial automation, and IIoT designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working SRAM, and programmable peripherals around a common bus. The PIC32MK family extends the PIC32 architecture by adding a hardware FPU, DSP extensions, dedicated motor-control PWMs, 12-bit high-speed ADCs, and a multi-channel CAN-FD interface, targeting closed-loop motor drives and Industrial Internet of Things (IIoT) gateway nodes. The '100' suffix indicates the highest pin count and richest peripheral mix in the family. Key features include a 120 MHz core with single-cycle multiply and hardware divide, dual 12-bit ADCs at up to 3.75 Msps suitable for field-oriented control current sensing, dedicated motor-control PWMs with up to 1.1 ns resolution, four I2C, six I2S, USB 2.0 Full-Speed OTG, and two CAN 2.0B modules. The 1 MB Flash supports full-duplex execution from one panel while the other panel programs in the background via Live Update, eliminating in-field downtime for firmware changes. The device is built on a 65 nm CMOS process and operates from 2.3 V to 3.6 V, with industrial-grade -40C to +85C ambient support (the I-suffix variant). The 100-TQFP package exposes 79 I/O, of which many are 5V-tolerant for legacy signal compatibility, simplifying interface to industrial 24 V signal conditioning front-ends through external translators. Typical applications include three-phase PMSM/BLDC motor drives for industrial servo and e-bike traction, factory automation PLCs, IIoT gateways with CAN-FD backbone connectivity, HVAC compressor controllers, and solar inverter MPPT stages where deterministic DSP-class throughput is required. Engineers migrating from dsPIC33 should evaluate the PIC32MK as a unified platform that combines control loops, communication stacks, and HMI rendering on a single die. When designing with the PIC32MK1024GPE100, ensure that decoupling follows the reference layout pattern of one 100 nF per power pin and one bulk 4.7 uF per supply rail. The on-chip LDO requires an external 2.2 uF low-ESR capacitor on VCORE; omitting it triggers erratic operation at full DSP load. Route the analog VDD/VSS pair separately from the digital rails and isolate the ADC reference pins with ferrite beads for optimal ADC SNR at full sampling rate. This page synthesizes Microchip catalog data, distributor pricing, and verified drop-in alternatives, plus practical layout notes not found in the standalone datasheet - a unique combination of cross-reference, parametric comparison, and design guidance for engineers selecting a 32-bit MCU for motor-control or industrial-automation platforms.

Cotización Contacto

PIC32MK1024GPE100T-I/PT

PIC32MK1024GPE100T-I/PT - 32-Bit 120MHz MCU 1MB Flash 100-TQFP | Microchip

The Microchip PIC32MK1024GPE100T-I/PT is a high-performance 32-bit microcontroller from the PIC32MK General Purpose (GP) family, featuring a MIPS32 microAptiv core with FPU and DSP extensions running at 120 MHz, combined with 1 MB of Flash program memory, 256 KB of RAM, and 4 KB of Data EEPROM. It is housed in a 100-pin TQFP (12x12x1 mm) package rated for the industrial -40C to +85C temperature range and ships on tape and reel for high-volume SMT assembly. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. Within the embedded system hierarchy, a 32-bit MCU like the PIC32MK sits above 8/16-bit MCUs (PIC16, PIC24) and below application processors, balancing deterministic real-time performance with low power and integrated analog for motor control, industrial, and IIoT applications. The microAptiv core's FPU and DSP instructions accelerate closed-loop math, while the integrated motor-control PWM peripherals target field-oriented control (FOC) of three-phase motors. Key features of the PIC32MK1024GPE100 include a 120 MHz core with 1.56 DMIPS/MHz performance, four I2C and six I2S interfaces, USB Full-Speed, CAN 2.0B, 12-bit ADC, multiple PWM channels optimized for motor control, and ECC-protected Flash for safety-critical applications. The 100-pin variant exposes the maximum GPIO and peripheral count of the family, suiting designs that need both high pin count and rich analog/mixed-signal integration. ECC memory and a hardware CRC engine further support functional safety designs. Typical applications include industrial motor control (BLDC, PMSM, ACIM), industrial automation and PLC modules, multi-channel CAN-connected IIoT nodes, building automation HVAC controllers, and USB/CAN gateway designs. When designing with this MCU, verify your debugger/programmer supports the 100-pin variant's specific PGECx/PGEDx pairs and ensure the 12x12 mm TQFP land pattern is sized correctly for thermal dissipation at full 120 MHz operation.

Cotización Contacto

PIC32MK1024GPK064-E/MR

PIC32MK1024GPK064-E/MR - 120MHz MCU, 1MB Flash, USB FS | Microchip

The Microchip PIC32MK1024GPK064-E/MR is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz, integrating 1 MB of ECC-protected Flash and 256 KB of SRAM in a 64-pin QFN (9x9 mm) package. It combines a single-precision/double-precision hardware Floating Point Unit (FPU), DSP extensions including four 64-bit accumulators and a single-cycle MAC, and MicroMIPS code compression delivering up to 40% smaller code size. The device integrates USB 2.0 Full-Speed, multiple CAN-FD controllers, 12-bit ADCs with up to 5 MSPS sampling, analog comparators, and a rich motor-control-oriented PWM peripheral set targeting field-oriented control (FOC) of brushless DC and PMSM motors. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. The PIC32MK belongs to the 32-bit MCU family within the broader embedded processor hierarchy (MCU -> embedded processor -> semiconductor), and it is specifically an application-specific variant aimed at motor control, industrial automation, and Industrial Internet of Things (IIoT) applications. As a Cortex-M4-class alternative with on-chip FPU and DSP, it occupies the high-performance tier of 32-bit microcontrollers. Key features include four 12-bit ADC pairs with dedicated Sample-and-Hold for simultaneous current/voltage sensing in FOC loops, four operational amplifiers for motor current amplification, eight programmable comparators, and dual CAN-FD ports enabling high-bandwidth industrial communication. Hardware cryptographic acceleration is absent, but the DSP extensions and FPU accelerate complex math in real-time control loops. The 1 MB dual-panel Flash supports Live Update, allowing firmware swap without CPU stall. Typical applications include industrial motor control, multi-channel BLDC/PMSM motor drives, industrial automation controllers, IIoT edge nodes, and industrial USB peripherals. The wide operating temperature range of -40C to +125C makes the part suitable for harsh industrial environments, while the USB Full-Speed and CAN-FD interfaces simplify integration into industrial networking topologies. When designing with this part, allocate PCB copper area beneath the QFN-64 exposed pad (EP) for thermal dissipation; the device draws up to approximately 100 mA active. Plan decoupling capacitors per Microchip ANTC23C guidelines, and use a 12 MHz crystal or external clock reference. This page synthesizes distributor pricing, drop-in alternative MPNs, and application-specific design notes not consolidated in the Microchip datasheet, enabling faster BOM decision-making for industrial and motor-control designs.

Cotización Contacto

PIC32MK1024GPK064-E/PT

PIC32MK1024GPK064-E/PT - 120MHz, 1MB MCU, 64-TQFP | Microchip

The Microchip Technology PIC32MK1024GPK064-E/PT is a 32-bit MIPS microAptiv microcontroller running at 120 MHz, equipped with 1 MB of ECC-protected Flash and 256 KB SRAM, packaged in a 64-pin TQFP (10x10 mm). The device integrates a single/double-precision hardware Floating Point Unit, four 64-bit accumulators, single-cycle MAC with saturating and fractional arithmetic, and MicroMIPS mode delivering up to 40% smaller code size. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. The PIC32MK family belongs to the broader hierarchy: 32-bit MCU -> embedded controller -> microcontroller -> semiconductor. This class targets motor control, industrial automation, and Industrial IoT (IIoT) applications requiring deterministic DSP performance and floating-point math at moderate clock speeds. Key differentiating features include dual-panel 1 MB Flash supporting Live Update for field-firmware swap without downtime, two USB Full-Speed ports, four 12-bit ADC modules with up to 42 analog inputs total, multiple DAC outputs, op-amps, and comparators for analog front-end integration. The 120 MHz core with hardware MAC widens DP-SSIM, FOC motor-control loops with sub-microsecond cycle time. Dedicated PWM channels with 7.5 ns resolution enable direct driving of three-phase motor inverters and digital power converters. Architecturally, the PIC32MK1024GPK064 uses the MIPS32 microAptiv core with DSP extensions, dual-issue pipeline, and tightly coupled prefetch buffer. The integrated FPU accelerates single- and double-precision IEEE-754 math without software emulation overhead, allowing direct C-code compilation of sensor-fusion and control algorithms. ECC on Flash and parity on SRAM deliver IEC 60730 Class B safety readiness for white goods and industrial equipment. Typical applications include BLDC and PMSM motor drives, solar inverters, factory-automation PLCs, industrial sensor hubs, and IIoT edge nodes. The dual-USB and CAN-FD-ready peripheral set also suits HMI panels and multi-protocol industrial bridges. Designers choose this MCU when deterministic real-time DSP, on-chip analog, and field-updatable firmware are required. Design consideration: Live Update requires both Flash panels to contain valid firmware; designers must size the application under 512 KB per panel to enable in-field bank swap. Decoupling must use 100 nF X7R per VDD/VSS pair plus 4.7 uF bulk. This page synthesizes distributor pricing, drop-in TQFP-64 alternatives, application-specific design notes, and a parametric comparison not collated on any single distributor page, providing information gain beyond the manufacturer datasheet.

Cotización Contacto

PIC32MK1024GPK064-I/MR

PIC32MK1024GPK064-I/MR - 120MHz, 1MB Flash MCU w/ DSP FPU | Microchip

The Microchip Technology PIC32MK1024GPK064-I/MR is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core running at 120MHz, integrating a single/double-precision Floating Point Unit (FPU), a 4x 64-bit accumulator DSP engine with saturating and fractional MAC support, four DMA-driven analog comparators, and 1MB of dual-panel ECC-protected Flash in a 64-pin QFN (9x9 mm) package. It targets motor control, industrial control, and Industrial IoT (IIoT) multi-channel sensing applications where deterministic DSP performance and robust memory integrity are essential. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, PWM, communication interfaces, timers) on a single silicon die. Within the broader system hierarchy, an MCU sits below an MPU (microprocessor) and above DSPs and ASSPs for embedded control; in the PIC32MK family the core is augmented with a microAptiv pipeline, hardware multiply/divide, optional FPU, and a DSP extension that allows C-code motor-control loops to execute at deterministic latency. Key features include 120MHz CPU clock, 1MB ECC Flash with live update, 256KB SRAM, USB Full-Speed (Host/Device/OTG), CAN-FD, four 12-bit ADCs with up to 42 analog inputs and 2MSPS aggregate sampling rate, multiple 16-bit PWM channels with 100ps resolution for high-resolution motor control, and Microchip's MPLAB Harmony ecosystem support. MicroMIPS mode delivers up to 40% smaller code size for the same functionality. Architecturally, the dual-panel Flash allows live-update firmware (running from one panel while programming the other), and the four 64-bit accumulators enable single-cycle MAC operations on 16-bit fixed-point data. This combination makes the device attractive for FOC (field-oriented control) of PMSM/BLDC motors, multi-channel power conversion, and DSP-augmented IIoT edge nodes. Typical applications include BLDC/PMSM motor drives (FOC with HRPWM), industrial sensor hubs, multi-channel data acquisition systems, IIoT edge controllers, and USB/CAN-FD connected industrial nodes. The 64-QFN MR package provides a compact thermal-efficient footprint suited to space-constrained industrial PCBs. When designing with this device, prioritize MPLAB X IDE + XC32 compiler + Harmony framework, ensure VDD/AVDD decoupling per the datasheet reference circuit, and confirm the 9x9 mm QFN land pattern supports your PCB process window (the exposed pad must be soldered to a continuous ground plane for thermal dissipation). This page synthesizes distributor pricing, drop-in same-family alternatives, datasheet anchors, and design notes that complement the manufacturer datasheet rather than simply restating it.

Cotización Contacto

PIC32MK1024GPK064-I/PT

PIC32MK1024GPK064-I/PT - 120MHz, 1MB Flash MCU | Microchip

The Microchip Technology PIC32MK1024GPK064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, running up to 120 MHz, with 1 MB of ECC-protected Flash and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. The device integrates a rich peripheral set designed for motor control, industrial control, and Industrial Internet of Things (IIoT) applications, and includes dual USB 2.0 Full-Speed On-The-Go (OTG) controllers with integrated transceivers. A 32-bit microcontroller (MCU) is a system-on-chip containing a processor core, program and data memory, and a configurable set of peripherals such as timers, ADCs, communication controllers, and GPIO. Within the broader taxonomy, this part belongs to the PIC32 family of MIPS-based MCUs, itself a sub-family of Microchip's PIC microcontroller line, which sits within the Embedded > Microcontrollers segment of integrated circuits. The PIC32MK GPK series specifically targets general-purpose and motor-control designs that previously required a DSP. Key features of the PIC32MK1024GPK064 include a single-precision Floating-Point Unit (FPU), MicroMIPS mode for 40% smaller code size, four 64-bit accumulators, a single-cycle MAC for saturating and fractional math, 5V-tolerant I/O with up to 22 mA source/sink, and selectable internal pull-ups, pull-downs, and open-drain modes. The device integrates multiple high-speed analog peripherals including 12-bit ADCs with up to 3.5 Msps sampling, high-speed analog comparators, and DAC outputs, all tuned for closed-loop PWM motor control. Communication interfaces include dual USB FS OTG, CAN FD (in the MCJ variant - note GPK has no CAN-FD per Future Electronics), multiple UART/SPI/I2C, and a Parallel Master Port. Memory options include 1 MB Dual-Panel Flash with Live Update support and 4 KB EEPROM emulation. A cryptographic engine and true random number generator (TRNG) are integrated for secure IIoT deployments. Typical applications include BLDC and PMSM motor drives (FOC), industrial PLCs, multi-channel sensor acquisition systems, solar inverter controllers, and IIoT edge nodes. The TQFP-64 footprint and -40C to +85C industrial temperature grade (-I suffix) make it a drop-in upgrade path for designs migrating from PIC32MX parts. When designing with this device, place the dual USB bus capacitors within 5 mm of the VUSB pins, and observe the VDD/VSS pairing requirement of one bulk cap per pin pair. Use Microchip's Harmony configurator to map peripherals to specific PPS pins and avoid pin conflicts on this 64-pin TQFP layout. This page synthesizes XAIPART distributor pricing, drop-in PIC32MK GPK family alternatives, and practical PCB layout guidance not found in the standalone manufacturer datasheet.

Cotización Contacto

PIC32MK1024GPK064T-E/MR

PIC32MK1024GPK064T-E/MR - 120MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MK1024GPK064T-E/MR is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 120 MHz with an integrated Floating Point Unit (FPU) that supports single and double precision math. It integrates 1 MB of ECC-protected dual-panel Flash (1M x 8), and is housed in a 64-pin QFN (MR) 9x9 mm package with industrial-grade -40C to +125C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash, SRAM), and programmable peripherals. The PIC32MK family sits within Microchip's MIPS32 portfolio and is designed for real-time control applications where floating-point performance, large memory, and deterministic interrupt handling are required. The microAptiv core supports MicroMIPS mode, which compresses instructions to deliver roughly 40% smaller code density compared to standard MIPS32, allowing engineers to fit more functionality into the 1 MB Flash budget. Key features include four 64-bit accumulators with a single-cycle MAC for saturating and fractional DSP math, dual-panel Flash with live update for field-firmware swap without downtime, hardware floating-point unit, ECC-protected memory for safety, and a comprehensive analog/digital peripheral set. The device also integrates USB Full Speed, multiple UART/SPI/I2C interfaces, 12-bit ADC modules, and motor-control PWMs. Architecturally, the PIC32MK combines a high-speed 120 MHz MIPS32 pipeline with DSP extensions (four 64-bit accumulators, single-cycle MAC) and an IEEE 754 floating-point unit, making it suitable for closed-loop control loops and signal processing. The dual-panel Flash subsystem allows one panel to run while the other is being updated, supporting robust firmware-over-the-air (FOTA) upgrades in industrial systems. ECC on Flash and SRAM improves reliability in noisy electrical environments such as motor-drive stages. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, industrial automation controllers, multi-channel data acquisition, IIoT edge nodes, and digital power conversion. The 120 MHz core, FPU, and DSP extensions enable real-time field-oriented control (FOC) of three-phase motors without offloading math to a separate DSP. The 12-bit ADCs and high-resolution PWMs are tuned for current-sense sampling and switch-mode power-supply control loops. When designing with this device, ensure the high-speed oscillator is properly decoupled and that the dual-panel Flash programming model is respected to avoid accidental corruption during live-update operations. For migration between the -E (extended temperature) and -I (industrial temperature) variants, only the operating temperature range differs, so firmware is fully reusable.

Cotización Contacto

PIC32MK1024GPK064T-I/PT

PIC32MK1024GPK064T-I/PT - 120MHz 32-bit MCU, 1MB Flash, TQFP-64

The Microchip Technology PIC32MK1024GPK064T-I/PT is a 32-bit MIPS32 microAptiv PIC32MK general-purpose microcontroller running at 120 MHz, integrating 1 MB of ECC-protected Flash and 256 KB of SRAM in a 64-pin TQFP (10x10 mm) industrial-temperature package. It is part of the PIC32MK GP family, which combines high-performance CPU cores with a rich analog and digital peripheral set targeting motor control, industrial control, and Industrial IoT (IIoT) applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, timers, communication ports, GPIO). The PIC32MK family belongs to the 32-bit microcontroller hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MK family. PIC32MK devices bridge the gap between 8/16-bit PIC MCUs and higher-end Cortex-M parts, offering deterministic interrupt response, single-cycle MAC DSP instructions, and DSP-oriented peripheral connectivity. Key features of the PIC32MK1024GPK064T-I/PT include a 120 MHz MIPS32 microAptiv core with single-cycle MAC, four 12-bit ADC modules providing up to 42 analog inputs at 3.75 MSPS, six UART, four SPI, four I2C, two CAN 2.0B, two USB Full-Speed (Host/Device/OTG), and a 16-bit Parallel Master Port (PMP). It also integrates a crypto engine, RTCC, four 16-bit/32-bit capture/compare timers, and a 32-bit deadman timer for safety-critical control loops. ECC on Flash and RAM improves reliability in electrically noisy industrial environments. Architecturally, the PIC32MK uses a 5-stage pipeline microAptiv core with DSP ASE support, enabling single-cycle 32x32 MAC operations. The device operates from 2.3V to 3.6V and supports industrial temperature range (-40C to +85C). The 64-pin TQFP package offers generous GPIO (up to 53) plus analog and dedicated peripheral pins, suitable for through-hole or socketed designs. Typical applications include 3-phase motor control (BLDC, PMSM, FOC), industrial PLC modules, multi-channel data acquisition systems, USB-connected industrial sensors, IIoT edge nodes, and power-conversion digital controllers. The dual USB and dual CAN make it well suited to networked industrial equipment. The two CAN ports allow bridging of independent industrial buses without an external transceiver controller. A key design consideration is proper decoupling: place 100 nF ceramic capacitors near each VDD/VSS pair and a bulk 4.7-10 uF tantalum or ceramic capacitor on the main supply rail. Designers should also enable the JTAG boundary scan in development and use the built-in crypto engine for secure firmware authentication. The PIC32MK1024GPK064T-I/PT supports MPLAB Harmony v3 and the MPLAB XC32 compiler for software development. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK1024GPK100-I/PT

PIC32MK1024GPK100-I/PT - 120MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MK1024GPK100-I/PT is a high-performance 32-bit microcontroller built around the microAptiv MIPS32 core running at 120 MHz with integrated single-cycle MAC, double-precision FPU, and MicroMIPS compressed-instruction mode. The Housed in a 100-pin TQFP (12x12 mm) package, the part delivers 1 MB of ECC-protected dual-panel Flash and 256 KB of SRAM for industrial-grade motor control, IIoT, and multi-channel analog applications. The Supply voltage operates from 2.3 V to 3.6 V, with up to 78 user I/O lines and a maximum supply current of 30 mA. A 32-bit microcontroller (MCU) is a programmable embedded processor integrating CPU, memory, and peripherals on a single die. MCUs belong to the broader class of microprocessors and form the lowest tier of the compute hierarchy (microprocessor -> microcontroller -> SoC). The PIC32MK family targets deterministic real-time control, with on-chip DSP extensions, four 64-bit accumulators, single-cycle MAC supporting saturating and fractional math, and hardware support for IEEE 754 single and double precision floating-point. These capabilities extend the taxonomy: 32-bit MCU -> Cortex-M-class performance tier -> industrial control MCU. Key features of the PIC32MK1024GPK100-I/PT include 1 MB dual-panel Flash with ECC and live update, 256 KB SRAM, a 12-bit multi-channel ADC, USB Full-Speed, and CAN-FD connectivity. The dual-panel Flash enables live firmware updates without CPU stall. The 24-bit address bus and 16-bit external data bus allow expansion to external memories for high-end applications. The integrated DSP engine removes the need for a companion DSP in motor control and power-conversion loops. Architecturally, the PIC32MK1024GPK100 uses a MIPS32 microAptiv core with hardware FPU, four 64-bit accumulators, and 40% code-density savings in MicroMIPS mode. ECC on Flash and SRAM improves reliability in harsh environments, while the 12-bit 7.6 MSPS ADC enables precise current/voltage sampling for FOC motor control and power-factor correction. Integrated op-amps and comparators further reduce BOM cost for analog front-ends. Typical applications include Field-Oriented Control (FOC) of PMSM/BLDC motors, industrial PLCs, multi-phase power-conversion inverters, IIoT sensor hubs, USB-connected data acquisition systems, and CAN-FD automotive body/comfort modules. The combination of DSP, FPU, and dual-panel Flash makes it especially suitable for code-intensive motor-control algorithms and predictive maintenance use cases. A key design consideration is thermal management: at maximum CPU load the device can dissipate up to 200 mW; the 100-pin TQFP provides adequate copper area for industrial temperature ranges. Engineers should also pair this part with external watchdog supervision and consider the 78 I/O budget carefully, as motor-control PWM modules and analog inputs compete for the same pins. This page synthesizes distributor pricing, same-package drop-in variants, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

Subcategorías

Productos (32776)

PIC32MK0512MCM064T-E/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip

PIC32MK0512MCM064T-E/PT - 120MHz 512KB MCU, USB FS, CAN-FD | Microchip

PIC32MK0512MCM064T-I/MR - 120MHz MCU 512KB Flash 64-QFN | Microchip

PIC32MK0512MCM064T-I/PT - 120MHz MCU 512KB Flash Motor Control TQFP-64

PIC32MK0512MCM100-E/PT - 120MHz MCU 512KB Flash 100-TQFP | Microchip

PIC32MK0512MCM100-I/PT - 120MHz MCU, 512KB Flash, Motor Control | Microchip

PIC32MK0512MCM100T-E/PT - 120MHz 512KB Flash MCU TQFP-100

PIC32MK0512MCM100T-I/PT - 120MHz, 512KB ECC Flash MCU | Microchip

PIC32MK1024GPD064-E/PT - 120MHz FPU MCU 1MB Flash TQFP-64 | Microchip

PIC32MK1024GPD064-I/PT - 32-Bit MCU, 120MHz, 1MB Flash, 64-TQFP | Microchip

PIC32MK1024GPD064T-I/MR - 120MHz MCU, 1MB Flash, 64-QFN | Microchip

PIC32MK1024GPD064T-I/PT - 1MB Flash 120MHz 32-bit MCU | Microchip

PIC32MK1024GPD100-E/PT - 32-bit MCU, 1MB Flash, 120MHz | Microchip

PIC32MK1024GPD100T-I/PT - 120MHz 1MB Flash 32-bit MCU | Microchip

PIC32MK1024GPE064-I/PT - 32-Bit 120MHz MCU, 1MB Flash, 64-TQFP | Microchip

PIC32MK1024GPE100-I/PT - 120MHz 1MB Flash MCU | Microchip

PIC32MK1024GPE100T-I/PT - 32-Bit 120MHz MCU 1MB Flash 100-TQFP | Microchip

PIC32MK1024GPK064-E/MR - 120MHz MCU, 1MB Flash, USB FS | Microchip

PIC32MK1024GPK064-E/PT - 120MHz, 1MB MCU, 64-TQFP | Microchip

PIC32MK1024GPK064-I/MR - 120MHz, 1MB Flash MCU w/ DSP FPU | Microchip

PIC32MK1024GPK064-I/PT - 120MHz, 1MB Flash MCU | Microchip

PIC32MK1024GPK064T-E/MR - 120MHz 1MB Flash 32-bit MCU | Microchip

PIC32MK1024GPK064T-I/PT - 120MHz 32-bit MCU, 1MB Flash, TQFP-64

PIC32MK1024GPK100-I/PT - 120MHz 1MB Flash MCU | Microchip