Circuitos integrados

PIC32MK1024MCF064-E/MR

PIC32MK1024MCF064-E/MR - 32-bit MCU, 1MB Flash, Motor Control 64-QFN | Microchip

The Microchip Technology PIC32MK1024MCF064-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller integrating 1MB of Flash program memory and 256KB of RAM in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. It runs up to 80 MHz in the -E (extended) temperature grade variant, while the -I industrial variant supports up to 120 MHz, and combines a DSP-enhanced CPU core with a high-performance analog and motor-control peripheral set. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADCs, PWM, communication interfaces, timers) into one IC. Within the broader taxonomy, the PIC32MK belongs to the MIPS32 microAptiv family, which itself sits inside the 32-bit MCU segment of microcontrollers, a superset of the embedded processor category. PIC32MK devices specifically target deterministic real-time control applications with DSP extensions, hardware math accelerators, and high-resolution PWM generators. Key specifications include a MIPS32 microAptiv core with DSP and FPU, four on-chip op-amps, four 12-bit ADC modules (with up to 42 analog input channels total), six dedicated PWM channels with 1 ns resolution, four I2C, six I2S, USB 2.0 Full-Speed, two CAN 2.0B controllers, and a 32-bit quadrature encoder interface (QEI). The device operates from 2.3V to 3.6V and is offered in extended (-40C to +125C) temperature grade in this -E/MR variant, making it suitable for harsh industrial and automotive environments. Typical applications include Field-Oriented Control (FOC) of PMSM/BLDC motors, industrial servo drives, robotic actuators, multi-channel CAN-FD node controllers, and digital power conversion stages. Its combination of math acceleration, 12-bit ADCs, and high-resolution PWM makes it a strong fit for sensorless FOC at switching frequencies above 100 kHz. Design with this device requires careful PCB layout: the 64-QFN exposed pad must be soldered to a sufficiently large ground copper pour to meet the 31 C/W theta_JA rating, and decoupling should be placed close to each VDD pin pair. When migrating designs, note that the recommended alternative is PIC32MK1024MCM064 (per Microchip's product page), which offers higher pin count and more peripherals in a 100-pin package.

Cotización Contacto

PIC32MK1024MCF064-E/PT

PIC32MK1024MCF064-E/PT - 80MHz 32-bit MCU 1MB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MK1024MCF064-E/PT is a 32-bit RISC microcontroller based on the MIPS32 microAptiv core, operating up to 80 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package and qualified to the automotive -40C to +125C temperature grade. It targets high-performance motor control and industrial applications where deterministic PWM, fast ADC sampling, and rich connectivity are essential. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a peripheral set around the system bus. PIC32MK devices extend Microchip's PIC32 architecture with the MIPS32 microAptiv core, ECC-protected Flash, and dedicated motor-control peripherals including high-resolution PWM, op-amps, and comparators that simplify field-oriented control (FOC) loops. Within the broader hierarchy, the PIC32MK belongs to microcontrollers -> 32-bit MCUs -> embedded microcontrollers -> integrated circuits -> semiconductors. Key features include a 7-channel 12-bit ADC with up to 28 dedicated inputs, 6 CCP/PWM outputs with 2.5 ns resolution, integrated op-amps and comparators, USB 2.0 Full-Speed OTG, CAN, I2S, SPI, I2C, and 256 KB of SRAM. The 80 MHz core delivers 101 DMIPS, while the dedicated motor-control PWM operates independently from the CPU for deterministic switching. ECC on Flash improves functional safety for automotive and industrial systems subject to soft-error disturbances. Architecture: The microAptiv core is a 5-stage pipeline with hardware multiply/divide, single-precision FPU option, and tightly-coupled peripherals. The 1 MB ECC Flash supports live update and dual-panel operation, which is essential for field-deployed industrial and automotive firmware. The peripheral set is bus-matrixed to minimize latency for time-critical motor-control events. Typical applications include BLDC/PMSM motor drives, industrial servo control, solar inverters, EV charging stations, and industrial IoT edge controllers. The integrated op-amps directly sense motor phase currents without external amplifiers, reducing BOM cost and PCB area in 3-phase FOC designs. When designing with this device, place decoupling capacitors (100 nF ceramic plus 4.7 uF bulk) within 3 mm of every VDDCORE/VSS pair, and use a 4-layer PCB with a dedicated ground plane. The 64-pin TQFP leaves several analog functions un-bonded on lower-pin packages; route analog inputs away from switching traces to preserve ADC SNR. This page synthesizes distributor pricing, parametric drop-in substitutes, and practical motor-control design notes not consolidated in the manufacturer datasheet alone, helping engineers evaluate the PIC32MK1024MCF064-E/PT for automotive and industrial designs.

Cotización Contacto

PIC32MK1024MCF064-I/MR

PIC32MK1024MCF064-I/MR - 120MHz 1MB Flash Motor Control MCU | Microchip

The Microchip Technology PIC32MK1024MCF064-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz with 1 MB of Flash memory and 256 KB of RAM, housed in a 64-pin QFN (9x9 mm) exposed-pad package. It is purpose-built for motor control, industrial control, and Industrial Internet of Things (IIoT) applications, integrating high-resolution PWM, multiple analog comparators, 12-bit ADC, CAN, USB Full-Speed, I2S, and ECC-protected Flash. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (Flash), data memory (RAM), and a rich set of programmable peripherals on a single die. The PIC32MK family sits within the broader hierarchy of microcontroller -> embedded controller -> semiconductor device, and the microAptiv core provides deterministic interrupt response suited to closed-loop control loops. ECC-protected Flash is increasingly important for industrial safety certifications such as IEC 61508 SIL-2 paths. Key differentiating features of the PIC32MK1024MCF064-I/MR include six I2S channels (versus four on most PIC32MX parts), four I2C ports, CAN 2.0B, USB Full-Speed, a 12-bit multi-channel ADC, dedicated motor-control PWMs with complementary outputs and dead-time insertion, and 1 MB of Flash that allows substantial field-upgradeable firmware. The 120 MHz core delivers 198 DMIPS and 3.75 CoreMark/MHz class performance for real-time control math. Architecturally, the device uses the MIPS32 microAptiv M4K-class core with single-cycle MAC, hardware multiply/divide, and tightly-coupled peripherals such as the 12-bit 6.4 Msps ADC and the motor-control PWM (MCPWM) with up to 1.04 ns resolution at 120 MHz. ECC on Flash and parity on RAM support functional-safety designs. Typical applications include field-oriented control (FOC) of 3-phase PMSM and BLDC motors, industrial PLC I/O modules, IIoT sensor nodes with CAN or USB connectivity, multi-axis servo drivers, and digital power conversion stages. When designing with this MCU, allocate sufficient PCB copper under the exposed pad for thermal dissipation, since high PWM switching can drive significant core current. Decouple AVDD and VDD separately with 100 nF + 10 uF ceramic capacitors placed within 3 mm of the package pins. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes curated from the Microchip PIC32MK family datasheet and reference manuals, with parametric cross-references not found on any single manufacturer or distributor page.

Cotización Contacto

PIC32MK1024MCF064T-I/MR

PIC32MK1024MCF064T-I/MR - 32-Bit MCU 120MHz 1MB Flash | Microchip

The Microchip Technology PIC32MK1024MCF064T-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC operating at 120 MHz, integrating 1 MB of Flash program memory and 256 KB of SRAM in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. The device targets high-performance motor control, industrial control, and Industrial Internet of Things (IIoT) applications requiring rich connectivity. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, ADCs, communication controllers, and GPIO. Within the broader hierarchy, the PIC32MK family sits under 32-bit MCUs, then microcontrollers, then embedded processors, then semiconductors. The MIPS32 microAptiv core is a Harvard-architecture RISC processor with single-cycle multiply/accumulate and hardware DSP extensions, giving the PIC32MK family FPU-class signal-processing capability for closed-loop motor control algorithms. Key differentiating features include a 120 MHz core with FPU and DSP instructions, 1 MB ECC-protected Flash and 256 KB SRAM, four independent ADC cores totaling 28 channels at 12-bit resolution, multiple CAN, I2C, SPI, UART, and USB interfaces, and PWM outputs specifically designed for multi-axis motor drive stages. According to Microchip product page data, the 64-QFN package has a 9x9 mm footprint with an exposed pad that must be soldered for thermal dissipation. Architecture-wise, the PIC32MK1024MCF064 pairs the microAptiv core with a multi-channel motor-control PWM module, quadrature encoder interfaces, and dual analog comparators. This combination supports field-oriented control (FOC) of PMSM, BLDC, and stepper motors without external DSP or FPGA assistance. The high peripheral-to-core ratio is intended to let engineers consolidate what is typically a multi-chip motor drive solution into one device. Typical applications include industrial servo drives, multi-axis BLDC motor controllers, IIoT edge nodes with CAN-FD communication, automotive body and chassis ECUs, and high-density USB/CAN sensor hubs. When designing with this MCU, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal dissipation requirements, and place the decoupling capacitors as close as possible to the supply pins to support the 120 MHz core switching transients. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MK family, and practical motor-control design guidance not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK1024MCF100T-I/PT

PIC32MK1024MCF100T-I/PT - 120MHz 32-bit MCU 1MB Flash 100-TQFP

The Microchip Technology PIC32MK1024MCF100T-I/PT is a 32-bit MIPS32 microAptiv microcontroller MCU running at 120 MHz with 1 MB of Flash and 256 KB of SRAM, packaged in a 100-pin TQFP (12x12 mm). It belongs to the PIC32MK General Purpose and Motor Control (GP/MC) family with FPU and DSP extensions, integrating a 120 MHz core alongside a rich analog and communications peripheral set. The device is specified for the industrial temperature range (-40C to +85C) and is supplied in tape and reel packaging (the trailing 'T' denotes T&R). A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, volatile and non-volatile memory, and programmable peripherals on a single silicon die. PIC32MK MCUs specifically combine the MIPS32 microAptiv core with single-precision IEEE-754 floating-point, MAC instructions for DSP workloads, and a dual CAN 2.0B interface for industrial networking. Within Microchip's portfolio, PIC32MK sits between the lower-pin PIC32MX family and the higher-end PIC32MZ family, targeting motor control and industrial control designs where deterministic CAN communication is required. Key features include four I2C ports, six I2S channels, USB Full-Speed, dual CAN-FD capable CAN 2.0B controllers, a 12-bit ADC with up to 42 analog inputs, and dedicated motor-control PWM peripherals. The 1 MB dual-bank Flash supports Live-Update firmware, allowing in-field firmware swap without downtime - a critical capability for industrial IIoT gateways and motor-drive controllers. The 256 KB SRAM is partitioned to support both general-purpose and DMA-driven motor-control data paths. The architecture combines a 5-stage pipelined MIPS32 microAptiv core with a separate peripheral bus running at 60 MHz, enabling simultaneous ADC sampling and CAN transactions. The integrated FPU accelerates field-oriented control (FOC) loops for three-phase PMSM and BLDC motors. Hardware CRC, ECC on Flash, and a real-time clock supplement the deterministic design. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), industrial control PLCs, multi-channel CAN nodes, IIoT edge gateways, and USB-CAN bridges. Designers select the PIC32MK1024MCF100 when deterministic CAN, large Flash, and DSP-class math are required in a single 100-pin device. When designing with this part, allocate sufficient decoupling on VDD/VBAT lines and review the pinout for SQI/USB coexistence constraints. Pin 1 orientation and JTAG/trace pin remapping must be verified against the 100-TQFP land pattern before PCB layout commit. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK1024MCM064-E/MR

PIC32MK1024MCM064-E/MR - 120MHz MCU, 1MB Flash, 64-QFN | Microchip

The Microchip PIC32MK1024MCM064-E/MR is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller with single-precision and double-precision hardware floating point unit (FPU), DSP extensions, and four 64-bit accumulators. Operating at up to 120MHz with 1MB of ECC-protected Flash and 256KB of SRAM in a 64-pin 9x9mm QFN package, the device targets motor control, industrial control, and Industrial IoT (IIoT) applications. Core headline specs: 120MHz CPU clock, 1MB Flash (with ECC), and 64-QFN 9x9mm package. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as ADCs, timers, communication interfaces, and PWM modules. The PIC32MK family extends this base by adding a hardware FPU, DSP MAC engine, and motor-control-oriented peripherals. Within the broader taxonomy: PIC32MK -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The MIPS32 microAptiv core with MicroMIPS compressed mode delivers roughly 40% smaller code versus standard MIPS, enabling 1MB Flash to host substantial firmware images. Key differentiating features include: a dedicated 12-bit, 3.75 Msps ADC with up to 48 channels (ideal for multi-phase motor current sensing), a high-resolution 16-channel PWM generator with 7.5ns resolution, four CAN-FD modules for industrial networking, one USB 2.0 Full-Speed OTG port, and a 32-channel DMA controller for offloading CPU data movement. ECC on Flash and parity on SRAM improve functional safety for IEC 60730-class designs. Architecturally the device pairs a Harvard-style bus with tightly-coupled SRAM, dual I/O ports running at 60MHz (CPU/2), and a Peripheral Pin Select (PPS) system that allows flexible remapping of digital peripherals to physical pins. MicroMIPS code compression coexists with standard MIPS32 instructions, and a single-cycle hardware MAC supports saturating and fractional arithmetic favored by DSP and field-oriented-control (FOC) loops. Typical application fits include: 3-phase BLDC/PMSM motor drives (FOC), industrial PLCs and servo controllers, multi-channel data acquisition front-ends, CAN-FD node controllers in industrial automation, and IIoT edge nodes bridging sensors to USB or CAN backbones. Industrial-grade -40C to +125C junction ratings suit outdoor enclosures and motor bays. Design consideration: route the analog AVSS/AVDD pair with a clean star ground and keep ADC traces short, because the on-chip 12-bit ADC achieves best performance when its 1.0V internal bandgap reference is bypassed with low-ESR ceramic capacitors. The 64-QFN exposed pad must be soldered to a continuous ground plane for thermal dissipation; derate full 120MHz operation above 105C ambient with at least 1 sq.in. of top-side copper. This page synthesizes distributor pricing, drop-in 64-QFN alternatives (including PIC32MK1024MCF064-E/MR, PIC32MK1024GPK064-E/MR, and the I-temp -I/MR variant), and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC32MK1024MCM064-I/MR

PIC32MK1024MCM064-I/MR - 120MHz 32-bit MCU with FPU | Microchip

The Microchip PIC32MK1024MCM064-I/MR is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core running at 120 MHz, integrating 1 MB of ECC-protected Flash and 256 KB of SRAM in a 64-pin QFN (9x9 mm) industrial-grade package. The device features a hardware Floating Point Unit (FPU) for single- and double-precision math, four 64-bit accumulators, single-cycle MAC supporting saturating and fractional operations, and MicroMIPS mode for 40% smaller code size. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory, and programmable peripherals on a single die, serving as the active computing element in an embedded system. Within the broader taxonomy, the PIC32MK belongs to 32-bit microcontrollers, which sit between 8/16-bit MCUs (cost-optimized simple control) and microprocessors / SoCs (high-performance application processing). The 32-bit tier is the workhorse for motor control, industrial automation, and connected IIoT edge nodes where deterministic real-time response and rich analog peripherals are required. Key features include up to 1 MB ECC Flash for safety-critical firmware integrity, 256 KB SRAM with 4 KB ECC, four operational amplifiers, four 12-bit ADCs with up to 42 analog inputs, six DAC outputs, USB Full-Speed with on-chip PHY, two CAN-FD modules, four I2C, six UART, and four SPI/I2S peripherals. The integrated motor-control PWM with high-resolution duty cycle and the high-precision analog make this device particularly suited to advanced Field-Oriented Control (FOC) loops. The microAptiv pipeline issues one instruction per cycle for integer and FPU operations, while the dual-issue MicroMIPS ISA halves code density without performance loss. ECC on both Flash and SRAM, along with the dedicated ECC-aware bus, satisfies the IEC 61508 SIL2 / ISO 26262 ASIL-B integrity expectations required in many industrial-safety subsystems. Typical applications include industrial motor control (BLDC/PMSM FOC drives, servo amplifiers), renewable-energy power conversion (solar string inverters, micro wind controllers), industrial PLC I/O modules, IIoT edge gateways with CAN-FD backbone, USB-CAN bridges, and digital-power SMPS controllers. The CAN-FD and USB-FS combination is a strong fit for connected industrial nodes that must log telemetry locally and forward it to a host PLC or cloud gateway. When designing with this device, prioritize PCB routing of the analog and PWM traces: keep ADC traces short, decouple AVDD/AVSS+ pins with 100 nF plus 10 uF bulk capacitors placed within 5 mm, and use a four-layer stack-up with a solid ground plane under the QFN-64 exposed pad. The exposed thermal pad must be soldered to a continuous copper island with stitched thermal vias to meet the datasheet thermal resistance (theta-JA) for full-load motor PWM operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical layout guidance that complement rather than duplicate the manufacturer datasheet, giving engineers a single reference for component selection, sourcing, and PCB bring-up.

Cotización Contacto

PIC32MK1024MCM064-I/PT

PIC32MK1024MCM064-I/PT - 120MHz, 1MB Flash MCU | Microchip

The Microchip PIC32MK1024MCM064-I/PT is a high-performance 32-bit microcontroller from the PIC32MK family, featuring a MIPS32 microAptiv core running at 120 MHz, 1 MB of ECC-protected Flash, and 256 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It integrates a single-precision Floating Point Unit (FPU), four 64-bit accumulators, a single-cycle MAC with saturating and fractional support, and MicroMIPS mode for up to 40% smaller code size. Peripherals include USB Full-Speed, CAN-FD, multiple 12-bit ADC modules, and motor-control PWMs optimized for field-oriented control. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash, RAM, and peripherals such as ADC, timers, and communication blocks, packaged in a single IC. Microcontrollers belong to the broader class of embedded processors and form the top of the embedded control hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC32MK family sits at the high-performance end of Microchip's 32-bit MCU lineup, designed for motor control, industrial control, and Industrial Internet of Things (IIoT) applications. Key features of the PIC32MK1024MCM064-I/PT include 1 MB ECC-protected Flash for safety-critical firmware, 256 KB SRAM with 4 KB backup RAM, an integrated DSP engine with FPU, multiple high-speed 12-bit ADC modules suitable for motor-current sampling, and communication peripherals including USB FS, CAN-FD, UART, SPI, and I2C. The device supports 2.3V to 3.6V single-supply operation and an industrial -40C to +85C temperature range. Architecturally, the PIC32MK uses a 5-stage pipeline microAptiv core with hardware multiply/divide, dual-issue DSP extensions, and tightly-coupled peripherals that deliver deterministic interrupt latency. The FPU handles single and double-precision IEEE-754 math natively, freeing the core for control loops, while the ECC Flash and parity-protected SRAM simplify functional-safety certification paths for IEC 60730 and similar standards. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), solar inverters, PLCs, factory automation controllers, multi-channel data loggers, and IIoT edge nodes. The combination of FPU, DSP MAC, and motor-control PWMs makes this MCU particularly well-suited to sensorless FOC firmware libraries distributed by Microchip. When designing with this part, provide a low-impedance 3.3V rail with bulk and 100 nF decoupling near each VDD pin pair, and reserve an unconnected trace from the MCLR pin to a debugger. Plan ADC sampling timing around the 12-bit SAR conversion rate and add an external watchdog if the application must survive firmware lock-ups. This page synthesizes distributor pricing, same-family drop-in variants, and motor-control design notes not collected in a single manufacturer document.

Cotización Contacto

PIC32MK1024MCM064T-E/MR

PIC32MK1024MCM064T-E/MR - 120MHz, 1MB MCU w/ CAN-FD, USB | Microchip

The Microchip Technology PIC32MK1024MCM064T-E/MR is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120 MHz, integrating 1 MB of ECC-protected Flash and 256 KB SRAM in a 64-pin QFN (9x9 mm) package with exposed thermal pad, supplied on tape-and-reel in the -E variant. Its headline parameters are 120 MHz CPU clock, 1 MB ECC Flash, USB Full-Speed device/host, and dual CAN-FD controllers, packaged in a 64-QFN with industrial-grade peripherals. A 32-bit microcontroller (MCU) is a programmable system-on-chip integrating a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of analog and digital peripherals on a single die. The PIC32MK family uses the MIPS32 microAptiv core, which fits into the broader taxonomy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MK series. These MCUs sit between simple 8/16-bit controllers and high-end application processors, optimized for deterministic real-time control with DSP extensions and motor-control-oriented peripherals. Key differentiating features include a 120 MHz operating frequency with DSP instructions, hardware multiply/divide and MAC unit, dual 12-bit ADC modules supporting up to 42 analog inputs at 3.75 MSPS, four 16-bit Compare/PWM outputs optimized for motor-drive switching, dual CAN-FD controllers for industrial networking, USB Full-Speed OTG, and 1 MB ECC Flash plus 256 KB SRAM. The 64-QFN (9x9 mm) package exposes a thermal pad enabling dissipation of roughly 1.5 W without external heatsinking for typical motor-control duty cycles. Architecturally, the device pairs a microAptiv core with Microchip's peripheral set including dedicated PWM, quadrature encoder interface, and high-resolution 12-bit ADC capable of simultaneous sampling for field-oriented control. The 1 MB ECC Flash enhances reliability for industrial and automotive-style applications by detecting and correcting single-bit errors during runtime, reducing field-return risk. Typical applications include BLDC and PMSM motor drives (field-oriented control), industrial PLC modules, multi-channel data acquisition front-ends, IIoT edge nodes with CAN-FD connectivity, and consumer appliance motor control. The wide peripheral mix supports both power conversion and real-time communication on a single chip, reducing BOM and PCB area. Designers should allocate 100 nF + 4.7 uF decoupling near the VDDCORE and VDDIO pins, route the analog AVSS/AVDD pair with a low-impedance ground plane, and follow Microchip AN2685 for QFN PCB land pattern and thermal via design. The E temperature grade (-40C to +125C) requires derating of junction temperature under sustained high-core-activity workloads. This page synthesizes distributor pricing, drop-in PIC32MK family alternatives, motor-control design notes, and parametric cross-brand comparisons that complement, but do not replace, the manufacturer datasheet.

Cotización Contacto

PIC32MK1024MCM064T-E/PT

PIC32MK1024MCM064T-E/PT - 32-bit MCU, 120MHz, 1MB Flash | Microchip

The Microchip Technology PIC32MK1024MCM064T-E/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, delivering 120 MHz of CPU performance with single-precision and double-precision FPU and DSP extensions, housed in a 64-pin TQFP (10x10 mm) package. The part integrates 1 MB of ECC-protected Flash memory, 256 KB SRAM, and 4 KB EEPROM, with 49 user I/O lines suitable for industrial motor control and IIoT endpoints. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/SRAM), and programmable peripherals. The 32-bit MCU category sits above 8-bit and 16-bit microcontrollers in computational capability and is typically used in DSP, motor control, and connected industrial applications where MIPS-per-dollar matters. The PIC32MK family specifically targets real-time control with high-resolution PWM, fast ADCs, and CAN-FD connectivity. Key differentiating features include four 64-bit accumulators, single-cycle MAC supporting saturating and fractional math, dual-panel Flash with Live Update, 12-bit ADCs at up to 12 Msps, USB Full-Speed, and CAN-FD interfaces. The device operates from 2.3 V to 3.6 V, supports industrial temperature ranges, and offers automotive-grade E temperature variant qualification for harsh environments. Architecturally, the PIC32MK1024MCM064 combines a microAptiv MCU core with a hardware Floating Point Unit supporting both single and double precision math. The MicroMIPS mode provides up to 40% smaller code size, while dedicated DSP instructions and a single-cycle MAC accelerate control-loop math used in field-oriented motor control (FOC) algorithms. Typical applications include industrial motor drives (PMSM, BLDC, ACIM), solar inverters, multi-channel data acquisition systems, factory automation controllers, and IIoT edge nodes. The combination of CAN-FD, USB, and high-resolution PWM makes it particularly well-suited for sensorless and encoder-based motor control. When designing with this part, ensure that the Live Update firmware pattern is fully understood in design and evaluation phases; jumping between Flash panels mid-operation requires careful ISR and vector table management. Decoupling capacitor placement and trace impedance for the external crystal must follow the family hardware checklist for low-impedance high-speed signaling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including cross-brand comparisons and site-internal pin-compatible alternatives drawn from XAIPART's part catalog.

Cotización Contacto

PIC32MK1024MCM064T-I/PT

PIC32MK1024MCM064T-I/PT - 120MHz, 1MB MCU Motor Control | Microchip

The Microchip Technology PIC32MK1024MCM064T-I/PT is a 32-bit microcontroller based on the MIPS32 microAptiv core, running at up to 120 MHz with 1 MB of ECC-protected Flash and 256 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It targets motor control, industrial control, and IIoT applications with an integrated FPU, DSP extensions, four 64-bit accumulators, single-cycle MAC, and MicroMIPS compression. A microcontroller (MCU) is an integrated circuit containing a processor core, program memory (Flash), data memory (RAM), and programmable peripherals on a single die. The PIC32MK family occupies the high-performance 32-bit tier of the Microchip PIC portfolio, sitting above PIC24/dsPIC33 parts and below MPU-class devices, and is engineered for deterministic real-time control loops in industrial environments. The 1 MB dual-panel Flash with ECC supports live update and functional safety, while 256 KB RAM enables complex state machines and communication stacks. Key features include 12-bit ADC modules optimized for motor current sensing, dedicated PWM outputs with 2.3 ns resolution, USB Full-Speed, CAN-FD, four UART/SPI/I2C ports, a 12-bit DAC, and op-amps/ comparators for signal conditioning. The integrated FPU accelerates single/double-precision math; the DSP extensions support single-cycle MAC and saturating fractional math, achieving 240 MHz aggregate DSP throughput when paired with the floating-point unit. Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), industrial PLC modules, solar inverters, and IIoT sensor hubs. The 64-pin TQFP package provides ample I/O for multi-axis servo systems while remaining hand-solderable for prototypes. Design considerations: ensure decoupling follows the manufacturer reference layout; the dual-panel Flash allows live firmware update without CPU stall. Industrial-grade -40C to +85C operating range supports unenclosed factory deployment. This page synthesizes distributor pricing, drop-in TQFP-64 alternatives, and practical design notes from the Microchip datasheet that distributor listings do not surface in one place.

Cotización Contacto

PIC32MK1024MCM100-E/PT

PIC32MK1024MCM100-E/PT - 120MHz MCU, 1MB Flash, Motor Control | Microchip

The Microchip Technology PIC32MK1024MCM100-E/PT is a 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 120 MHz with an integrated single/double-precision floating-point unit (FPU) and DSP extensions, housed in a 100-pin TQFP package (12x12 mm). It integrates 1 MB of Flash with ECC protection, 256 KB of SRAM, and 4 KB of EEPROM, delivering the memory headroom required for protocol stacks, motor-control firmware, and floating-point signal-processing tasks. A 32-bit microcontroller (MCU) is a single-chip computing system integrating a CPU core, volatile memory (SRAM), non-volatile memory (Flash/EEPROM), and a rich set of peripherals (ADC, PWM, communication interfaces). The PIC32MK family sits at the high-performance tier of Microchip's PIC32 portfolio, bridging the gap between traditional 8/16-bit MCUs and higher-cost application processors. The MIPS32 microAptiv core executes instructions in a single cycle for most operations, supports MicroMIPS mode for up to 40% smaller code, and includes four 64-bit accumulators plus a single-cycle MAC for saturating and fractional arithmetic. Key features include four 12-bit ADC modules with up to 6 Msps combined sampling rate, dedicated Motor Control PWM (MCPWM) with 12 channels, two USB 2.0 Full-Speed ports, two CAN-FD controllers, six UART, four SPI, and four I2C interfaces. Operating voltage spans 2.3 V to 3.6 V across an industrial temperature range of -40 C to +125 C. The dual-panel Flash architecture supports Live Update, allowing firmware upgrades without service interruption. Typical applications span industrial motor drives (BLDC, PMSM, AC induction), factory automation PLCs, IIoT edge nodes, power-conversion control loops, and multi-axis robotic control. The integrated FPU and DSP MAC eliminate external math accelerators, simplifying PCB layout and reducing BOM cost for control algorithms that require trigonometric or matrix operations in real time. When designing with this device, reserve at least 25% Flash for OTA updates if Live Update is planned, and ensure the 12-bit ADC reference voltage decoupling follows the manufacturer reference schematic to avoid gain error in motor current sensing. The 100-pin TQFP footprint is shared across the PIC32MK MCM/GPK/MCF family, simplifying PCB reuse across variants. This page synthesizes distributor pricing from DigiKey, Mouser and LCSC, drop-in compatible PIC32MK family alternatives, and practical design notes (ECC Flash, dual-panel Live Update, MCPWM center-aligned modes) not found condensed in the manufacturer datasheet.

Cotización Contacto

PIC32MK1024MCM100-I/PT

PIC32MK1024MCM100-I/PT - 120MHz MCU, 1MB Flash, Motor Control | Microchip

The Microchip Technology PIC32MK1024MCM100-I/PT is a 32-bit MIPS32 microAptiv microcontroller operating at 120 MHz, integrating 1 MB of ECC-protected Flash and 256 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets high-performance motor control, industrial automation, and Industrial Internet of Things (IIoT) edge nodes with a rich analog and connectivity peripheral set including dedicated motor-control PWMs, multiple 12-bit ADCs, USB Full-Speed, and CAN-FD. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a broad set of peripherals including timers, communication interfaces, and analog blocks. Within the semiconductor hierarchy, a microcontroller sits below microprocessors in raw compute power but above simple digital logic in integration density. The PIC32MK family extends the PIC32 architecture by adding a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS compressed instruction mode (up to 40% smaller code), four 64-bit accumulators, and a single-cycle hardware MAC supporting saturating and fractional math — features that target DSP-grade signal processing typically required in field-oriented control (FOC) loops. Key features include a 120 MHz core with DSP extensions, hardware ECC on Flash, dual-panel Flash supporting Live Update firmware upgrades, multiple 12-bit ADC modules suitable for current sensing in motor drives, dedicated motor-control PWM peripherals, USB Full-Speed, CAN-FD, and a rich mix of UART/SPI/I2C interfaces. Operating voltage spans 2.3 V to 3.6 V (commonly 2.5 V/3.3 V rails) and the industrial temperature range is -40 °C to +85 °C. Architecturally, the device pairs a Harvard-style bus with tightly-coupled SRAM, enabling deterministic interrupt latency critical for tight current-control loops. The dual-panel Flash allows simultaneous read-while-write, enabling Live Update field firmware replacement without downtime — an important reliability feature for industrial and IIoT systems that cannot be taken offline. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, industrial PLCs, multi-channel data acquisition, predictive maintenance sensor hubs, and IIoT edge nodes requiring on-chip DSP, FPU and CAN-FD communication. When designing with this MCU, allocate sufficient PCB area for the 12x12 mm TQFP footprint and ensure decoupling is placed close to all VDD/VSS pairs. Choose the -I/PT industrial variant for commercial/industrial use, or step up to the -E/PT extended-temperature variant for harsh environments. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MK and PIC32CM families, and practical design notes not aggregated on the manufacturer datasheet front page.

Cotización Contacto

PIC32MK1024MCM100T-E/PT

PIC32MK1024MCM100T-E/PT - 120MHz 1MB MCU w/ FPU & CAN-FD | Microchip

The Microchip PIC32MK1024MCM100T-E/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core running at 120MHz, integrating 1MB of ECC-protected Flash and 256KB SRAM in a 100-pin TQFP package rated for the -40C to +125C automotive/extended temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, communication interfaces, timers, and GPIO. Within the broader taxonomy, the PIC32MK belongs to the 32-bit MCU family (32-bit microcontroller -> microcontroller -> embedded processor -> semiconductor). The MIPS32 microAptiv core used here is a Harvard-architecture RISC core with DSP extensions and a hardware Floating Point Unit (FPU) supporting single- and double-precision IEEE 754 math, as well as MicroMIPS compressed mode for up to 40% smaller code footprint. Key differentiating specifications include four 64-bit accumulators and a single-cycle MAC that supports saturating and fractional math, a 12-bit ADC with up to 42 analog input channels and dual Sample-and-Hold, four on-chip op-amps intended for motor current sensing, plus dedicated Motor Control PWM modules with high-resolution edge placement. Communication peripherals include USB Full-Speed, CAN-FD, and multiple UART/SPI/I2C instances. The 100-TQFP (12x12mm) package exposes the full peripheral set and is pin-compatible with other PIC32MK100-pin family members. Typical applications span motor control (BLDC, PMSM, ACIM, and stepper drives), industrial control, industrial IoT (IIoT), multi-channel data acquisition systems, and automotive body/comfort modules. The integrated op-amps, HRPWM, and 12-bit ADC deliver a tightly coupled analog front end that removes the need for external signal conditioning in field-oriented control (FOC) loops. When designing with this part, reserve careful attention to PCB thermal management (theta_JA of the TQFP-100 is package-dependent and limits sustained dissipation) and to ECC initialization of Flash on first programming. The on-chip op-amps have a fixed gain-bandwidth trade-off; for high-bandwidth current sensing an external amplifier may still be preferred. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK1024MCM100T-I/PT

PIC32MK1024MCM100T-I/PT - 120MHz 32-bit MCU 1MB Flash | Microchip

The Microchip PIC32MK1024MCM100T-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core with a single-precision Floating Point Unit (FPU), running at 120 MHz, and integrating 1 MB of ECC-protected Flash plus 256 KB of RAM in a 100-pin TQFP (12x12 mm) package. The device targets motor control, digital power conversion, and industrial IIoT applications with its rich peripheral set including dedicated PWM, multiple 12-bit ADC modules, USB Full-Speed, and CAN-FD. A 32-bit microcontroller is a microprocessor integrated with program memory (Flash), data memory (RAM), and peripherals on a single die. The PIC32MK family sits in the hierarchy as: microcontroller -> 32-bit MCU -> MIPS32 microAptiv MCU -> PIC32MK sub-family -> Motor Control / General Purpose family. The microAptiv core executes both MIPS32 and MicroMIPS (compressed) instructions, the latter providing up to 40% smaller code size for cost-sensitive applications. Key features include four 64-bit accumulators with single-cycle MAC for saturating and fractional DSP math, dual-panel Flash supporting live update, hardware ECC on Flash and RAM, and four on-chip op amps. The 12-bit ADC modules run up to 3.75 Msps with up to 49 analog input channels, while the high-speed PWM delivers 2.5 ns resolution for digital power and motor control loops. Technical depth: the device supports 2.3 V to 3.6 V single-supply operation with on-chip voltage regulation, includes a 4 KB instruction cache, and integrates a cryptographic engine supporting AES, DES, and SHA. The CAN-FD controller complies with ISO 11898-1:2015 and the USB module supports full-speed (12 Mbps) host and device operation with integrated PHY. Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), solar inverters and MPPT power stages, industrial PLCs, IIoT edge nodes, and digital audio processing. The wide operating temperature range of -40C to +85C supports industrial and consumer deployments. When designing with this device, allocate sufficient PCB area for the 100-pin TQFP land pattern and provide local 0.1 uF + bulk decoupling near each power pin to handle the high-speed PWM switching transients.

Cotización Contacto

PIC32MM0016GPL020-E/ML

PIC32MM0016GPL020-E/ML - 25MHz 32-bit MCU, 16KB Flash, 20-QFN | Microchip

The Microchip Technology PIC32MM0016GPL020-E/ML is a 32-bit MIPS32 microAptiv UC core microcontroller running up to 25 MHz, integrating 16 KB of Flash and 4 KB of SRAM in a 20-pin QFN (4x4 mm) package. The PIC32MM GPL family is engineered for cost-sensitive, ultra-low-power embedded designs, offering CoreMark performance of 79 at 25 MHz and Sleep currents down to 500 nA to extend battery life in space-constrained end products. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a set of peripherals such as ADCs, timers, communication interfaces, and GPIO into one package. Within the broader semiconductor taxonomy, an MCU is a sub-class of microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC32MM GPL family sits at the low-power and low-cost end of Microchip's 32-bit PIC32 portfolio, between 8-bit PIC16/PIC18 devices and higher-performance PIC32MX/PIC32MK families. Key features of the PIC32MM0016GPL020-E/ML include 16 KB Flash and 4 KB SRAM, a 12-bit ADC with up to 10 channels, 3 op-amps, 5-bit DAC, comparators, and 79 CoreMark at 25 MHz. The device supports microMIPS compressed instruction mode for improved code density and runs from 2.0V to 3.6V. It is available in a compact 20-pin QFN (4x4 mm) with an exposed pad (EP) for thermal dissipation. The -E suffix indicates an extended (-40C to +125C) operating temperature range. The PIC32MM0016GPL020 uses the MIPS32 microAptiv UC core, which balances 32-bit performance with strong code density through microMIPS. Integrated peripherals - 12-bit ADC, comparators, op-amps and DAC - reduce external component count. XLP (eXtreme Low Power) techniques include multiple low-power modes that bring quiescent current down to 500 nA in Deep Sleep, making it well suited to energy-harvesting and battery-powered nodes. Typical applications include IoT sensor nodes, low-power wireless HMI, battery-powered medical wearables, home automation controllers, and consumer electronics such as remote controls and small appliances. Its tiny 4x4 mm footprint also suits dense PCB layouts in wearables and space-constrained industrial sensors. When designing with this part, place decoupling capacitors (100 nF + 1 uF) close to VDD/AVDD pins, and connect the exposed pad (EP) to a continuous ground copper pour for both thermal and electrical performance. Verify that unused pins are configured as outputs or pulled to a defined level to minimize Sleep current. This page synthesizes distributor pricing, parametric drop-in alternatives within the same 20-QFN footprint, and practical design notes drawn from the Microchip PIC32MM family datasheet - information not consolidated on individual distributor product pages.

Cotización Contacto

PIC32MM0016GPL020-E/SS

PIC32MM0016GPL020-E/SS - 32-bit MCU, 16KB Flash, 25MHz | Microchip

The Microchip PIC32MM0016GPL020-E/SS is a 32-bit MIPS32 microAptiv UC core microcontroller operating up to 25 MHz, integrating 16 KB Flash and 4 KB SRAM in a 20-pin SSOP package. The device belongs to the PIC32MM GPL family, Microchip's lowest-power and most cost-effective 32-bit PIC32 microcontroller line, targeting space-constrained and battery-powered applications. What is a PIC32MM microcontroller? PIC32MM belongs to the 32-bit microcontroller (MCU) category within the broader hierarchy of microcontrollers -> microprocessors -> ICs -> semiconductors. The PIC32MM GPL specifically is the eXtreme Low Power (XLP) sub-family that adds sub-microamp deep-sleep modes down to 500 nA, designed to extend battery life in always-on IoT endpoints. It uses the MIPS32 microAptiv Unified Core (UC) which supports the microMIPS compressed instruction set, delivering 79 CoreMark at 25 MHz while maintaining code density comparable to 16-bit cores. Key features of the PIC32MM0016GPL020-E/SS include 16 KB (16K x 8) Flash program storage, 4 KB SRAM, an integrated 79 CoreMark/25 MHz performance, and ultra-low-power modes with sleep currents as low as 500 nA. The 20-pin SSOP package provides a compact footprint suitable for hand-held and wearable designs, and the -E temperature grade extends operating range from -40C to +125C for industrial environments. Technical depth: the device is built around the MIPS32 microAptiv UC pipeline with hardware multiply/divide and a microMIPS ISA extension that effectively doubles code density compared with standard MIPS32. On-chip peripherals include multiple 16-bit timers, a 10-bit 200 ksps ADC, comparators, UART/SPI/I2C, and a configurable logic cell. The 2.3V-3.6V single-supply operation simplifies power tree design, while the XLP regulator enables deep-sleep retention with sub-microamp draw. Typical applications: low-power IoT sensor nodes, battery-powered wireless remote controls, wearable health monitors, industrial HMI button/keypad controllers, and small home appliances where 32-bit performance, ultra-low sleep current, and minimal PCB area are critical. Design consideration: leverage the XLP sleep modes aggressively in polling applications - a 500 nA sleep current lets a CR2032 coin cell run for years rather than months. For deterministic response, use the deep-sleep wake source from the RTCC or an external interrupt rather than the WDT. This page synthesizes distributor pricing, drop-in same-package alternatives, application recommendations, and design notes beyond the manufacturer datasheet, giving engineers a single resource for part selection, sourcing, and PCB-level design guidance.

Cotización Contacto

PIC32MM0016GPL020-I/ML

PIC32MM0016GPL020-I/ML - 16KB Flash 32-bit MCU 20-QFN | Microchip

The Microchip Technology PIC32MM0016GPL020-I/ML is a low-cost 32-bit MIPS32 microAptiv UC microcontroller with 16KB Flash, 4KB SRAM, and a maximum CPU speed of 25 MHz, housed in a 20-pin 4x4 mm QFN (ML) package with eXtreme Low Power (XLP) sleep modes down to 500 nA. A 32-bit microcontroller (MCU) is an integrated system-on-chip that combines a high-performance processor core, Flash program memory, SRAM, and a rich set of analog and digital peripherals in a single package. The PIC32MM family extends Microchip's PIC architecture into 32-bit territory using the MIPS microAptiv core, while maintaining software compatibility with the company's MPLAB X IDE and Harmony ecosystem. 32-bit MCUs typically replace older 8/16-bit parts when designs need more computational headroom, larger address spaces, and richer peripherals for connected or signal-processing applications. Key features of this PIC32MM0016GPL020-I/ML include 16KB (16K x 8) Flash program memory, 4KB SRAM, an integrated 12-bit ADC, multiple UART/SPI/I2C peripherals, and a wide operating voltage range suited for both battery-powered and industrial systems. The device also integrates Microchip's nanoWatt XLP technology for sub-microamp sleep currents, enabling multi-year coin-cell or lithium battery operation in always-on applications. Technically, the part uses the MIPS32 microAptiv UC core with a 5-stage pipeline and supports a 25 MHz/25 MIPS core clock from an internal 8 MHz oscillator with PLL. The 20-QFN (4x4 mm) package provides 14 general-purpose I/O pins, 9 channels of 10-bit ADC, and 3 comparators, while keeping board area to roughly 16 mm squared. Typical applications include low-power IoT sensor nodes, wearable fitness/health monitors, remote controls, battery-powered HVAC sensors, USB dongles, and space-constrained consumer devices such as toys and personal electronics where 8-bit performance would be limiting. When designing with this device, allocate pin 1 (MCLR) for proper reset, ensure the VCAP pin has a 1uF decoupling capacitor, and follow Microchip's datasheet layout guidelines for the 4x4 mm QFN thermal pad to keep the die within safe junction temperatures. This page synthesizes distributor pricing, drop-in PIC32MM family alternatives, application design notes, and a side-by-side parametric comparison - information not bundled together on the manufacturer datasheet.

Cotización Contacto

PIC32MM0016GPL020-I/SS

PIC32MM0016GPL020-I/SS - 32-bit 25MHz 16KB MCU | Microchip

The Microchip PIC32MM0016GPL020-I/SS is a low-power 32-bit PIC microcontroller featuring a MIPS32 microAptiv UC core running up to 25 MHz, integrating 16 KB of Flash and 4 KB of SRAM in a 20-pin SSOP package. It belongs to the PIC32MM GPL family, Microchip's lowest-power and most cost-effective 32-bit MCU line, designed for battery-powered and space-constrained applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die, forming the core of any embedded system. Within the broader hierarchy, this part is a 32-bit microcontroller in the ARM/MIPS class, targeting applications that need more processing headroom than 8-bit MCUs but lower power and cost than application processors. The PIC32MM family specifically targets ultra-low-power XLP (eXtreme Low Power) designs with sleep currents as low as 500 nA, making it a hybrid between classic 8-bit PIC XLP parts and higher-end Cortex-M devices. Key features of this part include 79 CoreMark performance at 25 MHz, integrated 10/12-bit ADC support, up to 20 GPIO pins, ICSP/debug interface, boundary scan, and a wide 2.5V/3.3V operating voltage range with low-power sleep modes. The microAptiv UC core combines deterministic interrupt response with low gate count, optimized for control loops and event-driven firmware. The 20-pin SSOP (5.30 mm body) suits hand-held and industrial sensor modules. Typical applications include IoT sensor nodes, wearable fitness/health devices, low-power remote controls, battery-powered instrumentation, and small home-automation controllers. Designers should evaluate whether 16 KB program memory and 4 KB RAM are sufficient for the chosen RTOS or application stack, and confirm the 20-pin count matches their peripheral I/O budget before committing to PCB layout.

Cotización Contacto

PIC32MM0016GPL020T-I/SS

PIC32MM0016GPL020T-I/SS - 32-bit 25MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC32MM0016GPL020T-I/SS is a 32-bit MIPS32 microAptiv UC core microcontroller from the PIC32MM GPL family, delivering 25 MHz CPU performance with 16 KB Flash and 4 KB SRAM in a 20-pin SSOP package. The device is engineered for cost-sensitive, space-constrained embedded designs where extreme low power (XLP) and longer battery life are mandatory. Tape and reel packaging (-T suffix) and the industrial -40C to +85C temperature range make it suitable for high-volume manufacturing. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash for program storage, SRAM for runtime data), and programmable peripherals. The PIC32MM family sits within the 32-bit MCU category, which itself belongs to the broader embedded processor and power management IC hierarchy. 32-bit cores such as MIPS32 microAptiv enable richer instruction sets, deterministic interrupt handling, and higher code density than 8/16-bit alternatives while preserving ultra-low-power sleep behavior. Key features include 16 KB Flash program memory, 4 KB SRAM, eXtreme Low Power (XLP) sleep currents down to 500 nA, multiple low-power sleep modes, integrated peripherals such as timers, comparators, ADC, and configurable I/O. The 25 MHz core provides responsive control loop execution, while the 20-pin SSOP (5.30 mm body) keeps the footprint compact for sensor nodes, wearable accessories, and consumer electronics. Architecturally, the PIC32MM0016GPL020T-I/SS uses the MIPS32 microAptiv UC core, which combines a deterministic interrupt structure with low-power modes designed for battery-powered applications. The device supports Microchip's MPLAB X IDE and XC32 toolchain, giving engineers a mature firmware ecosystem including software libraries, code configurators (MCC), and debugging via 2-wire ICSP. Typical applications include IoT sensor nodes, battery-powered wearables, low-power remote controls, portable medical accessories, and consumer HMI sub-modules. The combination of low sleep current, modest Flash/RAM footprint, and compact SSOP package is ideal where board area, BOM, and standby battery life dominate design trade-offs. When designing with this part, balance active processing performance against sleep duty cycle: at 25 MHz the core delivers responsive control, but effective battery life is governed by the 500 nA sleep current and the application's wake frequency. Use the configuration bits to lock JTAGEN=OFF after programming. This page consolidates Microchip datasheet parameters, distributor pricing tiers, drop-in compatible variants, and design guidance in one place, complementing the manufacturer datasheet with synthesized cross-vendor alternatives and application-specific notes.

Cotización Contacto

PIC32MM0016GPL028-E/ML

PIC32MM0016GPL028-E/ML - 25MHz 32-bit MCU 16KB Flash QFN-28 | Microchip

The Microchip Technology PIC32MM0016GPL028-E/ML is a 32-bit MIPS32 microAptiv UC core microcontroller running at 25 MHz with 16 KB Flash and 4 KB RAM in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It belongs to the PIC32MM GPL family, Microchip's lowest-power and most cost-effective 32-bit MCU line, offering sleep currents as low as 500 nA and packages as small as 4x4 mm for space-constrained battery-powered designs. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals (ADC, timers, communication interfaces). The PIC32MM sits in the hierarchy: 32-bit MCU -> Cortex-M/MIPS-class MCU -> microcontroller -> embedded IC -> semiconductor. The microAptiv UC core implements the MIPS32 release-2 instruction set with microMIPS code compression, achieving 79 CoreMark at 25 MHz while keeping active current in the low microamp-per-MHz range. Key features include 16 KB Flash, 4 KB RAM, 22 GPIO, two UART, two SPI/I2S, two I2C, eight PWM outputs, two comparators with a 5-bit DAC, a 12-bit ADC with up to 12 channels (10-bit option), and a 3.3V supply domain operating from 2.0V to 3.6V. The eXtreme Low Power (XLP) modes support sleep, deep sleep, and retention states, making the device ideal for battery-powered IoT endpoints. The 28-pin QFN (6x6) package offers an exposed thermal pad for improved dissipation in continuous-active use. The architecture combines a Harvard-style bus with peripheral DMA and a 32-bit core, allowing deterministic interrupt response and high code density via microMIPS. Integrated peripherals are mapped through the Microchip Harmony and MPLAB X ecosystems, with hardware touch, mTouch capacitive sensing, and peripheral trigger generators reducing external component count. Typical applications include wearable health and fitness sensors, low-power wireless sensor nodes (sub-GHz or BLE co-processor hosts), battery-powered industrial sensors, remote controls, and consumer HMI panels. The XLP modes and small QFN footprint also suit always-on IoT edge devices. Designers should note that -E/ML is the extended-temperature (-40C to +125C) 28-QFN variant; identical-pin -I/SS and -E/SS variants come in 28-SSOP, and the smaller -20 QFN/SSOP variants in the same family reduce board area when 22 GPIO are not required.

Cotización Contacto

PIC32MM0016GPL028-E/SS

PIC32MM0016GPL028-E/SS - 16KB Flash 32-bit MCU, 25MHz XLP | Microchip

The Microchip PIC32MM0016GPL028-E/SS is a 32-bit MIPS32 microAptiv PIC microcontroller running at 25 MHz with 16 KB of Flash and 4 KB of SRAM, housed in a 28-pin SSOP package. It operates from 2.0 V to 3.6 V and is positioned as Microchip's lowest-power and most cost-effective 32-bit PIC32 family member. The part combines the deterministic interrupt behaviour of a MIPS core with aggressive eXtreme Low Power (XLP) modes that drop consumption into the sub-microamp range, making it a 32-bit upgrade path for designs that previously used 8-bit or 16-bit MCUs. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit CPU core, Flash program memory, SRAM data memory, and a configurable set of on-chip peripherals such as timers, communication controllers, ADC/DAC, and GPIO. Within the broader taxonomy it sits between 16-bit MCUs (PIC24, dsPIC) and 32-bit application processors (Cortex-A class), in the category of low-power 32-bit microcontrollers aimed at battery-powered and space-constrained embedded systems. Key features include 79 CoreMark at 25 MHz, two UART, two SPI/I2S, eight PWM channels, two comparators, a 5-bit DAC, and a 12-bit ADC with up to 12 channels (10-bit ADC option). The part also exposes the microMIPS ISA, allowing compact code density while retaining 32-bit performance, and supports peripheral pin select for flexible signal routing. Sleep currents down to 500 nA and multiple low-power modes (Idle, Sleep, Deep Sleep) help extend battery life in IoT, sensor, and metering designs. The architecture is built on the MIPS32 microAptiv core with single-cycle hardware multiply and a deterministic interrupt controller. Integrated peripherals are mapped through a PPS (Peripheral Pin Select) layer, which allows remapping of digital functions onto a wide range of I/O pins without redesigning the silicon. This makes pin-compatible migration straightforward across the PIC32MM GPL family. Typical applications include IoT sensor nodes, wearable health and fitness devices, low-power wireless remotes, consumer appliances, HMI controls with segmented displays, and battery-powered industrial sensors. The combination of microMIPS code density, XLP sleep modes, and integrated 12-bit ADC makes it particularly well-suited to designs that previously combined a small MCU with a separate ADC or op-amp. A key design consideration is to budget current draw in the worst-case active and sleep modes, because the headline 25 MHz / 79 CoreMark headline figure masks the much lower energy-per-task enabled by XLP sleep. Place a 0.1 µF decoupling capacitor close to each VDD pin and follow the recommended PCB layout for the exposed pad packages when migrating to UQFN variants. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet, with same-package SSOP pin-compatibles sourced from verified cross-reference data.

Cotización Contacto

PIC32MM0016GPL028-I/M6

PIC32MM0016GPL028-I/M6 - 32-bit MCU, 16KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC32MM0016GPL028-I/M6 is a 32-bit RISC microcontroller based on the MIPS32 microAptiv UC core, delivering 25 MHz performance with 79 CoreMark, 16 KB of Flash and 4 KB of SRAM in a compact 28-pin UQFN (4x4 mm) package. It targets space-constrained and battery-powered embedded designs with eXtreme Low Power (XLP) sleep modes down to 500 nA, integrated 12-bit ADC, 5-bit DAC, comparators, and configurable logic cells. A 32-bit microcontroller is an MCU built around a CPU whose internal data path, registers, and arithmetic units are 32 bits wide. PIC32MM devices occupy Microchip's lowest-power, lowest-cost 32-bit tier (PIC32 -> 32-bit MCU -> microcontroller -> embedded computing -> semiconductor), making them a stepping stone between 8/16-bit PIC16/PIC24 parts and higher-end Cortex-M devices while remaining code-compatible with the broader PIC32 family. Key features include microMIPS instruction-set compression for higher code density, peripheral pin select for flexible routing, 4-channel DMA, RTCC with calendar, and Core Independent Peripherals (CIPs) such as CLC, MCCP and 16-bit PWM. The 12-bit 1 Msps ADC with internal bandgap reference and the 5-bit DAC enable sensor conditioning and audio-class analog outputs without external converters. Architecture-wise, the PIC32MM combines a Harvard-style MIPS core with tightly-coupled SRAM and Flash, deterministic interrupt latency, and a hardware math accelerator for 32-bit MAC operations. Sleep current as low as 500 nA (RAM retention) plus multiple low-power run/Idle modes make it suitable for energy harvesting and primary-cell IoT nodes. Typical applications include IoT sensor nodes, connected thermostats, environmental monitoring, portable medical/fitness devices, building automation, low-cost motor control, and consumer peripherals such as e-cigarettes, smart wearables and BLE beacons. The 4x4 mm UQFN is the smallest package option, ideal when PCB real estate is at a premium. When designing with this device, route analog signals away from switching nodes and provide a solid ground pour to keep ADC noise below 1 LSB. Use the MPLAB Code Configurator (MCC) to autogenerate peripheral setup code and shorten firmware development. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the standalone manufacturer datasheet.

Cotización Contacto

PIC32MM0016GPL028-I/SS

PIC32MM0016GPL028-I/SS - 32-bit 25MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC32MM0016GPL028-I/SS is a 32-bit RISC microcontroller built on the MIPS32 microAptiv UC core, operating at up to 25 MHz with 16 KB of Flash program memory and 4 KB of SRAM, housed in a 28-pin SSOP package. The device targets low-power, cost-sensitive embedded designs and offers deep sleep currents down to 500 nA, making it one of the lowest-power PIC32 devices in the portfolio. It integrates a 12-bit ADC, multiple communication peripherals, and eXtreme Low Power (XLP) technology for battery-powered applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and peripherals such as ADCs, timers, and communication interfaces. The PIC32MM family is a low-cost, low-pin-count branch of the broader PIC32 line, optimized for space-constrained and energy-constrained designs. Within Microchip's taxonomy, PIC32MM sits under PIC32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key specifications of the PIC32MM0016GPL028-I/SS include 16 KB (16K x 8) Flash, 4 KB SRAM, a maximum CPU clock of 25 MHz, and operating voltage of 2.0 V to 3.6 V. The -I suffix indicates an industrial temperature range of -40 C to +85 C. The 28-SSOP package provides a compact 5.30 mm footprint suitable for hand-held and IoT devices. Architecture-wise, the device uses a MIPS32 microAptiv UC core with single-cycle hardware multiply and a 4-stage pipeline, delivering 1.53 DMIPS/MHz. It includes a 12-bit ADC with up to 9 channels, 3 analog comparators, multiple timers, I2C, SPI, UART, and a 6-channel PWM. The peripheral pin select (PPS) feature allows flexible function-to-pin mapping. Typical applications include IoT sensor nodes, wearable fitness bands, consumer remote controls, battery-operated medical peripherals, low-cost industrial sensors, and smart home edge devices. The wide operating voltage and ultra-low sleep current make it ideal for Energy Harvesting or coin-cell powered designs. When designing with this MCU, ensure the supply voltage stays within 2.0 V to 3.6 V and that decoupling capacitors are placed close to VDD/AVDD pins. The device supports MPLAB X IDE and XC32 compiler, and JTAG/ICSP programming for development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page, giving engineers a single consolidated reference for sourcing and design.

Cotización Contacto

Subcategorías

Productos (32775)

PIC32MK1024MCF064-E/MR - 32-bit MCU, 1MB Flash, Motor Control 64-QFN | Microchip

PIC32MK1024MCF064-E/PT - 80MHz 32-bit MCU 1MB Flash 64-TQFP | Microchip

PIC32MK1024MCF064-I/MR - 120MHz 1MB Flash Motor Control MCU | Microchip

PIC32MK1024MCF064T-I/MR - 32-Bit MCU 120MHz 1MB Flash | Microchip

PIC32MK1024MCF100T-I/PT - 120MHz 32-bit MCU 1MB Flash 100-TQFP

PIC32MK1024MCM064-E/MR - 120MHz MCU, 1MB Flash, 64-QFN | Microchip

PIC32MK1024MCM064-I/MR - 120MHz 32-bit MCU with FPU | Microchip

PIC32MK1024MCM064-I/PT - 120MHz, 1MB Flash MCU | Microchip

PIC32MK1024MCM064T-E/MR - 120MHz, 1MB MCU w/ CAN-FD, USB | Microchip

PIC32MK1024MCM064T-E/PT - 32-bit MCU, 120MHz, 1MB Flash | Microchip

PIC32MK1024MCM064T-I/PT - 120MHz, 1MB MCU Motor Control | Microchip

PIC32MK1024MCM100-E/PT - 120MHz MCU, 1MB Flash, Motor Control | Microchip

PIC32MK1024MCM100-I/PT - 120MHz MCU, 1MB Flash, Motor Control | Microchip

PIC32MK1024MCM100T-E/PT - 120MHz 1MB MCU w/ FPU & CAN-FD | Microchip

PIC32MK1024MCM100T-I/PT - 120MHz 32-bit MCU 1MB Flash | Microchip

PIC32MM0016GPL020-E/ML - 25MHz 32-bit MCU, 16KB Flash, 20-QFN | Microchip

PIC32MM0016GPL020-E/SS - 32-bit MCU, 16KB Flash, 25MHz | Microchip

PIC32MM0016GPL020-I/ML - 16KB Flash 32-bit MCU 20-QFN | Microchip

PIC32MM0016GPL020-I/SS - 32-bit 25MHz 16KB MCU | Microchip

PIC32MM0016GPL020T-I/SS - 32-bit 25MHz 16KB Flash MCU | Microchip

PIC32MM0016GPL028-E/ML - 25MHz 32-bit MCU 16KB Flash QFN-28 | Microchip

PIC32MM0016GPL028-E/SS - 16KB Flash 32-bit MCU, 25MHz XLP | Microchip

PIC32MM0016GPL028-I/M6 - 32-bit MCU, 16KB Flash, 28-UQFN | Microchip

PIC32MM0016GPL028-I/SS - 32-bit 25MHz 16KB Flash MCU | Microchip