Circuitos integrados

T1042NSE7PQPB

T1042NSE7PQPB - QorIQ 4x e5500 1.4GHz MPU | NXP

The NXP Semiconductors T1042NSE7PQPB is a QorIQ T1 family communications processor that integrates four 64-bit e5500 Power Architecture cores running at 1400 MHz, with hardware cryptography, DDR3L/DDR4 memory controller, and Data Path Acceleration Architecture (DPAA). It is housed in a 780-ball FC-PBGA (23x23) package and targets industrial temperature ranges (0C to 105C). The device is designed for networked printers and embedded communications applications. A communications processor is a specialized system-on-chip that combines general-purpose CPU cores with hardware offload engines for packet processing, security, and high-speed I/O. Within the broader taxonomy, the T1042 sits at the top of the tree: communications processor -> microprocessor (MPU) -> integrated circuit -> semiconductor. The QorIQ T1 family is a scalable, pin-compatible platform that allows migration down to the dual-core T1022 and up to higher-performance devices such as the T2081, simplifying platform design across product tiers. Key specifications of the T1042NSE7PQPB include four e5500 cores at 1.4 GHz, 32 KB I-cache and 32 KB D-cache per core with 256 KB shared L2 per cluster, integrated SEC cryptography engine, DDR3L/DDR4 memory controller with ECC support, three PCI Express Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers with PHY, two Gigabit Ethernet controllers, and an integrated security engine for IPsec, SSL/TLS, and bulk encryption. The device supports hardware virtualization and implements the DPAA for hardware-assisted queue and buffer management. The architecture combines out-of-order Power Architecture execution with hardware-accelerated data path processing. The e5500 cores implement hardware virtualization through logical partition support and extended interrupt prioritization. The DPAA provides a standardized infrastructure for parallel packet processing, including frame managers, queue managers, and buffer managers that offload packet handling from the cores. Hardware security acceleration includes AES, 3DES, Kasumi, SHA-1/SHA-256, public-key accelerator, and a true random number generator. Typical applications include industrial and networked printers, multi-function peripherals, industrial control and factory automation gateways, ruggedized networking equipment, secure routers and VPN concentrators, and small-form-factor industrial servers. The absence of an integrated Ethernet switch reduces BOM cost for applications that already provide external switching, while the integrated PHYs and SEC engine minimize external component count. When designing with this device, ensure the FC-PBGA-780 substrate has adequate microvia stack-up to route the DDR3L/DR4 byte lanes with matched impedance. The thermal design must account for the 1.4 GHz quad-core power envelope; a heatsink or thermal interface material is recommended at sustained workloads above 70 percent utilization across all four cores. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

T2080NSE8MQB

T2080NSE8MQB - QorIQ T2 4-Core 1.2GHz e6500 MPU | NXP

The NXP Semiconductors T2080NSE8MQB is a QorIQ T2 family communications microprocessor based on the 64-bit Power Architecture e6500 core, delivering four dual-threaded cores running up to 1.2 GHz (eight virtual threads) on a 28 nm process. The device is housed in a 896-ball FCBGA (FCPBGA) package measuring 25x25 mm and targets mid-range networking workloads including routers, switches, and security appliances. A microprocessor (MPU) is an integrated circuit that contains the central processing unit, cache hierarchy, memory controller, and a wide range of on-chip peripherals. Within the broader taxonomy, an MPU sits above a microcontroller (MCU) in computational capability and is below an application processor in feature integration; it belongs to the power management-adjacent silicon layer that bridges the network datapath and software-defined control plane. The T2080NSE8MQB is positioned between quad-core devices such as T1042 and the flagship T4240, offering P4080-comparable compute density at lower power and cost. Key features include four PowerPC e6500 cores with hardware-assisted virtualization and 64-bit addressing, a 1.6 GT/s DDR3/DDR3L memory controller with ECC support, and four 10 Gigabit Ethernet MACs (XFI/KR) plus eight 1 Gbit/s MACs (SGMII). Integrated security engines accelerate IPSec, SSL/TLS, and IEEE 1619 cryptography without host CPU intervention. The integrated SerDes lanes and hardware queue managers support line-rate packet processing while keeping the host core free for control-plane software. Architecturally, the T2080NSE8MQB pairs the e6500 core complex with shared L2 cache, a 256-bit CoreNet coherency fabric, and 20 lanes of SerDes that can be configured as PCI Express Gen 2/3, Serial RapidIO, or 10 GbE/KR. The 28 nm CMOS process keeps typical SoC power within range of conventional airflow cooling and operates across a 0 C to 105 C junction range suitable for industrial networking hardware. Typical applications include enterprise routers and security gateways, multi-service access nodes, network attached storage controllers, industrial firewalls, and LTE/Wi-Fi offload modules. It also serves as a drop-in upgrade for T1042 designs that need additional cores and 10 GbE interfaces, and as a value-engineering alternative to P4080 designs that need to reduce bill of materials. When designing with this device, follow NXP hardware design guides for FCBGA land pattern, SerDes reference clock jitter, and DDR3L fly-by topology. Decoupling must be placed adjacent to each power pin per the reference schematic, and thermal vias are mandatory under the lidless package top to meet the 105 C junction specification under worst-case network load. This page synthesizes distributor pricing, sibling MPN options, and practical board-level design guidance that is not duplicated in the NXP product brief, accelerating BOM decisions and PCB layout review.

Cotización Contacto

T2080NXE8PTB

T2080NXE8PTB - QorIQ 8x 1.5GHz 64-bit MPU, 4x10GE | NXP

The NXP T2080NXE8PTB is a 28 nm QorIQ T2080 communications processor integrating four PowerPC e6500 dual-threaded cores running at up to 1.533 GHz with eight virtual threads, delivering 8x 1.5 GHz computational throughput for high-end networking and communications workloads. The device integrates four 10 Gigabit Ethernet controllers, an 1.87 GT/s DDR3/DDR3L memory controller with ECC support, hardware-accelerated cryptography, and SerDes lanes supporting multiple interconnect standards. It is packaged in a 25x25 mm 896-ball FCBGA (FC-PBGA) suitable for thermally demanding carrier-grade designs. A communications processor (CP) is a specialized microprocessor that combines general-purpose CPU cores with tightly integrated networking, security, and memory subsystems, occupying a tier between application processors and standalone network ASICs. Within the embedded taxonomy, the T2080 belongs to the QorIQ T2 series, which itself descends from Power Architecture-based communications platforms spanning L2/L3 switches, base stations, and edge routers. The e6500 core brings the architectural lineage of the T4240 flagship into a more power- and pin-efficient package. Key differentiating specifications include the e6500 dual-threaded core (eight hardware threads across four physical cores), 1.87 GT/s DDR3/DDR3L with ECC, four integrated 10 GbE MACs plus additional lower-speed Ethernet, hardware crypto acceleration, and -40C to +105C industrial temperature range support. The combination of 10 GbE MACs with hardware crypto acceleration in a single 28 nm die enables line-rate secure processing without off-chip coprocessors. The T2080 architecture implements the Book-E enhanced Power ISA with hypervisor-aware virtualization, a coherent fabric interconnecting cores and I/O, and queue manager acceleration for buffer descriptors. The integrated security engine supports symmetric ciphers, public-key algorithms, and true random number generation, offloading what would otherwise consume CPU cycles. Dynamic power management scales per-core frequency and voltage independently, allowing designers to trade throughput against thermals in thermally constrained SFP-router and MEC platforms. Typical applications for the T2080NXE8PTB include enterprise routers, multi-service switches, network-attached storage controllers, industrial gateways, LTE/5G small-cell base stations, and network security appliances. The integrated 4x10G plus multi-port 1G/2.5G Ethernet and hardware crypto make it especially suited for IPsec/SSL VPN gateways and line-rate deep-packet inspection systems. A key design consideration is PCB layout for the 896-ball FCBGA - a multilayer PCB with a continuous ground plane beneath the package is required for signal integrity of the multi-GHz SerDes lanes. Designers must also provide robust heatsinking because at 1.533 GHz the T2080 dissipates substantial power; airflow of at least 200 LFM is typically required for full-speed industrial operation. This page synthesizes distributor pricing, drop-in alternatives, design notes, and comparison tables that go beyond the manufacturer datasheet, helping procurement and design teams make informed decisions for next-generation networking platforms.

Cotización Contacto

T2081NSE8PTB

T2081NSE8PTB - QorIQ T2 4C 1.5GHz 896-FCPBGA | NXP Semiconductors

The NXP Semiconductors T2081NSE8PTB is a QorIQ T2 family communications processor built on the 64-bit Power Architecture e6500 core, integrating 4 physical cores that present 8 hardware threads (dual-threaded SMT) at up to 1.533 GHz core frequency. The SoC pairs the CPU complex with a high-bandwidth DDR3/DDR3L memory controller rated at 1.87 GT/s and dual 10 Gigabit Ethernet MACs, plus integrated cryptographic acceleration, all housed in a 896-ball FCPBGA (25x25 mm) package. Operating temperature range is 0C to +105C (extended industrial/communications grade). A QorIQ communications processor is a system-on-chip designed for high-throughput packet processing, line-rate forwarding, and control-plane workloads in networking infrastructure. Within the broader taxonomy it sits as: communications processor -> multicore SoC -> embedded MPU -> microprocessor -> IC. The T series spans the T1 (T1040/T1042, quad-core entry), T2 (T2080/T2081, mid-range octal-thread), and T4 (T4240 flagship) tiers; T2081 is positioned as the smaller-footprint, lower-cost variant of the T2080. Key features include four e6500 dual-threaded cores delivering up to 1.5 GHz / 1.8 GHz core frequency with hardware virtualization (hypervisor) support, a 64-bit DDR3/3L controller with ECC supporting up to 1.87 GT/s, two 10 Gigabit Ethernet ports plus additional 1G/2.5G interfaces, integrated SEC crypto acceleration (SEC 5.x), DPAA packet-processing engines, SerDes for multiple protocol modes, and Trust Architecture 2.x secure boot. The e6500 core implements a 7-stage out-of-order pipeline with hardware threads, allowing eight logical contexts across four cores for parallel packet handling. Manufacturing on 28 nm CMOS process keeps power consumption in a band suitable for fan-cooled line cards while retaining T4240-class architectural features at lower cost. Typical applications include enterprise routers and switches, multi-service gateways, control-plane processing in service-provider equipment, network-attached security appliances, industrial networking, and value-engineering upgrades from P4080 or T1042 designs where pin compatibility enables drop-in scalability. When designing with T2081, the 896-FCPBGA requires careful PCB stack-up with microvia technology, matched-length SerDes routing for the 10GbE lanes, and dedicated DDR3/DDR3L impedance-controlled memory layout; thermal management must account for the 25x25 mm top-side dissipation area. This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the QorIQ T series, and practical design notes covering PCB stack-up, SerDes routing, and thermal dissipation that go beyond the manufacturer datasheet alone.

Cotización Contacto

T2081NSE8TTB

T2081NSE8TTB - QorIQ T2 64-bit 8-thread 1.8GHz SoC | NXP

The NXP T2081NSE8TTB is a QorIQ T2 series communications processor built on a 28 nm CMOS process, integrating four dual-threaded PowerPC e6500 cores at up to 1.8 GHz for an effective eight virtual-core platform. The device is delivered in a 780-ball FC-PBGA package (23x23 mm) and supports DDR3/DDR3L memory at up to 1.87 GT/s, two 10 Gigabit Ethernet controllers plus eight 1 Gbps and four 2.5 Gbps interfaces, and an integrated security engine with crypto acceleration enabled. A QorIQ communications processor is a system-on-chip (SoC) designed for high-throughput wired and wireless networking equipment such as routers, switches, base stations, and network-attached storage. The T series (T1, T2, T4) is NXP's flagship 64-bit Power Architecture line, where each tier scales core count, cache, SerDes lanes, and Ethernet interfaces; the T2081 specifically targets mid-range applications that require T4240-class architectural innovation at lower power and price points than the flagship. Key differentiating features of the T2081 include its dual-threaded e6500 cores (Hypervisor-aware virtualization), a 1.87 GT/s DDR3/3L controller with ECC, integrated 10 Gigabit Ethernet MACs, hardware-accelerated cryptography (SEC engine), and a flexible SerDes block supporting multiple protocol modes. The 28 nm process enables a typical power envelope suitable for fan-cooled networking chassis, while the 780-ball FC-PBGA provides the pin density required for high-bandwidth memory and SerDes signal routing. Architecturally, the T2081 shares the e6500 core complex and datapath with the T4240, T2080, and T1042 family members, allowing common software development across the T series. The chip integrates three PCIe controllers, two SATA 2.0 interfaces, two USB 2.0 ports, four UARTs, an enhanced secure host boot controller, and a memory-mapped DDR3/3L controller. Compared with the larger T2080, the T2081 uses a smaller package while preserving pin-compatibility with the quad-core T1042, enabling T1042 customers to scale up without PCB rework. Typical applications include enterprise and carrier-grade routers, network switches, wireless base stations, network security appliances, industrial control with deterministic networking, and enterprise-class storage controllers. The combination of virtualization-ready cores, hardware cryptography, and high-speed Ethernet makes the T2081 well suited for SDN/NFV workloads and embedded networking where Linux, VxWorks, or NXP's SDK environments run. When designing with the T2081, allocate at least 4 PCB layers for impedance-controlled SerDes routing, follow NXP's hardware reference manual for DDR3 byte-lane matching, and ensure thermal vias under the package to keep the junction within the 0-105C operating range. Designers should also leverage NXP's SDK and reference board design to accelerate boot ROM, RCW (Reset Configuration Word), and SERDES protocol bring-up. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated in any single manufacturer PDF. Engineers can use it as a working reference for sourcing, footprint reuse, and platform-migration decisions across the T1042/T2080/T2081/T4240 family.

Cotización Contacto

T2081NXE8MQB

T2081NXE8MQB - QorIQ T2 8x 1.2GHz MPU, 2x10GE, Crypto | NXP

The NXP T2081NXE8MQB is a QorIQ T2-series communications processor built on 28 nm CMOS, integrating four dual-threaded 64-bit Power Architecture e6500 cores running at up to 1.2 GHz and packaged in a 780-pin FCPBGA (25x25 mm). The device delivers eight virtual threads via e6500 hardware multithreading and is paired with dual 10 Gigabit Ethernet controllers, a 1.6 GT/s DDR3/DDR3L memory controller with ECC, and hardware-accelerated cryptography. A microprocessor (MPU) is a system-on-chip integrating one or more processor cores, memory controllers, high-speed I/O, and peripherals onto a single die, distinct from a microcontroller by providing external memory and higher throughput. The QorIQ family sits at the top of NXP's communications-processing hierarchy - MPUs feed into SoCs, then into embedded processors, then into the broader semiconductor taxonomy. The T-series is NXP's flagship communications line, and T2081 inherits architectural innovations from the flagship T4240 in a smaller, lower-power package. Key features include 8 virtual cores (4 cores x 2 threads), 1.6 GT/s 64-bit DDR3/3L memory controller with ECC, two integrated 10 Gigabit Ethernet MACs (10GE), and crypto acceleration with SEC 5.x engines. The part is pin-compatible with the quad-core T1042, enabling an upgrade path to higher throughput, and represents a value-engineering replacement for the older P4080 at lower power. Operating temperature range is -40C to +105C, with extended-reliability qualification suited for industrial and embedded environments. The e6500 core combines dual-issue out-of-order execution with hypervisor-grade virtualization, while the integrated CoreNet coherency fabric sustains simultaneous traffic across cores, memory, and networking peripherals at line rate. SEC 5.x engines accelerate symmetric ciphers, public-key operations, and true random number generation offloading the cores for protocol processing. Typical applications include enterprise and industrial networking routers and switches, network-attached storage controllers, military/aerospace secure communications platforms, industrial control gateways, and LTE/small-cell baseband processing. The T2081's balance of CPU throughput and packet-processing offload makes it well-suited for L2-L7 forwarding planes in mid-range networking equipment. When designing with the T2081NXE8MQB, allocate PCB area for the 25x25 mm FCPBGA land pattern, follow NXP's reference layout for CoreNet routing, and design a robust thermal solution: at full load the device dissipates on the order of tens of watts. Use point-to-point link training and signal-integrity simulation for 10GE SERDES lanes to guarantee margin. This page synthesizes distributor pricing (as of 2026-10-17), drop-in NXP QorIQ alternatives, and practical design notes not found in the standalone datasheet.

Cotización Contacto

T2081NXE8PTB

T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP

The NXP T2081NXE8PTB is a QorIQ T2 series 64-bit quad-core microprocessor built on PowerPC e6500 cores running at 1.533 GHz, housed in a 896-pin FCPBGA (25x25 mm) package. It integrates four e6500 cores with hardware hypervisor support, dual 10 Gigabit Ethernet controllers, eight 1 Gbps Ethernet MACs, DDR3/DDR3L memory controllers rated up to 1.87 GT/s, and high-bandwidth SerDes interfaces for networking and data-plane workloads. A microprocessor (MPU) is the central processing unit of an embedded computing system that integrates CPU cores, caches, memory controllers, and peripheral interfaces on a single die. The QorIQ T2 family sits in NXP's communications-processor hierarchy above the QorIQ T1 (T1040/T1024) and below the QorIQ T4 (T4240), targeting mid-range wired and wireless infrastructure, control-plane processing, and data-path offload applications where multi-core scalability and packet processing throughput matter. Key features include four PowerPC e6500 dual-threaded cores (up to 8 threads), 32 KB I-cache and 32 KB D-cache per core with 256 KB shared backside L2, hardware virtualization (hypervisor) support, 64-bit DDR3/3L controller with ECC at 1.87 GT/s, two 10 GbE (XFI/KR) ports, eight 1 GbE MACs, three PCIe Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers, and integrated security (SEC) engines with hardware-accelerated crypto. The T2081NXE8PTB is the smaller-footprint (25x25 mm FCPBGA) variant of the T2080 and is pin-compatible with the quad-core T1042, giving designers an upgrade path from T1042 designs to higher core count without board rework. The SoC is fabricated in 28 nm process technology, balancing performance per watt for thermally constrained networking line cards. Typical applications include enterprise and SMB routers, LTE/small-cell base stations, network-attached storage (NAS), industrial control gateways, and secure VPN/UTM appliances. The dual 10 GbE and eight 1 GbE ports support line-rate packet inspection and forwarding, while DDR3L at 1.87 GT/s sustains deep packet buffer and routing table lookups. When laying out the PCB, allocate a minimum 4-layer stack-up with continuous ground planes under the FCPBGA, follow NXP's layout guide for SerDes reference clock routing (impedance-controlled, length-matched differential pairs), and provide sufficient bulk decoupling near the core and memory rails to handle 1.533 GHz load transients during packet bursts. This page synthesizes distributor pricing, drop-in alternatives drawn from the NXP QorIQ T2 family, and practical design notes not collected in a single manufacturer document, helping engineers choose between T2081, T2080, T1042, and competing 64-bit MPUs more efficiently.

Cotización Contacto

T2081NXN8MQB

T2081NXN8MQB - QorIQ 4-Core 1.2GHz MPU BGA | NXP

NXP Semiconductors T2081NXN8MQB is a QorIQ communications processor built on 64-bit Power Architecture with four e6500 dual-threaded cores running at 1.2 GHz, giving eight virtual threads in total. Per NXP's QorIQ T2 family positioning, the T2081 is the smaller-package variant of the T2080 flagship, pin-compatible with the quad-core T1042 for easy performance scaling. The device integrates dual 10 Gigabit Ethernet MACs, a DDR3/3L memory controller rated to 1.6 GT/s with ECC, hardware-accelerated pattern matching, and SerDes supporting multiple interface protocols. This part belongs to the QorIQ T series of communications processors, a category of 64-bit Power Architecture multicore SoCs targeting networking, industrial control, and military/aerospace platforms. Within the broader SoC taxonomy, the QorIQ T2 sits between the dual-core T1 family and the higher-end quad-/octal-core T4 devices, and is fabricated on a 28 nm process for a strong performance-per-watt envelope. Cryptographic acceleration and SEC engines are present in related variants but are explicitly disabled on the T2081NXN8MQB (the 'N' suffix denotes no-crypto build). Designers familiar with P4080 can use T2080/T2081 as a pin-compatible upgrade path with lower power and cost. Key features include four e6500 cores at 1.2 GHz supporting hardware hypervisor virtualization, two 10G Ethernet controllers, a 64-bit DDR3/3L controller with ECC up to 1.6 GT/s, two PCIe controllers, and a 780-ball FCBGA package (25x25 mm). The industrial temperature grade of -40C to +105C and the long-life product program make it attractive to defense and aerospace integrators. Architecturally the SoC uses a coherent fabric with on-chip SRAM, dedicated L2 caches per pair of cores, and a hardware queue manager for packet processing. The 28 nm process enables lower static and dynamic power relative to the 45 nm T4240, while maintaining the same e6500 ISA and programming model. Crypto modules are masked out in this part number, freeing thermal and silicon budget for the throughput-oriented cores. Typical applications include software-defined networking (SDN) line cards, industrial routers and protocol converters, network-attached storage controllers, military secure communications (when not requiring on-die crypto here is replaced by an external accelerator), and printed-circuit board-mounted industrial gateways. The compact 25x25 mm FCBGA package and industrial temperature grade support dense SBC and OpenVPX/VPX modules. When designing with this device, ensure the PCB stackup supports the DDR3/3L 1.6 GT/s interface and provides sufficient via-in-pad microvia thermal relief for the 780-ball FCBGA. Plan external PCIe and SGMII routing to keep reference-clock jitter within the SerDes mask, and budget for a multi-rail power supply with sequenced rails - typical designs use a discrete management MCU plus a suite of regulators, since the SoC's power-on sequence is non-trivial. This page synthesizes distributor inventory snapshots, pin-compatible QorIQ drop-in options, and practical board-design notes not collected in a single spot inside the NXP datasheet. It is intended as a complementary engineering reference.

Cotización Contacto

T4080NSE7PQB

T4080NSE7PQB - QorIQ T4 8-Core 1.5GHz Power Arch MPU | NXP

The NXP T4080NSE7PQB is a QorIQ T4 series multi-core communications processor integrating 8 virtual cores (4 physical e6500 cores with hardware multithreading) running at up to 1.5 GHz on a 64-bit Power Architecture, packaged in a 1932-ball FCPBGA (45x45 mm) with operating temperature 0C to 105C and silicon revision 2.0. What is a QorIQ communications processor? A QorIQ processor is a high-end Power Architecture system-on-chip (SoC) family from NXP designed for networking infrastructure such as routers, switches, base stations, and security appliances. QorIQ belongs to the broader category of embedded MPUs (microprocessor units), which are microprocessors designed for non-desktop applications like industrial control, networking, and storage. Within that hierarchy QorIQ sits at the top alongside other networking SoCs from Broadcom, Cavium/Marvell, and Intel Xeon-D processors, offering integrated high-speed serial interfaces, hardware acceleration engines, and ECC-protected memory controllers in a single BGA package. Key features include the e6500 dual-threaded Power Architecture core complex delivering up to 1.5 GHz per thread, dual 10 Gigabit Ethernet controllers, a DDR3L memory controller with speeds up to 1.6 GT/s, integrated cryptographic and pattern-matching accelerators, and SerDes lanes for multiple high-speed interconnect standards. The 1932-FCPBGA package provides sufficient routing density and thermal mass for sustained industrial-temperature operation while exposing the full QorIQ T4 platform I/O. The T4080 implements NXP's Data Path Acceleration Architecture (DPAA) and CoreNet fabric, which offload queue management, buffer allocation, and security processing from the cores. This allows line-rate packet processing at 10 GbE and 40 GbE aggregate throughput while keeping the cores available for control-plane workloads. Hardware virtualization, extended MMU translation, and ECC on all memory interfaces make the part suitable for virtualized network functions and trusted execution environments. Typical applications include enterprise and service-provider routers, multi-service switches, network-attached storage controllers, LTE base-station baseband units, and network security appliances. The T4080 pairs with companion NXP QorIQ devices such as the T4240 (24 virtual cores) for slot aggregation and the T4160 (16 virtual cores) for mid-range routing line cards. Designers should plan thermal management around a TDP-class dissipation budget and follow NXP reference design guidelines for CoreNet and SerDes layout to achieve the rated 1.6 GT/s DDR3L performance. The Rev 2.0 silicon is the current production stepping and is required for full feature support including the integrated crypto engine and pattern-matching accelerator. This page synthesizes distributor pricing, QorIQ T4 family cross-reference, and BGA-level design notes that are not consolidated in any single manufacturer document.

Cotización Contacto

T4080NSE7QTB

T4080NSE7QTB - QorIQ T4 8-Core 1.8GHz PowerPC MPU | NXP

The NXP T4080NSE7QTB is a QorIQ T4 family communications processor based on the 64-bit Power Architecture e6500 core, integrating 8 hardware threads operating at up to 1.8 GHz in a 1932-ball FCBGA (45x45 mm) package with industrial 0-105C thermal range. A communications processor (CP) is a specialized microprocessor designed for networking and telecom infrastructure where deterministic packet processing, high memory bandwidth, and integrated high-speed serial interfaces replace the general-purpose peripherals found on application processors. Within the broader taxonomy it belongs to the QorIQ family of Power Architecture SoCs, positioned between application processors and pure network ASICs. The T4 line covers 8 to 24 virtual cores in a single pin-compatible package, enabling one PCB design to scale across multiple SKUs. Key features include 8 hardware threads on 4 physical e6500 cores, dual 10 Gigabit Ethernet controllers, integrated security (crypto enabled), DDR3L memory controller with 1.87 GT/s data rate per the verified distributor datasheet string, and silicon revision 2.0. The e6500 core introduces hardware hypervisor support and out-of-order execution tailored for control-plane and data-plane packet handling. From an architecture standpoint the device combines the e6500 superscalar core, CoreNet coherency fabric, data path acceleration (DPAA), and SerDes lanes that map directly to networking PHYs. The 1.87 GT/s DDR3L controller supports registered ECC DIMMs, critical for sustained line-rate forwarding on hot packet flows. Typical applications include enterprise routers, Layer 2/3 switches, network security appliances, LTE baseband offload, and edge compute platforms where deterministic multi-core throughput is required. When designing with this device, ensure adequate thermal management: the 45x45 mm FCBGA exposes a thermal interface pad for a heatsink or cold plate. Power sequencing and DDR3L termination must follow the QorIQ T4 hardware specification. This page synthesizes distributor pricing, pin-compatible alternatives, and design considerations not found in the manufacturer datasheet alone.

Cotización Contacto

T4080NXE7PQB

T4080NXE7PQB - QorIQ T4080 4-Core 1.8GHz PowerPC MPU | NXP

The NXP T4080NXE7PQB is a QorIQ T4080 communications microprocessor built on the 64-bit PowerPC e6500 core architecture, integrating 4 physical cores (8 threads via SMT) at up to 1.8 GHz in a 1932-pin FCBGA (45x45 mm) package. It supports DDR3/DDR3L memory with up to 1.6 GT/s data rate, integrates 13 Gigabit Ethernet MACs plus two 10 Gigabit Ethernet interfaces, and includes hardware-accelerated cryptography and pattern matching engines for security and deep-packet inspection. A communications microprocessor (MPU) is a high-performance system-on-chip designed for wired and wireless networking infrastructure, replacing the CPU, northbridge, and large portions of I/O logic in a single device. MPU sits above the microcontroller in the embedded taxonomy: microcontroller -> embedded MPU -> application processor -> SoC. QorIQ devices sit in the networking/datacom tier and are typically paired with PHYs, switch fabrics, SERDES, and external memory. The T4080NXE7PQB key features include: 4 e6500 cores with hardware multithreading (8 logical threads), 64-bit datapath, 28nm process technology, integrated 1 Gbps Ethernet MACs, 10 Gbps XAUI/KR interfaces, hardware crypto (SEC), L2 and L3 cache, virtualization (hypervisor) support, Trust Architecture, and the QorIQ Data Path Acceleration Architecture (DPAA) for packet parsing and QoS. The e6500 core is a superscalar out-of-order dual-threaded core using the Book-E instruction set plus AltiVec SIMD, with a private L1 cache per thread and a shared L2/L3 hierarchy. DPAA offloads buffer management and queue scheduling, freeing the cores to run control-plane software such as routing stacks (Linux, VxWorks, eCos) or protocol stacks (IPsec, SSL/TLS). Typical applications include enterprise routers, service-provider edge and aggregation routers, 3G/4G/LTE base stations, network security appliances (firewall/UTM/IDS), IP-PBX, industrial Ethernet gateways, and software-defined networking (SDN) controllers. The 1.6 GT/s DDR3L controller with ECC is essential for sustained packet throughput, while 13x GbE plus 2x 10GbE enables dense multi-port fan-out. Design consideration: the 1932-pin FCBGA requires a high-density PCB build (microvias, HDI, controlled-impedance SERDES routing) and a solid power-delivery network. Power, thermal, and SI co-design are mandatory at 1.8 GHz. Use JEDEC -40C to +105C ambient under extended industrial airflow. This page synthesizes distributor pricing, pin-compatible T4-family alternatives, and practical design notes not collected on any single distributor or manufacturer page, giving engineers a single source for selection, qualification, and sourcing decisions.

Cotización Contacto

T4160NSE7QTB

T4160NSE7QTB - QorIQ T4 8-Core 1.8GHz PowerPC SoC | NXP

The NXP Semiconductors (formerly Freescale) T4160NSE7QTB is a QorIQ T4 series multi-core communications processor featuring 8 PowerPC e6500 cores operating at up to 1.8 GHz, delivering 16 hardware threads via Simultaneous Multi-Threading (SMT), housed in a 1932-ball FCPBGA package measuring 45x45 mm with a 0.8 mm pitch. The SoC integrates dual 10 Gigabit Ethernet controllers plus 13 Gigabit Ethernet ports and a DDR3/DDR3L memory controller capable of 1.87 GT/s operation, with hardware-accelerated cryptography enabled for secure boot and IPsec/TLS workloads. A QorIQ communications processor is a system-on-chip (SoC) designed for high-performance networking infrastructure such as routers, switches, security appliances, and wireless base stations. Positioned in the broader taxonomy, the QorIQ family belongs to the power architecture communications processor segment, sitting between standard embedded microcontrollers and high-end server CPUs, optimized for deterministic packet processing, deep pipeline acceleration, and tight integration of networking peripherals. Within the T-series lineup, the T4 family spans the T4080 (8 threads), T4160 (16 threads), and the flagship T4240 (24 threads), all sharing a pin-compatible package to enable scalable product lines. Key features include eight PowerPC e6500 cores with dual-thread SMT, integrated DPAA (Data Path Acceleration Architecture) for hardware offload of packet parsing, queueing, and crypto, an SEC engine for symmetric and asymmetric cryptography, and dual PCIe Gen 2 controllers. The device targets 0 to 105 degrees C extended temperature operation suitable for industrial networking equipment, supports Trust Architecture 2.0 secure boot, and provides SerDes lanes configurable for SGMII, XAUI, KR, and PCIe. The T4160NSE7QTB employs the e6500 Power Architecture core with 64-bit datapath, superscalar out-of-order execution, and AltiVec-compatible SIMD engine for data-plane workload acceleration. The integrated CoreNet coherency fabric interconnects cores, memory controller, and I/O blocks, delivering high bandwidth with low latency. Memory controller supports DDR3 and DDR3L at 1.87 GT/s with ECC, providing up to 64-bit wide interfaces. The crypto engine delivers line-rate IPSec, SSL/TLS, and SRTP processing without CPU intervention. Typical applications include enterprise routers and switches, network attached storage (NAS), 4G/LTE small cells, IPsec VPN gateways, network functions virtualization (NFV) platforms, and industrial control planes. The T4160 fits workloads requiring multi-Gbps throughput combined with deterministic control-plane latency and hardware-accelerated security. When designing with this device, plan the PCB layout for the large 45x45 mm FCPBGA package with proper microvia stack-up and at least 8 signal layers for SerDes routing. Use NXP's QorIQ SDK and CodeWarrior toolchain for firmware development. Allocate sufficient cooling for typical 30-45 W power dissipation, and validate DDR3L signal integrity with IBIS-AMI simulation before tape-out.

Cotización Contacto

T4160NSE7TTB

T4160NSE7TTB - QorIQ T4 8-Core 1.8GHz Power Arch MPU | NXP

The NXP T4160NSE7TTB is a QorIQ T4 series 64-bit Power Architecture microprocessor with 8 physical cores (16 threads via simultaneous multithreading) running at 1.8 GHz, housed in a 1932-ball FCPBGA (45x45 mm) package. It integrates 4x 10 Gigabit Ethernet controllers, a DDR3L memory controller supporting up to 1.8 GT/s data rate, and hardware-accelerated cryptography, and is specified for the commercial 0 to 105 C temperature range. A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more processor cores, cache hierarchies, memory controllers, and a wide range of on-chip peripherals. QorIQ communications processors extend the MPU concept into networking and telecom infrastructure, combining general-purpose compute with hardware accelerators for packet processing, security, and high-speed SerDes. The T4 series sits in NXP's mid-to-high tier of the QorIQ roadmap, below the flagship T4240 (12 cores/24 virtual cores) and above the T2081 (4 cores). Key features of the T4160NSE7TTB include the e6500 core with AltiVec SIMD support, hardware pattern matching and traffic management accelerators, integrated SEC crypto engine, and dual-core memory subsystem with 64-bit DDR3L interface. The SerDes block supports 4x 10G plus multiple lower-speed lanes, enabling line-rate processing for enterprise and service-provider routers. Architecturally, the T4160 is built on a 28 nm process with a coherent shared-memory fabric across all cores, allowing symmetric multiprocessing across the 16 threads. Each pair of cores shares a private L2 cache, and a shared L3 cache backs the coherent bus, reducing DDR traffic for typical networking workloads. Typical applications include enterprise routers, service-provider edge equipment, network-attached storage controllers, industrial IoT gateways, and security appliances that require multi-gigabit throughput with hardware crypto offload. The part's combination of 16 threads and integrated 10 GbE makes it well suited for control- and data-plane co-processing in a single SoC. When designing with the T4160NSE7TTB, pay close attention to PCB layout: the 1932-ball FCPBGA requires high-density routing with microvia or sequential lamination stack-ups, and the integrated SerDes lanes need controlled-impedance routing with reference-plane continuity to meet 10.3125 Gbps signaling margins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer's product page alone.

Cotización Contacto

T4160NSN7QTB

T4160NSN7QTB - QorIQ 16x 1.67GHz SoC, 2x10GE, FCBGA-1932 | NXP

The NXP T4160NSN7QTB is a 64-bit multi-core communications processor from the QorIQ T4 family, featuring 16 virtual cores based on the Power Architecture at 1.67 GHz, integrated dual 10 Gigabit Ethernet MACs, a DDR3L memory controller rated at 1.87 GT/s, and 1932-ball FCBGA packaging with industrial 0°C to 105°C thermal support and crypto features disabled. The part is positioned as the mid-tier SKU of the pin-compatible T4080/T4160/T4240 family, offering a 2x core-count step from the T4080 and a balanced power-performance profile for networking line cards and control plane workloads. A communications SoC is a system-on-chip that integrates CPU cores, memory controllers, packet-processing accelerators, and high-speed serial interfaces into a single device. Within the NXP product hierarchy the T4160 belongs to the QorIQ family, which sits in the broader category of Power Architecture (PowerPC/e600) embedded processors used primarily in networking equipment. The T4160NSN7QTB extends the line into the 16-thread segment, serving designs that need more compute than T4080-based boards but less power than the 24-thread T4240 flagship. Key features include 16 e6500 Power Architecture virtual cores (eight dual-threaded physical cores), 1.67 GHz core frequency with frequency scaling up to 1.8 GHz supported in the family, two integrated 10 Gigabit Ethernet (10GE) controllers, a 64-bit DDR3L memory controller at up to 1.87 GT/s, and Data Path Acceleration Architecture (DPAA) for inline packet parsing, queue management, and cryptographic acceleration. The FCBGA-1932 package provides the high-bandwidth interconnect required for 10GE-class networking products. The T4160NSN7QTB is built on a 45 nm CMOS process and shares a pin-compatible FCBGA-1932 footprint with the T4080 (8 threads), T4240 (24 threads), and the low-power T4161/T4081/T4241 variants, allowing a single PCB design to be deployed at three performance points. The DPAA engine and tightly coupled core complex are designed for deterministic throughput on packet pipelines where cache misses and arbitration delays are unacceptable. Typical applications include multi-service routers and switch control planes, enterprise and edge firewalls, LTE/4G base station baseband processing, network-attached storage controllers, and unified threat management appliances. The dual 10GE MACs and DDR3L bandwidth make it well suited to aggregated traffic workloads where packet header processing dominates. Design considerations include careful PCB stack-up planning because the FCBGA-1932 has a 1.0 mm pitch and high-speed DDR3L routing for byte lanes with matched impedance and length; designers must follow NXP's hardware design guide for decoupling, SerDes reference clock jitter, and thermal management under sustained DPAA loads. This page consolidates distributor pricing, NXP part-numbering interpretation, drop-in T4-family alternatives, and engineering design notes that go beyond the manufacturer's official datasheet to assist board-level architects.

Cotización Contacto

T4160NSN7TTB

T4160NSN7TTB - QorIQ 16-Core 1.8GHz Power Arch MPU | NXP

The NXP (formerly Freescale) T4160NSN7TTB is a QorIQ T4-series communications microprocessor built on a 64-bit Power Architecture e6500 core complex, delivering 16 hardware threads across 8 dual-threaded cores at up to 1.8 GHz, in a 1932-ball FC-PBGA package (45x45 mm). It is the 16-thread member of the T4 family, pin-compatible with the 24-thread T4240 and 8-thread T4080 within a 3x performance scaling envelope. What is a QorIQ communications processor? A QorIQ processor is a multi-core Power Architecture microprocessor designed by NXP for networking and data-plane workloads such as routers, switches, wireless baseband, and security appliances. As a category, QorIQ sits in the hierarchy: microprocessor unit (MPU) -> embedded processor -> communications processor -> networking SoC. The T4 family targets high-end control-plane and data-plane processing for terabit-class routers, service-provider gateways, and network-attached storage. Key features of the T4160NSN7TTB include a 1.8 GT/s DDR3L memory controller with ECC, integrated 4x 10 Gigabit Ethernet (10GE) plus 8x 1 Gigabit Ethernet (1GE) SerDes lanes, hardware cryptography disabled in this -NS suffix (T4160NS variant), and operating junction temperature support of 0C to 105C in Rev 2.0 silicon. The device integrates packet-processing acceleration engines, a high-bandwidth CoreNet coherency fabric, and extensive I/O including PCIe, SATA, and USB. Architecturally, the e6500 cores support hardware multithreading (SMT), out-of-order execution, and AltiVec SIMD, with a triple-issue superscalar pipeline. The CoreNet coherency fabric ensures coherency across cores and accelerators at high throughput, while the memory subsystem delivers 1.8 GT/s aggregate bandwidth to feed 16 threads without contention. Crypto variants (T4160NSN7TTB's crypto-disabled sibling T4160NSE) integrate SEC engines for IPsec and SSL offload. Typical applications include enterprise routers, service-provider edge platforms, network security appliances, LTE/WCDMA baseband processing, and high-end network-attached storage (NAS) controllers. The 16-thread configuration balanced against 10GE+1GE SerDes makes it well-suited to mid-range multi-service aggregation platforms. When designing with the T4160NSN7TTB, ensure the PCB land pattern uses the 45x45 mm FC-PBGA with a 16-layer or higher stack-up to manage the 1.8 GT/s DDR3L signals with matched impedance. Reference the NXP hardware design checklist for decoupling, SerDes routing, and thermal management. This page synthesizes distributor pricing, drop-in NXP T4-family alternatives, and design considerations not found in the manufacturer datasheet alone.

Cotización Contacto

T4160NXN7PQB

T4160NXN7PQB - QorIQ 16-Core 1.5GHz SoC | NXP Semiconductors

The NXP T4160NXN7PQB is a 64-bit Power Architecture QorIQ T4 family multicore communications processor with 16 virtual cores running at 1.5 GHz, housed in a 1932-pin FCPBGA (45x45 mm) package. It integrates a dual-channel DDR3L memory controller with up to 1.6 GT/s data rate, dual 10 Gigabit Ethernet MACs, and SerDes for high-speed I/O, with hardware cryptography disabled in this revision (Rev 2.0). Industrial temperature grade is -40C to +105C. A multicore communications SoC (System-on-Chip) is a single silicon die that integrates CPU cores, memory controllers, networking accelerators, and I/O subsystems onto one chip. The QorIQ family is built on the 64-bit Power Architecture (formerly PowerPC) instruction set, scaled for embedded networking and industrial workloads. The T4 family spans T4080 (8 threads), T4160 (16 threads), and T4240 (24 threads) in a pin-compatible package, giving designers a 3x performance scaling path on one PCB. Key features include 16 threads (8 dual-threaded e6500 cores) at 1.5 GHz, 1.6 GT/s DDR3L with ECC, two 10 Gigabit Ethernet interfaces, hardware cryptography disabled, and extended temperature operation to +105C. The 28nm process gives improved performance-per-watt versus earlier QorIQ generations, while preserving software compatibility across the T4 series. The T4160NXN7PQB ships as a tray-packaged part intended for high-density networking and industrial computing platforms. The architecture combines out-of-order Power Architecture cores with a coherent CoreNet fabric, enabling efficient parallel packet processing. The SerDes block supports multiple protocols including XAUI, XFI, KR, and SGMII, allowing direct connection to 10G/1G PHYs without external glue logic. Hardware accelerators offload pattern matching, CRC, and queue management, dramatically reducing CPU load in deep-packet-inspection workloads. The integrated security engine is present but disabled in this part revision - derivative SKUs with crypto enabled exist for adjacent use cases. Typical applications include enterprise routers and switches, network appliances, industrial control gateways, telecom base-station controllers, and aerospace/defense packet processors. The 16-thread configuration is well-suited to mid-range networking workloads - heavy enough for line-rate 10G processing yet within the power envelope of passively-cooled industrial chassis. When designing with this device, allocate a multi-layer PCB with at least 8 layers for signal integrity across the high-speed SerDes and DDR3L interfaces. The 1932-ball FCBGA requires a substrate with microvia stack-ups and matched-length routing. Thermal management must consider the 1.5 GHz core clock under sustained load - a heatsink and airflow path are required at industrial temperatures above +85C. This page synthesizes distributor pricing from Mouser and DigiKey Marketplace, NXP family-level alternative guidance, and practical layout guidance for the FCBGA-1932 footprint - information that complements the official QorIQ T4 datasheet without replacing it.

Cotización Contacto

T4240NSE7PQB

T4240NSE7PQB - 24-Core QorIQ Power Arch SoC | NXP

The NXP T4240NSE7PQB is the flagship QorIQ T4 series communications processor with 24 virtual cores based on the 64-bit Power Architecture e6500 core, running up to 1.5 GHz (1.8 GHz capable), in a 1932-ball FCPBGA package (45x45 mm). It integrates 1.6 GT/s DDR3L memory controllers and four 10 Gigabit Ethernet (10GE) MACs with classified security/crypto acceleration enabled, operating across the 0 to +105C industrial junction temperature range, with silicon revision 2.0. The device is built in a 45 nm SOI CMOS process and targets line-rate packet processing across enterprise, service-provider, and data-center networking infrastructure. A QorIQ multiprocessor is a multi-core system-on-chip (SoC) tailored for data-plane workloads such as routing, switching, security, and protocol termination. Within the broader taxonomy, QorIQ belongs to the communications processor (CP) family, which sits hierarchically below general-purpose microprocessors and above single-core MCUs. Its core advantages are deterministic throughput on parallel threads (24 hardware threads via the e6500 dual-threaded core), tight integration of packet I/O, memory controller, and acceleration engines, and an extended lifecycle suited to embedded networking OEMs. Key features include 24 virtual cores delivered by 12 physical e6500 dual-threaded cores, an integrated memory subsystem supporting DDR3L at up to 1.6 GT/s with ECC, an integrated security engine (SEC) at up to 10 Gbps for IPsec, SSL/TLS, and SRTP, four 10G plus multiple 1G Ethernet controllers with hardware L2 switching and classification, and an Enhanced Triple Speed Ethernet (eTSEC) peripheral complement. The device also offers four PCIe Gen2 controllers, RapidIO, and a complete set of peripheral I/O for system integration. The T4240 implements a coherent shared-memory architecture with the CoreNet coherency fabric, allowing all 12 dual-threaded cores to share L2 caches and the integrated 1 MB L2 per cluster. The platform's 64-bit Power Architecture ISA, hardware hypervisor extensions, and dedicated resource partitioning make it suitable for multi-tenant virtualized networking appliances. Typical applications include top-of-rack and spine switches, enterprise routers with 10G/40G uplinks, network security appliances (firewalls, UTM, IPS/IDS), wireless infrastructure controllers, and data-center server/load balancers. Its 24-thread envelope is particularly well suited to software-defined networking (SDN) control plane plus line-rate classification workloads. When designing with this device, allocate ample PCB real estate for the 1932-ball FCPBGA, follow NXP's reference design for power sequencing and SerDes reference clock jitter, and provision at least 8-layer PCB with controlled-impedance routing for the 10G KR lanes to meet IEEE 802.3ap compliance. This page synthesizes distributor pricing, drop-in same-package alternatives from the T4 family, and practical design considerations beyond the manufacturer datasheet summary.

Cotización Contacto

T4240NSN7TTB

T4240NSN7TTB - QorIQ T4 24x 1.8GHz Power Arch MPU | NXP

The NXP T4240NSN7TTB is the flagship QorIQ T4 communications processor, integrating 12 PowerPC e6500 cores running up to 1.8 GHz (24 threads with hardware multithreading), a 1.8 GT/s DDR3L memory controller, and 4x 10 Gigabit Ethernet ports in a 1932-ball FCBGA (45x45 mm) package. Crypto acceleration is disabled in this -N suffix variant, and the device is qualified for 0 to 105 degrees C operation on silicon revision 2.0. A QorIQ communications processor is a member of the multicore Power Architecture microprocessor family specifically engineered for networking and embedded infrastructure workloads. Within the broader system hierarchy, QorIQ T series sits below: QorIQ T family -> QorIQ communications processor -> Power Architecture microprocessor -> embedded MPU -> integrated circuit. These parts are positioned for routers, switches, base stations, and other data-plane equipment where deterministic throughput and high SerDes lane counts are critical. Key features include 12 dual-threaded e6500 cores providing 24 threads, 64 KB I-cache and 32 KB D-cache per core plus a shared 2 MB L2 per cluster, a 64-bit DDR3L interface supporting 1.8 GT/s with ECC, integrated 10 Gbps SerDes, multiple PCI Express Gen 2 controllers, and the Data Path Acceleration Architecture (DPAA) for hardware offload of classification, queueing, and crypto. The 45x45 mm FCBGA package exposes 1932 balls and supports high-speed signal escape required for the multi-lane SerDes. The T4240 is fabricated in 28 nm CMOS process technology and pairs the e6500 cores with NXP's CoreNet coherency fabric. The four 10 Gbps ports can also be configured as multiple 1 GbE lanes, giving designers flexibility to scale from 1G to 40G aggregate Ethernet. The architecture enables line-rate processing for routing, deep-packet inspection, and traffic management without external lookup engines. Typical applications include enterprise routers, edge gateways, network attached storage controllers, LTE and 5G base station baseband, industrial control planes, and military secure communications platforms. The wide SerDes integration makes the T4240 particularly attractive where PCB real estate and power efficiency both matter. When designing with the T4240, allocate a minimum of a 12-layer PCB stack-up to route the DDR3L byte lanes and 10G SerDes with controlled impedance. Decoupling requires roughly 50 low-ESR ceramic capacitors distributed near the core and SerDes rails, and thermal design must assume up to 35 W TDP under full thread load. This page synthesizes distributor pricing, drop-in alternatives within the T4 family, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

TAS5001PFBRG4

TAS5001PFBRG4 - Digital Audio PWM Processor | TI | 48-TQFP

The TAS5001PFBRG4 is a true digital audio amplifier digital audio PWM processor from Texas Instruments, designed for high-quality digital audio amplification. It is housed in a 48-pin TQFP (7x7 mm) package and operates as a 2-channel audio signal processor. The device delivers a 96-dB dynamic range and a THD+N of 0.08% at 1 kHz, making it suitable for demanding audio applications. A digital audio PWM processor is a specialized integrated circuit that converts digital audio data (such as I2S or TDM) into a pulse-width modulated (PWM) signal that can directly drive a class-D power stage. This approach enables efficient, high-fidelity amplification by keeping the audio signal in the digital domain until the final output stage, minimizing analog distortion and noise. The TAS5001 is part of the broader class of digital audio amplifiers, which are essential in modern consumer electronics, automotive infotainment, and professional audio equipment. Key features of the TAS5001PFBRG4 include a 96-dB dynamic range, 0.08% THD+N at 1 kHz, and support for 2-channel audio processing. The device is designed to work with the TAS5100 power stage to form a complete digital amplifier system, achieving a system-level dynamic range of 93 dB measured at the speaker terminals. The PWM processor handles digital audio data with high precision, ensuring low distortion and noise. Technically, the TAS5001 employs advanced digital signal processing to generate PWM signals with minimal jitter and high linearity. It accepts standard digital audio formats and provides the necessary control signals for the external power stage. The device operates from a 3.3V supply and is specified for the industrial temperature range, making it robust for various environments. Typical applications include home theater systems, soundbars, active speakers, and automotive audio systems. The TAS5001's high dynamic range and low distortion make it ideal for applications where audio fidelity is critical. Its digital architecture simplifies system design by eliminating analog pre-amplification stages. When designing with the TAS5001, ensure proper decoupling of the power supply and careful PCB layout to minimize noise coupling. The device requires an external power stage (e.g., TAS5100) and a microcontroller for control, so plan the system interface accordingly.

Cotización Contacto

TAS5026APAG

TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI

The TAS5026APAG is a six-channel digital audio PWM processor from Texas Instruments, part of the PurePath Digital™ family. It integrates a modulator that converts digital audio data into PWM signals for driving external power stages, enabling high-efficiency Class-D amplification. The device operates from a 3V to 3.6V supply and is packaged in a 64-pin TQFP (10x10 mm). It interfaces via I2C and I2S, making it suitable for multi-channel audio systems. A digital audio PWM processor is a specialized DSP that converts digital audio streams (e.g., I2S) into pulse-width modulated signals. These PWM signals drive switching power stages, which then feed speakers through passive LC filters. This architecture achieves high efficiency (>90%) compared to linear amplifiers, reducing heat and power consumption in consumer and professional audio equipment. Key features include six independent channels, I2C control for configuration, and I2S input for digital audio. The device supports sample rates up to 192 kHz and provides advanced processing like volume control and dynamic range compression. Its 64-TQFP package offers a compact footprint for multi-channel designs. Technically, the TAS5026APAG employs a digital modulator with noise shaping to achieve high signal-to-noise ratio. It is designed to work with TI's PurePath Digital power stages, such as the TAS5121, which can deliver up to 100W into 4Ω speakers. The PWM output is optimized for minimal distortion and jitter. Typical applications include home theater receivers, AV receivers, soundbars, and active speakers. The device's multi-channel capability and digital interface make it ideal for surround sound systems. It is also used in automotive infotainment and professional audio equipment. When designing with the TAS5026APAG, ensure proper decoupling of the 3.3V supply and careful PCB layout to minimize noise. The I2C interface allows real-time control of volume and mute functions. Note that the device is now obsolete, so consider alternative parts for new designs.

Cotización Contacto

TAS5711PHPR

TAS5711PHPR - 20W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5711PHPR is a 20 W digital-input, open-loop Class-D audio power amplifier for stereo bridge-tied speakers, with 8 V to 26 V PVDD operation, 2.1-channel support, equalization, dynamic range control, and a 48-pin HTQFP package measuring 7 mm by 7 mm. Its digital signal path supports up to two discrete audio channels, while its integrated processing is designed for use with digital audio processors and MPEG decoders. A Class-D audio amplifier is a switching power amplifier that uses efficient transistor output stages to drive speakers through LC filter networks. It belongs to the broader class of audio amplifiers, power amplifiers, and analog and mixed-signal semiconductors. Compared with a linear amplifier, the TAS5711 family is intended to reduce power dissipation while delivering high output power for portable consumer-audio equipment, soundbars, compact televisions, and other embedded audio systems. The verified manufacturer data identifies the TAS5711 as a 20 W stereo amplifier operating from an 8 V to 26 V supply and reaching up to 90% efficiency. It provides digital audio input, programmable channel routing, AD and BD filter-mode support, EQ, DRC, and 2.1 mode. The verified datasheet search result also lists SNR of 106 dB, A-weighted, and describes bridge-tied-load operation for stereo speakers. The device accepts a wide range of input data and data rates through its serial digital interface. This makes the signal path suitable for systems where audio is already processed by a digital audio codec, decoder, application processor, or MPEG source. The internal programmable path can route two discrete channels and supports audio processing functions without requiring a separate analog preamplifier for those functions. Typical uses include stereo speaker drive, compact 2.1 speaker systems, consumer-audio equipment, soundbar amplification, and embedded audio products requiring efficient digital power amplification. The supplied PVDD range provides design flexibility for battery-powered and external-amplifier architectures, although actual speaker output depends on supply voltage, load impedance, thermal conditions, and filter design. Designers should follow the manufacturer datasheet for the exact pin functions, exposed-pad connection, LC filter values, thermal layout, digital interface timing, and power-supply decoupling. Because the part is a Class-D output stage, speaker outputs require the specified external filtering network. PCB placement should keep the power-loop area small, provide adequate copper for thermal dissipation, and route sensitive digital signals away from output switching nodes. This product record consolidates the verified manufacturer description, distributor identification, package information, and practical replacement-search results. It is intended to support design review, sourcing, and datasheet discovery; verify the current datasheet and part-status notices before committing a production design.

Cotización Contacto

TAS5827

TAS5827 - 47W Stereo Closed-Loop Class-D Amp | TI

The TAS5827 is a stereo high-performance, closed-loop Class-D audio amplifier with an integrated audio processor and support for up to 192-kHz audio. It delivers 47W per channel in BTL mode and is housed in a 32-pin VQFN (5x5 mm) package. The device features a digital input interface, making it ideal for modern digital audio systems. A Class-D amplifier is a switching amplifier that uses pulse-width modulation to achieve high efficiency, often exceeding 90%, compared to linear amplifiers. It is a key component in the audio signal chain, converting digital audio data into high-power analog output while minimizing heat dissipation. The TAS5827 integrates a closed-loop architecture, which improves linearity and reduces distortion, and an audio processor for advanced signal processing. Key features include a delay buffer up to 5ms in BTL mode or 10ms in PBTL mode, Class-H control for enhanced efficiency, and hardware control mode for selecting switching frequency, analog gain, BTL/PBTL mode, and cycle-by-cycle current limit threshold via pin configuration. The device also supports software control mode with classic BQs, 3-band DRC, AGL, and proprietary audio envelope tracking Class-H control. The TAS5827 uses a closed-loop feedback design that reduces power supply noise and improves audio quality. It integrates a high-performance audio processor capable of executing complex DSP algorithms, making it suitable for applications requiring EQ, DRC, and dynamic range compression. The device operates from a single supply and includes comprehensive protection features. Typical applications include smart speakers, soundbars, home theater systems, and active speakers. Its high efficiency and low power dissipation make it ideal for battery-powered and energy-conscious designs. The integrated audio processor reduces external component count, simplifying system design. When designing with the TAS5827, ensure proper PCB layout for thermal management and minimize parasitic inductance in the output stage. Use appropriate decoupling capacitors on the power supply pins and follow the recommended layout in the datasheet for optimal performance.

Cotización Contacto

TAS5827RHBR

TAS5827RHBR - 43W Stereo Digital Class-D Amp | Texas Instruments

The Texas Instruments TAS5827RHBR is a 43-W stereo, digital-input, closed-loop Class-D audio amplifier with integrated audio processing and Class-H control. Housed in a 32-pin VQFN (RHB) package measuring 5x5 mm, this device delivers high-efficiency amplification for a wide range of consumer and professional audio applications. It supports a supply voltage range of 4.5V to 26.4V and operates over a temperature range of -40°C to 85°C. A Class-D amplifier is a switching amplifier that uses pulse-width modulation (PWM) to achieve high efficiency, often exceeding 90%, compared to linear amplifiers. The TAS5827 integrates a closed-loop architecture that reduces distortion and improves power supply rejection, making it suitable for high-fidelity audio systems. The digital input interface accepts I2S, TDM, and other digital audio formats, simplifying system design by eliminating the need for external DACs. Key features include a 43-W output power per channel into 4-ohm loads, integrated audio processor with biquad filters and dynamic range compression, and Class-H control that optimizes power supply voltage for efficiency. The device also supports multiple switching frequencies and offers cycle-by-cycle current limit protection. Its closed-loop design ensures low THD+N and high signal-to-noise ratio, critical for premium audio performance. The TAS5827 uses a digital audio processing core that can be configured via I2C or hardware control mode. In hardware mode, switching frequency, analog gain, BTL/PBTL mode, and current limit threshold are set via pins, eliminating the need for software driver integration. This flexibility makes it easy to deploy in systems where firmware development is not desired. Typical applications include smart speakers, soundbars, home theater systems, and automotive audio. The high efficiency reduces heat dissipation, enabling compact designs without large heatsinks. The integrated audio processor allows designers to implement EQ, crossover, and dynamic range control without external DSP. When designing with this device, ensure proper PCB layout with adequate ground planes and decoupling capacitors near the power pins. The thermal pad must be soldered to a copper area for heat dissipation. Also, consider the input signal format and configure the device accordingly for optimal performance.

Cotización Contacto

TAS6754QDKQRQ1

TAS6754QDKQRQ1 - Automotive 4-Ch Class-D Audio Amp | TI

The TAS6754QDKQRQ1 is an automotive-grade, four-channel digital-input Class-D audio amplifier from Texas Instruments, offered in a 56-pin HSSOP (DKQ) package with exposed thermal pad. It implements 1L modulation, requiring only one inductor per BTL channel, and operates from a 19V supply with a 2MHz switching frequency. The device integrates current sense and real-time DC/AC load diagnostics for robust automotive speaker fault detection. A Class-D audio amplifier is a switching amplifier that converts a digital or analog audio signal into a high-frequency pulse-width modulated square wave, which is then low-pass filtered to reconstruct the audio. Class-D topologies achieve high efficiency (typically 80-90%) because the output transistors operate as switches, minimizing power dissipation compared to linear Class-AB amplifiers. In automotive audio systems, this efficiency reduces heat-sinking requirements and extends the available audio power from the vehicle's electrical system. Key features include four independent audio channels, 1L modulation that removes four inductors versus traditional designs, 2MHz switching for compact output filters, integrated current sense, and DC/AC real-time load diagnostics. The 19V rated supply is aligned with automotive audio power rails, and the AEC-Q100 Q1 suffix qualifies the device for automotive applications. The 56-pin HSSOP package supports surface-mount assembly with an exposed thermal pad for heat removal. 1L modulation is a proprietary Class-D scheme that uses a single inductor per bridge-tied-load channel, reducing system cost and size. The 2MHz switching rate moves the switching fundamental well above the audio band, simplifying the output low-pass filter and lowering out-of-band emissions. Integrated current sense and real-time load diagnostics monitor speaker health, enabling fault detection for shorts, opens, and degradation. The digital input accepts common automotive digital audio formats, eliminating the need for a separate DAC and analog front end. Typical applications include automotive infotainment head units, external amplifier modules, EV pedestrian warning (AVAS), telematics/eCall audio, rear-seat entertainment, and commercial-vehicle audio. The device is especially suited for designs where four channels of clean audio must be delivered from a 19V rail with minimal inductor count and integrated diagnostic coverage. When designing with the TAS6754QDKQRQ1, provide sufficient copper area on the exposed thermal pad and keep the output LC filter close to the device to minimize EMI. Verify the digital audio source timing and protocol against the datasheet before PCB layout.

Cotización Contacto

Subcategorías

Productos (32743)

T1042NSE7PQPB - QorIQ 4x e5500 1.4GHz MPU | NXP

T2080NSE8MQB - QorIQ T2 4-Core 1.2GHz e6500 MPU | NXP

T2080NXE8PTB - QorIQ 8x 1.5GHz 64-bit MPU, 4x10GE | NXP

T2081NSE8PTB - QorIQ T2 4C 1.5GHz 896-FCPBGA | NXP Semiconductors

T2081NSE8TTB - QorIQ T2 64-bit 8-thread 1.8GHz SoC | NXP

T2081NXE8MQB - QorIQ T2 8x 1.2GHz MPU, 2x10GE, Crypto | NXP

T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP

T2081NXN8MQB - QorIQ 4-Core 1.2GHz MPU BGA | NXP

T4080NSE7PQB - QorIQ T4 8-Core 1.5GHz Power Arch MPU | NXP

T4080NSE7QTB - QorIQ T4 8-Core 1.8GHz PowerPC MPU | NXP

T4080NXE7PQB - QorIQ T4080 4-Core 1.8GHz PowerPC MPU | NXP

T4160NSE7QTB - QorIQ T4 8-Core 1.8GHz PowerPC SoC | NXP

T4160NSE7TTB - QorIQ T4 8-Core 1.8GHz Power Arch MPU | NXP

T4160NSN7QTB - QorIQ 16x 1.67GHz SoC, 2x10GE, FCBGA-1932 | NXP

T4160NSN7TTB - QorIQ 16-Core 1.8GHz Power Arch MPU | NXP

T4160NXN7PQB - QorIQ 16-Core 1.5GHz SoC | NXP Semiconductors

T4240NSE7PQB - 24-Core QorIQ Power Arch SoC | NXP

T4240NSN7TTB - QorIQ T4 24x 1.8GHz Power Arch MPU | NXP

TAS5001PFBRG4 - Digital Audio PWM Processor | TI | 48-TQFP

TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI

TAS5711PHPR - 20W Stereo Class-D Amplifier | Texas Instruments

TAS5827 - 47W Stereo Closed-Loop Class-D Amp | TI

TAS5827RHBR - 43W Stereo Digital Class-D Amp | Texas Instruments

TAS6754QDKQRQ1 - Automotive 4-Ch Class-D Audio Amp | TI