ADM3491AN-1 vs ADM3491AN Comparación
Comparación detallada lado a lado de ADM3491AN-1 por Analog Devices y ADM3491AN por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM3491AN-1 - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices
ADM3491AN-1 ✓ ActivoComparación de especificaciones
| Parámetro | ADM3491AN-1 | ADM3491AN |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Low-power differential RS-485/RS-422 line transceiver | — |
| Tensión de alimentación | 3.3 V | 3.3 V ± 0.3 V |
| Maximum Data Rate | 20 Mbps | — |
| Low-Power Consumption | 840 uA | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Communication Mode | Full duplex | — |
| Driver Architecture | Differential line driver | — |
| Receiver Architecture | Differential line receiver | — |
| Power-Down Feature | Yes, shutdown mode | — |
| Encapsulado | 14-lead SOIC | 12-pin PDIP |
| Tipo de montaje | Surface mount | Through-hole |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Enable Control | [DATA_NEEDED: driver enable polarity and timing] | — |
| Receiver Enable Control | [DATA_NEEDED: receiver enable polarity and timing] | — |
| Common-Mode Rejection | [DATA_NEEDED: receiver common-mode rejection] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum cable length] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Velocidad de datos | — | 20 Mbps |
| Corriente de alimentación | — | 840 µA |
| Corriente de apagado | — | 2 nA |
| Receiver Input Impedance | — | 19 kΩ |
| Maximum Transceivers on Bus | — | 50 transceivers |
| Duplex Mode | — | Full duplex |
| Interface Standards | — | EIA RS-485 and EIA RS-422 |
| Logic Compatibility | — | Interoperable with 5 V logic |
| Fault Protection | — | Short-circuit protection and thermal shutdown |
| Transient Immunity | — | IEC 1000-4-4 above 1 kV |
| Transmitter Skew | — | 8 ns |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |