ADM3491AN-1 vs ADM3491AN Comparação
Comparação detalhada lado a lado de ADM3491AN-1 por Analog Devices e ADM3491AN por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM3491AN-1 - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices
ADM3491AN-1 ✓ AtivoComparação de especificações
| Parâmetro | ADM3491AN-1 | ADM3491AN |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Low-power differential RS-485/RS-422 line transceiver | — |
| Tensão de alimentação | 3.3 V | 3.3 V ± 0.3 V |
| Maximum Data Rate | 20 Mbps | — |
| Low-Power Consumption | 840 uA | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| Communication Mode | Full duplex | — |
| Driver Architecture | Differential line driver | — |
| Receiver Architecture | Differential line receiver | — |
| Power-Down Feature | Yes, shutdown mode | — |
| Encapsulamento | 14-lead SOIC | 12-pin PDIP |
| Tipo de montagem | Surface mount | Through-hole |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Enable Control | [DATA_NEEDED: driver enable polarity and timing] | — |
| Receiver Enable Control | [DATA_NEEDED: receiver enable polarity and timing] | — |
| Common-Mode Rejection | [DATA_NEEDED: receiver common-mode rejection] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum cable length] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Taxa de dados | — | 20 Mbps |
| Corrente de alimentação | — | 840 µA |
| Corrente de desligamento | — | 2 nA |
| Receiver Input Impedance | — | 19 kΩ |
| Maximum Transceivers on Bus | — | 50 transceivers |
| Duplex Mode | — | Full duplex |
| Interface Standards | — | EIA RS-485 and EIA RS-422 |
| Logic Compatibility | — | Interoperable with 5 V logic |
| Fault Protection | — | Short-circuit protection and thermal shutdown |
| Transient Immunity | — | IEC 1000-4-4 above 1 kV |
| Transmitter Skew | — | 8 ns |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |