BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 Comparación
Comparación detallada lado a lado de BTG7003A1EPWXUMA2 por Infineon y BTG70902EPLXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ ActivoInfineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,20 | $0,99 |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | — |
| Functional Safety | ISO 26262 compliant | — |
| Encapsulado | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40C to +150C (TJ) | — |
| Estado RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Función | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Configuración de salida | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Limitación de corriente | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Temperatura de unión de funcionamiento | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |