BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 비교

다음의 상세 나란히 비교: BTG7003A1EPWXUMA2 제조: Infineon 및 BTG70902EPLXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 BTG7003A1EPWXUMA2 BTG70902EPLXUMA1
브랜드 Infineon Infineon
카테고리 Power MOSFET Drivers Power MOSFET Drivers
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $2.20 $0.99
Switch Type High-Side Power Switch —
Number of Channels 1 1
Configuration 1:1 N-Channel —
Maximum Continuous Load Current 15.7 A —
Operating Voltage Range 6 V to 18 V [DATA_NEEDED: Vbb operating range min/max]
Load Dump Tolerance 40 V —
Idle Mode Quiescent Current 50 µA —
On-Resistance R_DS(on) 10 mΩ (typ) —
Control Input Active High —
Wire Protection Integrated I²t —
Functional Safety ISO 26262 compliant —
패키지 PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14 (exposed pad)
실장 유형 Surface Mount Surface Mount
동작 온도 -40C to +150C (TJ) —
RoHS 상태 Compliant Compliant
Product Family — PROFET+2 12V
기능 — Smart High-Side Power Switch
Input-to-Output Ratio — 1:1
출력 구성 — N-Channel High-Side
Continuous Load Current — 2 A
Nominal Operating Voltage — 12 V (automotive bus)
On-State Resistance (Ron) — [DATA_NEEDED: Rdson typ/max in mohm]
전류 제한 — Fixed (value not specified in retrieved data)
Protection Features — Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery
Diagnostic Output — DEN pin (current sense / fault flag)
Enable Input — IN pin (active-high)
Channel Select — DSEL pin
Slew Rate Control — Yes (internal, for EMI)
동작 접합 온도 — -40 C to +150 C
Automotive Qualification — AEC-Q100 (PROFET+2 family targeted at automotive)
MSL 레벨 — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청