BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 比較

詳細な並列比較: BTG7003A1EPWXUMA2 メーカー: Infineon および BTG70902EPLXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ BTG7003A1EPWXUMA2 BTG70902EPLXUMA1
ブランド Infineon Infineon
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $2.20 $0.99
Switch Type High-Side Power Switch —
Number of Channels 1 1
Configuration 1:1 N-Channel —
Maximum Continuous Load Current 15.7 A —
Operating Voltage Range 6 V to 18 V [DATA_NEEDED: Vbb operating range min/max]
Load Dump Tolerance 40 V —
Idle Mode Quiescent Current 50 µA —
On-Resistance R_DS(on) 10 mΩ (typ) —
Control Input Active High —
Wire Protection Integrated I²t —
Functional Safety ISO 26262 compliant —
パッケージ PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14 (exposed pad)
実装タイプ Surface Mount Surface Mount
動作温度 -40C to +150C (TJ) —
RoHS ステータス Compliant Compliant
Product Family — PROFET+2 12V
機能 — Smart High-Side Power Switch
Input-to-Output Ratio — 1:1
出力構成 — N-Channel High-Side
Continuous Load Current — 2 A
Nominal Operating Voltage — 12 V (automotive bus)
On-State Resistance (Ron) — [DATA_NEEDED: Rdson typ/max in mohm]
電流制限 — Fixed (value not specified in retrieved data)
Protection Features — Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery
Diagnostic Output — DEN pin (current sense / fault flag)
Enable Input — IN pin (active-high)
Channel Select — DSEL pin
Slew Rate Control — Yes (internal, for EMI)
動作接合温度 — -40 C to +150 C
Automotive Qualification — AEC-Q100 (PROFET+2 family targeted at automotive)
MSLレベル — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼