BTH62001ENAXUMA1 vs BTS70402EPGXUMA1 Comparación
Comparación detallada lado a lado de BTH62001ENAXUMA1 por Infineon y BTS70402EPGXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ Activo
Comparación de especificaciones
| Parámetro | BTH62001ENAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,05 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET™ + 48V | — |
| Función | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Canales | 1 | — |
| On-State Resistance (RDS(on) @ 25 °C) | 200 mΩ (typical) | — |
| Operating Voltage Range | 8 V to 60 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Continuous Load Current | 1.7 A | — |
| Configuración de salida | High-Side | High-side, N-channel MOSFET |
| Input Type | Active-High / Active-Low | — |
| Current Sense | Analog proportional output | — |
| Protection Features | Over-current, over-temperature, over-voltage, load-dump, reverse battery | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| Functional Safety | ISO 26262-ready | — |
| Encapsulado | PG-TDSO-8-31 | PG-TSDSO-14 (exposed thermal pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Estado RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |