BTH62001ENAXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTH62001ENAXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTH62001ENAXUMA1 - 48V 200mΩ 1.7A Smart High-Side Switch | Infineon
BTH62001ENAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTH62001ENAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,05 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET™ + 48V | — |
| Fonction | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Canaux | 1 | — |
| On-State Resistance (RDS(on) @ 25 °C) | 200 mΩ (typical) | — |
| Operating Voltage Range | 8 V to 60 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Continuous Load Current | 1.7 A | — |
| Configuration de sortie | High-Side | High-side, N-channel MOSFET |
| Input Type | Active-High / Active-Low | — |
| Current Sense | Analog proportional output | — |
| Protection Features | Over-current, over-temperature, over-voltage, load-dump, reverse battery | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| Functional Safety | ISO 26262-ready | — |
| Boîtier | PG-TDSO-8-31 | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Statut RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |