BTH62001ENAXUMA1 vs BTS70402EPGXUMA1 比較
詳細な並列比較: BTH62001ENAXUMA1 メーカー: Infineon および BTS70402EPGXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | BTH62001ENAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.05 | $3.18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET™ + 48V | — |
| 機能 | Smart High-Side Power Switch | Smart High-Side Power Switch |
| チャネル数 | 1 | — |
| On-State Resistance (RDS(on) @ 25 °C) | 200 mΩ (typical) | — |
| Operating Voltage Range | 8 V to 60 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Continuous Load Current | 1.7 A | — |
| 出力構成 | High-Side | High-side, N-channel MOSFET |
| Input Type | Active-High / Active-Low | — |
| Current Sense | Analog proportional output | — |
| Protection Features | Over-current, over-temperature, over-voltage, load-dump, reverse battery | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| Functional Safety | ISO 26262-ready | — |
| パッケージ | PG-TDSO-8-31 | PG-TSDSO-14 (exposed thermal pad) |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度範囲 | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| RoHS ステータス | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |