INA114AU vs INA129U Comparación
Comparación detallada lado a lado de INA114AU por Texas Instruments y INA129U por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | INA114AU | INA129U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Single-amplifier precision instrumentation amplifier | — |
| Gain-Bandwidth Product | 1 MHz | 1.3 MHz |
| Input Noise | 11 nV/√Hz | — |
| Maximum Offset Voltage | 50 µV | 50 µV |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Maximum Input Bias Current | 2 nA | 5 nA |
| Minimum Common-Mode Rejection | 115 dB | 120 dB |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Maximum Quiescent Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Slew Rate | 0.06 V/µs | — |
| Rango de temperatura de funcionamiento | -40°C to +85°C | -40°C to +85°C |
| Encapsulado | 16-pin SOIC, 3.9 mm wide | 8-pin SOIC |
| Tipo de montaje | Surface mount | — |
| Internal Architecture | Three-op-amp instrumentation amplifier | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision, low-power instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±2.25 V to ±18 V |
| Maximum Supply | — | ±18 V |
| Bandwidth at G = 100 | — | 200 kHz |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Input Protection | — | ±40 V differential inputs |
| Gain-Setting Resistor | — | 49.4 kΩ reference resistor |
| Circuit Count | — | 1 amplifier |
| Corriente en reposo | — | [DATA_NEEDED: low quiescent current value] |
| Estado RoHS | — | [DATA_NEEDED: RoHS status] |