INA114AU vs INA129U 比較
詳細並排比較 INA114AU 由 Texas Instruments 與 INA129U 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | INA114AU | INA129U |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Single-amplifier precision instrumentation amplifier | — |
| Gain-Bandwidth Product | 1 MHz | 1.3 MHz |
| Input Noise | 11 nV/√Hz | — |
| Maximum Offset Voltage | 50 µV | 50 µV |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Maximum Input Bias Current | 2 nA | 5 nA |
| Minimum Common-Mode Rejection | 115 dB | 120 dB |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Maximum Quiescent Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Slew Rate | 0.06 V/µs | — |
| 工作溫度範圍 | -40°C to +85°C | -40°C to +85°C |
| 封裝 | 16-pin SOIC, 3.9 mm wide | 8-pin SOIC |
| 安裝類型 | Surface mount | — |
| Internal Architecture | Three-op-amp instrumentation amplifier | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision, low-power instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±2.25 V to ±18 V |
| Maximum Supply | — | ±18 V |
| Bandwidth at G = 100 | — | 200 kHz |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Input Protection | — | ±40 V differential inputs |
| Gain-Setting Resistor | — | 49.4 kΩ reference resistor |
| Circuit Count | — | 1 amplifier |
| 靜態電流 | — | [DATA_NEEDED: low quiescent current value] |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |