INA114AU vs INA129U Comparaison
Comparaison détaillée côte à côte de INA114AU par Texas Instruments et INA129U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA114AU | INA129U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single-amplifier precision instrumentation amplifier | — |
| Gain-Bandwidth Product | 1 MHz | 1.3 MHz |
| Input Noise | 11 nV/√Hz | — |
| Maximum Offset Voltage | 50 µV | 50 µV |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Maximum Input Bias Current | 2 nA | 5 nA |
| Minimum Common-Mode Rejection | 115 dB | 120 dB |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Maximum Quiescent Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Slew Rate | 0.06 V/µs | — |
| Plage de température de fonctionnement | -40°C to +85°C | -40°C to +85°C |
| Boîtier | 16-pin SOIC, 3.9 mm wide | 8-pin SOIC |
| Type de montage | Surface mount | — |
| Internal Architecture | Three-op-amp instrumentation amplifier | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision, low-power instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±2.25 V to ±18 V |
| Maximum Supply | — | ±18 V |
| Bandwidth at G = 100 | — | 200 kHz |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Input Protection | — | ±40 V differential inputs |
| Gain-Setting Resistor | — | 49.4 kΩ reference resistor |
| Circuit Count | — | 1 amplifier |
| Courant de repos | — | [DATA_NEEDED: low quiescent current value] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |