onsemi

LM2901NG - 3-36 V Quad Comparator for Level Detection | onsemi

N.º de pieza: LM2901NG ✓ Activo
3 V to 36 V Vdss 14-pin PDIP Package
MOQ: 1 |

LM2901NG Descripción general

The onsemi LM2901NG is a single-supply quad differential comparator with a 3 V to 36 V operating range, four open-collector outputs, and a 14-pin PDIP package. It is designed for level detection, low-level sensing, and memory applications, with an operating temperature range of -40°C to 105°C. Each of the four independent channels compares an inverting input with a non-inverting input and supports TTL, CMOS, and open-collector interfacing.

A quad comparator is a multi-channel analog semiconductor that decides whether one input voltage is above or below another reference voltage. The LM2901NG belongs to the comparator hierarchy, where a comparator is a signal-conditioning IC used to produce a digital, logic-level decision from two analog voltages. Its four independent channels allow a compact circuit to monitor several thresholds, levels, or memory-control signals without requiring four separate comparator packages.

The principal features include a 3 V to 36 V supply range, single-supply operation, and a low output saturation voltage of 130 mV at 4 mA. The common-mode input range includes ground, making the device practical for single-supply systems in which signals remain near the lower rail. ESD input clamps improve reliability without changing normal comparator operation, while the open-collector outputs permit wired logic, pull-up resistor selection, and compatibility with multiple logic families.

Within the LM2901 family, the NG suffix identifies the onsemi 14-pin PDIP configuration. The device provides four separate comparator channels rather than a single comparison function, reducing package count when several independent decisions are required. Its open-collector outputs require an external pull-up when the output must rise to a defined positive voltage. Designers should account for the pull-up value, output leakage, input bias current, and propagation delay when driving long interconnects or switching high-capacitance nodes.

Typical applications include industrial sensor threshold detection, battery-powered equipment, memory-control logic, window or level comparators, and general-purpose TTL or CMOS interfacing. Because the operating range extends to 36 V, the LM2901NG can be used in higher-voltage industrial systems when every input remains inside its permitted common-mode range. The -40°C to 105°C temperature range supports both commercial and extended industrial environments.

For reliable operation, use the pin-description table and typical application information in the onsemi datasheet when assigning input polarities and output pull-ups. Keep sensitive analog input traces away from high-current switching nodes, provide a stable local supply connection, and select a pull-up resistor that balances rise time against output-driver loading. Input and output filtering may be required when the comparator is used near switching regulators or fast digital signals.

This product page combines the manufacturer specifications with package, application, comparison, and design guidance for engineers evaluating LM2901NG. It also identifies qualified same-package alternatives and highlights the electrical and application trade-offs that should be checked before a replacement is approved for an existing PCB.

Alternativas directas para LM2901NG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM2901NG (mismo factor de forma y huella) — difiere en Comparator Type, Mounting Type, Package, Output Type, Supply Configuration.

Texas Instruments
Comparator Type: 4-channel differential analog comparator
Mounting Type: Surface Mount
Package: 14-pin SOIC
Comparar con LM2901NG →
Texas Instruments
Mounting Type: Through hole
Package: 14-pin DIP
Supply Configuration: Single or split supply
Comparar con LM2901NG →
Texas Instruments
Package: 14-PDIP, 0.300 inch pitch, 7.62 mm
Comparar con LM2901NG →
Texas Instruments
Comparator Type: General-purpose differential voltage comparator
Mounting Type: Through-hole insertion
Package: 14-pin PDIP, 0.3 inch width
Texas Instruments
Comparator Type: Low-power, low-offset differential voltage comparator
Output Type: Open-collector
Supply Configuration: Single supply or split supply
onsemi
Comparator Type: General-purpose differential analog comparator
Output Type: Open-collector CMOS/TTL-compatible output
Supply Configuration: Single or split supply
Comparar con LM2901NG →

LM2901SNG

✅ Sustitución directa
📦 14-PDIP
Same quad-comparator family, 3 V to 36 V supply class, and 14-PDIP package; ordering-temperature and qualification details should be confirmed from the onsemi ordering table.

📋 Alternativa de referencia (no en el catálogo)

LM2901NG4

✅ Sustitución directa
Texas Instruments
📦 14-PDIP
Quad differential comparator · 4 channels · Open collector · 2 V to 30 V · ±1 V to ±15 V · -40 °C to 125 °C · 14-PDIP, 0.300 inch pitch, 7.62 mm · TTL, MOS, and CMOS compatible

Consulte el precio

Ver hoja de datos →

LM2901N

✅ Sustitución directa
Texas Instruments
📦 14-PDIP
Quad differential comparator · 4 channels · Single or split supply · 36 V · 25 nA typical · ±5.0 nA typical · 800 µA typical · Open collector

Consulte el precio

Ver hoja de datos →

LM2901M

✅ Sustitución directa
Texas Instruments
📦 14-PDIP
4-channel differential analog comparator · 4 channels · 2 V to 36 V · Approximately ±1 V to ±18 V · 1.3 µs · Open-collector · 800 µA · 25 nA

Consulte el precio

Ver hoja de datos →

LM2901A

✅ Sustitución directa
📦 14-PDIP
Same single- or dual-supply quad-comparator family with ground-inclusive common-mode input capability; electrical limits and exact suffix must be compared before production use.

📋 Alternativa de referencia (no en el catálogo)

LM2901NG Valores máximos y características eléctricas

Comparator Type Quad differential comparator
Number of Channels 4 channels
Supply Voltage Range 3 V to 36 V
Supply Configuration Single supply
Tipo de salida Open collector
Logic Compatibility TTL and CMOS
Output Saturation Voltage 130 mV at 4 mA
Common-Mode Input Range Includes ground
Rango de temperatura de funcionamiento -40°C to 105°C
Input ESD Protection ESD clamps on inputs
Package Type 14-pin PDIP
Tipo de montaje Through-hole
Manufacturer onsemi
Device Classification Standard general-purpose comparator
Typical Applications Level detection, low-level sensing, and memory applications

Configuración de pines de LM2901NG

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 OUT1 — Comparator 1 open-collector output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 non-inverting input
Pin 4 GND — Ground connection
Pin 5 IN2+ — Comparator 2 non-inverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 open-collector output
Pin 8 OUT3 — Comparator 3 open-collector output
Pin 9 IN3- — Comparator 3 inverting input
Pin 10 IN3+ — Comparator 3 non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 IN4+ — Comparator 4 non-inverting input
Pin 13 IN4- — Comparator 4 inverting input
Pin 14 OUT4 — Comparator 4 open-collector output

Aplicaciones típicas

LM2901NG es adecuado para 6 aplicacións: Industrial Sensor Threshold Detection, Battery-Powered Monitoring Circuit, Memory Control and Logic Interface, TTL and CMOS Logic Interfacing, Automotive and Robust Control Systems, General-Purpose Signal Conditioning.

🏭

Industrial Sensor Threshold Detection

The onsemi LM2901NG is well suited to industrial threshold detection because its four independent channels can compare multiple sensor signals with reference voltages while operating from a 3 V to 36 V supply. The common-mode input range includes ground, which helps when a sensor output is referenced to the lower supply rail. Each open-collector output can drive a pull-up and alarm or logic input. The 130 mV saturation voltage at 4 mA provides a low output level for digital interfacing. Designers should verify that sensor voltages remain within the permitted input range, account for input bias current, and place the comparator close enough to sensitive analog nodes to reduce pickup from industrial switching equipment.

⚡

Battery-Powered Monitoring Circuit

LM2901NG can implement multiple low-level monitoring functions in battery-operated equipment because it combines four comparison channels with a supply range starting at 3 V. A battery system can use the channels to detect a falling supply level, compare a control voltage with a threshold, or supervise two independent signals. The common-mode input range including ground supports measurements near the lower rail. Because the outputs are open collector, pull-up resistors can define the logic-high voltage independently of the comparator's supply. Keep the pull-up load within the output sink-current rating and calculate its maximum value from battery current, output leakage, and the capacitance of the connected logic input.

🖥️

Memory Control and Logic Interface

The LM2901NG's four differential channels are useful for memory-control logic where several voltage thresholds must be translated into hardware control signals. Each channel can compare a data or control voltage against a reference and provide an open-collector result suitable for wired logic. Its ground-inclusive common-mode range is helpful in systems whose signals are referenced close to 0 V, while the 3 V to 36 V supply range accommodates different logic environments. Timing margins should be checked against the memory interface, and pull-up resistors should be selected to provide adequate rise time without excessive supply current. Input overshoot and ringing should also be evaluated at board level.

🔧

TTL and CMOS Logic Interfacing

LM2901NG provides four open-collector outputs that can interface with TTL or CMOS logic when an appropriate pull-up network is used. A pull-up to the receiving logic rail creates a valid high level, while the comparator sinks the node low. The specified 130 mV saturation voltage at 4 mA indicates the low-level behavior needed by many digital systems. Choose the pull-up resistor using the load current, input capacitance, output leakage, and allowable transition rate. The four-channel package reduces component count in boards requiring several independent digital decisions, although each open-collector output must be evaluated separately for fan-out and rise-time requirements.

🚗

Automotive and Robust Control Systems

The LM2901NG's -40°C to 105°C operating range and 3 V to 36 V supply capability make it a candidate for robust control and monitoring circuits spanning wide environmental conditions. Four channels can supervise several vehicle, actuator, or machine-control thresholds without using four separate IC packages. The ground-inclusive common-mode range supports single-supply sensing architectures, while open-collector outputs permit flexible pull-up arrangements. Automotive production use requires separate confirmation of the exact suffix, qualification status, quality documentation, and any customer-specific requirements. Signal conditioning should prevent transient voltages and ground offsets from pushing an input outside the limits published by the manufacturer.

⚙️

General-Purpose Signal Conditioning

LM2901NG is useful as a general-purpose signal conditioner for analog nodes that must become deterministic logic decisions. A designer can compare a conditioned sensor output, rectified waveform, or reference voltage against an adjustable threshold and use the open-collector result to drive an indicator, relay-control stage, or digital input. Its four independent channels allow several measurements to be handled in one through-hole package. For best results, minimize input-node capacitance, keep comparator traces away from switching-current paths, and verify propagation delay against the timing requirement. The pull-up resistor should create a clean rising edge without causing excessive overshoot when the open-collector transistor turns off.

What is the operating voltage of LM2901NG?
The LM2901NG operates from a 3 V to 36 V single supply. According to the onsemi LM2901 datasheet, this range supports low-voltage logic systems and higher-voltage industrial applications. The common-mode input range includes ground, but every input voltage must still remain within the comparator's permitted common-mode limits. Designers should use the datasheet input limits when operating near the upper supply rail.
What is LM2901NG and how many comparators does it contain?
The LM2901NG is a quad differential comparator containing four independent comparison channels in a 14-pin PDIP package. According to the onsemi datasheet, each channel has an inverting input, a non-inverting input, and an open-collector output. It is intended for level detection, low-level sensing, memory applications, and direct TTL or CMOS interfacing.
What is the output type of LM2901NG?
The LM2901NG uses open-collector outputs on all four channels. According to the onsemi datasheet, the output can sink current from a pull-up network and has a specified low-level saturation voltage of 130 mV at 4 mA. An external pull-up resistor is therefore required when the output must actively rise to a defined positive logic voltage.
Where can I download the LM2901NG datasheet PDF?
The official onsemi LM2901 datasheet is available from the manufacturer's datasheet page linked on this product page. It is the best source for the complete pin-description table, electrical characteristics, input common-mode limits, output-leakage limits, timing information, and typical application circuits for the LM2901NG.
Where can I find the LM2901NG pinout?
The LM2901NG pinout is defined in the onsemi datasheet's pin-description table and package drawing. The device uses a 14-pin PDIP configuration with four differential comparator channels. Assign the pins using the manufacturer diagram rather than relying on a generic quad-comparator drawing, because different manufacturers can use different package pin arrangements.
LM2901NG vs LM2901SNG: which one should I choose?
LM2901NG and LM2901SNG are both onsemi LM2901-family quad comparators, but the suffix identifies different ordering variants. The LM2901NG is the 14-pin PDIP configuration identified on distributor listings, while the LM2901SNG listing also specifies a 14-pin PDIP. Compare the complete onsemi ordering table for temperature grade, packaging, and qualification before treating one as a production substitute.
Can LM2901NG4 replace LM2901NG?
LM2901NG4 may be considered only after confirming package pins, electrical limits, temperature range, and production requirements against both manufacturers' datasheets. Both part names denote a 14-pin PDIP quad comparator, and the LM2901 family is commonly described as pin-compatible across manufacturers. A PCB-engineering review is still required because wording and qualification details can differ by manufacturer.
When should I choose LM2901NG over a single comparator?
Choose the LM2901NG when the design needs four independent threshold decisions rather than one. Its four channels can implement multiple level detectors, monitor separate sensor signals, or support memory-control functions in one package. The trade-off is a 14-pin through-hole package and four shared supply pins, so a quad device is less efficient when only one comparator channel is required.
Is LM2901NG suitable for industrial level detection?
The LM2901NG is suitable for many industrial level-detection circuits because it supports a 3 V to 36 V supply and an operating temperature range of -40°C to 105°C. Its common-mode range includes ground, and its open-collector output supports pull-up-based interfacing. Sensor signals must remain inside the datasheet's allowed input range, and industrial qualification details should be checked separately.
What can replace LM2901NG?
The LM2901SNG and LM2901NG4 are direct candidates because their listings identify the same 14-pin PDIP quad-comparator format and LM2901-family function. A valid replacement must also match pinout, supply range, input common-mode limits, output-current capability, timing, and temperature grade. Use the onsemi LM2901 datasheet and the candidate manufacturer's datasheet for the final cross-reference.
What is the best TI equivalent for LM2901NG?
The TI LM2901NG4 is the closest named candidate in the LM2901 cross-reference family because its listing identifies a 14-pin PDIP, open-collector quad comparator. The TI LM2901 family is also described as a drop-in replacement for related LM239, LM339, and LM2901 versions. Production approval should confirm exact pin assignments, electrical characteristics, and qualification requirements.
How do I use an LM2901NG open-collector output with CMOS?
Connect the LM2901NG open-collector output to a pull-up resistor referenced to the receiving logic supply, then route that pulled-up node to the CMOS input. The comparator sinks the output low, while the resistor establishes the high state. Choose the resistor using the comparator's output leakage, sink-current capability, input capacitance, and required switching speed.
Does LM2901NG need an external pull-up resistor?
Yes, the LM2901NG requires an external pull-up whenever an output must reach a defined positive logic-high voltage. The open-collector transistor can pull the node toward ground but cannot actively drive it high. The pull-up value determines the rise time and the current drawn during a low output, so it should be calculated from the load capacitance and sink-current specification.
Where can I buy LM2901NG online?
Use the Request a Quote form on this page to request LM2901NG pricing, current availability, lead time, and minimum order quantity. The form is the appropriate purchasing path for this catalog part and avoids publishing a potentially stale commercial figure. Confirm the exact 14-pin PDIP ordering configuration and requested quantity when submitting the request.
What is the price of LM2901NG?
The current commercial price for LM2901NG should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, packaging, market conditions, and shipment requirements. The request form allows the quantity, target delivery location, and any required traceability or quality documentation to be included with the quotation.
What is the lead time for LM2901NG?
Request the current lead time through the Request a Quote form on this page, stating the required quantity and delivery schedule. Lead time can vary with inventory position, order volume, and packaging requirements. For production planning, ask for the earliest delivery, the committed quantity, and any scheduled-break or obsolete-material notification in writing.
What are the key specifications of LM2901NG that engineers should know?
The key LM2901NG specifications are four independent channels, a 3 V to 36 V single-supply range, open-collector outputs, TTL and CMOS compatibility, and a -40°C to 105°C operating range. The onsemi datasheet specifies a 130 mV output saturation voltage at 4 mA and states that the common-mode input range includes ground. The package is 14-pin PDIP.
Is LM2901NG currently in stock?
Current LM2901NG availability should be confirmed through the Request a Quote form on this page. Include the required quantity, date code preference, and acceptable substitution policy in the request. For an active production program, request a written availability and lead-time statement rather than relying on a search result that may not reflect current inventory.
Does LM2901NG include input ESD protection?
Yes, the LM2901NG includes ESD clamps on its inputs. According to the onsemi product description, these input clamps increase reliability without affecting normal device operation. ESD protection does not eliminate the need for normal handling procedures or external protection when exposed to severe transients beyond the device's specified limits.

Datos de referencia de ingeniería para LM2901NG — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the onsemi LM2901NG when a design needs four independent level comparisons, single-supply operation, and open-collector outputs in a 14-pin PDIP package. Its 3 V to 36 V supply range and ground-inclusive common-mode input capability make it suitable for industrial threshold detection, low-level sensing, memory control, and TTL or CMOS interfacing. LM2901SNG is the closest same-manufacturer option when its ordering and qualification attributes better match the project. LM2901NG4 from Texas Instruments can be evaluated when a second-manufacturer source is desirable, provided pinout and electrical limits are checked against the onsemi datasheet. LM2901M and LM2901A may also be considered within the LM2901 family after confirming the exact suffix, temperature grade, and qualification. A single comparator is more efficient when only one threshold decision is needed. Regardless of the alternative, verify input common-mode limits, propagation delay, output leakage, sink current, pull-up behavior, and temperature requirements before approving a substitution.

Comparación con alternativas

Parámetro Este producto LM2901SNG LM2901NG4 LM2901N LM2901M LM2901A
Brand onsemi onsemi Texas Instruments Texas Instruments onsemi 3PEAK
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Comparator Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels

Diferenciadores clave

  • Four independent threshold channels in one 14-pin package (frente a LM2901N)
  • Ground-inclusive common-mode operation for single-supply designs (frente a LM2901A)
  • Specified low output saturation for digital interfacing (frente a LM2901NG4)
  • Wide supply capability for industrial monitoring (frente a LM2901SNG)

Notas de diseño

Route each inverting and non-inverting input as a short, quiet analog trace, especially where the comparator detects small voltage differences. Keep these paths away from power-switching nodes, relay contacts, high-current return paths, and high-impedance sensor outputs. Place the device near the protected signal and connect its ground pin to the quiet analog ground reference used by the signal source.

Design every open-collector output with an external pull-up connected to the logic rail that defines the required high voltage. Estimate the maximum pull-up current as the logic-high voltage divided by the pull-up resistance, and verify that it remains within the output sink-current capability. A smaller resistor reduces rise time but increases current; a larger resistor lowers power consumption but can slow transitions and increase susceptibility to leakage and noise.

Do not assume that the entire 3 V to 36 V supply range is also a valid common-mode input range. Confirm both positive and negative input limits against the onsemi datasheet, including transient excursions and offsets caused by source impedance. For a single-supply design, keep the non-inverting reference near the lower end of the allowed range and account for input bias current when generating that reference with a high-value divider.

If the comparator drives a cable, long trace, or high-capacitance node, calculate the pull-up-induced rise time using the resistor and total capacitance. Excessive capacitance can slow the rising edge and create ringing when the open-collector output switches off. Use a staged driver, lower pull-up resistance within the sink-current limit, or a Schmitt-trigger input stage when slow edges would cause multiple transitions.

The LM2901NG is a comparator rather than a power regulator, but its supply dissipation still depends on output duty cycle and pull-up current. Estimated: with a 5 V pull-up and a 4 mA low-state sink current, the output transistor dissipates approximately 20 mW while low. Confirm the actual output duty cycle, ambient temperature, and PCB copper area against the manufacturer's maximum ratings.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for the exact LM2901NG ordering code. Request current compliance and quality documentation through the Request a Quote form.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

lm2901n datasheet lm2901 datasheet lm2901 spice model lm2901 smd lm2901 pdf LM2901NG datasheet pdf LM2901NG pinout LM2901NG equivalent LM2901NG replacement LM2901NG vs LM2901SNG onsemi LM2901NG LM2901NG price

Componentes & términos relacionados

onsemi LM2901NG LM2901SNG LM2901NG4 LM2901N LM2901M LM2901A Texas Instruments 3PEAK quad comparator differential comparator analog comparator signal-conditioning IC open-collector output single-supply operation common-mode input voltage output saturation voltage level detection low-level sensing memory control TTL logic CMOS logic 14-pin PDIP DIP package through-hole package ESD input clamps -40°C to 105°C
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ