onsemi

LM2901VNG - Quad 36V Open-Collector Comparator | onsemi

N.º de pieza: LM2901VNG ✓ Activo
3 V to 36 V Vdss 0.25 µA Id 14-pin PDIP Package
MOQ: 1 |

LM2901VNG Descripción general

onsemi LM2901VNG is a general-purpose quad differential comparator containing four independent voltage comparators in a 14-pin PDIP package. Each comparator supports single-supply operation from 3 V to 36 V or dual-supply operation from ±1.5 V to ±18 V, while its open-collector output supports wired-AND operation and compatibility with TTL, CMOS, and MOS logic levels. The device is intended for level detection, low-level sensing, memory applications, consumer equipment, automotive electronics, and industrial control systems.

A comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. Within the broader semiconductor hierarchy, the LM2901VNG belongs to the comparator and amplifier-IC family. Its four independent channels allow one package to monitor four thresholds or implement four independent protection functions. Unlike an op-amp, each channel uses open-collector output transistors, so an external pull-up resistor is required to establish a high output voltage.

Key electrical characteristics include a maximum supply voltage of 36 V, a single-supply operating range of 3 V to 36 V, an input bias current as high as 0.25 µA, and an open-collector output architecture. The V suffix identifies the higher-performance grade in the LM2901 family, while NG identifies the onsemi 14-pin PDIP package. The through-hole package supports conventional insertion into a PCB and is available in tube packaging according to the manufacturer distribution information.

The comparator architecture supports sensing signals around the supply rails, including low-level and zero-cross detection. Input stages compare a non-inverting input with an inverting input, and the output transistor changes state as the differential input crosses the comparator threshold. Because the outputs are open collector, multiple channels may share a pull-up resistor and form a wired-AND arrangement. The external pull-up must be sized for the logic family, leakage current, switching speed, and fan-out requirement rather than treated as a fixed output impedance.

Typical uses include industrial sensor interfaces, automotive battery and power-system monitoring, consumer threshold detection, memory-device control, and four-channel supervision in industrial automation. The wide 3 V to 36 V single-supply range also permits operation from regulated 5 V and 12 V rails as well as industrial 24 V systems when the applied voltages remain within the rated limits.

PCB design should reserve the correct 14-pin PDIP footprint, provide a continuous ground path, and place the output pull-up resistors close to the comparator pins to limit switching-loop area. Input traces should be kept away from high-current switching nodes and output return currents. Because the LM2901VNG is a through-hole analog device, additional filtering is generally required when sensing noisy sensor nodes rather than relying on comparator hysteresis alone.

This page combines manufacturer and distributor information with application guidance, comparison criteria, and drop-in replacement research. It highlights electrical limits and package compatibility so engineers can distinguish a true pin-compatible substitution from a merely similar quad comparator before releasing a new PCB.

Alternativas directas para LM2901VNG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM2901VNG (mismo factor de forma y huella) — difiere en Logic Compatibility, Comparator Type, Mounting Type, Package, Number of Channels.

Texas Instruments
Logic Compatibility: TTL, DTL, MOS, ECL, and CMOS output compatibility
Comparator Type: Quad differential comparator
Package: 14-pin DIP
Comparar con LM2901VNG →
Texas Instruments
Logic Compatibility: TTL, DTL, MOS, ECL, and CMOS output compatibility
Comparator Type: Quad differential comparator
Package: 14-pin DIP
onsemi
Logic Compatibility: TTL and CMOS
Comparator Type: Quad differential comparator
Mounting Type: Through-hole
Comparar con LM2901VNG →
onsemi
Logic Compatibility: TTL compatible
Comparator Type: 4-channel differential comparator
Mounting Type: Surface mount
Comparar con LM2901VNG →

LM2901NG

✅ Sustitución directa
onsemi
📦 14-PDIP
Quad differential comparator · 4 channels · 3 V to 36 V · Single supply · Open collector · TTL and CMOS · 130 mV at 4 mA · Includes ground

Consulte el precio

Ver hoja de datos →

LM2901N

✅ Sustitución directa
Texas Instruments
📦 14-PDIP
Quad differential comparator · 4 channels · Single or split supply · 36 V · 25 nA typical · ±5.0 nA typical · 800 µA typical · Open collector

Consulte el precio

Ver hoja de datos →

LM2901MX/NOPB

✅ Sustitución directa
📦 14-PDIP
Pin-compatible functional upgrade with improved input offset voltage and lower quiescent current; exact numeric improvement requires the comparison of both ordering codes.

📋 Alternativa de referencia (no en el catálogo)

LM2901N/PB

✅ Sustitución directa
Texas Instruments
📦 14-PDIP
Quad differential comparator · 4 channels · Single or split supply · 36 V · 25 nA typical · ±5.0 nA typical · 800 µA typical · Open collector

Consulte el precio

Ver hoja de datos →

LM2901VD

✅ Sustitución directa
onsemi
📦 14-PDIP
4-channel differential comparator · 3 V to 36 V · 25 nA typical · ±5.0 nA typical · Open collector · TTL compatible · Single or split supply · 4

Consulte el precio

Ver hoja de datos →

LM2901VNG Valores máximos y características eléctricas

Comparator Type 4 independent general-purpose voltage comparators
Number of Channels 4 channels
Single-Supply Operating Range 3 V to 36 V
Dual-Supply Operating Range ±1.5 V to ±18 V
Maximum Supply Voltage 36 V
Tipo de salida Open collector
Logic Compatibility TTL, CMOS, and MOS compatible
Maximum Input Bias Current 0.25 µA
Encapsulado 14-pin PDIP
Tipo de montaje Through hole
Packaging Tube

Configuración de pines de LM2901VNG

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin 1 OUT 1 — Comparator 1 open-collector output
Pin 2 OUT 2 — Comparator 2 open-collector output
Pin 3 IN 3+ — Comparator 3 non-inverting input
Pin 4 IN 3- — Comparator 3 inverting input
Pin 5 IN 2+ — Comparator 2 non-inverting input
Pin 6 IN 2- — Comparator 2 inverting input
Pin 7 V+ — Positive supply voltage
Pin 8 GND — Ground reference
Pin 9 IN 1+ — Comparator 1 non-inverting input
Pin 10 IN 1- — Comparator 1 inverting input
Pin 11 IN 4+ — Comparator 4 non-inverting input
Pin 12 IN 4- — Comparator 4 inverting input
Pin 13 OUT 4 — Comparator 4 open-collector output
Pin 14 OUT 3 — Comparator 3 open-collector output

Aplicaciones típicas

LM2901VNG es adecuado para 6 aplicacións: Industrial Sensor Threshold Detection, Automotive Power-System Monitoring, Battery Charger Status Detection, Consumer Level and Limit Detection, Memory and Logic Interface, Power-Supply Rail Supervision.

🏭

Industrial Sensor Threshold Detection

The LM2901VNG is appropriate for industrial sensor interfaces that compare a scaled voltage against a reference and produce a logic-level status. Its four independent channels allow one 14-pin PDIP package to monitor four sensor conditions, while its single-supply capability extends to 36 V for 24 V control systems. The open-collector output can sink current into a pull-up network, but input common-mode limits, pull-up voltage, and output-sink capability must remain within the device ratings. Add hysteresis externally where noise or slow sensor transitions could otherwise cause repeated output chatter.

🚗

Automotive Power-System Monitoring

The LM2901VNG can supervise several automotive voltage thresholds because it combines four open-collector comparators with a 3 V to 36 V single-supply capability. Channels may monitor a battery-derived signal, charger condition, or protected rail and indicate when each signal crosses a reference. The open-collector architecture permits wired-AND fault reporting to a higher-level controller. Automotive deployment must additionally confirm the exact ordering code’s temperature range, transient immunity, AEC-Q100 status, and operating qualification before production use.

⚡

Battery Charger Status Detection

The LM2901VNG is useful in battery-powered equipment where multiple voltage thresholds must be translated into digital status signals. Four channels can compare charger, cell, and system-rail voltages against reference levels derived from the supply. Its wide single-supply range supports 3 V to 36 V systems, and the open-collector outputs can be pulled up to the logic rail used by a charger controller. Designers should verify common-mode input limits, input bias current, and pull-up sizing, especially where the sensing node approaches either supply rail.

📱

Consumer Level and Limit Detection

The LM2901VNG can implement four independent level checks in consumer equipment, such as detecting signal presence, comparing divided-down control voltages, or supervising a supply rail. The general-purpose quad arrangement reduces component count when multiple thresholds require the same supply range and output style. Open-collector outputs are compatible with TTL, CMOS, and MOS logic families, allowing the pull-up rail to match the receiving circuit. Select hysteresis and input filtering according to the source impedance and noise environment rather than relying only on the comparator’s nominal switching performance.

🖥️

Memory and Logic Interface

The LM2901VNG can support memory and logic-interface functions requiring several comparisons, such as data validity, state-transition, or control-signal qualification. Four independent comparator channels allow individual thresholds to be monitored without sharing internal signal paths, and the open-collector outputs can be combined when the receiving system expects a wired-AND fault indication. Logic compatibility covers TTL, CMOS, and MOS levels, but the external pull-up voltage and sink current must be selected to match the receiving gate. Account for propagation delay when timing relationships depend on multiple channels.

🔧

Power-Supply Rail Supervision

The LM2901VNG is applicable to multi-rail power-system supervision because four channels can compare divided-down rail voltages against references and report out-of-range conditions. Its 36 V maximum single-supply rating accommodates many industrial and automotive rails, while each open-collector output provides flexible pull-up selection for the supervisor logic. Keep sensing traces away from switching power nodes, use local filtering where necessary, and verify that every sensed voltage stays inside the common-mode range. For a new design, the newer LM2901V family may offer improved supply-current and response characteristics.

What is the operating voltage of LM2901VNG?
The LM2901VNG operates from 3 V to 36 V with a single supply or from ±1.5 V to ±18 V with dual supplies. According to the onsemi LM2901 product information, its maximum supply rating is 36 V. This range supports 5 V, 12 V, and 24 V systems, but designers must also observe the separate common-mode input limits and differential input constraints.
How many comparators are in the LM2901VNG?
The LM2901VNG contains four independent general-purpose voltage comparators. Each channel has its own non-inverting and inverting inputs and an open-collector output, allowing four threshold-detection or protection functions in one package. The manufacturer classifies it as a single-supply quad comparator for level detection, low-level sensing, memory, consumer, automotive, and industrial applications.
Does LM2901VNG need an output pull-up resistor?
Yes, each LM2901VNG output requires an external pull-up resistor because the output stage is open collector. The pull-up establishes the high output level and allows several comparator outputs to share a node for wired-AND operation. Select it according to the receiving logic family, required fan-out, leakage current, and acceptable rise time while confirming that the resulting output voltage remains within the logic-device limits.
What is the LM2901VNG pinout?
The LM2901VNG uses the standard 14-pin comparator arrangement: outputs are pins 1, 2, 13, and 14; inverting inputs are pins 2? No—use the manufacturer pin-description table before routing because channel and input assignments must be verified against the selected datasheet revision. The package also includes supply and ground connections, and the exposed physical lead numbering follows counter-clockwise numbering from pin 1.
Where can I download the LM2901VNG datasheet PDF?
The LM2901VNG datasheet is available through the onsemi LM2901 product family and the linked PDF document page. The product description identifies it as a single-supply quad comparator, while the LM2901VNG document covers the V-grade 14-pin PDIP configuration. Use the onsemi datasheet for final electrical limits, input/output characteristics, and the authoritative pin-description table before PCB release.
LM2901VNG vs LM2901N — which one should I choose?
Choose the LM2901VNG when your design benefits from the V-grade electrical characteristics, and choose LM2901N when the lower-grade device is sufficient for the required offset, bias, and switching limits. Both devices are available in 14-pin PDIP configurations, making the package footprint compatible, but the manufacturer’s comparison should be used to confirm operating-range and temperature requirements for the exact ordering code.
When should I choose LM2901VNG over LM2901NG?
Choose LM2901VNG when the application requires the tighter V-grade performance of the LM2901 family or has a qualification path that explicitly identifies that grade. Choose LM2901NG when its published electrical limits satisfy the sensing threshold and noise requirements. Because the two order codes use the same 14-pin PDIP outline, package interchangeability is straightforward, but electrical equivalence must be checked independently.
What is the best drop-in replacement for LM2901VNG?
The LM2901MX/NOPB is a documented functional and pin-compatible upgrade to the LM2901VNG, with improved input offset voltage and lower quiescent current. Other LM2901-family 14-pin PDIP devices may also fit the footprint, but engineers should verify offset voltage, input bias current, common-mode range, supply limits, response time, and temperature grade before approving a replacement for production.
Can LM2901MX/NOPB replace LM2901VNG?
Yes, the LM2901MX/NOPB is identified as a direct functional and pin-compatible upgrade to the LM2901VNG. The comparison information specifically cites improved input offset voltage and lower quiescent current. Confirm that its 14-pin PDIP pinout and electrical limits match the application, then review operating temperature, output-sink current, and supply-voltage requirements before substitution.
Is LM2901VNG suitable for 24 V industrial control systems?
The LM2901VNG is suitable for many 24 V industrial sensing systems because it supports a single-supply range up to 36 V. Its open-collector outputs can directly sink current into a pull-up network while operating with TTL, CMOS, or MOS-compatible levels. The monitored input and pull-up voltages must still remain inside the common-mode input range, and industrial temperature requirements should be checked separately.
Where can I buy LM2901VNG online?
Use the Request a Quote form on this page to request LM2901VNG availability, current commercial terms, and a lead-time quotation. The form is the appropriate route for a standard catalog component when stock, volume, and purchase quantities must reflect the supplier’s current operations. The manufacturer offers the device in a 14-pin PDIP tube package for through-hole assembly.
What is the price of LM2901VNG?
Current LM2901VNG commercial terms are shown through the Request a Quote form on this page rather than in static prose. Submit the required quantity, target package, and delivery location so the quote reflects current inventory and procurement conditions. The part is a standard onsemi 14-pin PDIP comparator offered through tube-packaged distribution channels.
What is the lead time for LM2901VNG?
The current lead time for LM2901VNG should be confirmed through the Request a Quote form on this page. Request the quantity, tube quantity, and required delivery date to obtain a procurement-specific schedule. onsemi identifies the LM2901VNG as a standard 14-pin PDIP device, and distributor listings indicate tube packaging, but a production schedule should not be inferred from general listing availability.
Is LM2901VNG in stock?
LM2901VNG stock should be confirmed through the Request a Quote form on this page using the required order quantity and delivery location. Distributor catalog pages identify the LM2901VNG as a standard onsemi 14-pin PDIP comparator, but transient catalog availability does not guarantee material for a production build. The quotation response should be used for allocation and scheduling decisions.
What are the key specifications of LM2901VNG that engineers should know?
The LM2901VNG is a four-channel, general-purpose comparator with a 3 V to 36 V single-supply range, ±1.5 V to ±18 V dual-supply range, open-collector outputs, and TTL, CMOS, and MOS compatibility. It is housed in a 14-pin PDIP and is identified as the V-grade onsemi ordering option. Confirm offset, bias, delay, common-mode, and temperature limits in the manufacturer datasheet.
What can replace LM2901VNG?
The LM2901MX/NOPB is the clearest documented replacement because it is described as a functional and pin-compatible upgrade with improved input offset voltage and lower quiescent current. Additional LM2901-family 14-pin PDIP versions may also be candidates, but package shape alone is not sufficient. Verify the complete pinout, supply range, input limits, output-current capability, temperature rating, and qualification before substitution.

Datos de referencia de ingeniería para LM2901VNG — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LM2901VNG for a new through-hole design that needs four general-purpose comparison channels, a 3 V to 36 V single-supply range, and open-collector outputs compatible with TTL, CMOS, or MOS logic. Choose LM2901NG or LM2901N when their published electrical characteristics are adequate and procurement or standardization favors the standard grade. Choose LM2901MX/NOPB when a documented pin-compatible upgrade with improved input offset voltage and lower quiescent current is desirable. Consider Texas Instruments LM2901N/PB for a second-source strategy, and LM2901V when its newer B-version electrical characteristics are required. For every option, verify the exact pinout, common-mode range, differential input limit, temperature grade, output-sink capability, and qualification status before approving a substitution.

Comparación con alternativas

Parámetro Este producto LM2901NG LM2901N LM2901MX/NOPB LM2901N/PB LM2901V
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Brand onsemi onsemi onsemi onsemi Texas Instruments Texas Instruments
Comparator Count 4 4 4 4 4 4
Output Type Open collector Open collector Open collector Open collector Open collector Open collector

Diferenciadores clave

  • Documented functional and pin-compatible upgrade path (frente a LM2901MX/NOPB)
  • Four monitoring functions in one through-hole package (frente a LM2901N)
  • Wide single-supply operating range (frente a LM2901N/PB)

Notas de diseño

Route each open-collector output to its pull-up resistor with a short trace and place the resistor close to the comparator output. A long output trace can increase susceptibility to capacitive pickup and slow the rising edge. If multiple outputs share one pull-up node, confirm that the combined leakage and sink-current requirements remain within the resistor and output-stage ratings.

Keep the two inputs of each channel away from switching-power traces and high-current return paths. High source impedance increases input-bias error and makes the switching point sensitive to leakage. When the source impedance is substantial, add a feedback resistor for bias-current compensation and define hysteresis with positive feedback so slow or noisy sensor transitions do not cause repeated output toggling.

Do not treat the open-collector output as a push-pull logic output. Without a pull-up resistor, the output can only sink current and remains in a high-impedance state when the transistor is off. Also verify that the maximum differential input voltage, common-mode input range, and maximum supply voltage are respected. These limits are separate, and satisfying the 36 V supply rating does not by itself permit a 36 V input at every common-mode condition.

The LM2901VNG is intended for low-power signal comparison rather than supplying load current. Use the open-collector stages to sink the pull-up current and keep that current within the output-current and power-dissipation limits. If the comparator monitors a high-voltage rail, divide the voltage with appropriately rated resistors and confirm that their power dissipation and common-mode limits remain acceptable at the maximum operating voltage.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available manufacturer and distributor descriptions do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements with onsemi for the exact ordering code before regulated production use.

Búsquedas relacionadas

LM2901VNG datasheet LM2901VNG pinout LM2901VNG datasheet pdf LM2901VNG equivalent LM2901VNG replacement LM2901VNG cross reference LM2901VNG vs LM2901N LM2901VNG footprint LM2901VNG price onsemi LM2901VNG LM2901VNG open collector output LM2901VNG 36V comparator

Componentes & términos relacionados

onsemi Texas Instruments LM2901VNG LM2901NG LM2901N LM2901MX/NOPB LM2901N/PB LM2901V quad differential comparator voltage comparator comparator IC amplifier IC integrated circuit semiconductor open-collector output single-supply operation dual-supply operation TTL compatibility CMOS compatibility MOS compatibility input bias current input offset voltage propagation delay common-mode input voltage 14-pin PDIP DIP package through-hole mount level detection industrial sensor monitoring automotive power supervision wired-AND operation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ