LM2903DG vs LM293DG Comparación
Comparación detallada lado a lado de LM2903DG por onsemi y LM293DG por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM2903DG | LM293DG |
|---|---|---|
| Marca | onsemi | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Precision, dual, independent |
| Tipo de salida | Open-collector, rail-to-rail output swing | Open-collector / open-drain |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | Includes ground (single supply operation) |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Rango de temperatura de funcionamiento | -40C to +105C | -25 C to +85 C |
| Encapsulado | SOIC-8 (D suffix), 8 pins | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Tipo de montaje | Surface Mount | Surface Mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Corriente de alimentación | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |