LM2903DG vs LM293DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903DG tarafından onsemi ve LM293DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2903DG | LM293DG |
|---|---|---|
| Marka | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Precision, dual, independent |
| Çıkış Türü | Open-collector, rail-to-rail output swing | Open-collector / open-drain |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | Includes ground (single supply operation) |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| İşletim Sıcaklığı Aralığı | -40C to +105C | -25 C to +85 C |
| Paket | SOIC-8 (D suffix), 8 pins | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Montaj Türü | Surface Mount | Surface Mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Besleme Akımı | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |