LM2903DG vs LM293DG So sánh
So sánh chi tiết song song của LM2903DG bằng onsemi và LM293DG bằng onsemi. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | LM2903DG | LM293DG |
|---|---|---|
| Thương hiệu | onsemi | onsemi |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Number of Channels | 2 (dual independent comparators) | — |
| Comparator Type | General purpose, differential | Precision, dual, independent |
| Kiểu đầu ra | Open-collector, rail-to-rail output swing | Open-collector / open-drain |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | Includes ground (single supply operation) |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| Khoảng nhiệt độ hoạt động | -40C to +105C | -25 C to +85 C |
| Hộp | SOIC-8 (D suffix), 8 pins | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Kiểu lắp đặt | Surface Mount | Surface Mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | as low as 2.0 mV |
| Response Time | — | 1.3 microseconds |
| Điện áp cung cấp | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Channel Independence | — | Fully independent channels |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Output Sink Current | — | [DATA_NEEDED: output sink current rating] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |