LM2903DR vs LM2903DG Comparación
Comparación detallada lado a lado de LM2903DR por Texas Instruments y LM2903DG por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ ActivoComparación de especificaciones
| Parámetro | LM2903DR | LM2903DG |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Channels | 2 channels | 2 (dual independent comparators) |
| Supply Voltage Range | 2 V to 36 V | — |
| Tipo de salida | Open-collector | Open-collector, rail-to-rail output swing |
| Response Time | 300 ns | — |
| Encapsulado | 8-pin SOIC | SOIC-8 (D suffix), 8 pins |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | -40C to +105C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Corriente en reposo | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |