LM2903DR vs LM2903DG तुलना
विस्तृत दोनों ओर की तुलना LM2903DR द्वारा Texas Instruments और LM2903DG द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ सक्रियविशेषता तुलना
| पैरामीटर | LM2903DR | LM2903DG |
|---|---|---|
| ब्रांड | Texas Instruments | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Channels | 2 channels | 2 (dual independent comparators) |
| Supply Voltage Range | 2 V to 36 V | — |
| आउटपुट प्रकार | Open-collector | Open-collector, rail-to-rail output swing |
| Response Time | 300 ns | — |
| पैकेज | 8-pin SOIC | SOIC-8 (D suffix), 8 pins |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | -40C to +105C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| क्वाइसेंट करंट | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |