LM2903DR vs LM2903DG So sánh
So sánh chi tiết song song của LM2903DR bằng Texas Instruments và LM2903DG bằng onsemi. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2903DR | LM2903DG |
|---|---|---|
| Thương hiệu | Texas Instruments | onsemi |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Channels | 2 channels | 2 (dual independent comparators) |
| Supply Voltage Range | 2 V to 36 V | — |
| Kiểu đầu ra | Open-collector | Open-collector, rail-to-rail output swing |
| Response Time | 300 ns | — |
| Hộp | 8-pin SOIC | SOIC-8 (D suffix), 8 pins |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Khoảng nhiệt độ hoạt động | -40 °C to +125 °C | -40C to +105C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Điện áp yên tĩnh | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |