MAX1480BCPI+ vs MAX1480CCPI+ Comparación
Comparación detallada lado a lado de MAX1480BCPI+ por Analog Devices y MAX1480CCPI+ por Maxim Integrated. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActivoMaxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ ActivoComparación de especificaciones
| Parámetro | MAX1480BCPI+ | MAX1480CCPI+ |
|---|---|---|
| Marca | Analog Devices | Maxim Integrated |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Velocidad de datos | 250 kbps | — |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| Encapsulado | 28-PDIP (0.600", 15.24 mm wide) | 28-pin DIP, 0.600 in (15.24 mm) width |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation withstand voltage] |
| Tipo de montaje | Through-Hole | Through-hole |
| Temperatura de funcionamiento | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| Estado RoHS | Compliant | unknown |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Isolated RS-485/RS-422 transceiver |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half duplex |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Isolation | — | Galvanically isolated logic-side and bus-side interfaces |
| Driver Slew Rate | — | Reduced slew rate |
| Supported Standards | — | RS-485 and RS-422 |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |