MAX1480BCPI+ vs MAX1480CCPI+ 比較
詳細並排比較 MAX1480BCPI+ 由 Analog Devices 與 MAX1480CCPI+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ 啟用中規格比較
| 參數 | MAX1480BCPI+ | MAX1480CCPI+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 資料速率 | 250 kbps | — |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| 封裝 | 28-PDIP (0.600", 15.24 mm wide) | 28-pin DIP, 0.600 in (15.24 mm) width |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation withstand voltage] |
| 安裝類型 | Through-Hole | Through-hole |
| 工作溫度 | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| RoHS 狀態 | Compliant | unknown |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Isolated RS-485/RS-422 transceiver |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half duplex |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Isolation | — | Galvanically isolated logic-side and bus-side interfaces |
| Driver Slew Rate | — | Reduced slew rate |
| Supported Standards | — | RS-485 and RS-422 |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |