MAX1480BCPI+ vs MAX1480CCPI+ 比較
詳細な並列比較: MAX1480BCPI+ メーカー: Analog Devices および MAX1480CCPI+ メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ 生産中仕様比較
| パラメータ | MAX1480BCPI+ | MAX1480CCPI+ |
|---|---|---|
| ブランド | Analog Devices | Maxim Integrated |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| データレート | 250 kbps | — |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| パッケージ | 28-PDIP (0.600", 15.24 mm wide) | 28-pin DIP, 0.600 in (15.24 mm) width |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | [DATA_NEEDED: isolation withstand voltage] |
| 実装タイプ | Through-Hole | Through-hole |
| 動作温度 | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| RoHS ステータス | Compliant | unknown |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Isolated RS-485/RS-422 transceiver |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half duplex |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Isolation | — | Galvanically isolated logic-side and bus-side interfaces |
| Driver Slew Rate | — | Reduced slew rate |
| Supported Standards | — | RS-485 and RS-422 |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| 静止電流 | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |